The variation of atmospheric potential is caused due to: (A) Difference in temperature over the surface of the earth (B) Change in the density of air (C) Both (a) and (b) (D) Neither (a) nor (b)

The variation of atmospheric potential is caused due to:
(A) Difference in temperature over the surface of the earth
(B) Change in the density of air
(C) Both (a) and (b)
(D) Neither (a) nor (b)
by

1 Answer

Answer :

(C) Both (a) and (b)
by

Related questions

Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater number of blades (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater ... (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

How does the flow of air occur in natural draught cooling towers? a) Natural pressure head density between cold outside air and humid inside air b) Variation in pressure of both cold outside air and humid inside air c) Due to the given air vents and vacuum ports d) Because of difference in the volume of both the of airs

Description : How does the flow of air occur in natural draught cooling towers? a) Natural pressure head density between cold outside air and humid inside air b) Variation in pressure of both cold outside air and ... given air vents and vacuum ports d) Because of difference in the volume of both the of airs

Last Answer : Natural pressure head density between cold outside air and humid inside air

How does the flow of air occur in natural draught cooling towers? a) Natural pressure head density between cold outside air and humid inside air b) Variation in pressure of both cold outside air and humid inside air c) Due to the given air vents and vacuum ports d) Because of difference in the volume of both the of airs

Description : How does the flow of air occur in natural draught cooling towers? a) Natural pressure head density between cold outside air and humid inside air b) Variation in pressure of both cold outside air and ... given air vents and vacuum ports d) Because of difference in the volume of both the of airs

Last Answer : Natural pressure head density between cold outside air and humid inside air

Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by the force of adhesion between liquid molecules c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Description : Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by ... it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Last Answer : c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions

A volume of air at constant barometric pressure may be brought to dew point by (A) Increasing the temperature (B) Decreasing the temperature (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : A volume of air at constant barometric pressure may be brought to dew point by (A) Increasing the temperature (B) Decreasing the temperature (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option B

Breathing loss" on storage of gasoline occurs due to the (A) Presence of unsaturated air (B) Fluctuation of ambient temperature during day and night (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Breathing loss" on storage of gasoline occurs due to the (A) Presence of unsaturated air (B) Fluctuation of ambient temperature during day and night (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Fluctuation of ambient temperature during day and night

For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Factor of safety against sliding of a slope, is the ratio of (A) Actual cohesion to that required to maintain stability of slope (B) Shear strength to shear stress along the surface (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : Factor of safety against sliding of a slope, is the ratio of (A) Actual cohesion to that required to maintain stability of slope (B) Shear strength to shear stress along the surface (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The free water is the amount of water added while mixing and the amount of water held on the surface of the aggregates prior to mixing (B) The total water is the free water and the amount actually absorbed by the aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : Pick up the correct statement from the following: (A) The free water is the amount of water added while mixing and the amount of water held on the surface of the aggregates prior to mixing (B) The total water ... actually absorbed by the aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) The earth work in trenches or borrow pits in irregular ground is measured by taking the difference in levels before and after completion of work (C) The earth work in trenches or borrow pits, where neither a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Description : Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) ... a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Last Answer : (D) All the above

What happens when a chemical bond is formed? (1) energy is always absorbed (2) energy in always released (3) more energy is released than is absorbed (4) energy is neither released nor absorbed Correct (4) Answer – (1) energy is always absorbed Explanation: If a bond is broken, energy is released; and if a bond is formed, energy must have been absorbed. As these occur, a change in the chemical energy of the system also occurs. Within each bond of a molecule is an experimentally determined amount of enemy that upon the breaking of that bond is released into the chemical system. The energy within these bonds are 'stored' and can be easily thought of as potential energy. Upon the breaking of these bonds the energy is released thereby creating usable energy.

Description : What happens when a chemical bond is formed? (1) energy is always absorbed (2) energy in always released (3) more energy is released than is absorbed (4) energy is neither released nor ... as potential energy. Upon the breaking of these bonds the energy is released thereby creating usable energy.

Last Answer : Silver nitrate solution is kept in brown bottles in laboratory because - (1) it reacts with ordinary white bottles (2) brown bottles stops the passage of light through it (3) brown bottles do not react with it (4) brown bottles react with it

For __________ drying, the effects of velocity, temperature and humidity of the gas and the thickness of the solid are the same. (A) Unsaturated surface (B) Constant rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For __________ drying, the effects of velocity, temperature and humidity of the gas and the thickness of the solid are the same. (A) Unsaturated surface (B) Constant rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The heating capacity of muffle furnace depends on the (A) Surface area & emissivity of the stock (B) Properties of the muffle wall (temperature, area, and emissivity) (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The heating capacity of muffle furnace depends on the (A) Surface area & emissivity of the stock (B) Properties of the muffle wall (temperature, area, and emissivity) (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Consider the following statements: 1. Organic matter decreases the permeability of a soil. 2. Entrapped air decreases the permeability of a soil. Which of these statements are correct? (a) 1 only (b) 2 only (c) Both 1 &2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. Organic matter decreases the permeability of a soil. 2. Entrapped air decreases the permeability of a soil. Which of these statements are correct? (a) 1 only (b) 2 only (c) Both 1 &2 (d) Neither 1 nor 2

Last Answer : (c) Both 1 &2

Spatial variation in horizontal and vertical directions is caused due to: (A) Physical weathering of rocks (B) Chemical weathering of rocks (C) Biological weathering of rocks (D) All of these

Description : Spatial variation in horizontal and vertical directions is caused due to: (A) Physical weathering of rocks (B) Chemical weathering of rocks (C) Biological weathering of rocks (D) All of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The refractive index of a medium varies according to the wavelength of the radiation, (B) The variation of the refractive index with wave length, is called dispersion, (C) The splitting of colours of white light by passing through a prism is caused due to dispersion (D) All of these

Description : Pick up the correct statement from the following: (A) The refractive index of a medium varies according to the wavelength of the radiation, (B) The variation of the refractive index with wave length, ... of white light by passing through a prism is caused due to dispersion (D) All of these

Last Answer : Answer: Option D

With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pick up the correct statement from the following: (A) The rate of change of bending moment is equal to rate of shear force (B) The rate of change of shear force is equal to rate of loading (C) Neither (a) nor (b)(D) Both (a) and (b

Description : Pick up the correct statement from the following: (A) The rate of change of bending moment is equal to rate of shear force (B) The rate of change of shear force is equal to rate of loading (C) Neither (a) nor (b) (D) Both (a) and (b

Last Answer : (D) Both (a) and (b

The length of a transition curve, is governed by (A) Rate of change of radial acceleration (B) Rate of change of super-elevation (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : The length of a transition curve, is governed by (A) Rate of change of radial acceleration (B) Rate of change of super-elevation (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : Answer: Option C

The different colours of different stars are due to the variation of – (1) temperature (2) pressure (3) density (4) radiation from them

Description : The different colours of different stars are due to the variation of – (1) temperature (2) pressure (3) density (4) radiation from them

Last Answer : (1) temperature Explanation: Shortly after blackbody radiation was understood, it was noticed that the spectra of stars look extremely similar to blackbody radiation curves of various temperatures, ... and that the colour variation of stars is a direct consequence of their surface temperatures.

The different colours of different stars are due to the variation of (1) temperature (2) pressure (3) density (4) radiation from them

Description : The different colours of different stars are due to the variation of (1) temperature (2) pressure (3) density (4) radiation from them

Last Answer : temperature

Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (C) Both 'a' & 'b

In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

During constant rate period, the rate of drying decreases with the (A) Decrease in air temperature (B) Increase in air humidity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : During constant rate period, the rate of drying decreases with the (A) Decrease in air temperature (B) Increase in air humidity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Use of natural draft cooling tower is practised, when the air has low (A) Humidity (B) Temperature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : Use of natural draft cooling tower is practised, when the air has low (A) Humidity (B) Temperature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b

Adiabatic flame temperature of a fuel is dependent on the initial temperature of (A) Fuel (B) Air (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Adiabatic flame temperature of a fuel is dependent on the initial temperature of (A) Fuel (B) Air (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Consider the following statements: 1. Over the oceans there is more evaporation than precipitation. 2. On land it is more precipitation than evapo-transpiration. Which of these statements are correct? (a) Both 1 & 2 (b) Neither 1 nor 2 (c) 1 only (d) 2 only

Description : Consider the following statements: 1. Over the oceans there is more evaporation than precipitation. 2. On land it is more precipitation than evapo-transpiration. Which of these statements are correct? (a) Both 1 & 2 (b) Neither 1 nor 2 (c) 1 only (d) 2 only

Last Answer : (a) Both 1 & 2

Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

In Banking Services, Market can be segmented on the basis of 1. Density 2. Customers 3. Both 1 & 2 4. Neither 1 nor 2 5. None of these

Description : In Banking Services, Market can be segmented on the basis of 1. Density 2. Customers 3. Both 1 & 2 4. Neither 1 nor 2 5. None of these

Last Answer : Both 1 & 2

Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The function of gypsum addition during cement making is to (A) Increase the density of cement (B) Decrease the cement setting rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The function of gypsum addition during cement making is to (A) Increase the density of cement (B) Decrease the cement setting rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Decrease the cement setting rate

Effect caused partly by act and partly by omission is a) The effect caused partly by act is offence b) The effect caused partly by omission is offence c) Both a & b d) Neither a nor b

Description : Effect caused partly by act and partly by omission is  a) The effect caused partly by act is offence b) The effect caused partly by omission is offence c) Both a & b d) Neither a nor b

Last Answer : c) Both a & b

Stress concentration is caused due to A. Variation in properties of material from point to point in a member B. Pitting at points or areas at which loads on a member are applied C. Abrupt change of section D. All of the above

Description : Stress concentration is caused due to A. Variation in properties of material from point to point in a member B. Pitting at points or areas at which loads on a member are applied C. Abrupt change of section D. All of the above

Last Answer : D. All of the above

A moving bullet hits a solid target resting on a frictionless surface and gets embedded in it. What is conserved in this process? (a) Both momentum and kinetic energy (b) Kinetic energy alone (c) Momentum alone (d) Neither momentum nor kinetic energy

Description : A moving bullet hits a solid target resting on a frictionless surface and gets embedded in it. What is conserved in this process? (a) Both momentum and kinetic energy (b) Kinetic energy alone (c) Momentum alone (d) Neither momentum nor kinetic energy

Last Answer : Ans:(c)

Additives used for promoting the flocculation of particles is a/an (A) Electrolyte (B) Surface active agent (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Additives used for promoting the flocculation of particles is a/an (A) Electrolyte (B) Surface active agent (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Capacity of a rotary dryer depends on its (A) rpm (B) Inclination with ground surface (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Capacity of a rotary dryer depends on its (A) rpm (B) Inclination with ground surface (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Sulphur in metallurgical coal (A) Contributes to its heating value (B) Affects the quality of steel produced as cracks develop on the surface while rolling the steel (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Sulphur in metallurgical coal (A) Contributes to its heating value (B) Affects the quality of steel produced as cracks develop on the surface while rolling the steel (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Velocity of sound waves through any material depends on A. the material's density ‘d’ only B. the material's density ‘d’ as well as its modulus of elasticity ‘E’ C. the material's modulus of elasticity ‘E’ only D. neither the material's density ‘d’ nor its modulus of elasticity ‘E’

Description : Velocity of sound waves through any material depends on A. the material's density ‘d’ only B. the material's density ‘d’ as well as its modulus of elasticity ‘E’ C. the material's modulus of elasticity ‘E’ only D. neither the material's density ‘d’ nor its modulus of elasticity ‘E’

Last Answer : the material's density ‘d’ as well as its modulus of elasticity ‘E’

A hydrogen filled balloon rises in air because (a) The atmospheric pressure decreases with altitude (b) The acceleration due to gravity decreases with altitude (c) The density of air decreases with altitude (d) The buoyant force exerted by the air on the balloon is greater than the weight of the balloon

Description : A hydrogen filled balloon rises in air because (a) The atmospheric pressure decreases with altitude (b) The acceleration due to gravity decreases with altitude (c) The density of air decreases with ... The buoyant force exerted by the air on the balloon is greater than the weight of the balloon

Last Answer : Ans:(d)

Which of the following statements is/are correct? 1. The earth revolves around the sun in an elliptical orbit. 2. The sun always attracts the earth with the same force. (a) Both (b) Neither 1 nor 2 (c) 1 only (d) 2 only

Description : Which of the following statements is/are correct? 1. The earth revolves around the sun in an elliptical orbit. 2. The sun always attracts the earth with the same force. (a) Both (b) Neither 1 nor 2 (c) 1 only (d) 2 only

Last Answer : Ans:(c)

In a reservoir the average volume of sediment deposition is 0.15 million cubic per year. If the dead storage and total capacity of the reservoir are 8 million cubic metres and 36 million cubic metres respectively, (A) The reservoir will theoretically be silted in 240 years (B) The reservoir will start reducing after 60 years (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : In a reservoir the average volume of sediment deposition is 0.15 million cubic per year. If the dead storage and total capacity of the reservoir are 8 million cubic metres and 36 million cubic metres respectively, (A) The ... reducing after 60 years (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b)

Check valves are installed (A) On the delivery side of the pumping set (B) At the interconnections between polluted water system and a potable water system (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : Check valves are installed (A) On the delivery side of the pumping set (B) At the interconnections between polluted water system and a potable water system (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b)

A centrifugal pump is required to be primed before starting if it is located (A) At higher level than water level of reservoir (B) At lower level than water level of reservoir (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : A centrifugal pump is required to be primed before starting if it is located  (A) At higher level than water level of reservoir  (B) At lower level than water level of reservoir  (C) Both (a) and (b)  (D) Neither (a) nor (b) 

Last Answer : (A) At higher level than water level of reservoir

shaft subjected to a bending moment M and a torque T, experiences (A) Maximum bending stress = 32M d 3 (B) Maximum shear stress = 16 T d 3 (C) Both (a) and (b) (D) Neither (a) nor (b)

Description :  shaft subjected to a bending moment M and a torque T, experiences  (A) Maximum bending stress = 32M d 3 (B) Maximum shear stress = 16 T d 3 (C) Both (a) and (b)  (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b) 

The slope correction may be ignored if (A) The slope of the ground is less than 3° (B) To slope of the ground is say 1 in 19 (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : The slope correction may be ignored if  (A) The slope of the ground is less than 3°  (B) To slope of the ground is say 1 in 19  (C) Both (a) and (b)  (D) Neither (a) nor (b) 

Last Answer : (C) Both (a) and (b

The Huygens telescope eye piece (A) Is aplanatic (B) Achromatic (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : The Huygens telescope eye piece (A) Is aplanatic (B) Achromatic (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b)

In levelling operation (A) When the instrument is being shifted, the staff must not be moved (B) When the staff is being carried forward, the instrument must remain stationary (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : In levelling operation (A) When the instrument is being shifted, the staff must not be moved (B) When the staff is being carried forward, the instrument must remain stationary (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b)