What causes convective acceleration in fluid flow? (A) Steep slope in flow (B) Unsteady nature of flow (C) Non-uniformity of flow (D) Turbulence in flow

What causes convective acceleration in fluid flow?
(A) Steep slope in flow
(B) Unsteady nature of flow
(C) Non-uniformity of flow
(D) Turbulence in flow
by

1 Answer

Answer :

(C) Non-uniformity of flow
by

Related questions

The component of acceleration resulting due to unsteady nature of flow is called __________ acceleration. (A) Normal (B) Local (C) Convective (D) Tangential

Description : The component of acceleration resulting due to unsteady nature of flow is called __________ acceleration. (A) Normal (B) Local (C) Convective (D) Tangential

Last Answer : (B) Local

Nature of fluid flow during the opening of a valve in a pipeline is (A) Laminar (B) Unsteady (C) Steady (D) Uniform

Description : Nature of fluid flow during the opening of a valve in a pipeline is (A) Laminar (B) Unsteady (C) Steady (D) Uniform

Last Answer : (B) Unsteady

In which type of fluid flow, the velocity of flow of fluid changes from point to point in the fluid at any instant? (A) Rotational (B) Unsteady (C) Turbulent (D) Non-uniform

Description : In which type of fluid flow, the velocity of flow of fluid changes from point to point in the fluid at any instant? (A) Rotational (B) Unsteady (C) Turbulent (D) Non-uniform

Last Answer : (D) Non-uniform

A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an inversion is reported at 300 feet with turbulence and wind shear. The wind just above the inversion is 090/30. What is the safest departure procedure? a. Take-off is not possible under these conditions b. Depart on runway 09 with a tailwind c. Depart runway 27 with maximum throttle during the passage through the inversion d. Depart runway 27 with as steep an ascent as possible

Description : A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an  inversion is reported at 300 feet with turbulence and wind shear. The wind just above the  ... throttle during the passage through the inversion  d. Depart runway 27 with as steep an ascent as possible

Last Answer : b. Depart on runway 09 with a tailwind

A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an inversion is reported at 300 feet with turbulence and wind shear. The wind just above the inversion is 090/30. What is the safest departure procedure? a. Take-off is not possible under these conditions b. Depart on runway 09 with a tailwind c. Depart runway 27 with maximum throttle during the passage through the inversion d. Depart runway 27 with as steep an ascent as possible

Description : A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an inversion is reported at 300 feet with turbulence and wind shear. The wind just above the ... throttle during the passage through the inversion d. Depart runway 27 with as steep an ascent as possible

Last Answer : b. Depart on runway 09 with a tailwind

Convective heat transfer co-efficient in case of fluid flowing in tubes is not affected by the tube length/diameter ratio, if the flow is in the __________ zone. (A) Laminar (B) Transition (C) Both 'a' & 'b' (D) Highly turbulent

Description : Convective heat transfer co-efficient in case of fluid flowing in tubes is not affected by the tube length/diameter ratio, if the flow is in the __________ zone. (A) Laminar (B) Transition (C) Both 'a' & 'b' (D) Highly turbulent

Last Answer : (D) Highly turbulent

For a laminar flow of fluid in a circular tube, 'h1 ' is the convective heat transfer co-efficient at velocity 'V1 '. If the velocity is reduced by half and assuming the fluid properties are constant, the new convective heat transfer co-efficient is (A) 1.26 h1(B) 0.794 h1(C) 0.574 h1(D) 1.741 h1

Description : For a laminar flow of fluid in a circular tube, 'h1 ' is the convective heat transfer co-efficient at velocity 'V1 '. If the velocity is reduced by half and assuming the fluid properties are constant, the new convective heat transfer co-efficient is (A) 1.26 h1 (B) 0.794 h1 (C) 0.574 h1 (D) 1.741 h1

Last Answer : (B) 0.794 h1

For one dimensional flow of an incompressible fluid in unsteady state in x-direction, the continuity equation is given by (A) ∂u/∂x = 0 (B) ∂(ρu)/∂x = 0 (C) (∂u/∂x) = - (∂ρ/∂t) (D) ∂ρ/∂t = 0

Description : For one dimensional flow of an incompressible fluid in unsteady state in x-direction, the continuity equation is given by (A) ∂u/∂x = 0 (B) ∂(ρu)/∂x = 0 (C) (∂u/∂x) = - (∂ρ/∂t) (D) ∂ρ/∂t = 0

Last Answer : (A) ∂u/∂x = 0

Pick out the wrong statement. (A) Surface tension of a liquid is because of the difference in magnitude of adhesive & cohesive forces(B) A hydrometer used for the determination of specific gravities of liquidsworks on the principle of buoyant forces(C) In case of unsteady fluid flow, the velocity at any given point does notchange with time(D) Turbulent fluid flow is characterised by the rapid fluctuation ofinstantaneous pressure & velocity at a poin

Description : Pick out the wrong statement. (A) Surface tension of a liquid is because of the difference in magnitude of adhesive & cohesive forces (B) A hydrometer used for the determination of ... Turbulent fluid flow is characterised by the rapid fluctuation of instantaneous pressure & velocity at a poin

Last Answer : (C) In case of unsteady fluid flow, the velocity at any given point does not change with time

In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) Discharge of water by a centrifugal pump being run at a constant rpm (B) Water flow in the suction and discharge pipe of a reciprocating pump (C) Water discharge from a vertical vessel in which constant level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Description : In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) ... level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Last Answer : (B) Water flow in the suction and discharge pipe of a reciprocating pump

Use of transverse baffles in a shell and tube heat exchanger is done to increase the (A) Rate of heat transfer (B) Flow velocity (C) Turbulence of shell side fluid (D) All (A), (B) and (C)

Description : Use of transverse baffles in a shell and tube heat exchanger is done to increase the (A) Rate of heat transfer (B) Flow velocity (C) Turbulence of shell side fluid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A flow in which the viscosity of fluid is dominating over the inertia force is called (A) Steady flow (B) Unsteady flow (C) Laminar flow (D) Turbulent flow

Description : A flow in which the viscosity of fluid is dominating over the inertia force is called (A) Steady flow (B) Unsteady flow (C) Laminar flow (D) Turbulent flow

Last Answer : Answer: Option C

The flow of a liquid through tapering pipe at a constant rate is an example of __________ flow. (A) Steady uniform (B) Steady non uniform (C) Unsteady uniform

Description : The flow of a liquid through tapering pipe at a constant rate is an example of __________ flow. (A) Steady uniform (B) Steady non uniform (C) Unsteady uniform

Last Answer : (B) Steady non uniform

Gradually varied flow in open channel is a/an __________ flow. (A) Steady uniform (B) Steady non-uniform (C) Unsteady uniform (D) Unsteady non-uniform

Description : Gradually varied flow in open channel is a/an __________ flow. (A) Steady uniform (B) Steady non-uniform (C) Unsteady uniform (D) Unsteady non-uniform

Last Answer : (B) Steady non-uniform

Unsteady non-uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Description : Unsteady non-uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Last Answer : (C) Expanding tube at increasing rate

An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Description : An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Last Answer : (B) Tapering pipe at either decreasing or increasing flow rate

Water flow in the river during flood can be categorised as the __________ flow. (A) Unsteady uniform (B) Unsteady non-uniform (C) Steady uniform (D) Steady non-uniform

Description : Water flow in the river during flood can be categorised as the __________ flow. (A) Unsteady uniform (B) Unsteady non-uniform (C) Steady uniform (D) Steady non-uniform

Last Answer : Option B

Bulk of the convective heat transfer resistance from a hot tube surfaceto the fluid flowing in it, is(A) In the central core of the fluid(B) Uniformly distributed throughout the fluid(C) Mainly confined to a thin film of fluid near the surface(D) None of these

Description : Bulk of the convective heat transfer resistance from a hot tube surfaceto the fluid flowing in it, is (A) In the central core of the fluid (B) Uniformly distributed throughout the fluid (C) Mainly confined to a thin film of fluid near the surface (D) None of these

Last Answer : (C) Mainly confined to a thin film of fluid near the surface

A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Description : A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Last Answer : (B) 0.025

The main cause of meandering is (A) Presence of an excessive bed slope in the river (B) Degradation (C) The extra turbulence generated by the excess of river sediment during floods (D) None of the above

Description : The main cause of meandering is (A) Presence of an excessive bed slope in the river (B) Degradation (C) The extra turbulence generated by the excess of river sediment during floods (D) None of the above

Last Answer : Answer: Option C

How do contour lines show a steep slope?

Description : How do contour lines show a steep slope?

Last Answer : The closer together the lines are - the steeper the slope.

What is a material that accumulates at the bottom of a steep slope?

Description : What is a material that accumulates at the bottom of a steep slope?

Last Answer : The general term for material that falls down and gathers at the foot of a steep cliff or mountain face is scree.

How do contour lines show a steep slope?

Description : How do contour lines show a steep slope?

Last Answer : The closer together the lines are - the steeper the slope.

A steep slope on a phase change graph indicates?

Description : A steep slope on a phase change graph indicates?

Last Answer : Heirhey

_______ is more prevalent in analog signals that have steep slopes or whose amplitudes vary rapidly. A. Peak limiting B. Quantization noise C. Granular noise D. Slope overload

Description : _______ is more prevalent in analog signals that have steep slopes or whose amplitudes vary rapidly. A. Peak limiting B. Quantization noise C. Granular noise D. Slope overload

Last Answer : D. Slope overload

Landslides occur because ofA) Rainfall B) Steep slope C) Deforestation D) All of the above.

Description : Landslides occur because of A) Rainfall B) Steep slope C) Deforestation D) All of the above.

Last Answer : D) All of the above.

A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Description : A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Last Answer : (A) Steep slope

Pick up the correct statement from the following: (A) The throat of the section of a control meter is either rectangular or trapezoidal (B) The floor of the control meter throat is almost level (C) The floor of the expanding outlet of the control meter is given a steep slope (D) All the above

Description : Pick up the correct statement from the following: (A) The throat of the section of a control meter is either rectangular or trapezoidal (B) The floor of the control meter throat is almost level (C) The floor of the expanding outlet of the control meter is given a steep slope (D) All the above

Last Answer : Answer: Option D

If the cross slope of a country is 25% to 60%, the terrain is classified as (A) Plain (B) Rolling (C) Steep (D) Mountainous

Description : If the cross slope of a country is 25% to 60%, the terrain is classified as (A) Plain (B) Rolling (C) Steep (D) Mountainous

Last Answer : Answer: Option D

If cross slope of a country is 10% to 25%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

Description : If cross slope of a country is 10% to 25%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

Last Answer : Answer: Option A

If cross slope of a country is upto 10% the terrain is classified as (A) Plain (B) Rolling (C) Mountainous (D) Steep

Description : If cross slope of a country is upto 10% the terrain is classified as (A) Plain (B) Rolling (C) Mountainous (D) Steep

Last Answer : Answer: Option A

If cross slope of a country is greater than 60%, the terrain is classified as(A) Rolling (B) Mountainous (C) Steep (D) Plain

Description : If cross slope of a country is greater than 60%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

Last Answer : Answer: Option C

A man builds a house rectangular in shape. All sides have southern exposure. A bear walks by the house. What color is the bear? Why? (This one could drive you nuts and should only be attempted by those with high self esteem. If you are seeing a therapist, DO NOT ATTEMPT THIS QUESTION!) ...black...bears are black ...white... ...brown...the house is on a steep slope There is no answer and this is a stupid question.

Description : A man builds a house rectangular in shape. All sides have southern exposure. A bear walks by the house. What color is the bear? Why? (This one could drive you nuts and should only be attempted by those ... ..brown...the house is on a steep slope There is no answer and this is a stupid question.

Last Answer : ..white...

In marketing channels, conflict occurs in marketing channels working at same level is classified as A. steep conflict B. slope conflict C. vertical conflict D. horizontal conflict

Description : In marketing channels, conflict occurs in marketing channels working at same level is classified as A. steep conflict B. slope conflict C. vertical conflict D. horizontal conflict

Last Answer : D. horizontal conflict

A series of closely spaced contour lines represent a (a) Steep slope* (b) Gentle slope (c) Uniform slope (d) Plane surface

Description : A series of closely spaced contour lines represent a (a) Steep slope* (b) Gentle slope (c) Uniform slope (d) Plane surface

Last Answer : (a) Steep slope*

________are defined as free falling fragments of rocks from steep cliff or slope. (A) Rockfalls (B) Toppling (C) Debris avalanche (D) Earthflow

Description : ________are defined as free falling fragments of rocks from steep cliff or slope. (A) Rockfalls (B) Toppling (C) Debris avalanche (D) Earthflow

Last Answer : (A) Rockfalls  

Mass transfer rate between two fluid phases does not necessarily depend on the __________ of the two phases. (A) Chemical properties (B) Physical properties (C) Degree of turbulence (D) Interfacial area

Description : Mass transfer rate between two fluid phases does not necessarily depend on the __________ of the two phases. (A) Chemical properties (B) Physical properties (C) Degree of turbulence (D) Interfacial area

Last Answer : (A) Chemical properties

. Pick out the wrong statement. (A) The eddy viscosity is a function of(B) The eddy viscosity is a fluid property(C) The viscosity of gas increases with increase in temperature(D) The viscosity of a liquid increases with decrease in temperature the type of turbulence involved

Description : . Pick out the wrong statement. (A) The eddy viscosity is a function of the type of turbulence involved (B) The eddy viscosity is a fluid property (C) The viscosity of gas increases with increase in temperature (D) The viscosity of a liquid increases with decrease in temperature

Last Answer : (B) The eddy viscosity is a fluid property

18. A flow through an expanding tube at increasing rate is called unsteady non-uniform flow. A) Yes B) No

Description : 18. A flow through an expanding tube at increasing rate is called unsteady non-uniform flow. A) Yes B) No

Last Answer : A

When the flow in an open channel is gradually varied, the flow is said to be (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Description : When the flow in an open channel is gradually varied, the flow is said to be (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Last Answer : Answer: Option B

A flow through a long pipe at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Description : A flow through a long pipe at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Last Answer : Answer: Option A

A flow through an expanding tube at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Description : A flow through an expanding tube at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Last Answer : Answer: Option B

Inductive reasoning is grounded on: (A) Harmony of nature (B) Integrity of nature (C) Unity of nature (D) Uniformity of nature

Description : Inductive reasoning is grounded on: (A) Harmony of nature (B) Integrity of nature (C) Unity of nature (D) Uniformity of nature

Last Answer : (D) Uniformity of nature

Inductive reasoning presupposes (A) unity in human nature (B) integrity in human nature (C) uniformity in human nature (D) harmony in human nature

Description : Inductive reasoning presupposes (A) unity in human nature (B) integrity in human nature (C) uniformity in human nature (D) harmony in human nature

Last Answer : Answer: C

. In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with increasing Reynolds number (C) Point of maximum instability exists at a distance of 2r/3 from the pipe wall (r = pipe radius) (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Description : . In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with ... , shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Last Answer : (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Unsteady state heat conduction occurs, when (A) Temperature distribution is independent of time (B) Temperature distribution is dependent on time (C) Heat flows in one direction only (D) Three dimensional heat flow is concerned

Description : Unsteady state heat conduction occurs, when (A) Temperature distribution is independent of time (B) Temperature distribution is dependent on time (C) Heat flows in one direction only (D) Three dimensional heat flow is concerned

Last Answer : (B) Temperature distribution is dependent on time

Unsteady uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Description : Unsteady uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Last Answer : (B) Long pipe at decreasing rate

Mass velocity is independent of temperature & pressure, when the flow is (A) Unsteady through unchanged cross-section (B) Steady through changing cross-section (C) Steady and the cross-section is unchanged (D) Unsteady and the cross-section is changed

Description : Mass velocity is independent of temperature & pressure, when the flow is (A) Unsteady through unchanged cross-section (B) Steady through changing cross-section (C) Steady and the cross-section is unchanged (D) Unsteady and the cross-section is changed

Last Answer : (C) Steady and the cross-section is unchanged

The energy equation, E + (p/ρ) + (V 2 /2g) + gZ = constant (E = internal energy/mass), is applicable to (A) Perfect gases only (B) Isothermal flow of gases (C) Adiabatic unsteady flow of gases (D) All compressible fluids

Description : The energy equation, E + (p/ρ) + (V 2 /2g) + gZ = constant (E = internal energy/mass), is applicable to (A) Perfect gases only (B) Isothermal flow of gases (C) Adiabatic unsteady flow of gases (D) All compressible fluids

Last Answer : (D) All compressible fluids

One dimensional flow implies (A) Flow in a straight line (B) Steady uniform flow (C) Unsteady uniform flow (D) A flow which does not account for changes in transverse direction

Description : One dimensional flow implies (A) Flow in a straight line (B) Steady uniform flow (C) Unsteady uniform flow (D) A flow which does not account for changes in transverse direction

Last Answer : (D) A flow which does not account for changes in transverse direction