Set-back distance is the distance between (A) Road land boundary and building line (B) Road land boundary and control line (C) Building line and control line (D) Road land boundary and control line

Set-back distance is the distance between
(A) Road land boundary and building line
(B) Road land boundary and control line
(C) Building line and control line
(D) Road land boundary and control line
by

1 Answer

Answer :

Answer: Option A
by

Related questions

Speed breaker has to be provided on road approaches of level crossing at maximum feasible distance within Railway boundary but not exceeding a) 10 meters b) 15 meters c) 20 meters* d) 200 meters

Description : Speed breaker has to be provided on road approaches of level crossing at maximum feasible distance within Railway boundary but not exceeding a) 10 meters b) 15 meters c) 20 meters* d) 200 meters

Last Answer : c) 20 meters*

Reference pillars fixed on the centre line of a proposed road, provide the following information: (A) Reduced distance (R.D.) (B) Horizontal distance of road from the centre line (C) Reduced level at the top of pillar (D) All the above

Description : Reference pillars fixed on the centre line of a proposed road, provide the following information: (A) Reduced distance (R.D.) (B) Horizontal distance of road from the centre line (C) Reduced level at the top of pillar (D) All the above

Last Answer : Answer: Option D

The….. is an attribute of the < table > tag to set the distance between the cell content and its boundary. -Technology

Description : The….. is an attribute of the < table > tag to set the distance between the cell content and its boundary. -Technology

Last Answer : Thecellpaddingis an attribute of the < table > tag to set the distance between the cell content and its boundary.

Among the greatest achievements of Chandragupta the building of trunk road from Taxila to Pataliputra was very important. The distance of that road is: A. 1,280 km B. 1,281 km C. 1,282 km D. 1,283 km

Description : Among the greatest achievements of Chandragupta the building of trunk road from Taxila to Pataliputra was very important. The distance of that road is: A. 1,280 km B. 1,281 km C. 1,282 km D. 1,283 km

Last Answer : ANSWER: A

The thickness of a laminar boundary layer over a flat plate at two different sections P and Q are 0.8 cm and 2.4 cm respectively. If the section Q is 3.6 m downstream of P, the distance of section P from the leading edge of the plate is (a) 0.32 m (b) 0.22 m (c) 0.40 m (d) 0.53 m

Description : The thickness of a laminar boundary layer over a flat plate at two different sections P and Q are 0.8 cm and 2.4 cm respectively. If the section Q is 3.6 m downstream of P, the distance of section P from the leading edge of the plate is (a) 0.32 m (b) 0.22 m (c) 0.40 m (d) 0.53 m

Last Answer : Ans: (c) Correct Answer is: 0.45 m

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

The inventor of road making as a building science, was (A) Sully (B) Tresguet (C) Telford (D) Macadam

Description : The inventor of road making as a building science, was (A) Sully (B) Tresguet (C) Telford (D) Macadam

Last Answer : Answer: Option A

Following type of pavement is generally known as flexible pavement (A) Water-bound macadam roads (B) Stabilised soil roads (C) Road constructed with various layers of building material well compacted (D) All the above

Description : Following type of pavement is generally known as flexible pavement (A) Water-bound macadam roads (B) Stabilised soil roads (C) Road constructed with various layers of building material well compacted (D) All the above

Last Answer : Answer: Option D

The aggregate impact value of the aggregate used in (A) Building concrete is less than 45 (B) Road pavement concrete is less than 30 (C) Runway concrete is less than 30 (D) All the above

Description : The aggregate impact value of the aggregate used in (A) Building concrete is less than 45 (B) Road pavement concrete is less than 30 (C) Runway concrete is less than 30 (D) All the above

Last Answer : Answer: Option D

An Electromagnetic wave falls on to a boundary between two losses less homogeneous media with different refractive indices, a part of the wave is reflected back to the incident medium and the rest is transmitted on to the second media". This phenomenon is known as: (A) Fresnel reflection (B) Fresnel refraction (C) Snell's law (D) None of these

Description : An Electromagnetic wave falls on to a boundary between two losses less homogeneous media with different refractive indices, a part of the wave is reflected back to the incident medium and the rest is transmitted ... A) Fresnel reflection (B) Fresnel refraction (C) Snell's law (D) None of these

Last Answer : Answer: Option A

The boundary of water of a still lake represents (A) Level surface (B) Horizontal surface (C) Contour line (D) A concave surface

Description : The boundary of water of a still lake represents (A) Level surface (B) Horizontal surface (C) Contour line (D) A concave surface

Last Answer : (C) Contour line

If there is no impervious boundary at the bottom of a hydraulic structure, stream lines tend to follow: (A) A straight line (B) A parabola (C) A semi-ellipse (D) A semi-circle

Description : If there is no impervious boundary at the bottom of a hydraulic structure, stream lines tend to follow: (A) A straight line (B) A parabola (C) A semi-ellipse (D) A semi-circle

Last Answer : (C) A semi-ellipse

Pick up the correct definition from the following with response to GIS. (A) Common boundary between two areas of a locality is known as adjacency (B) The area features which are wholly contained within another area feature, is known so containment (C) The geometric property which describes the linkage between line features is defined as connectivity (D) All of these

Description : Pick up the correct definition from the following with response to GIS. (A) Common boundary between two areas of a locality is known as adjacency (B) The area features which are wholly ... property which describes the linkage between line features is defined as connectivity (D) All of these

Last Answer : Answer: Option D

_______ was demarcated after the Shimla pact in 1972 A. Kashmir Line B. Line of Control C. Front Line Boundary D. Durand Line

Description : _______ was demarcated after the Shimla pact in 1972 A. Kashmir Line B. Line of Control C. Front Line Boundary D. Durand Line

Last Answer : ANSWER: B

What is the name of boundary between the Pakistani Azad Kashmir and Indian occupied Jammu and Kashmir? A. Line of control B. Line of Fire C. Front Line Boundary D. Durand Line

Description : What is the name of boundary between the Pakistani Azad Kashmir and Indian occupied Jammu and Kashmir? A. Line of control B. Line of Fire C. Front Line Boundary D. Durand Line

Last Answer : ANSWER: A

_______ was demarcated after the Shimla pact in 1972 A. Kashmir Line B. Line of Control C. Front Line Boundary D. Durand Line

Description : _______ was demarcated after the Shimla pact in 1972 A. Kashmir Line B. Line of Control C. Front Line Boundary D. Durand Line

Last Answer : ANSWER: B

What is the name of boundary between the Pakistani Azad Kashmir and Indian occupied Jammu and Kashmir? A. Line of control B. Line of Fire C. Front Line Boundary D. Durand Line

Description : What is the name of boundary between the Pakistani Azad Kashmir and Indian occupied Jammu and Kashmir? A. Line of control B. Line of Fire C. Front Line Boundary D. Durand Line

Last Answer : ANSWER: A

_______ was demarcated after the Shimla pact in 1972 A. Kashmir Line B. Line of Control C. Front Line Boundary D. Durand Line

Description : _______ was demarcated after the Shimla pact in 1972 A. Kashmir Line B. Line of Control C. Front Line Boundary D. Durand Line

Last Answer : ANSWER: B

What is the name of boundary between the Pakistani Azad Kashmir and Indian occupied Jammu and Kashmir? A. Line of control B. Line of Fire C. Front Line Boundary D. Durand Line

Description : What is the name of boundary between the Pakistani Azad Kashmir and Indian occupied Jammu and Kashmir? A. Line of control B. Line of Fire C. Front Line Boundary D. Durand Line

Last Answer : ANSWER: A

_______ was demarcated after the Shimla pact in 1972 A. Kashmir Line B. Line of Control C. Front Line Boundary D. Durand Line

Description : _______ was demarcated after the Shimla pact in 1972 A. Kashmir Line B. Line of Control C. Front Line Boundary D. Durand Line

Last Answer : ANSWER: B

The normal road land width for a major district road in open area, is (A) 45 m (B) 25 m (C) 15 m (D) 12 m

Description : The normal road land width for a major district road in open area, is (A) 45 m (B) 25 m (C) 15 m (D) 12 m

Last Answer : Answer: Option B

The normal road land width for a National or State highway, in open areas should be (A) 45 m (B) 30 m (C) 24 m (D) 20 m

Description : The normal road land width for a National or State highway, in open areas should be (A) 45 m (B) 30 m (C) 24 m (D) 20 m

Last Answer : Answer: Option A

To set out a parallel from a given inaccessible point to a given line AB, the following observations are made: Distance AB and angle PAM = a and angle PBA = b are measured where M is a point on the line BA produced. The perpendicular to the desired parallel line from A and B are: (A) AB/(cot b - cot a) (B) AB/(cos b - cos a) (C) AB/(cot a - cot b) (D) AB/(cot a - cos b)

Description : To set out a parallel from a given inaccessible point to a given line AB, the following observations are made: Distance AB and angle PAM = a and angle PBA = b are measured where M is a point on the line BA produced. The ... cos b - cos a) (C) AB/(cot a - cot b) (D) AB/(cot a - cos b)

Last Answer : (A) AB/(cot b - cot a)

Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is (A) 80 m (B) 100 m (C) 120 m (D) 150 m

Description : Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is (A) 80 m (B) 100 m (C) 120 m (D) 150 m

Last Answer : Answer: Option C

Non-passing sight distance along a road is the longest distance at which the driver of a moving vehicle, may see an obstacle on the pavement (A) 10 cm high (B) 25 cm high (C) 50 cm high (D) 100 cm high

Description : Non-passing sight distance along a road is the longest distance at which the driver of a moving vehicle, may see an obstacle on the pavement (A) 10 cm high (B) 25 cm high (C) 50 cm high (D) 100 cm high

Last Answer : Answer: Option A

Roughness index of roads, is expressed as (A) Size of the stone on the pavement (B) Number of patches on the pavement (C) Cumulative deformation of surface per horizontal distance (D) Type of the road surface

Description : Roughness index of roads, is expressed as (A) Size of the stone on the pavement (B) Number of patches on the pavement (C) Cumulative deformation of surface per horizontal distance (D) Type of the road surface

Last Answer : Answer: Option C

The maximum safe speed on roads, depends on the (A) Type of road surface (B) Type of curves (C) Sight distance (D) All the above

Description : The maximum safe speed on roads, depends on the (A) Type of road surface (B) Type of curves (C) Sight distance (D) All the above

Last Answer : Answer: Option D

While calculating the overtaking sight distance, the height of the object above road surface, is assumed (A) 50 cm (B) 75 cm (C) 100 cm (D) 120 cm

Description : While calculating the overtaking sight distance, the height of the object above road surface, is assumed (A) 50 cm (B) 75 cm (C) 100 cm (D) 120 cm

Last Answer : Answer: Option D

If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Description : If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Last Answer : Answer: Option C

Formation width of a hill road is the distance between (A) Outer end of side drain to outer end of parapet wall (B) Outer end of side drain to inner end of parapet wall (C) Inner end of side drain to outer end of parapet wall (D) Inner end of side drain to inner end of parapet wall

Description : Formation width of a hill road is the distance between (A) Outer end of side drain to outer end of parapet wall (B) Outer end of side drain to inner end of parapet wall (C) Inner end of side drain to outer end of parapet wall (D) Inner end of side drain to inner end of parapet wall

Last Answer : Answer: Option A

The distance between the towns is only 30 kms as the crow flies. (1) when measured in a straight line (2) when measured in a random manner (3) when measured between the two highest points (4) when the curves of the road are included in the measurement

Description : The distance between the towns is only 30 kms as the crow flies. (1) when measured in a straight line (2) when measured in a random manner (3) when measured between the two highest points (4) when the curves of the road are included in the measurement

Last Answer : 1) when measured in a straight line

What is total land boundary of India? -Geography 9th

Description : What is total land boundary of India? -Geography 9th

Last Answer : It is the seventh-largest country in the world, with a total area of 3,287,263 square kilometres (1,269,219 sq mi). India measures 3,214 km (1,997 mi) from north to south and 2,933 km (1,822 mi) from east to west. It has a land frontier of 15,200 km (9,445 mi) and a coastline of 7,516.6 km

What is the land boundary of Bangladesh ?

Last Answer : : Land boundary of Bangladesh is 4,426 km

India has a land boundary of about _________ km.

Description : India has a land boundary of about _________ km.

Last Answer : 15200

India recently signed land boundary agreement with which country? (1) China (2) Nepal (3) Bhutan (4) Bangladesh

Description : India recently signed land boundary agreement with which country? (1) China (2) Nepal (3) Bhutan (4) Bangladesh

Last Answer : (4) Bangladesh Explanation: India and Bangladesh, on 6 June 2015, signed pact to operationalise the historic Land Boundary Agreement (LBA) between both nations. The operationalisation of LBA paves the way for exchange of 162 enclaves under the control of either countries as per the 1974 pact.

Is there an easy way to automatically buzz people into my apartment building without using the land line?

Description : Is there an easy way to automatically buzz people into my apartment building without using the land line?

Last Answer : No, short of giving them a key, I can’t imagine it could be done.

For flow past a flat plate, if ‘x’ is the distance along the plate in the direction of flow, the boundary layer thickness is proportional to (A) √x (B) 1/√x (C) x (D) 1/x Answe

Description : For flow past a flat plate, if ‘x’ is the distance along the plate in the direction of flow, the boundary layer thickness is proportional to (A) √x (B) 1/√x (C) x (D) 1/x Answe

Last Answer : (A) √x

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

The laminar boundary layer thickness in zero pressure gradient flow over a flat plate along the x-direction varies as x0.5 while the thickness of turbulent boundary layer varies as (where, x = distance from the leading edge) (A) x1.5 (B) x0.8 (C) x-1.5 (D) x-0.8

Description : The laminar boundary layer thickness in zero pressure gradient flow over a flat plate along the x-direction varies as x0.5 while the thickness of turbulent boundary layer varies as (where, x = distance from the leading edge) (A) x1.5 (B) x0.8 (C) x-1.5 (D) x-0.8

Last Answer : (B) x0.8

From the Survey of India map, the distance of the critical point is 20 km and difference in elevation is 193 m. The over land flow time, is (A) 2 hours (B) 3 hours (C) 2 hours and 30 minutes (D) 4 hours

Description : From the Survey of India map, the distance of the critical point is 20 km and difference in elevation is 193 m. The over land flow time, is (A) 2 hours (B) 3 hours (C) 2 hours and 30 minutes (D) 4 hours

Last Answer : Answer: Option D

The wall constructed for the stability of a back filling portion of a road on the downhill side, is known as (A) Retaining wall (B) Breast wall (C) Parapet wall (D) All the above

Description : The wall constructed for the stability of a back filling portion of a road on the downhill side, is known as (A) Retaining wall (B) Breast wall (C) Parapet wall (D) All the above

Last Answer : Answer: Option A

Deviation of the actual road gradient from the proposed contour gradient uphill side, involves (A) Embankment on the centre line (B) Excavation on the centre line (C) Earth work on the centre line (D) None of these

Description : Deviation of the actual road gradient from the proposed contour gradient uphill side, involves  (A) Embankment on the centre line  (B) Excavation on the centre line  (C) Earth work on the centre line  (D) None of these

Last Answer : (B) Excavation on the centre line 

Thickness of broken line markings on multi-lane road for lanes is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : Thickness of broken line markings on multi-lane road for lanes is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : Answer: Option A

Thickness of broken centre line markings for a four lane road, is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : Thickness of broken centre line markings for a four lane road, is generally kept (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : Answer: Option C

What boundary/boundaries do you set and enforce in all of your relationships?

Description : What boundary/boundaries do you set and enforce in all of your relationships?

Last Answer : The need for time to myself. I think it is extremely important to have some time apart from a significant other every now and then. Allowing you to focus on and be fully present with your friends, family and hobbies.

The region of universe that is characterized by complete membership in the set is called A. Core B. Support C. Boundary D. Fuzzy

Description : The region of universe that is characterized by complete membership in the set is called A. Core B. Support C. Boundary D. Fuzzy

Last Answer : A. Core

Define Boundary set.

Description : Define Boundary set.

Last Answer :  Each boundary will not be a point but rather a set of hypotheses called a Boundary set. 

How much would MPG ratings change in cars if they included the cost of road building and maintenance?

Description : How much would MPG ratings change in cars if they included the cost of road building and maintenance?

Last Answer : I think I see where you are going with this. We need to know the total cost per year of US road repair and road building. That would have to include bridges, of course. And we would need to know the ... you get milesroad per gallon of gasoline. If you get us those numbers we're all set .........

Why did the roman's invest so much time and capital into road building?

Description : Why did the roman's invest so much time and capital into road building?

Last Answer : Feel Free to Answer

Match the following: A. Central Building Research Institute 1. Chennai B. Central Road Research Institute 2. Roorkee C. Central drug Research Institute 3. Lucknow D. Central Leather Research Institute 4. New Delhi 5. Dhanbad A B C D (a) 1 2 3 5 (b) 2 4 3 1 (c) 4 3 2 1 (d) 5 4 1 3

Description : Match the following: A. Central Building Research Institute 1. Chennai B. Central Road Research Institute 2. Roorkee C. Central drug Research Institute 3. Lucknow D. Central Leather Research Institute 4. New Delhi 5. Dhanbad A B C D (a) 1 2 3 5 (b) 2 4 3 1 (c) 4 3 2 1 (d) 5 4 1 3

Last Answer : Ans: (b)