A traffic rotary is justified where (A) Number of intersecting roads is between 4 and 7 (B) Space is limited and costly (C) When traffic volume is less than 500 vehicles per hour (D) When traffic volume is more than 5000 vehicles per hour

A traffic rotary is justified where
(A) Number of intersecting roads is between 4 and 7
(B) Space is limited and costly
(C) When traffic volume is less than 500 vehicles per hour
(D) When traffic volume is more than 5000 vehicles per hour
by

1 Answer

Answer :

Answer: Option A
by

Related questions

When a driver stops at an intersection because traffic is backed up, German law requires the driver to leave enough space for vehicles on the intersecting street to clear the intersection.?

Description : When a driver stops at an intersection because traffic is backed up, German law requires the driver to leave enough space for vehicles on the intersecting street to clear the intersection.?

Last Answer : This isn't really a question. Just a statement. It makes sense to not block the intersection when there's traffic. I hate when people do that.

At intersection of roads, the traffic volume study is carried out to ascertain the number of vehicles (A) Moving along straights (B) Turning left (C) Turning right (D) All the above

Description : At intersection of roads, the traffic volume study is carried out to ascertain the number of vehicles (A) Moving along straights (B) Turning left (C) Turning right (D) All the above

Last Answer : Answer: Option D

Shoulders for high traffic volume roads, should (A) Be stable throughout the year to be used by vehicles in the case of emergency (B) Support and protect the ends of carriage ways (C) Not allow entrance of water to sub-grade (D) All the above

Description : Shoulders for high traffic volume roads, should (A) Be stable throughout the year to be used by vehicles in the case of emergency (B) Support and protect the ends of carriage ways (C) Not allow entrance of water to sub-grade (D) All the above

Last Answer : Answer: Option D

The advantage of providing super-elevation on roads, is (A) Higher speed of vehicles (B) Increased volume of traffic (C) Reduced maintenance cost of the roads (D) All the above

Description : The advantage of providing super-elevation on roads, is (A) Higher speed of vehicles (B) Increased volume of traffic (C) Reduced maintenance cost of the roads (D) All the above

Last Answer : Answer: Option D

If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Description : If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Last Answer : Answer: Option C

As per recommendations of I.R.C., traffic volume study is carried out for rural roads for 7 days continuously during (A) Harvesting (B) Lean season (C) Harvesting and lean season (D) None of these

Description : As per recommendations of I.R.C., traffic volume study is carried out for rural roads for 7 days continuously during (A) Harvesting (B) Lean season (C) Harvesting and lean season (D) None of these

Last Answer : Answer: Option C

If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Description : If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Last Answer : Answer: Option C

Maximum number of vehicles that can pass a given point on a lane during one hour without creating unreasonable delay, is known as (A) Traffic density of lane (B) Basic capacity of lane (C) Probable capacity of lane (D) Practical capacity of lane

Description : Maximum number of vehicles that can pass a given point on a lane during one hour without creating unreasonable delay, is known as (A) Traffic density of lane (B) Basic capacity of lane (C) Probable capacity of lane (D) Practical capacity of lane

Last Answer : Answer: Option D

The number of vehicles moving in a specified direction on a roadway that pass a given point during specified unit of time, is called (A) Traffic volume (B) Traffic density (C) Basic capacity(D) Traffic capacity

Description : The number of vehicles moving in a specified direction on a roadway that pass a given point during specified unit of time, is called (A) Traffic volume (B) Traffic density (C) Basic capacity (D) Traffic capacity

Last Answer : Answer: Option A

On most smooth hard surfaced roads, rolling resistance to moving vehicles, ranges from (A) 5 kg to 7 kg/tonne (B) 7 kg to 9 kg/tonne (C) 9 kg to 11 kg/tonne (D) 11 kg to 13 kg/tonne

Description : On most smooth hard surfaced roads, rolling resistance to moving vehicles, ranges from (A) 5 kg to 7 kg/tonne (B) 7 kg to 9 kg/tonne (C) 9 kg to 11 kg/tonne (D) 11 kg to 13 kg/tonne

Last Answer : Answer: Option C

The knuckle joint is used to connect the... A. Two roads whose Axes are coincide or intersecting and lies in single plane. B. Two roads whose Axes are coincide or intersecting and lies in multiple plane. C. Two roads whose Axes are parallel or intersecting and lies in single plane. D. None of the above

Description : The knuckle joint is used to connect the... A. Two roads whose Axes are coincide or intersecting and lies in single plane. B. Two roads whose Axes are coincide or intersecting and lies in multiple ... Two roads whose Axes are parallel or intersecting and lies in single plane. D. None of the above

Last Answer : A. Two roads whose Axes are coincide or intersecting and lies in single plane.

Increase in traffic volume, due to increase in transport vehicles, is known as (A) Development traffic (B) Normal traffic growth (C) Generated traffic growth (D) Current traffic

Description : Increase in traffic volume, due to increase in transport vehicles, is known as (A) Development traffic (B) Normal traffic growth (C) Generated traffic growth (D) Current traffic

Last Answer : Answer: Option C

As per IRC recommendations, the average level of illumination on important roads carrying fast traffic is (A) 10 Lux (B) 15 Lux (C) 20 Lux (D) 30 Lux

Description : As per IRC recommendations, the average level of illumination on important roads carrying fast traffic is (A) 10 Lux (B) 15 Lux (C) 20 Lux (D) 30 Lux

Last Answer : Answer: Option D

If P is the number of vehicles per day at last census, r is the increase in traffic and n is the number of years passed after last census, number of vehicles A per day for design, is (A) P (1 + r)n (B) P (1 - r)n (C) P (1 + r)-n+5 (D) P (1 + r)5n

Description : If P is the number of vehicles per day at last census, r is the increase in traffic and n is the number of years passed after last census, number of vehicles A per day for design, is (A) P (1 + r)n (B) P (1 - r)n (C) P (1 + r)-n+5 (D) P (1 + r)5n

Last Answer : Answer: Option C

When a number of roads are meeting at a point and only one of the roads is important, then the suitable shape of rotary is (A) Circular (B) Tangent (C) Elliptical (D) Turbine

Description : When a number of roads are meeting at a point and only one of the roads is important, then the suitable shape of rotary is (A) Circular (B) Tangent (C) Elliptical (D) Turbine

Last Answer : Answer: Option B

The weaving length of a roadway is the distance (A) Between the channelizing islands (B) Equal to half circumference (C) Equal to total width of adjoining radial roads (D) Equal to diameter of rotary

Description : The weaving length of a roadway is the distance (A) Between the channelizing islands (B) Equal to half circumference (C) Equal to total width of adjoining radial roads (D) Equal to diameter of rotary

Last Answer : Answer: Option A

Roundabouts are not suitable if number of vehicles exceed (A) 3000 (B) 4000 (C) 5000 (D) 6000

Description : Roundabouts are not suitable if number of vehicles exceed (A) 3000 (B) 4000 (C) 5000 (D) 6000

Last Answer : Answer: Option A

The monthly incomes of two persons are in the ratio 5 : 4 and their monthly expenditures are in the ratio 9 : 7. If each person saves Rs. 500 per month, then what are their monthly incomes? a) Rs 8000 and Rs 10000 b) Rs 3750 and Rs 3000 c) Rs 5000 and Rs 4000 d) Rs 4500 and Rs 4000 e) None of the above

Description : The monthly incomes of two persons are in the ratio 5 : 4 and their monthly expenditures are in the ratio 9 : 7. If each person saves Rs. 500 per month, then what are their monthly incomes? a) Rs 8000 and Rs ... Rs 3750 and Rs 3000 c) Rs 5000 and Rs 4000 d) Rs 4500 and Rs 4000 e) None of the above

Last Answer : Let the incomes of two persons be 5x and 4x let the expenditures of them be 9y and 7y Each person saves Rs. 500 Therefore, 5x - 9y = 500 4x - 7y = 500 Solving the above equations, 20x - 36y = 2000 20x - ... = 500 + 9(500) = 5000 X = 1000 Hence, their salaries are Rs. 5000 and Rs. 4000 Answer: c)

If A is the projected area of a vehicle in square metres, V is speed of the vehicles in kilometres per hour and C is a constant, then the wind resistance R to the moving vehicles, is given by (A) R = CAV (B) R = CAV2 (C) R = CAV3 (D) R = C 2AV

Description : If A is the projected area of a vehicle in square metres, V is speed of the vehicles in kilometres per hour and C is a constant, then the wind resistance R to the moving vehicles, is given by (A) R = CAV (B) R = CAV2 (C) R = CAV3 (D) R = C 2AV

Last Answer : Answer: Option B

If present A.D.T. is 5000 vehicles and annual increase is 10%, the average future flow after 5 years will be (A) 6050 vehicles (B) 7050 vehicles (C) 8050 vehicles (D) 9050 vehicles

Description : If present A.D.T. is 5000 vehicles and annual increase is 10%, the average future flow after 5 years will be (A) 6050 vehicles (B) 7050 vehicles (C) 8050 vehicles (D) 9050 vehicles

Last Answer : Answer: Option C

As per masonry code, the stiffening coefficient for walls stiffened by piers, buttresses or intersecting walls can be (a) 0 to 1.0 (b) 1.0 to 2.0 (c ) Greater than 2.0 (d) Invariantly 1.0

Description : As per masonry code, the stiffening coefficient for walls stiffened by piers, buttresses or intersecting walls can be (a) 0 to 1.0 (b) 1.0 to 2.0 (c ) Greater than 2.0 (d) Invariantly 1.0

Last Answer : (b) 1.0 to 2.0

Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Description : Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Last Answer : Answer: Option B

For the movement of vehicles at an intersection of two roads, without any interference, the type of grade separator generally preferred to, is (A) Delta (B) Trumpet (C) Diamond interchange (D) Clover leaf

Description : For the movement of vehicles at an intersection of two roads, without any interference, the type of grade separator generally preferred to, is (A) Delta (B) Trumpet (C) Diamond interchange (D) Clover leaf

Last Answer : Answer: Option D

Driving vehicles on wet surfaced roads, is dangerous because it may (A) Skid (B) Slip (C) Overturn (D) All the above

Description : Driving vehicles on wet surfaced roads, is dangerous because it may (A) Skid (B) Slip (C) Overturn (D) All the above

Last Answer : Answer: Option B

To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Description : To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Last Answer : Answer: Option D

Ceramic recuperators compared to metallic recuperators for the same duty (A) Are lighter (B) Occupy more space (C) Are less costly (D) Have higher pressure differential between flue gas & air side

Description : Ceramic recuperators compared to metallic recuperators for the same duty (A) Are lighter (B) Occupy more space (C) Are less costly (D) Have higher pressure differential between flue gas & air side

Last Answer : (B) Occupy more space

Regenerators compared to the recuperators for the same duty (A) Occupy more space (B) Are less costly (C) Are of smaller size (D) All (A), (B) and (C)

Description : Regenerators compared to the recuperators for the same duty (A) Occupy more space (B) Are less costly (C) Are of smaller size (D) All (A), (B) and (C)

Last Answer : (A) Occupy more space

Concrete pavement is provided if daily traffic per lane exceeds (A) 500 tonnes (B) 750 tonnes (C) 1000 tonnes (D) 1250 tonnes

Description : Concrete pavement is provided if daily traffic per lane exceeds (A) 500 tonnes (B) 750 tonnes (C) 1000 tonnes (D) 1250 tonnes

Last Answer : Answer: Option C

Maximum daily traffic capacity of bituminous pavements is (A) 500 tonnes per day (B) 1000 tonnes per day (C) 1500 tonnes per day (D) 2000 tonnes per day

Description : Maximum daily traffic capacity of bituminous pavements is (A) 500 tonnes per day (B) 1000 tonnes per day (C) 1500 tonnes per day (D) 2000 tonnes per day

Last Answer : Answer: Option C

For Indian conditions, the water bound macadam roads, are suitable if daily traffic does not exceed (A) 2000 tonnes (B) 2500 tonnes (C) 3000 tonnes (D) 3500 tonnes

Description : For Indian conditions, the water bound macadam roads, are suitable if daily traffic does not exceed (A) 2000 tonnes (B) 2500 tonnes (C) 3000 tonnes (D) 3500 tonnes

Last Answer : Answer: Option A

For a small scale toy factory, the fixed cost per month is Rs. 5000/-. The variable cost per toy is Rs. 20 and sales price is Rs. 30 per toy. The break even production per month will be __________ toys. (A) 250 (B) 500 (C) 1000 (D) 3000

Description : For a small scale toy factory, the fixed cost per month is Rs. 5000/-. The variable cost per toy is Rs. 20 and sales price is Rs. 30 per toy. The break even production per month will be __________ toys. (A) 250 (B) 500 (C) 1000 (D) 3000

Last Answer : (B) 500

The traffic carrying capacity of a single lane, depends on (A) Type of the vehicles (B) Level crossings (C) Road intersections (D) All the above

Description : The traffic carrying capacity of a single lane, depends on (A) Type of the vehicles (B) Level crossings (C) Road intersections (D) All the above

Last Answer : Answer: Option D

One-way streets are generally provided in crowded cities as, these (A) Are inexpensive means of traffic flow (B) Reduce delays to vehicles (C) Permit higher speed (D) All the above

Description : One-way streets are generally provided in crowded cities as, these (A) Are inexpensive means of traffic flow (B) Reduce delays to vehicles (C) Permit higher speed (D) All the above

Last Answer : Answer: Option D

In your opinion as vehicles get easier, and easier to operate do you think people become less aware of actual driving, and whats going on around them in traffic?

Description : In your opinion as vehicles get easier, and easier to operate do you think people become less aware of actual driving, and whats going on around them in traffic?

Last Answer : Haven’t you asked this question before?

To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length of the pipe is 1506 m and f = 0.01, ignoring other minor losses and assuming the economical diameter from Lea's formula D = 1.2 Q, the water horse power of the pump is (A) 400 (B) 450 (C) 500(D) 600

Description : To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is  installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length  of the ... the water horse power of the pump is  (A) 400  (B) 450  (C) 500 (D) 600

Last Answer : (D) 600

A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs involved are Rs. 20 per man-hour and Rs. 500 per machine-hour. The total quantity of excavation is estimated to be 4,000 cum. The optimal quantity of excavation to be done manually for minimum total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Description : A contractor wishes to determine a suitable combination of manual labour and machine work for the excavation of a multistory construction. For every cum of excavation, 3 man-hours are needed; or 0.2 machine-hour. Costs ... total cost will be (a) 1500 cum (b) 1800 cum (c) 2250 cum (d) 2500 cum

Last Answer : (d) 2500 cum

If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C) (B) N = (L + C) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Description : If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C ... ) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Last Answer : Answer: Option A

A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed can be processed every hour (C) It takes three hours to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Description : A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed ... to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Last Answer : (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours

Granite is not suitable for ordinary building purpose because (A) It cannot be polished (B) It is not a fire proof material (C) It is costly (D) It has less crushing strength

Description : Granite is not suitable for ordinary building purpose because (A) It cannot be polished (B) It is not a fire proof material (C) It is costly (D) It has less crushing strength

Last Answer : Answer: Option C

During a period 17, 500 labour hours were worked at a standard cost of Rs 6.50 per hour. The labour efficiency variance was Rs 7,800 favourable. How many standard hours were produced? (a) 1,200 (b) 16,300 (c) 17,500 (d) 18,700

Description : During a period 17, 500 labour hours were worked at a standard cost of Rs 6.50 per hour. The  labour efficiency variance was Rs 7,800 favourable. How many standard hours were produced? (a) 1,200 (b) 16,300 (c) 17,500 (d) 18,700

Last Answer : (d) 18,700

Mr. Grumper grumbles about bad time-keeping trains like everybody else. On one particular morning he was justified, though. The train left on time for the one hour journey and it arrived 5 minutes late. However, Mr. Grumper's watch showed it to be 3 minutes early, so he adjusted his watch by putting it forward 3 minutes. His watch kept time during the day, and on the return journey in the evening the train started on time, according to his watch, and arrived on time, according to the station clock. If the train traveled 25 percent faster on the return journey than it did on the morning journey, was the station clock fast or slow, and by how much? -Riddles

Description : Mr. Grumper grumbles about bad time-keeping trains like everybody else. On one particular morning he was justified, though. The train left on time for the one hour journey and it arrived 5 minutes late. ... did on the morning journey, was the station clock fast or slow, and by how much? -Riddles

Last Answer : The station clock is 3 minutes fast. The morning journey took 65 minutes, and the evening journey therefore took 52 minutes, and the train arrived 57 minutes after it should have left, that is, 3 minutes early.

An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 cm/hr, the maximum run-off rate based on 10 minute peak percentage of 16% from distributing graph of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Description : An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 ... of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Last Answer : Answer: Option C

Did You See Driverless Vehicles on Mountainous Roads in Northern California in the 1950s?

Description : Did You See Driverless Vehicles on Mountainous Roads in Northern California in the 1950s?

Last Answer : What?

Do you see a day where autonomous vehicles will be the only vehicles on the roads?

Description : Do you see a day where autonomous vehicles will be the only vehicles on the roads?

Last Answer : Some claim that it will eliminate the need for transport drivers, wishful thinking but I have been in the industry way to long to see that happening , one example would be say a ... babysit this wonderful technology,and protect the load in cases of breakdowns.(and there will be breakdowns)

The total value of extra widening required at a horizontal curve on a two lane hill road of radius 42 m for a design speed of 50 kmph and for vehicles with wheel base 6 m, is (A) 0.500 m (B) 0.589 m (C) 1.089 m (D) 0.089 m

Description : The total value of extra widening required at a horizontal curve on a two lane hill road of radius 42 m for a design speed of 50 kmph and for vehicles with wheel base 6 m, is (A) 0.500 m (B) 0.589 m (C) 1.089 m (D) 0.089 m

Last Answer : Answer: Option C

Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is (A) 80 m (B) 100 m (C) 120 m (D) 150 m

Description : Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is (A) 80 m (B) 100 m (C) 120 m (D) 150 m

Last Answer : Answer: Option C

If V is the design speed of vehicles in km/hour, the change of radial acceleration in metres/sec3 , is (A) 65/(70 + V) (B) 60/(70 + V) (C) 70/(65 + V) (D) 70/(60 + V)

Description : If V is the design speed of vehicles in km/hour, the change of radial acceleration in metres/sec3 , is (A) 65/(70 + V) (B) 60/(70 + V) (C) 70/(65 + V) (D) 70/(60 + V)

Last Answer : Answer: Option C

If brakes of vehicles are effective, the vehicle-running at 30 km/hour comes to a stop in (A) 10 metres (B) 12 metres (C) 15 metres (D) 18 metres

Description : If brakes of vehicles are effective, the vehicle-running at 30 km/hour comes to a stop in (A) 10 metres (B) 12 metres (C) 15 metres (D) 18 metres

Last Answer : Answer: Option B

If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Description : If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Last Answer : Answer: Option C

The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Last Answer : they contain clock recovery circuits