One-way streets are generally provided in crowded cities as, these (A) Are inexpensive means of traffic flow (B) Reduce delays to vehicles (C) Permit higher speed (D) All the above

One-way streets are generally provided in crowded cities as, these
(A) Are inexpensive means of traffic flow
(B) Reduce delays to vehicles
(C) Permit higher speed
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

When should drivers try to avoid using residential streets as shortcuts when traffic is causing delays?

Description : When should drivers try to avoid using residential streets as shortcuts when traffic is causing delays?

Last Answer : People like to minimize traffic on their residential streets because it makes it safer for their children, and quieter for their enjoyment of their property.

Light houses are places with powerful lights to : (1) guide and resolve traffic jams in crowded metro-cities during nights. (2) guide and help large crowds at religious gathering during nights. (3) indicate to the incoming warships, the location of a harbour during night. (4) guide and warn the ships coming from different directions in the ocean.

Description : Light houses are places with powerful lights to : (1) guide and resolve traffic jams in crowded metro-cities during nights. (2) guide and help large crowds at religious gathering during nights. (3) ... harbour during night. (4) guide and warn the ships coming from different directions in the ocean.

Last Answer : guide and warn the ships coming from different directions in the ocean.

The advantage of providing super-elevation on roads, is (A) Higher speed of vehicles (B) Increased volume of traffic (C) Reduced maintenance cost of the roads (D) All the above

Description : The advantage of providing super-elevation on roads, is (A) Higher speed of vehicles (B) Increased volume of traffic (C) Reduced maintenance cost of the roads (D) All the above

Last Answer : Answer: Option D

Light houses are places with powerful lights to : (1) guide and resolve traffic jams in crowded metrocities during nights. (2) guide and help large crowds at religious gathering during nights. (3) indicate to the incoming warships, the location of a harbour during night. (4) guide and warn the ships coming from different directions in the ocean.

Description : Light houses are places with powerful lights to : (1) guide and resolve traffic jams in crowded metrocities during nights. (2) guide and help large crowds at religious gathering during nights. (3) ... harbour during night. (4) guide and warn the ships coming from different directions in the ocean.

Last Answer : (4) guide and warn the ships coming from different directions in the ocean. Explanation: A lighthouse is a tower, building, or other type of structure designed to emit light from a system of ... coastlines, hazardous shoals, reefs, safe entries to harbors, and can also assist in aerial navigation.

If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Description : If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Last Answer : Answer: Option C

The rotor slots of a repulsion-type motor are generally skewed (placed nonparallel to the rotor axis) to _________. A. produce a constant starting torque B. permit a greater air gap with the starter C. permit a smaller air gap with the starter D. reduce eddy current losses

Description : The rotor slots of a repulsion-type motor are generally skewed (placed nonparallel to the rotor axis) to _________. A. produce a constant starting torque B. permit a greater air gap with the starter C. permit a smaller air gap with the starter D. reduce eddy current losses

Last Answer : Answer: A

During New Year's eve, in the big cities, do they usually have a party on the streets?

Description : During New Year's eve, in the big cities, do they usually have a party on the streets?

Last Answer : New Years Day is a holiday, and for most occupations, there is no work that day. The New Year's street celebration that is most famous is Times Square in New York City. That is televised ... have their own outdoor gatherings, but most Americans celebrate New Years at home or at a private party.

Where can you find cities, towns, shops, and streets but no people?” -Riddles

Description : Where can you find cities, towns, shops, and streets but no people?” -Riddles

Last Answer : map is the answer

Where can you find cities, towns, shops, and streets but no people? -Riddles

Description : Where can you find cities, towns, shops, and streets but no people? -Riddles

Last Answer : In a map we can find cities, towns, shops, and streets but no people.

Streets of most Harappan cities were narrow to _______.?

Description : Streets of most Harappan cities were narrow to _______.?

Last Answer : protect against the windA+

How were the streets of cities in Indus Valley civilization?

Description : How were the streets of cities in Indus Valley civilization?

Last Answer : Wide and straight

How slow does traffic need to be going on the highway in order to justify taking surface streets?

Description : How slow does traffic need to be going on the highway in order to justify taking surface streets?

Last Answer : answer:I'd say take the streets for a week. Each day record the time it takes you to take the streets. Find the average. From there, figure out how far you're actually going on the streets ... = Distance highway /Speed highway Take the streets when : Time streets < Time highway So: Time streets

Which of the following is/are true concerning electric power operated watertight door systems? A. Each motor driven door must use the main bus as its source of power. B. Each distribution panel for the system must be on the lowest level where berthing quarters are located. C. Distribution panels must not be provided with a means of locking in order to permit quick activation of the system. D. Each system must have a separate branch circuit.

Description : Which of the following is/are true concerning electric power operated watertight door systems? A. Each motor driven door must use the main bus as its source of power. B. Each distribution panel for ... to permit quick activation of the system. D. Each system must have a separate branch circuit.

Last Answer : Answer: D

If P is the number of vehicles per day at last census, r is the increase in traffic and n is the number of years passed after last census, number of vehicles A per day for design, is (A) P (1 + r)n (B) P (1 - r)n (C) P (1 + r)-n+5 (D) P (1 + r)5n

Description : If P is the number of vehicles per day at last census, r is the increase in traffic and n is the number of years passed after last census, number of vehicles A per day for design, is (A) P (1 + r)n (B) P (1 - r)n (C) P (1 + r)-n+5 (D) P (1 + r)5n

Last Answer : Answer: Option C

Shoulders for high traffic volume roads, should (A) Be stable throughout the year to be used by vehicles in the case of emergency (B) Support and protect the ends of carriage ways (C) Not allow entrance of water to sub-grade (D) All the above

Description : Shoulders for high traffic volume roads, should (A) Be stable throughout the year to be used by vehicles in the case of emergency (B) Support and protect the ends of carriage ways (C) Not allow entrance of water to sub-grade (D) All the above

Last Answer : Answer: Option D

The traffic carrying capacity of a single lane, depends on (A) Type of the vehicles (B) Level crossings (C) Road intersections (D) All the above

Description : The traffic carrying capacity of a single lane, depends on (A) Type of the vehicles (B) Level crossings (C) Road intersections (D) All the above

Last Answer : Answer: Option D

Increase in traffic volume, due to increase in transport vehicles, is known as (A) Development traffic (B) Normal traffic growth (C) Generated traffic growth (D) Current traffic

Description : Increase in traffic volume, due to increase in transport vehicles, is known as (A) Development traffic (B) Normal traffic growth (C) Generated traffic growth (D) Current traffic

Last Answer : Answer: Option C

The number of vehicles moving in a specified direction on a roadway that pass a given point during specified unit of time, is called (A) Traffic volume (B) Traffic density (C) Basic capacity(D) Traffic capacity

Description : The number of vehicles moving in a specified direction on a roadway that pass a given point during specified unit of time, is called (A) Traffic volume (B) Traffic density (C) Basic capacity (D) Traffic capacity

Last Answer : Answer: Option A

At intersection of roads, the traffic volume study is carried out to ascertain the number of vehicles (A) Moving along straights (B) Turning left (C) Turning right (D) All the above

Description : At intersection of roads, the traffic volume study is carried out to ascertain the number of vehicles (A) Moving along straights (B) Turning left (C) Turning right (D) All the above

Last Answer : Answer: Option D

A traffic rotary is justified where (A) Number of intersecting roads is between 4 and 7 (B) Space is limited and costly (C) When traffic volume is less than 500 vehicles per hour (D) When traffic volume is more than 5000 vehicles per hour

Description : A traffic rotary is justified where (A) Number of intersecting roads is between 4 and 7 (B) Space is limited and costly (C) When traffic volume is less than 500 vehicles per hour (D) When traffic volume is more than 5000 vehicles per hour

Last Answer : Answer: Option A

Maximum number of vehicles that can pass a given point on a lane during one hour without creating unreasonable delay, is known as (A) Traffic density of lane (B) Basic capacity of lane (C) Probable capacity of lane (D) Practical capacity of lane

Description : Maximum number of vehicles that can pass a given point on a lane during one hour without creating unreasonable delay, is known as (A) Traffic density of lane (B) Basic capacity of lane (C) Probable capacity of lane (D) Practical capacity of lane

Last Answer : Answer: Option D

The drop man holes are generally provided in sewers for A. Industrial areas B. Large town ships C. Hilly town ships D. Cities in plains

Description : The drop man holes are generally provided in sewers for A. Industrial areas B. Large town ships C. Hilly town ships D. Cities in plains

Last Answer : ANS: C

Pick up the correct statement from the following regarding radial flow centrifugal pumps: (A) These are provided with volute type or turbine type casings (B) In involute type of radial flow centrifugal pump, the impeller discharges into a gradually expanding spiral casing (C) The efficiency of turbine type of radial flow centrifugal pump, is always higher than that of volute type (D) All the above

Description : Pick up the correct statement from the following regarding radial flow centrifugal pumps:  (A) These are provided with volute type or turbine type casings  (B) In involute type of radial flow ... centrifugal pump, is always higher than that of  volute type  (D) All the above 

Last Answer : (D) All the above 

To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Description : To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Last Answer : Answer: Option D

Chain surveying is well adopted for (A) Small areas in open ground (B) Small areas with crowded details (C) Large areas with simple details (D) Large areas with difficult details

Description : Chain surveying is well adopted for (A) Small areas in open ground (B) Small areas with crowded details (C) Large areas with simple details (D) Large areas with difficult details

Last Answer : (A) Small areas in open ground

Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration permanently. 4. Have nearly uniform discharge. Which of these statements are corrects? (a) 1, 2 & 4 only (b) 1, 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Description : Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration ... 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Last Answer : (d) 1, 2, 3 & 4

Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at high speed. C. To permit the generation to deliver current to the battery or to the lightening and ignition circuit. D. None of the above

Description : Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at ... deliver current to the battery or to the lightening and ignition circuit. D. None of the above

Last Answer : A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces.

For the movement of vehicles at an intersection of two roads, without any interference, the type of grade separator generally preferred to, is (A) Delta (B) Trumpet (C) Diamond interchange (D) Clover leaf

Description : For the movement of vehicles at an intersection of two roads, without any interference, the type of grade separator generally preferred to, is (A) Delta (B) Trumpet (C) Diamond interchange (D) Clover leaf

Last Answer : Answer: Option D

Critical path method (A) Is an improvement upon bar chart method (B) Provides a realistic approach to daily problems (C) Avoids delays which are very common in bar charts (D) All the above

Description : Critical path method (A) Is an improvement upon bar chart method (B) Provides a realistic approach to daily problems (C) Avoids delays which are very common in bar charts (D) All the above

Last Answer : (D) All the above

Concrete pavement is provided if daily traffic per lane exceeds (A) 500 tonnes (B) 750 tonnes (C) 1000 tonnes (D) 1250 tonnes

Description : Concrete pavement is provided if daily traffic per lane exceeds (A) 500 tonnes (B) 750 tonnes (C) 1000 tonnes (D) 1250 tonnes

Last Answer : Answer: Option C

Infrastructure wise, which city/cities are the best for electric vehicles?

Description : Infrastructure wise, which city/cities are the best for electric vehicles?

Last Answer : Need Answer.

Which cities has the largest number of registered vehicles

Description : Which cities has the largest number of registered vehicles

Last Answer : Delhi

Are emergency vehicles ever able to influence traffic stop lights?

Description : Are emergency vehicles ever able to influence traffic stop lights?

Last Answer : Yes. It is called traffic signal preemption. There is a little doodad on top of the lights that can be triggered by approaching emergency vehicles.

In your opinion as vehicles get easier, and easier to operate do you think people become less aware of actual driving, and whats going on around them in traffic?

Description : In your opinion as vehicles get easier, and easier to operate do you think people become less aware of actual driving, and whats going on around them in traffic?

Last Answer : Haven’t you asked this question before?

Traffic question. Yielding to emergency vehicles. See inside.

Description : Traffic question. Yielding to emergency vehicles. See inside.

Last Answer : answer:I'd try really hard to get out of the vehicle's way. I'd go to the right if I'm on the right side of the road, to the left if I'm on the left side-no way me cutting through ... down the stretch and I dunno what happened after that. It was insane to witness, and I wish I was exaggerating.

When a driver stops at an intersection because traffic is backed up, German law requires the driver to leave enough space for vehicles on the intersecting street to clear the intersection.?

Description : When a driver stops at an intersection because traffic is backed up, German law requires the driver to leave enough space for vehicles on the intersecting street to clear the intersection.?

Last Answer : This isn't really a question. Just a statement. It makes sense to not block the intersection when there's traffic. I hate when people do that.

If present A.D.T. is 5000 vehicles and annual increase is 10%, the average future flow after 5 years will be (A) 6050 vehicles (B) 7050 vehicles (C) 8050 vehicles (D) 9050 vehicles

Description : If present A.D.T. is 5000 vehicles and annual increase is 10%, the average future flow after 5 years will be (A) 6050 vehicles (B) 7050 vehicles (C) 8050 vehicles (D) 9050 vehicles

Last Answer : Answer: Option C

Baffles in mixing tanks are provided to (A) Reduce swirling and vortex formation (B) Increase the structural strength of the tank (C) Aid in rotational flow (D) None of these

Description : Baffles in mixing tanks are provided to (A) Reduce swirling and vortex formation (B) Increase the structural strength of the tank (C) Aid in rotational flow (D) None of these

Last Answer : (A) Reduce swirling and vortex formation

Peptizers like aromatic mercaptans (e.g. thiophenes) are added in rubber to (A) Protect rubber goods from attack by oxygen & ozone present in the atmosphere (B) Reduce its viscosity to permit easier processing (C) Reduce the time of vulcanisation and quantity of vulcanising agent (D) Increase its viscosity

Description : Peptizers like aromatic mercaptans (e.g. thiophenes) are added in rubber to (A) Protect rubber goods from attack by oxygen & ozone present in the atmosphere (B) Reduce its viscosity to ... processing (C) Reduce the time of vulcanisation and quantity of vulcanising agent (D) Increase its viscosity

Last Answer : (B) Reduce its viscosity to permit easier processing

If a firm, or a network firm, has a direct financial interest in an audit client of the firm, the self-interest threat created would be so significant no safeguard could reduce the threat to an acceptable level. The action appropriate to permit the firm to perform the engagement would be to a. Dispose of the financial interest. b. Dispose of a sufficient amount of it so that the remaining interest is no longer material. c. Either a or b d. Neither a nor b

Description : If a firm, or a network firm, has a direct financial interest in an audit client of the firm, the self-interest threat created would be so significant no safeguard could reduce the threat to an acceptable ... that the remaining interest is no longer material. c. Either a or b d. Neither a nor b

Last Answer : Dispose of the financial interest

How bit microprocessor inexpensive a separate interface is provided with I/O device: a. 2 bit b. 4 bit c. 8 bit d. 32 bit

Description : How bit microprocessor inexpensive a separate interface is provided with I/O device: a. 2 bit b. 4 bit c. 8 bit d. 32 bit

Last Answer : c. 8 bit

Pick up the incorrect statement from the following: A. Septic tanks are horizontal continuous flow type of sedimentation tanks B. Septic tanks are generally provided a detention period of 12 to 36 hours C. Septic tanks are completely covered and high vent shafts are provided for the escape of foul gases D. None of these

Description : Pick up the incorrect statement from the following: A. Septic tanks are horizontal continuous flow type of sedimentation tanks B. Septic tanks are generally provided a detention period of 12 to 36 hours C ... covered and high vent shafts are provided for the escape of foul gases D. None of these

Last Answer : ANS: D

Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is (A) 80 m (B) 100 m (C) 120 m (D) 150 m

Description : Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is (A) 80 m (B) 100 m (C) 120 m (D) 150 m

Last Answer : Answer: Option C

If V is the design speed of vehicles in km/hour, the change of radial acceleration in metres/sec3 , is (A) 65/(70 + V) (B) 60/(70 + V) (C) 70/(65 + V) (D) 70/(60 + V)

Description : If V is the design speed of vehicles in km/hour, the change of radial acceleration in metres/sec3 , is (A) 65/(70 + V) (B) 60/(70 + V) (C) 70/(65 + V) (D) 70/(60 + V)

Last Answer : Answer: Option C

If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C) (B) N = (L + C) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Description : If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C ... ) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Last Answer : Answer: Option A

If A is the projected area of a vehicle in square metres, V is speed of the vehicles in kilometres per hour and C is a constant, then the wind resistance R to the moving vehicles, is given by (A) R = CAV (B) R = CAV2 (C) R = CAV3 (D) R = C 2AV

Description : If A is the projected area of a vehicle in square metres, V is speed of the vehicles in kilometres per hour and C is a constant, then the wind resistance R to the moving vehicles, is given by (A) R = CAV (B) R = CAV2 (C) R = CAV3 (D) R = C 2AV

Last Answer : Answer: Option B

The total value of extra widening required at a horizontal curve on a two lane hill road of radius 42 m for a design speed of 50 kmph and for vehicles with wheel base 6 m, is (A) 0.500 m (B) 0.589 m (C) 1.089 m (D) 0.089 m

Description : The total value of extra widening required at a horizontal curve on a two lane hill road of radius 42 m for a design speed of 50 kmph and for vehicles with wheel base 6 m, is (A) 0.500 m (B) 0.589 m (C) 1.089 m (D) 0.089 m

Last Answer : Answer: Option C

Design of horizontal curves on highways, is based on (A) Design speed of vehicles (B) Permissible friction on the road surface (C) Permissible centrifugal ratio (D) All the above

Description : Design of horizontal curves on highways, is based on (A) Design speed of vehicles (B) Permissible friction on the road surface (C) Permissible centrifugal ratio (D) All the above

Last Answer : Answer: Option D