Description : By over-reinforcing a beam, the moment of resistance can be increased not more than (A) 10 % (B) 15 % (C) 20 % (D) 25 %
Last Answer : Answer: Option D
Description : When estimating project time schedules using industry standards for a systems project, the following values are acceptable: 15% for planning, 25% for analysis, 50% for design, and 10% for implementation.
Last Answer : Ans: False
Description : XYZ Co, is having 15% share capital held by X Company and 50% held by Central Government and 10% held by State Government and 25% held by other people then that company will be A. Government Company B. Private Company C. Public Company D. None of these
Last Answer : C. Public Company
Description : The strength of concrete after one year as compared to 28 days strength is about (A) 10 to 15% more (B) 15 to 20% more (C) 20 to 25% more (D) 25 to 50% more
Last Answer : Answer: Option C
Description : Pick up the correct statement from the following: (A) Domestic use of water is 50% of total consumption (B) Average consumption of commercial use of water is 25% of total consumption (C) Waste water and leakage is 15% of total consumption (D) All the above
Last Answer : (D) All the above
Description : Reduction of load capacity in a ruling gradient of (A) 1 in 10, is 10% (B) 1 in 15, is 15% (C) 1 in 20, is 10% (D) 1 in 25, is 25%
Description : The percentage of water for normal consistency, is (A) 5% to 15% (B) 10% to 25% (C) 15% to 25% (D) 20% to 30%
Description : The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%
Last Answer : (b) 10 to 15%
Description : Pick up the correct statement from the following: (A) The quality of water governs the strength of concrete (B) 10% excess of water reduces the strength of concrete by 15% (C) 30% excess of water reduces the strength of concrete by 50% (D) All the above
Description : The tensile strength of concrete is about ________ of its compressive strength [ A ] 10% to 15% [ B ] 30% to 40% [ C ] 50% [ D ] 60% to 75%
Last Answer : [ A ] 10% to 15%
Description : If first class Brick is immersed in water for 24 hours it should not absorb water by weight more than a) 10% b) 15% c) 20% * d) 25%
Last Answer : c) 20% *
Description : _______ percentage of Payment Bank‟s branches must be in the unbanked rural area. A. 25% B. 10% C. 15% D. 20% E. None of the Above
Last Answer : A. 25% Explanation: 25% of Payment Bank‘s branches must be in the unbanked rural area.
Description : Bench terraces are constructed in — % land slope area ? a. 10% b. 15% c. 25% d. 20%
Last Answer : b. 15%
Description : What happens to a product priced at $1 above or below the segment guideline when a segment’s product supply outstrips demand? a. It loses 25% of its appeal. b. It loses 10% of its appeal. c. It loses 20% of its appeal. d. It loses 15% of its appeal. e. None of the above.
Last Answer : c. It loses 20% of its appeal.
Description : It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The ... 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min
Last Answer : (C) 71 min
Description : A concrete using an air entrained cement (A) Has strength less than 10% to 15% (B) Has more resistance to weathering (C) Is more plastic and workable (D) Is free from segregation and bleeding
Description : Which one of these statements is correct? A. There is a slow decline in digital budgets with an average reduction of 10% in digital marketing budget. B. 98% of marketers affirm that offline ... 50% less than marketing professionals. D. Around 25% of the global population is now on the Internet.
Last Answer : B. 98% of marketers affirm that offline and online marketing are merging
Description : Which one of these statements is correct? A. There is a slow decline in digital budgets with an average reduction of 10% in digital marketing budget. B. 98% of marketers affirm that offline ... 50% less than marketing professionals. D. Around 25% of the global population is now on the Internet
Description : The main reason for providing number of reinforcing bars at a support in a simply supported beam is to resist in that zone (A) Compressive stress (B) Shear stress (C) Bond stress (D) Tensile stress
Description : The average permissible stress in bond for plain bars in tension is (A) Increased by 10% for bars in compression (B) Increased by 25% for bars in compression (C) Decreased by 10% for bars in compression (D) Decreased by 25% for bars in compression
Last Answer : Answer: Option B
Description : Accumulators should have adequate volume to store refrigerant charge at least (a) 10% (b) 25% (c) 50% (d) 75%
Last Answer : Ans: c
Description : The minimum number of bags which a UBO will be authorised to keep will generally be equal to the number of bags required for despatch for the day plus: (A) 10% (B) 20% (C) 25% (D) 50%
Last Answer : (A) 10%
Description : What percentage of the human genome is identical to the yeast genome? a. 5% b. 10% c. 25% d. 50%
Last Answer : c. 25%
Description : What happens to a product’s Perceived Age when it is repositioned in R&D? a. It is reduced by 50%. b. It is reduced by 33.3%. c. It is reduced by 25%. d. It is reduced by 10%. e. It remains the same.
Last Answer : a. It is reduced by 50%.
Description : When you sell capacity what percentage of your original investment do you receive? a. 65% c. 50% b. 25% d. 10%
Last Answer : a. 65%
Description : The enrolment in higher education in India is contributed both by Formal System of Education and by System of Distance Education. Distance education contributes (A) 50% of formal system (B) ... 's contribution is not taken into account while considering the figures of enrolment in higher education
Last Answer : Answer: B Education in India is provided by the public sector as well as the private sector, with control and funding coming from three levels: central, state, and local. Under various articles ... 6% enrollment in higher education is actually 60% of those who are eligible to join higher education.
Description : A salesman sold an book at a loss of 25%. If the selling price had been increased by Rs. 150, there would have been a gain of 15%. The cost price of the book was:
Last Answer : Let the C.P. of book be Rs. x. 115% of x - 75% of x = Rx. 150 40% of x = Rx. 150 x = Rs. (150×100)/40 x= Rs. 375
Description : Answer: b Metabolic response to injury results in increased energy expenditure. If energy intake is less than expenditure, oxidation of body fat stores and erosion of lean body mass will occur ... requirements, caloric requirements should be distributed at a ratio of 70% as glucose and 30% as fat
Last Answer : Which of the following statement(s) is/are true concerning body fuel reserves? a. The largest fuel reserve in the body is skeletal muscle b. Fat provides about 9 calories/gram c. Free glucose and glycogen stores are a trivial fuel reserve d. Body protein is a valuable storage form of energy
Description : In order that there may be a profit of 15% after allowing a discount of 10% on the marked price, The marked price of an book has to be increased by %?
Last Answer : Mp= Rs x Sp= 90x/100= 9x/10 Mp= 9x/10*100/115=18x/23 Mp has increased by (x-18x/23)/(18x/23)*100 =27.7%
Description : In shafts with keyways the allowable stresses are usually ------------ proportional to the twisting moment. a.25% b. 50% c. 75% d. 95%
Last Answer : c. 75%
Description : If the disposal income of a household increases by 10% and the demand for X commodity increased by 25%. The income elasticity of X is (a) 1.5 ; (b) -0.5 ; (c) 2.5 ; (d) -2.5
Last Answer : ; (c) 2.5 ;
Description : Normally, the tensile strength of concrete is about____________of its compressive strength (a) 10 to 15% (b) 15 to 20% (c) 20 to 25% (d) 25 to 30%
Last Answer : (a) 10 to 15%
Description : Minimum reinforcement in slabs, when High yield strength deformed bars [ A ] 0.12% of gross cross sectional area [ B ] 0.15% of gross cross sectional area [ C ] 0.20% of gross cross sectional area [ D ] 0.25% of gross cross sectional area.
Last Answer : [ A ] 0.12% of gross cross sectional area
Description : The Minimum percentage of secondary steel in slabs for Fe- 415 grade steel should be __________ of Gross cross-section area [ A ] 0.12% [ B ] 0.15% [ C ] 0.20% [ D ] 0.25%
Last Answer : [ A ] 0.12%
Description : Minimum steel in the main direction of a slab when using high yield steel [ A ] 0.12% [ B ] 0.15% [ C ] 0.20% [ D ] 0.25%
Last Answer : [ B ] 0.15%
Description : The bond stress for deformed bars is more than that in plain bars by [ A ] 25% [ B ] 40% [ C ] 60% [ D ] 50%
Last Answer : [ B ] 40%
Description : The bond stress for plain bars in compression is more than that for bars in tension by [ A ] 25% [ B ] 40% [ C ] 60% [ D ] 50%
Last Answer : [ A ] 25%
Description : For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%
Last Answer : Answer: Option A
Description : In fineness test on cement, residue left on I.S. sieve no.9 shall not exceed __________ by weight of the sample of cement [ A ] 5% [ B ] 10% [ C ] 15% [ D ] 20%
Last Answer : [ B ] 10%
Description : The percentage of water for making a cement paste of normal consistency varies from (a) 15 to 25% (b) 25 to 35% (c) 35 to 50% (d) 50 to 60%
Last Answer : (b) 25 to 35%
Description : For ductility consideration, the maximum percentage of steel used should not exceed ------- of the balanced steel [ A ] 25% [ B ] 50% [ C ] 60% [ D ] 75%
Last Answer : [ D ] 75%
Description : A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n1. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is (A) bn (fc ... (B) Atft (d - n/3) (C) ½ n1 (1 - n1/3) cbd² (D) All the above
Description : If cross slope of a country is 10% to 25%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain
Description : The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm
Description : For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than (A) 15 mm (B) 25 mm (C) 30 mm (D) 40 mm
Description : Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of ... (D) The number of longitudinal bars provided in a circular column should not be less than four
Description : The clear cover in a simply supported slab should not be less than the diameter of the reinforcing bar (a) Correct (b) Incorrect’ (c) Not known (d) None of these
Last Answer : (a) Correct
Description : Select the incorrect statement from the following [ A ] Reinforcing bars in a column should not be less than 12 mm in diameter [ B ] The number of longitudinal bars in a circular column should not ... The minimum percentage of longitudinal steel in columns should be 0.8% [ D ] None of the above
Last Answer : [ B ] The number of longitudinal bars in a circular column should not exceed four
Description : A reinforcing slab, build monolithically with the supporting columns and is reinforced in two or more directions, without any provision of beams is called a (a) Two way slab (b) Flat slab (c) Continus slab (d) Cireulashion
Last Answer : (b) Flat slab