The rate of payment is made for 100 cu m (per % cu m) in case of (A) Earth work in excavation (B) Rock cutting (C) Excavation in trenches for foundation (D) All the above

The rate of payment is made for 100 cu m (per % cu m) in case of
(A) Earth work in excavation
(B) Rock cutting
(C) Excavation in trenches for foundation
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) The earth work in trenches or borrow pits in irregular ground is measured by taking the difference in levels before and after completion of work (C) The earth work in trenches or borrow pits, where neither a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Description : Pick up the correct statement from the following: (A) The earth work of cutting in trenches or borrow pits in fairly uniform ground is measured with the help of average depths of the dead men (B) ... a nor b is feasible, are measured from the fillings after deduction of voids (D) All the above

Last Answer : (D) All the above

Pick up the excavation where measurements are made in square metres for payment. (A) Ordinary cuttings up to 1 m (B) Surface dressing up to 15 cm depths (C) Surface excavation up to 30 cm depths (D) Both (b) and (c)

Description : Pick up the excavation where measurements are made in square metres for payment. (A) Ordinary cuttings up to 1 m (B) Surface dressing up to 15 cm depths (C) Surface excavation up to 30 cm depths (D) Both (b) and (c)

Last Answer : (D) Both (b) and (c)

Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Description : Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Last Answer : (D) All the above

Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow trenches (C) Shallow foundations can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Description : Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow ... can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Last Answer : Answer: Option D

The excavation exceeding 1.5 m in width and 10 sq.m in plan area with a depth not exceeding 30 cm, is termed as (A) Excavation (B) Surface dressing (C) Cutting (D) Surface excavation

Description : The excavation exceeding 1.5 m in width and 10 sq.m in plan area with a depth not exceeding 30 cm, is termed as (A) Excavation (B) Surface dressing (C) Cutting (D) Surface excavation

Last Answer : (D) Surface excavation

Which one of the following represents an activity? (A) Excavation for foundation (B) Curing of concrete (C) Setting of question paper (D) All the above

Description : Which one of the following represents an activity? (A) Excavation for foundation (B) Curing of concrete (C) Setting of question paper (D) All the above

Last Answer : (D) All the above

For providing a raft foundation, the following activities are involved 1. Ramming the foundation bed 2. Excavation of the soil upto required depth 3. Laying the reinforcement over the foundation bed 4. Curing the cement concrete placed over reinforcement 5. Pouring the cement concrete over the reinforcement The correct sequence is (A) 1, 2, 3, 4, 5 (B) 5, 4, 3, 2, 1 (C) 2, 1, 3, 5, 4 (D) 3, 2, 5, 1,

Description : For providing a raft foundation, the following activities are involved 1. Ramming the foundation bed 2. Excavation of the soil upto required depth 3. Laying the reinforcement over the foundation bed 4. Curing the cement concrete placed over ... 2, 1 (C) 2, 1, 3, 5, 4 (D) 3, 2, 5, 1, 4

Last Answer : Answer: Option C

The expected out turn for earth work in excavation in ordinary soil per workman per day is (A) 1.00 cum (B) 2.00 cum (C) 3.00 cum (D) 4.00 cum

Description : The expected out turn for earth work in excavation in ordinary soil per workman per day is (A) 1.00 cum (B) 2.00 cum (C) 3.00 cum (D) 4.00 cum

Last Answer : (C) 3.00 cum

If the excavation of earth is done manually then it costs Rs. 10 per cum. A machine can excavate at a fixed cost of Rs. 4000 plus a variable cost of Rs. 2 per cum. The quantity of earth for which the cost of excavation by machine will be equal to the cost of manual excavation is (A) 500 cum (B) 1000 cum (C) 1500 cum (D) 2000 cum

Description : If the excavation of earth is done manually then it costs Rs. 10 per cum. A machine can excavate at a fixed cost of Rs. 4000 plus a variable cost of Rs. 2 per cum. The quantity of earth for which the cost ... the cost of manual excavation is (A) 500 cum (B) 1000 cum (C) 1500 cum (D) 2000 cum

Last Answer : (A) 500 cum

Pick up the correct statement from the following: (A) In order to check up the average depth of excavation, 'Dead man s' are left at the midwidths of borrow pits (B) The earthwork calculation in excavation is made from the difference in levels obtained with a level (C) The earth work in excavation to form the road embankment includes the formation of correct profile and depositing the soil in layers (D) All the above

Description : Pick up the correct statement from the following: (A) In order to check up the average depth of excavation, 'Dead man s' are left at the midwidths of borrow pits (B) The earthwork ... embankment includes the formation of correct profile and depositing the soil in layers (D) All the above

Last Answer : (D) All the above

The brick work is not measured in cu m in case of (A) One or more than one brick wall (B) Brick work in arches (C) Reinforced brick work (D) Half brick wall

Description : The brick work is not measured in cu m in case of (A) One or more than one brick wall (B) Brick work in arches (C) Reinforced brick work (D) Half brick wall

Last Answer : (D) Half brick wall

A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs involved are Rs. 20 per man-hour and Rs. 500 per machine-hour. The total quantity of excavation is estimated to be 4,000 cum. The optimal quantity of excavation to be done manually for minimum total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Description : A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs ... total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Last Answer : (d) 2500 cum

Deviation of the actual road gradient from the proposed contour gradient uphill side, involves (A) Embankment on the centre line (B) Excavation on the centre line (C) Earth work on the centre line (D) None of these

Description : Deviation of the actual road gradient from the proposed contour gradient uphill side, involves  (A) Embankment on the centre line  (B) Excavation on the centre line  (C) Earth work on the centre line  (D) None of these

Last Answer : (B) Excavation on the centre line 

The following item of earth work is not measured separately. (A) Setting out of works (B) Site clearance (C) Steps in deep excavation (D) All the above

Description : The following item of earth work is not measured separately. (A) Setting out of works (B) Site clearance (C) Steps in deep excavation (D) All the above

Last Answer : (D) All the above

The single stage well point system of dewatering an excavation can be used if the depth of excavation does not exceed (A) 5 m (B) 10 m (C) 15 m (D) 20 m

Description : The single stage well point system of dewatering an excavation can be used if the depth of excavation does not exceed (A) 5 m (B) 10 m (C) 15 m (D) 20 m

Last Answer : Answer: Option A

The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is A. 204 cu.m B. 208 cu.m C. 212 cu.m D. 216 cu.m

Description : The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is A. 204 cu.m B. 208 cu.m C. 212 cu.m D. 216 cu.m

Last Answer : ANS: D

A raft foundation is provided if its area exceeds the plan area of the building by (A) 10 % (B) 20 % (C) 40 % (D) 50 %

Description : A raft foundation is provided if its area exceeds the plan area of the building by (A) 10 % (B) 20 % (C) 40 % (D) 50 %

Last Answer : Answer: Option D

According to the recommendations of Nagpur Conference, the width formation of an ideal National Highway in hard rock cutting, is (A) 8.9 m (B) 7.9 m (C) 6.9 m (D) 6.5 m

Description : According to the recommendations of Nagpur Conference, the width formation of an ideal National Highway in hard rock cutting, is (A) 8.9 m (B) 7.9 m (C) 6.9 m (D) 6.5 m

Last Answer : Answer: Option B

Grillage foundation (A) Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity (B) Is light and economical (C) Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth (D) All the above

Description : Grillage foundation (A) Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity (B) Is light and economical (C) Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth (D) All the above

Last Answer : Answer: Option D

Brass is an alloy of copper and zinc having the relative percentage (A) 60-70% Cu and 30-40% Zn (B) 50-60% Cu and 40-50% Zn (C) 40-50 % Cu and 60-50% Zn (D) 30-40 % Cu and 60-70% Zn

Description : Brass is an alloy of copper and zinc having the relative percentage (A) 60-70% Cu and 30-40% Zn (B) 50-60% Cu and 40-50% Zn (C) 40-50 % Cu and 60-50% Zn (D) 30-40 % Cu and 60-70% Zn

Last Answer : A) 60-70% Cu and 30-40% Zn

The measurement is made in square metre in case of (A) Cement concrete in foundation (B) R.C.C. structure (C) Hollow concrete block wall (D) None of these

Description : The measurement is made in square metre in case of (A) Cement concrete in foundation (B) R.C.C. structure (C) Hollow concrete block wall (D) None of these

Last Answer : (D) None of these

Seepage through foundation in an earthen dam is controlled by providing (A) Rock toe (B) Horizontal blanket (C) Impervious cut off (D) Chimney drain

Description : Seepage through foundation in an earthen dam is controlled by providing (A) Rock toe (B) Horizontal blanket (C) Impervious cut off (D) Chimney drain

Last Answer : Answer: Option C

Earth is divided into following three layers? a. Crust, Mountains, Oceans b. Crust, Mantle, Trenches c. Trenches, Mountains, Core d. Crust, Mantel, Core (Answer)

Description : Earth is divided into following three layers? a. Crust, Mountains, Oceans b. Crust, Mantle, Trenches c. Trenches, Mountains, Core d. Crust, Mantel, Core (Answer)

Last Answer : d. Crust, Mantel, Core (Answer)

Seepage through embankments in an earthen dam is controlled by (A) Drainage filters (B) Relief wells (C) Drain trenches (D) Provision of downstream berms

Description : Seepage through embankments in an earthen dam is controlled by (A) Drainage filters (B) Relief wells (C) Drain trenches (D) Provision of downstream berms

Last Answer : Answer: Option C

A square-based tank of capacity 250 cu m has to bedug out. The cost of land is Rs 50 per sq m. The cost of digging increases with the depth and for th

Description : A square-based tank of capacity 250 cu m has to bedug out. The cost of land is Rs 50 per sq m. The cost of digging increases with the depth and for th

Last Answer : A square-based tank of capacity 250 cu m has to bedug out. The cost of land is Rs 50 per ... the dimensions of the tank for the least total cost.

The width of a settling tank with 2 hour detention period for treating sewage 378 cu m per hour, is A. 5 m B. 5.5 m C. 6.5 m D. 7 m

Description : The width of a settling tank with 2 hour detention period for treating sewage 378 cu m per hour, is A. 5 m B. 5.5 m C. 6.5 m D. 7 m

Last Answer : ANS: D

channel is said to be of most economical cross-section, if (A) It gives maximum discharge for a given cross-sectional area and bed slope (B) It has minimum wetted perimeter (C) It involves lesser excavation for the designed amount of discharge (D) All of the above

Description : channel is said to be of most economical cross-section, if (A) It gives maximum discharge for a given cross-sectional area and bed slope (B) It has minimum wetted perimeter (C) It involves lesser excavation for the designed amount of discharge (D) All of the above

Last Answer : Answer: Option D

The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is (A) Rs. 400 (B) Rs. 425 (C) Rs. 450 (D) Rs. 500

Description : The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is (A) Rs. 400 (B) Rs. 425 (C) Rs. 450 (D) Rs. 500

Last Answer : (C) Rs. 450

In the given figure, the network of a project represents (A) Activity of an excavation of a footing (B) Activity of an excavation which starts at event No. 1 and ends at even No. 2 (C) Activity of excavation which takes 8 units of time (D) None of thes

Description : In the given figure, the network of a project represents (A) Activity of an excavation of a footing (B) Activity of an excavation which starts at event No. 1 and ends at even No. 2 (C) Activity of excavation which takes 8 units of time (D) None of thes

Last Answer : (C) Activity of excavation which takes 8 units of time

The depth of excavation of foundations, is generally measured with a (A) Ranging rod (B) Steel tape (C) Levelling staff (D) Boning rod

Description : The depth of excavation of foundations, is generally measured with a (A) Ranging rod (B) Steel tape (C) Levelling staff (D) Boning rod

Last Answer : Answer: Option D

If the depth of an excavation is 20 metres, number of single stage well points to be installed at various levels, is (A) 5 (B) 4 (C) 3 (D) 2

Description : If the depth of an excavation is 20 metres, number of single stage well points to be installed at various levels, is (A) 5 (B) 4 (C) 3 (D) 2

Last Answer : Answer: Option C

The expected out turn of brick work in cement mortar in foundation and plinth per mason per day, is (A) 1.00 m3 (B) 1.25 m3 (C) 1.50 m3 (D) 1.75 m3

Description : The expected out turn of brick work in cement mortar in foundation and plinth per mason per day, is (A) 1.00 m3 (B) 1.25 m3 (C) 1.50 m3 (D) 1.75 m3

Last Answer : (B) 1.25 m3

A 3% downgrade curve is followed by a 1% upgrade curve and rate of change of grade adopted is 0.1% per 20 m length. The length of the respective vertical curve is : (a) 800 m (b) 200 m (c) 100 m (d) 400 m

Description : A 3% downgrade curve is followed by a 1% upgrade curve and rate of change of grade adopted is 0.1% per 20 m length. The length of the respective vertical curve is : (a) 800 m (b) 200 m (c) 100 m (d) 400 m

Last Answer : (a) 800 m

Vegetative propagation by stem cutting is generally foundation of which plant? -General Knowledge

Description : Vegetative propagation by stem cutting is generally foundation of which plant? -General Knowledge

Last Answer : The answer is 'Sugarcane'

Vegetative propagation by stem cutting is generally foundation of which plant? -General Knowledge

Description : Vegetative propagation by stem cutting is generally foundation of which plant? -General Knowledge

Last Answer : answer:

FGC and MGM Stands for- a. Foundation of Gender court and modern gender. b. Federation of gender council and modern group of men. c. Female Genital Cutting and Male Genital Mutilation . d. All of these.

Description : FGC and MGM Stands for- a. Foundation of Gender court and modern gender. b. Federation of gender council and modern group of men. c. Female Genital Cutting and Male Genital Mutilation . d. All of these.

Last Answer : c. Female Genital Cutting and Male Genital Mutilation .

Which of the following conditions of loading imposes the greatest load on the foundation in case of dry docks? (A) When the dock is empty (B) When the dock is empty with the ship of maximum tonnage (C) When the dock is full of water (D) When the dock is dry and is under construction

Description : Which of the following conditions of loading imposes the greatest load on the foundation in case of dry docks? (A) When the dock is empty (B) When the dock is empty with the ship of maximum tonnage (C) When the dock is full of water (D) When the dock is dry and is under construction

Last Answer : (C) When the dock is full of water

In case of foundations on black cotton soils, the most suitable method to increase the bearing capacity of soils is to (A) Increase the depth of foundation (B) Drain the soil (C) Compact the soil (D) Replace the poor soil

Description : In case of foundations on black cotton soils, the most suitable method to increase the bearing capacity of soils is to (A) Increase the depth of foundation (B) Drain the soil (C) Compact the soil (D) Replace the poor soil

Last Answer : Answer: Option D

Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the footing. 3. Size effects in plate load tests are more important in case of cohesionless soils. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the ... , 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (d) 1 & 3 only

A vibrating machine of 100 kg is mounted on a rubber pad which has stiffness of 500 N/m. Determine force transmitted to the foundation if the unbalanced force 500 N acts on it. The frequency ratio (ω/ω n ) is 1.5 and ξ = 0.5 A. 461.62 N B. 400.23 N C. 450 N D. Insufficient data

Description : A vibrating machine of 100 kg is mounted on a rubber pad which has stiffness of 500 N/m. Determine force transmitted to the foundation if the unbalanced force 500 N acts on it. The frequency ratio (ω/ω n ) is 1.5 and ξ = 0.5 A. 461.62 N B. 400.23 N C. 450 N D. Insufficient data

Last Answer : A. 461.62 N

Minimum isolation distance maintained for foundation seed production in Cotton is — m a. 1000 b. 100 c. 50 d. 200

Description : Minimum isolation distance maintained for foundation seed production in Cotton is — m a. 1000 b. 100 c. 50 d. 200

Last Answer : c. 50

The maximum total settlement for raft foundation on clayey soils should be limited to (A) 25 mm (B) 25 to 40 mm (C) 40 to 65 mm (D) 65 to 100 mm

Description : The maximum total settlement for raft foundation on clayey soils should be limited to (A) 25 mm (B) 25 to 40 mm (C) 40 to 65 mm (D) 65 to 100 mm

Last Answer : Answer: Option D

The minimum depth of foundation in clayey soils is (A) 0.5 m (B) 0.7 m (C) 0.9 m (D) 1.2 m

Description : The minimum depth of foundation in clayey soils is (A) 0.5 m (B) 0.7 m (C) 0.9 m (D) 1.2 m

Last Answer : Answer: Option C

The camber for hill roads in case of bituminous surfacing is adopted as (A) 2 % (B) 2.5 % (C) 3 % (D) 4 %

Description : The camber for hill roads in case of bituminous surfacing is adopted as (A) 2 % (B) 2.5 % (C) 3 % (D) 4 %

Last Answer : Answer: Option B

In case of hand mixing of concrete, the extra cement to be added is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Description : In case of hand mixing of concrete, the extra cement to be added is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (B) 10 %

In working stress design, permissible bond stress in the case of deformed bars is more than that in plain bars by (A) 10 % (B) 20 % (C) 30 % (D) 40 %

Description : In working stress design, permissible bond stress in the case of deformed bars is more than that in plain bars by (A) 10 % (B) 20 % (C) 30 % (D) 40 %

Last Answer : (D) 40 %

Does Askfortask get a % of your payment whenever you get tasks done in Canada?

Description : Does Askfortask get a % of your payment whenever you get tasks done in Canada?

Last Answer : It appears that you are an independent micro worker or what you might call a freelancer. You will download and install the app on your phone. Inside the app are different micro jobs or tasks that you can complete ... won't get hurt on the job. Because if you do, there is no compensation for this.

In case of an offence punished with fine only, an offender who is sentenced to pay a fine exceeding Rs. 100, the imprisonment in default of payment of fine shall not exceed (a) Two months (b) Three months (c) Four months (d) Six months

Description : In case of an offence punished with fine only, an offender who is sentenced to pay a  fine exceeding Rs. 100, the imprisonment in default of payment of fine shall not exceed (a) Two months (b) Three months (c) Four months (d) Six months

Last Answer : (d) Six months.

In case of an offence punished with fine only, an offender who is sentenced to pay a fine of not exceeding Rs. 100 but exceeding Rs. 50, the imprisonment in default of payment of fine shall not exceed (a) Two months (b) Three months (c) Four months (d) Six months.

Description : In case of an offence punished with fine only, an offender who is sentenced to pay a  fine of not exceeding Rs. 100 but exceeding Rs. 50, the imprisonment in default of  payment of fine shall not exceed (a) Two months (b) Three months (c) Four months (d) Six months.

Last Answer : (c) Four months