The rise of liquid along the walls of a revolving cylinder about the initial level is __________ the depression of the liquid at the axis of rotation. (A) Same as (B) Less than (C) More than (D) None of these

The rise of liquid along the walls of a revolving cylinder about the initial level is __________ the
depression of the liquid at the axis of rotation.
(A) Same as
(B) Less than
(C) More than
(D) None of these
by

1 Answer

Answer :

Answer: Option A
by

Related questions

When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow

Description : When a cylindrical vessel, containing some liquid, is rotated about its vertical axis, the liquid surface is depressed down at the axis of its rotation and rises up near the walls of the vessel on all sides. This type of flow is known as (A) Steady flow (B) Turbulent flow (C) Vortex flow

Last Answer : Answer: Option C

Wet grinding in a revolving mill __________ as compared to dry grinding. (A) Gives less wear on chamber walls (B) Requires more energy (C) Increases capacity (D) Complicates handling of the product

Description : Wet grinding in a revolving mill __________ as compared to dry grinding. (A) Gives less wear on chamber walls (B) Requires more energy (C) Increases capacity (D) Complicates handling of the product

Last Answer : (C) Increases capacity

A centrifugal filtration unit operating at a rotational speed of w has inner surface of the liquid (density ρL) located at a radial distance R from the axis of rotation. The thickness of the liquid film is δ and no cake is formed. The initial pressure drop during filtration is (A) ½w 2 . R 2 . ρL (B) ½w 2 . δ 2 . ρL (C) ½w 2 . δρL (2R + δ) (D) ½w 2 . R . ρL(R + 2δ)

Description : A centrifugal filtration unit operating at a rotational speed of w has inner surface of the liquid (density ρL) located at a radial distance R from the axis of rotation. The thickness of the liquid film is δ and no cake is formed. The ... . ρL (C) ½w 2 . δρL (2R + δ) (D) ½w 2 . R . ρL(R + 2δ)

Last Answer : (C) ½w 2 . δρL (2R + δ)

A liquid flows through a capillary tube. Then the velocity of the liquid is (a) Maximum at the walls of the tubs (b) Constant at all points in the cross section of the tube (c) Maximum along the axis of the tube (d) Independent of the pressure-head

Description : A liquid flows through a capillary tube. Then the velocity of the liquid is (a) Maximum at the walls of the tubs (b) Constant at all points in the cross section of the tube (c) Maximum along the axis of the tube (d) Independent of the pressure-head

Last Answer : Ans:(c)

Pick up the correct statement from the following: (A) Hoop strain of the walls of a cylinder due to liquid is (pd/2tE) (1 - 1/2m) (B) Longitudinal strain in the walls of a cylinder due to liquid is (pd/2tE) (1/2 - 1/m) (C) Volumetric change in the cylinder due to liquid is (pd/2tE) (5/2 - 2/m) (D) All the above

Description : Pick up the correct statement from the following:  (A) Hoop strain of the walls of a cylinder due to liquid is (pd/2tE) (1 - 1/2m)  (B) Longitudinal strain in the walls of a cylinder due to liquid is ... change in the cylinder due to liquid is (pd/2tE) (5/2 - 2/m)  (D) All the above 

Last Answer : (D) All the above 

The stress in the wall of a cylinder in a direction normal to its longitudinal axis, due to a force acting along the circumference, is known as (A) Yield stress(B) Longitudinal stress (C) Hoop stress (D) Circumferential stress

Description : The stress in the wall of a cylinder in a direction normal to its longitudinal axis, due to a force  acting along the circumference, is known as  (A) Yield stress  (B) Longitudinal stress  (C) Hoop stress  (D) Circumferential stress 

Last Answer : (C) Hoop stress

The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Description : The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Last Answer : (C) Orientation

With an increase in size of tube, the rise or depression of liquid in the tube due to surface tension will (A) Decrease (B) Increase (C) Remain unchanged (D) Depend upon the characteristics of liquid

Description : With an increase in size of tube, the rise or depression of liquid in the tube due to surface tension will (A) Decrease (B) Increase (C) Remain unchanged (D) Depend upon the characteristics of liquid

Last Answer : Answer: Option A

The rise or depression of liquid in a tube due to surface tension will increase in size of tube will (A) Increase (B) Remain unaffected (C) May increase or decrease depending on the characteristics of liquid (D) Decrease

Description : The rise or depression of liquid in a tube due to surface tension will increase in size of tube will (A) Increase (B) Remain unaffected (C) May increase or decrease depending on the characteristics of liquid (D) Decrease

Last Answer : Answer: Option D

In modeling of a tabulated cylinder, the plane of the curve is _______ a.along the curve b.normal to the curve c.along the axis of the cylinder d.perpendicular to the axis of the cylinder

Description : In modeling of a tabulated cylinder, the plane of the curve is _______ a.along the curve b.normal to the curve c.along the axis of the cylinder d.perpendicular to the axis of the cylinder

Last Answer : d.perpendicular to the axis of the cylinder

Center of gravity of an irregular body lies on the A. edgeB. center of body C. point of intersection of lines D. along the axis of rotation

Description : Center of gravity of an irregular body lies on the A. edge B. center of body C. point of intersection of lines D. along the axis of rotation

Last Answer : point of intersection of lines

Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock

Description : Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock

Last Answer : (A) Type of fuels viz. solid, liquid or gaseous

While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the same position in its tube, it indicates (A) The rotation axis is vertical (B) The trunnion axis is horizontal (C) The line of collimation is perpendicular to vertical axis (D) None of the above

Description : While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the  same position in its tube, it indicates  (A) The rotation axis is vertical  (B) The trunnion ... (C) The line of collimation is perpendicular to vertical axis  (D) None of the above

Last Answer : (A) The rotation axis is vertical

The season changes because of the ------? A. Moon is revolving round the earth B. Earth is revolving round its axis C. Earth is revolving round the sun (Answer) D. Planet Mars is attracting the sun

Description : The season changes because of the ------? A. Moon is revolving round the earth B. Earth is revolving round its axis C. Earth is revolving round the sun (Answer) D. Planet Mars is attracting the sun

Last Answer : C. Earth is revolving round the sun (Answer)

A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Description : A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Last Answer : (D) All the above

In a theodolite (A) The telescope axis is perpendicular to transit axis (B) The axis of rotation is perpendicular to transit axis (C) The telescope axis, the transit axis and the rotation axis pass through the centre of theodolite (D) All the above

Description : In a theodolite (A) The telescope axis is perpendicular to transit axis (B) The axis of rotation is perpendicular to transit axis (C) The telescope axis, the transit axis and the rotation axis pass through the centre of theodolite (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

An increase in temperature on the top fibre of a simply supported beam will cause (a) Downward deflection (b) Upward deflection (c) No deflection (d) Angular rotation about neutral axis

Description : An increase in temperature on the top fibre of a simply supported beam will cause (a) Downward deflection (b) Upward deflection (c) No deflection (d) Angular rotation about neutral axis

Last Answer : Upward deflection

The initial basin recharge is equal to (A) Interception (B) Depression storage (C) Rain absorbed by the moisture deficiency (D) All the above

Description : The initial basin recharge is equal to (A) Interception (B) Depression storage (C) Rain absorbed by the moisture deficiency (D) All the above

Last Answer : Answer: Option D

The dynamic viscosity of the liquid __________ with rise in temperature. (A) Remain unaffected (B) Increases (C) Decreases (D) None of these

Description : The dynamic viscosity of the liquid __________ with rise in temperature. (A) Remain unaffected (B) Increases (C) Decreases (D) None of these

Last Answer : Answer: Option C

The tangent to the liquid surface in a level tube, is parallel to the axis of the level tube at (A) Every point of the bubble (B) Either end of the bubble (C) The mid-point of the bubble (D) No where

Description : The tangent to the liquid surface in a level tube, is parallel to the axis of the level tube at  (A) Every point of the bubble  (B) Either end of the bubble  (C) The mid-point of the bubble  (D) No where

Last Answer : (C) The mid-point of the bubble 

A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Description : A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Last Answer : (D) Bending stress is same at every section along its longitudinal axis

The moon is showing its same face to the earth because – (1) It is not rotating about its own axis (2) Its rotation and revolution are opposite (3) Its periods of rotation and revolution are the same (4) Its rotation is faster than its revolution

Description : The moon is showing its same face to the earth because – (1) It is not rotating about its own axis (2) Its rotation and revolution are opposite (3) Its periods of rotation and revolution are the same (4) Its rotation is faster than its revolution

Last Answer : (3) Its periods of rotation and revolution are the same Explanation: Because it is "tidally-locked" to the Earth. The Earth's gravity slows down the moon's rotation, so that it rotates at the same ... who walks around a center pole, but shifts their body so they are always facing it as they walk.

We always see the same lace of the moon, because – (1) It is smaller than the earth (2) It revolves on its axis in a direction opposite to that of the earth (3) It takes equal time for revolution around the earth and rotation on its own axis (4) It rotates at the same speed as the earth around the sun

Description : We always see the same lace of the moon, because - (1) It is smaller than the earth (2) It revolves on its axis in a direction opposite to that of the earth (3) It takes equal time for revolution ... the earth and rotation on its own axis (4) It rotates at the same speed as the earth around the sun

Last Answer : (3) It takes equal time for revolution around the earth and rotation on its own axis Explanation: It is tidal locking that causes the synchronous rotation which causes the Moon to present "just one side ... to revolve (orbit) around the Earth. So it maintains a "constant face" in our direction.

We always see the same lace of the moon, because – (1) It is smaller than the earth (2) It revolves on its axis in a direction opposite to that of the earth (3) It takes equal time for revolution around the earth and rotation on its own axis (4) It rotates at the same speed as the earth around the sun

Description : We always see the same lace of the moon, because - (1) It is smaller than the earth (2) It revolves on its axis in a direction opposite to that of the earth (3) It takes equal time for revolution ... the earth and rotation on its own axis (4) It rotates at the same speed as the earth around the sun

Last Answer : (3) It takes equal time for revolution around the earth and rotation on its own axis Explanation: It is tidal locking that causes the synchronous rotation which causes the Moon to present "just one side ... to revolve (orbit) around the Earth. So it maintains a "constant face" in our direction.

We always see the same face of the moon, because (1) it is smaller than the earth (2) it revolves on its axis in a direction opposite to that of the earth (3) it takes equal time for revolution around the earth and rotation on its own axis (4) it rotates at the same speed as the earth around the sun

Description : We always see the same face of the moon, because (1) it is smaller than the earth (2) it revolves on its axis in a direction opposite to that of the earth (3) it takes equal time for revolution around the earth and rotation on its own axis (4) it rotates at the same speed as the earth around the sun

Last Answer : it takes equal time for revolution around the earth and rotation on its own axis

The moon is showing its same face to the earth because (1) It is not rotating about its own axis (2) Its rotation and revolution are opposite (3) Its periods of rotation and revolution are the same (4) Its rotation is faster than its revolution

Description : The moon is showing its same face to the earth because (1) It is not rotating about its own axis (2) Its rotation and revolution are opposite (3) Its periods of rotation and revolution are the same (4) Its rotation is faster than its revolution

Last Answer : Its periods of rotation and revolution are the same

Parapet walls along hill roads, are provided (A) To retain the back filling (B) To prevent the hill from sliding (C) To prevent the wheels of the vehicle from coming on the retaining wall (D) None of these

Description : Parapet walls along hill roads, are provided (A) To retain the back filling (B) To prevent the hill from sliding (C) To prevent the wheels of the vehicle from coming on the retaining wall (D) None of these

Last Answer : Answer: Option C

The usual width of parapet walls along Highways in hilly region, is (A) 50 cm (B) 60 cm (C) 70 cm (D) 80 cm

Description : The usual width of parapet walls along Highways in hilly region, is (A) 50 cm (B) 60 cm (C) 70 cm (D) 80 cm

Last Answer : Answer: Option B

Carpet area does not include the area of (A) The walls along with doors and other openings (B) Bath room and lavatory (C) Kitchen and pantry (D) All the above

Description : Carpet area does not include the area of (A) The walls along with doors and other openings (B) Bath room and lavatory (C) Kitchen and pantry (D) All the above

Last Answer : (D) All the above

Which of the following is not a characteristic feature of yield lines? [ A ] Yield lines end at a slab boundary [ B ] Yield lines are of parabolical shape [ C ] Axes of rotation generally lie along the lines of supports [ D ] None of the above.

Description : Which of the following is not a characteristic feature of yield lines? [ A ] Yield lines end at a slab boundary [ B ] Yield lines are of parabolical shape [ C ] Axes of rotation generally lie along the lines of supports [ D ] None of the above.

Last Answer : [ B ] Yield lines are of parabolical shape

When a plate is immersed in a liquid parallel to the flow, it will be subjected to a pressure __________ that if the same plate is immersed perpendicular to the flow. (A) Less than (B) More than (C) Equal to (D) None of these

Description : When a plate is immersed in a liquid parallel to the flow, it will be subjected to a pressure __________ that if the same plate is immersed perpendicular to the flow. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

The distance travelled by revolving the wheel of a vehicle more than its circumferential movement, is known as (A) Slip (B) Skid (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : The distance travelled by revolving the wheel of a vehicle more than its circumferential movement, is known as (A) Slip (B) Skid (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option B

In case of a revolving mill, wet grinding compared to dry grinding (A) Requires more energy (B) Has less capacity (C) Complicates handling & classification of the product (D) None of these

Description : In case of a revolving mill, wet grinding compared to dry grinding (A) Requires more energy (B) Has less capacity (C) Complicates handling & classification of the product (D) None of these

Last Answer : (D) None of these

A __________ mill is a revolving mill divided into two or more sections by perforated partitions in which preliminary grinding takes place at one end and the finishing grinding at the discharge end. (A) Compartment (B) Tube (C) Rod (D) Pebble

Description : A __________ mill is a revolving mill divided into two or more sections by perforated partitions in which preliminary grinding takes place at one end and the finishing grinding at the discharge end. (A) Compartment (B) Tube (C) Rod (D) Pebble

Last Answer : (A) Compartmen

Correction per chain length of 100 links along a slope having a rise of 1 unit in horizontal units, is (A) 100/n² (B) 100 n 2 (C) 100/n 3 (D) 100/n

Description : Correction per chain length of 100 links along a slope having a rise of 1 unit in horizontal units,  is  (A) 100/n² (B) 100 n 2 (C) 100/n 3 (D) 100/n

Last Answer : (A) 100/n²

A liquid compressed in cylinder has a volume of 0.04 m3 at 50 kg/cm² and a volume of 0.039 m3 at 150 kg/cm². The bulk modulus of elasticity of liquid is (A) 400 kg/cm² (B) 4000 kg/cm² (C) (D)

Description : A liquid compressed in cylinder has a volume of 0.04 m3 at 50 kg/cm² and a volume of 0.039 m3 at 150 kg/cm². The bulk modulus of elasticity of liquid is (A) 400 kg/cm² (B) 4000 kg/cm² (C) (D)

Last Answer : Answer: Option B

When the torsional pendulum vibrating the observed amplitudes on the same side of neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5

Description : When the torsional pendulum vibrating the observed amplitudes on the same side of neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5

Last Answer : C 0.693

When the torsional pendulum vibrating, the observed amplitudes on the same side of the neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5

Description : When the torsional pendulum vibrating, the observed amplitudes on the same side of the neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5

Last Answer : C 0.693

A cylinder contains 640 gm of liquid oxygen. The volume occupied (in litres) by the oxygen, when it is released and brought to standard conditions (0°C, 760 mm Hg) will be __________ litres. (A) 448 (B) 224 (C) 22.4 (D) Data insufficient; can't be computed

Description : A cylinder contains 640 gm of liquid oxygen. The volume occupied (in litres) by the oxygen, when it is released and brought to standard conditions (0°C, 760 mm Hg) will be __________ litres. (A) 448 (B) 224 (C) 22.4 (D) Data insufficient; can't be computed

Last Answer : (A) 448

The ratio of circumferential stress to the longitudinal stress in the walls of a cylindrical shell, due to flowing liquid, is (A) ½ (B) 1 (C) 1½ (D) 2

Description : The ratio of circumferential stress to the longitudinal stress in the walls of a cylindrical shell, due  to flowing liquid, is  (A) ½  (B) 1  (C) 1½  (D) 2 

Last Answer : (D) 2 

When a liquid is flowing through a pipe, the velocity of the liquid is (A) Maximum at the centre and minimum near the walls (B) Minimum at the centre and maximum near the walls (C) Zero at the centre and maximum near the walls (D) Maximum at the centre and zero near the walls

Description : When a liquid is flowing through a pipe, the velocity of the liquid is (A) Maximum at the centre and minimum near the walls (B) Minimum at the centre and maximum near the walls (C) Zero at the centre and maximum near the walls (D) Maximum at the centre and zero near the walls

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) Louvered door is generally provided in bath rooms (B) Flush door is generally provided in dining room (C) Revolving door is generally provided in cinema halls (D) Sliding door is generally provided in show rooms

Description : Pick up the correct statement from the following: (A) Louvered door is generally provided in bath rooms (B) Flush door is generally provided in dining room (C) Revolving door is generally provided in cinema halls (D) Sliding door is generally provided in show rooms

Last Answer : Answer: Option C

Trommels are revolving screens which normally operate in the range of __________ rpm. (A) 1 - 2 (B) 15 - 20 (C) 40 - 50 (D) 60 - 75

Description : Trommels are revolving screens which normally operate in the range of __________ rpm. (A) 1 - 2 (B) 15 - 20 (C) 40 - 50 (D) 60 - 75

Last Answer : (B) 15 - 20

__________ mill is not a revolving mill. (A) Pebble (B) Compartment (C) Cage (D) Tube

Description : __________ mill is not a revolving mill. (A) Pebble (B) Compartment (C) Cage (D) Tube

Last Answer : (C) Cage

A close coil helical spring when subjected to a moment M having its axis along the axis of the helix (A) It is subjected to pure bending (B) Its mean diameter will decrease (C) Its number of coils will increase (D) All the above

Description : A close coil helical spring when subjected to a moment M having its axis along the axis of the helix  (A) It is subjected to pure bending  (B) Its mean diameter will decrease  (C) Its number of coils will increase  (D) All the above 

Last Answer : (A) It is subjected to pure bending 

The lens equation 1/f = 1/ + 1/ is applicable (A) When the thickness of the lens is small (B) Only to conjugate distances along the principal axis (C) The computed quantities are accurate enough for geometrical optics of simple distances (D) All the above

Description : The lens equation 1/f = 1/ + 1/ is applicable (A) When the thickness of the lens is small (B) Only to conjugate distances along the principal axis (C) The computed quantities are accurate enough for geometrical optics of simple distances (D) All the above

Last Answer : (D) All the above

Along the neutral axis of a simply supported beam (A) Fibres do not undergo strain (B) Fibres undergo minimum strain (C) Fibres undergo maximum strain (D) None of these

Description : Along the neutral axis of a simply supported beam  (A) Fibres do not undergo strain  (B) Fibres undergo minimum strain  (C) Fibres undergo maximum strain  (D) None of these

Last Answer : (A) Fibres do not undergo strain 

In a solid arch, shear force acts (A) Vertically upwards (B) Along the axis of the arch (C) Perpendicular to the axis of arch (D) Tangentially to the arch

Description : In a solid arch, shear force acts (A) Vertically upwards (B) Along the axis of the arch (C) Perpendicular to the axis of arch (D) Tangentially to the arch

Last Answer : (C) Perpendicular to the axis of arch

A streamline is defined as the line (A) Parallel to central axis flow (B) Parallel to outer surface of pipe (C) Of equal velocity in a flow (D) Along which the pressure drop is uniform

Description : A streamline is defined as the line (A) Parallel to central axis flow (B) Parallel to outer surface of pipe (C) Of equal velocity in a flow (D) Along which the pressure drop is uniform

Last Answer : Answer: Option C