Write any two precautions while performing the pH experiment?

Write any two precautions while performing the pH experiment?
by

1 Answer

Answer :

Answer. Wash the dropper with water after each use or use new dropper for different samples. Keep the pH paper away from chemicals while doing the experiment.
by

Related questions

Mention any four precautions while doing an experiment to verify Ohm’s law?

Description : Mention any four precautions while doing an experiment to verify Ohm’s law?

Last Answer : Answer. All connections should be kept tight. The zero error in the ammeter and voltmeter should be noted down and taken into consideration while reading the measurement. The bare ends of the ... current through the circuit should be kept as low as possible otherwise heating of the resistor occurs.

While performing an experiment to study the dependence of current on the potential difference across two ends of the resistor, a student keeps the circuit closed for a long time to measure the current and potential difference. State how the resistance of the resistor will be affected?

Description : While performing an experiment to study the dependence of current on the potential difference across two ends of the resistor, a student keeps the circuit closed for a long time to measure the current and potential difference. State how the resistance of the resistor will be affected?

Last Answer : Answer. When the circuit is closed for a long time, the flow of current will be in excess which causes unwanted heating in the resistor and changes the value of resistance.

A glass tube of smaller diameter is used while performing an experiment for the capillary rise of water because (A) It is easier to see through the glass tube (B) Glass tube is cheaper than a metallic tube (C) It is not possible to conduct this experiment with any other tube (D) All of the above

Description : A glass tube of smaller diameter is used while performing an experiment for the capillary rise of water because (A) It is easier to see through the glass tube (B) Glass tube is cheaper than a metallic ... (C) It is not possible to conduct this experiment with any other tube (D) All of the above

Last Answer : Answer: Option A

A student is to conduct an experiment to show CO2 is released during respiration. List two precautions that he/she must take for obtaining correct observation. -Science

Description : A student is to conduct an experiment to show CO2 is released during respiration. List two precautions that he/she must take for obtaining correct observation. -Science

Last Answer : Two precautions to be taken are: (i) Germinating seeds (living) should be used. (ii) The experiment set up must be air-tight.

A student is to conduct an experiment to show CO2 is released during respiration. List two precautions that he/she must take for obtaining correct observation.

Description : A student is to conduct an experiment to show CO2 is released during respiration. List two precautions that he/she must take for obtaining correct observation.

Last Answer : Answer. Two precautions to be taken are: (i) Germinating seeds (living) should be used. (ii) The experiment set up must be air-tight.

What are the two precautions taken to ensure accurate results in simple pendulum experiment?

Description : What are the two precautions taken to ensure accurate results in simple pendulum experiment?

Last Answer : Make sure Error due to parallax is avoided

how,he speed of sound is about 3.4 × 102 meters per second. Mark is performing a science experiment and he needs to know how far sound travels in 3 × 1010 seconds. If Mark uses a calculator to solve this problem, how will the calculator show the answer?

Description : how,he speed of sound is about 3.4 × 102 meters per second. Mark is performing a science experiment and he needs to know how far sound travels in 3 × 1010 seconds. If Mark uses a calculator to solve this problem, how will the calculator show the answer?

Last Answer : 10200000000000

How do scientists ensure the validity of their conclusions when performing an experiment?

Description : How do scientists ensure the validity of their conclusions when performing an experiment?

Last Answer : What is the answer ?

The need of objective observation is Options: A) In performing experiment B) In research C) In normal behaviour D) In all the situations

Description : The need of objective observation is Options: A) In performing experiment B) In research C) In normal behaviour D) In all the situations

Last Answer : D) In all the situations

Write two precautions to be taken while identifying different parts of an embryo of a dicot seed. -Science

Description : Write two precautions to be taken while identifying different parts of an embryo of a dicot seed. -Science

Last Answer : (i) The slide should be properly focused. (ii) Slide should be observed first under low-power magnification and then under high-power magnification of the compound microscope.

Write two precautions to be taken while identifying different parts of an embryo of a dicot seed.

Description : Write two precautions to be taken while identifying different parts of an embryo of a dicot seed.

Last Answer : Answer. (i) The slide should be properly focused. (ii) Slide should be observed first under low-power magnification and then under high-power magnification of the compound microscope.

Write two precautions that must be taken while studying the decomposition reaction, when the ferrous sulphate crystals are heated in a boiling tube?

Description : Write two precautions that must be taken while studying the decomposition reaction, when the ferrous sulphate crystals are heated in a boiling tube?

Last Answer : Answer. Keep your nose away from the gas like SO2 which is suffocative. Use tube holder to heat the test tube.

Write any two precautions to be taken while using planimeter.

Description : Write any two precautions to be taken while using planimeter. 

Last Answer : 1. Set the anchor point inside or outside the figure depending on size of figure. If the area is very large ,it can be divided into number of sections. 2. The value of C ( ... moved preciously over the boundary of figure. 3. Operating manual shall be referred before operating different functions

Write three precautions to be observed while using a clinical thermometer. -Science-7

Description : Write three precautions to be observed while using a clinical thermometer. -Science-7

Last Answer : Do not wash the thermometer with hot water. Ensure that before use the mercury level is below 35 ∘C. Read the thermometer keeping the level of mercury along the line of sight. Handle the thermometer with care, as you handle any glass articles.

Write the precautions to be taken while placing the material in hot air oven

Description : Write the precautions to be taken while placing the material in hot air oven

Last Answer : 1. It should be filled to its capacity only should not be overloaded. 2. Glass apparatus and equipment should be wrapped individually. 3. Articles should be placed in such a way that ... Proper biological indicators should be used 7. Thermolabile substance should not be sterilized in hot air oven

How can pH affect catalase activity Design an experiment to test your hypothesis. Ask your teacher for comments on your design. If necessary revise the procedure. Carry out your experiment and be sure?

Description : How can pH affect catalase activity Design an experiment to test your hypothesis. Ask your teacher for comments on your design. If necessary revise the procedure. Carry out your experiment and be sure?

Last Answer : Need answer

9. What are antibiotics? What precautions must be taken while taking antibiotics? -Science

Description : 9. What are antibiotics? What precautions must be taken while taking antibiotics? -Science

Last Answer : Chemical agents that kill or stop the growth of disease-causing microorganisms are called antibiotics. Antibiotics should be taken only on the advice of a qualified doctor. Also, one must complete the course prescribed by the doctor.

State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) Minimum clearance between cable and water pipe line when running in parallel. (iii) If cable is laid through pipe what should be diameter of pipe. (iv) When more than one cable is to be laid in the same trench, what should be minimum spacing between two cables ?

Description : State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) ... is to be laid in the same trench, what should be minimum spacing between two cables ?  

Last Answer : (i) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr. (ii) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr ... should be minimum spacing between two cables :- Then minimum 30 cm spacing is provided between 2 cables 

What precautions do you suggest for a consumer to take while purchasing medicines from the market ? -SST 10th

Description : What precautions do you suggest for a consumer to take while purchasing medicines from the market ? -SST 10th

Last Answer : While buying / purchasing medicine the following precautions should be taken : (i) Price, batch no., date of manufacture. (ii) Address of the manufacturing company. (iii) Expiry date. (iv ... proper use. (v) Information relating to side effects and risk associated with usage of that medicine.

What are antibiotics? What precautions must be taken while taking antibiotics? -Biology

Description : What are antibiotics? What precautions must be taken while taking antibiotics? -Biology

Last Answer : Antibiotics are the medicines which kill or stop the growth of the disease-causing microbes. They are manufactured by growing specific microorganisms. They are used to cure a variety of diseases. It ... . Antibiotics are, however, not effective against cold and flu as they are caused by viruses.

To avoid problems while working on the Internet, you should follow these precautions. -Technology

Description : To avoid problems while working on the Internet, you should follow these precautions. -Technology

Last Answer : (d) All of the above

What are the precautions to be taken while using coolant ?

Description : What are the precautions to be taken while using coolant ?

Last Answer : : ( 1) The oil water ratio of soluble oil cutting fluid has to be checked from time to time and when water evaporates, the amount of water decreases. In such cases, the ratio of coolant ... job-material. (5) Cutting fluids used for ferrous metals should not be used in nonferrous metal machining.

What are the precautions to be taken while entering the main road from the side road ?

Last Answer : : Before entering the main road from the side road or small road, it is necessary to reduce the speed of the vehicle , stop it if necessary , and make arrangements to allow the vehicle on the main ... to enter the main road as soon as possible by observing the movement of vehicles on the main road.

What are the precautions to be taken while driving in the rain ?

Last Answer : Brakes work less as the road is slippery during rains. For this reason, as an extra precaution, you should drive at a slower speed (half the normal speed) , so that the brakes can be applied and ... at a slow speed so that the car can be stopped or controlled very easily by applying the brakes .

Precautions to be taken while using cooking gas cylinders?

Description : Precautions to be taken while using cooking gas cylinders?

Last Answer : • Never leave cooking unattended • Never get distracted • Never allowed a child to cook without adult supervision • Keep the flame from extending past the pot ideas • Turn pot handles away from the stove edge • Keep stoves and cook tops free of grease and fat build-up

What are the precautions to be taken while writing a film?

Description : What are the precautions to be taken while writing a film?

Last Answer : What are the precautions to be taken while writing a film?

Justify the following statement: The secretary should observe certain precautions while corresponding with the Banks.

Description : Justify the following statement: The secretary should observe certain precautions while corresponding with the Banks.

Last Answer : Justify the following statement: The secretary should observe certain precautions while corresponding with the Banks.

Justify the following statement: The Secretary should take certain precautions while corresponding with Directors.

Description : Justify the following statement: The Secretary should take certain precautions while corresponding with Directors.

Last Answer : Justify the following statement: The Secretary should take certain precautions while corresponding with Directors.

What precautions will you take while doing the study of different parts of an embryo of a dicot seed?

Description : What precautions will you take while doing the study of different parts of an embryo of a dicot seed?

Last Answer : What precautions will you take while doing the study of different parts of an embryo of a dicot seed?

What are the precautions to be taken while terminating the bushings?

Description : What are the precautions to be taken while terminating the bushings?

Last Answer : Contact surfaces with intermediate plates, Mating surfaces should be identical. 

What precautions should be taken while meggering main generator?

Description : What precautions should be taken while meggering main generator?

Last Answer : All PT’s are racked out. Earthing transformer grounding terminals disconnected. Barring gear shall be kept off. Stator water shall be drained fully and hot air blown through conductors. Generator flexible lines shall be disconnected to isolate GT/UT. 

What are the precautions to be taken while working at SPPT?

Description : What are the precautions to be taken while working at SPPT?

Last Answer : PT trolley should be isolated very carefully so as to isolate secondary terminals first and primary (HT) terminals next. When primary isolated the arrangement in the trolley make ground connection and HT ... side of the fuse to replace the fuse. Because PT may be energised through secondary side. 

What are precautions to be taken while doing maintenance or repair work on power cables?

Description : What are precautions to be taken while doing maintenance or repair work on power cables?  

Last Answer : A research organised by EPRI (electric power research institute) on medium voltage XLPE cables found that DC high potential at 80% of the factory value a. Subsequently reduces the life of ... of cramped conductor strands is achieved otherwise it will add resistance and create over heating. 

What precautions should be taken while working in high tritium areas?

Description : What precautions should be taken while working in high tritium areas?

Last Answer : Use respirators, plastic suits, VP suits if concentration of tritium is very high. Avoid getting hurt while working because tritium may go through the skin by sweat to the blood. If by chance there is tritium intake in the body drink lots of fluids. 

List the precautions to be taken while using hot air oven.

Description : List the precautions to be taken while using hot air oven.

Last Answer : 1. Glass apparatus and equipment should be wrapped individually. 2. Articles should be placed in such away that they should not interfere with air flow 3. Once in operation oven should not be open ... substance should never be sterilized in hot air oven. 6. It should never be over loaded.

Mention precautions to be taken while using of eye drop.

Description : Mention precautions to be taken while using of eye drop. 

Last Answer : Do not touch the tip of the dropper. Never rinse the dropper. Never use eye drop that have changed colour. After instillation of drop, do not close eyes tightly or blink more than usual. Discard the content after one month of use.  

State any four precautions to be taken while plastering.

Description : State any four precautions to be taken while plastering.

Last Answer : i. Before application of the plastering, the surface must be clean and free of dirt, oil, or other elements which may interfere with bonding. ii. Smooth or non-absorbent surfaces should be prepared. iii. ... or vertical line at the end of the day or if work requires to be suspended for any reason.

State any four precautions to be taken while marking layout on ground.

Description : State any four precautions to be taken while marking layout on ground.

Last Answer : The necessary precaution to be taken while marking layout on ground are as follows 1. All vertical wooden post should be firmly fixed into the ground with concrete and curing should be done to the ... the face line or center line correctly. 19. Use proper or correct plumb bob for centering. 

State any four precautions to be taken while using an Ammeter and Voltmeter.

Description : State any four precautions to be taken while using an Ammeter and Voltmeter. 

Last Answer : Precautions to be taken while using Ammeters: Ammeters are to be connected in series of circuits. 1. While connecting ammeters across emf source always a series resistance should be used. This ... first &then range should be decreased. 4. Loading effect can be minimized by using high sensitivity

State any four precautions to be taken while selecting stations for chain surveying.

Description : State any four precautions to be taken while selecting stations for chain surveying.

Last Answer : Following are the precautions to be taken while selecting station for chain surveying. 1) As far as possible the survey work should be based upon the basic principle of surveying i.e. working from whole to ... level ground. 9) The survey lines should run as far as possible nearer to object.

State any eight safety precautions to be followed while working with an electric installation.

Description : State any eight safety precautions to be followed while working with an electric installation. 

Last Answer : Wear safety boot and use right tool for the right job

Mention the precautions to be taken while connecting CT and PT in the circuit.

Description : Mention the precautions to be taken while connecting CT and PT in the circuit. 

Last Answer : Precautions to be taken while using instrument transformers: 1. Secondary of CT is never kept open circuited when it is energized. 2. Secondary of PT is never kept short circuited when it ... of the instrument transformers unless they are properly grounded. 8. Never connect to DC circuits.

List out the precautions to be taken while charging of lead- acid battery

Description : List out the precautions to be taken while charging of lead- acid battery 

Last Answer : precautions to be taken while charging of lead- acid battery: 1) Never keep the battery in the circuit and connect for external charging if it is not designed so. 2) While disconnecting / removing a ... tools etc on batteries. 10) Do not splash any liquids on the batteries, near the charger etc.

Write any two precautions to study the reaction between Zn and HCl?

Description : Write any two precautions to study the reaction between Zn and HCl?

Last Answer : Answer. Acids should be handled carefully. Hydrogen gas evolved is highly inflammable, so it should be handled carefully.

Write two effects and two precautions of cold weather and hot weather concreting.

Description : Write two effects and two precautions of cold weather and hot weather concreting.

Last Answer : Effects of cold weather concreting: 1. Due to cold weather, concrete shows reduced rate of hardening, which results delay in removal of formwork. 2. Water added in concrete mix gets frozen quickly, ... heat evolution. 7. High w/c ratio and ice crystals should be used to maintain workability.

The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation? a.N010 GO2 X10 Y10 X5 Y5 R5 b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Description : The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the ... b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Last Answer : a.N010 GO2 X10 Y10 X5 Y5 R5

What do you understand by merge field while performing Mail Merge? -Technology

Description : What do you understand by merge field while performing Mail Merge? -Technology

Last Answer : Merge field is a placeholder that you insert in the main document, e.g. insert the merge field insert a city name, such as “Paris” that is stored in the city data field.

While performing Mail Merge, in how many ways can you select recipients? Explain any one of them. -Technology

Description : While performing Mail Merge, in how many ways can you select recipients? Explain any one of them. -Technology

Last Answer : When you open or create a data source by using the Mail Merge wizard, you are telling Word to use a specific set of variable information for your merge. Use one of the following methods to attach ... this point, you are also saving the data source and attaching the data source to the main document.