Mention precautions to be taken while using of eye drop.

Mention precautions to be taken while using of eye drop. 
by

1 Answer

Answer :

Do not touch the tip of the dropper.

 Never rinse the dropper.

 Never use eye drop that have changed colour.

 After instillation of drop, do not close eyes tightly or blink more than usual.

 Discard the content after one month of use.

 
by

Related questions

List the precautions to be taken while using hot air oven.

Description : List the precautions to be taken while using hot air oven.

Last Answer : 1. Glass apparatus and equipment should be wrapped individually. 2. Articles should be placed in such away that they should not interfere with air flow 3. Once in operation oven should not be open ... substance should never be sterilized in hot air oven. 6. It should never be over loaded.

Write the precautions to be taken while placing the material in hot air oven

Description : Write the precautions to be taken while placing the material in hot air oven

Last Answer : 1. It should be filled to its capacity only should not be overloaded. 2. Glass apparatus and equipment should be wrapped individually. 3. Articles should be placed in such a way that ... Proper biological indicators should be used 7. Thermolabile substance should not be sterilized in hot air oven

Give any four precautions to be taken during aseptic work.

Description : Give any four precautions to be taken during aseptic work.

Last Answer : i. Self hygiene: avoid coughing, sneezing.  ii. Avoid contamination of products.  iii. Cover the whole body by Wear complete body suit up to foot.  iv. Wear hand gloves.  v. Allow minimum persons to work in aseptic area.  vi. Don’t touch unnecessarily.

Mention the precautions to be taken while connecting CT and PT in the circuit.

Description : Mention the precautions to be taken while connecting CT and PT in the circuit. 

Last Answer : Precautions to be taken while using instrument transformers: 1. Secondary of CT is never kept open circuited when it is energized. 2. Secondary of PT is never kept short circuited when it ... of the instrument transformers unless they are properly grounded. 8. Never connect to DC circuits.

Mention official and unofficial evaluation test for tablets. Describe weight variation test.

Description : Mention official and unofficial evaluation test for tablets. Describe weight variation test. 

Last Answer : Official test list: 1. Size and shape of tablet. 2. Appearance. 3. Content of active ingredient. 4. Uniformity of weight/weight variation test 5. Uniformity of content 6. ... the percentage deviation given in the table and none should deviate by more than twice that percentage.

Mention the application of liposomes in pharmacy.

Description : Mention the application of liposomes in pharmacy.

Last Answer : i)Used in disease caused by intracellular parasites e.g. malaria, tuberculosis and amoebiasis. ii)Liposomes entrapped insulin active orally and can be replaced by intramuscular administration if ... vi)Liposome entrapped actinomycin-D and nitrogen mustard are more effective than parent drug.

Draw a well labelled diagram of ‘Soxhlet apparatus.’ Mention the various limitations of continuous hot percolation process.

Description : Draw a well labelled diagram of ‘Soxhlet apparatus.’ Mention the various limitations of continuous hot percolation process. 

Last Answer : Limitation: 1. Physical character of the drug: If the drug would block the soxhlet apparatus then this process cannot be used for extraction. Eg opium. Gum, resin, ... for drugs having thermolabile active constituents such as enzymes, alkaloids, anthraquinone derivatives, esters, etc. 

Draw a labelled diagram of apparatus used for continuous hot extraction process. Mention limitations of the process.

Description : Draw a labelled diagram of apparatus used for continuous hot extraction process. Mention limitations of the process.

Last Answer : Diagram: Limitations: process cannot be used in following conditions.  Physical character of the drug: Drugs which may block the apparatus such as opium, gums, resins, etc cannot ... process. Chemical constituents: Unsuitable for thermolabile drugs, such as enzymes, alkaloids, etc

Mention all Q.C. tests to be performed on tablets. Explain any one in detail.

Description : Mention all Q.C. tests to be performed on tablets. Explain any one in detail. 

Last Answer : Q.C. Tests:  1. Size and shape of tablet. 2. Appearance. 3. Content of active ingredient. 4. Uniformity of weight/weight variation test 5. Uniformity of content 6. Disintegration. 7. ... are considered to be of good quality if the loss in weight is less than 1%.  Diagram:

Mention different types of closures. Comment on materials used for making closures.

Description : Mention different types of closures. Comment on materials used for making closures.

Last Answer : Types of closures with examples:  1. Plug type. 2. Crown cap. 3. Push-fit cap. 4. Screw closures. Materials used in pharmaceutical closures:   1) Rubber Cork is obtained ... the construction of closure meant for vials, transfusion fluid bottles. Rubber, two types natural or synthetic, 

Mention different methods of size separation and explain any one.

Description : Mention different methods of size separation and explain any one.

Last Answer : Different methods of size separation are: 1. Sieving 2. Cyclone separator. 3. Air separator. 4. Elutriation. SIEVING: Diagram: Construction: In this method fine ... Elutriating tank is used to separate the coarse and fine particles of powder after levigation Diagram:

Mention advantages and disadvantages of plastic containers.

Description : Mention advantages and disadvantages of plastic containers.

Last Answer : Advantages:   1. Light in weight and can be handled easily. 2. Poor conductor of heat. 3. Sufficient mechanical strength. 4. Transported easily. 5. Unbreakable. 6. Available in various ... as preservatives. 5. Relatively expensive. 6. Special type of gum or adhesive required for labelling.

Mention different mechanisms for size reduction.

Description : Mention different mechanisms for size reduction.

Last Answer : i. Cutting ii. Compression iii. Impact iv. Attrition v. Combined impact and attrition 

What are the precautions taken during storage of eye drops

Description : What are the precautions taken during storage of eye drops

Last Answer : Following precautions taken during storage of eye drops: i. If the dropper is separate, always hold it with its tip down. ii. Never touch the surface of dropper iii. Never rinse the dropper iv. Never ... color v. When the dropper is at the top of the bottle, avoid contaminating the cap when removed

What are the precautions to be taken while using coolant ?

Description : What are the precautions to be taken while using coolant ?

Last Answer : : ( 1) The oil water ratio of soluble oil cutting fluid has to be checked from time to time and when water evaporates, the amount of water decreases. In such cases, the ratio of coolant ... job-material. (5) Cutting fluids used for ferrous metals should not be used in nonferrous metal machining.

Precautions to be taken while using cooking gas cylinders?

Description : Precautions to be taken while using cooking gas cylinders?

Last Answer : • Never leave cooking unattended • Never get distracted • Never allowed a child to cook without adult supervision • Keep the flame from extending past the pot ideas • Turn pot handles away from the stove edge • Keep stoves and cook tops free of grease and fat build-up

Write any two precautions to be taken while using planimeter.

Description : Write any two precautions to be taken while using planimeter. 

Last Answer : 1. Set the anchor point inside or outside the figure depending on size of figure. If the area is very large ,it can be divided into number of sections. 2. The value of C ( ... moved preciously over the boundary of figure. 3. Operating manual shall be referred before operating different functions

State any four precautions to be taken while using an Ammeter and Voltmeter.

Description : State any four precautions to be taken while using an Ammeter and Voltmeter. 

Last Answer : Precautions to be taken while using Ammeters: Ammeters are to be connected in series of circuits. 1. While connecting ammeters across emf source always a series resistance should be used. This ... first &then range should be decreased. 4. Loading effect can be minimized by using high sensitivity

Explain the term aseptic techniques. What are the various points to be considered while designing an aseptic room?

Description : Explain the term aseptic techniques. What are the various points to be considered while designing an aseptic room?

Last Answer : Definition: The method which is used to prevent the access of microorganism during the preparation of parenteral product and their testing are called aseptic Technique . Design of aseptic room: 1. Site: ... connection. Vacuum. Disposable waste. 6. Furniture: Shack type. Fume -cupboard.

Mention any four precautions while doing an experiment to verify Ohm’s law?

Description : Mention any four precautions while doing an experiment to verify Ohm’s law?

Last Answer : Answer. All connections should be kept tight. The zero error in the ammeter and voltmeter should be noted down and taken into consideration while reading the measurement. The bare ends of the ... current through the circuit should be kept as low as possible otherwise heating of the resistor occurs.

Give the method of preparation of “Small pox vaccine” using egg.

Description : Give the method of preparation of “Small pox vaccine” using egg.

Last Answer : Small pox vaccine is prepared by two methods 1) By using animals 2) By using Eggs By using eggs:   Hen egg is used (Which is incubated after 12 days) ↓ Small cut on ... ↓ Material is ground to produce homogenized suspension. ↓ Transfer to suitable sterile container and freeze dried

Discuss in brief gaseous sterilization using ethylene oxide.

Description : Discuss in brief gaseous sterilization using ethylene oxide. 

Last Answer : Gaseous sterilization using Ethylene oxide:  It is gas at room temperature, highly inflammable & forms explosive mixture with air. This disadvantage can be overcome by using mixture of 10% ethylene ... toxic & inflammable gas. Sophisticated instruments are required & skilled persons are needed.

Give principle, method and application of sterilization using UV radiation.

Description : Give principle, method and application of sterilization using UV radiation.

Last Answer : Principle:   Direct sunlight can destroy the microorganism on account of its ultra-violet rays of longer wave length. UV light of shorter wavelength kills or inactivates microorganisms by ... . Sterilization of thermolabile material. Sterilization of surface of working table.

Give the significance of sterilization using bactericidal solution, explain the method and name the bactericidal agents.

Description : Give the significance of sterilization using bactericidal solution, explain the method and name the bactericidal agents.

Last Answer : Significance: The lethal effect of bactericide increases with the rise of temperature. This method is used for sterilizing aqueous preparation, which is unstable at the higher temperature, hence moist heat ... minutes in boiling water. IP 1985 permitted the use of following bactericides

Define the term vaccine. Discuss the method of preparation of small pox vaccine using animals

Description : Define the term vaccine. Discuss the method of preparation of small pox vaccine using animals

Last Answer : Definition:   Vaccines are antigenic preparations which stimulate antibody formation and producing immunity. Small pox vaccine is prepared by two methods 1) By using animals 2) By using Eggs ... Filling sealing and storage: filled in final container under aseptic condition and freeze drying. 

9. What are antibiotics? What precautions must be taken while taking antibiotics? -Science

Description : 9. What are antibiotics? What precautions must be taken while taking antibiotics? -Science

Last Answer : Chemical agents that kill or stop the growth of disease-causing microorganisms are called antibiotics. Antibiotics should be taken only on the advice of a qualified doctor. Also, one must complete the course prescribed by the doctor.

What are antibiotics? What precautions must be taken while taking antibiotics? -Biology

Description : What are antibiotics? What precautions must be taken while taking antibiotics? -Biology

Last Answer : Antibiotics are the medicines which kill or stop the growth of the disease-causing microbes. They are manufactured by growing specific microorganisms. They are used to cure a variety of diseases. It ... . Antibiotics are, however, not effective against cold and flu as they are caused by viruses.

Write two precautions to be taken while identifying different parts of an embryo of a dicot seed. -Science

Description : Write two precautions to be taken while identifying different parts of an embryo of a dicot seed. -Science

Last Answer : (i) The slide should be properly focused. (ii) Slide should be observed first under low-power magnification and then under high-power magnification of the compound microscope.

What are the precautions to be taken while entering the main road from the side road ?

Last Answer : : Before entering the main road from the side road or small road, it is necessary to reduce the speed of the vehicle , stop it if necessary , and make arrangements to allow the vehicle on the main ... to enter the main road as soon as possible by observing the movement of vehicles on the main road.

What are the precautions to be taken while driving in the rain ?

Last Answer : Brakes work less as the road is slippery during rains. For this reason, as an extra precaution, you should drive at a slower speed (half the normal speed) , so that the brakes can be applied and ... at a slow speed so that the car can be stopped or controlled very easily by applying the brakes .

What are the precautions to be taken while writing a film?

Description : What are the precautions to be taken while writing a film?

Last Answer : What are the precautions to be taken while writing a film?

What are the precautions to be taken while terminating the bushings?

Description : What are the precautions to be taken while terminating the bushings?

Last Answer : Contact surfaces with intermediate plates, Mating surfaces should be identical. 

What precautions should be taken while meggering main generator?

Description : What precautions should be taken while meggering main generator?

Last Answer : All PT’s are racked out. Earthing transformer grounding terminals disconnected. Barring gear shall be kept off. Stator water shall be drained fully and hot air blown through conductors. Generator flexible lines shall be disconnected to isolate GT/UT. 

What are the precautions to be taken while working at SPPT?

Description : What are the precautions to be taken while working at SPPT?

Last Answer : PT trolley should be isolated very carefully so as to isolate secondary terminals first and primary (HT) terminals next. When primary isolated the arrangement in the trolley make ground connection and HT ... side of the fuse to replace the fuse. Because PT may be energised through secondary side. 

What are precautions to be taken while doing maintenance or repair work on power cables?

Description : What are precautions to be taken while doing maintenance or repair work on power cables?  

Last Answer : A research organised by EPRI (electric power research institute) on medium voltage XLPE cables found that DC high potential at 80% of the factory value a. Subsequently reduces the life of ... of cramped conductor strands is achieved otherwise it will add resistance and create over heating. 

What precautions should be taken while working in high tritium areas?

Description : What precautions should be taken while working in high tritium areas?

Last Answer : Use respirators, plastic suits, VP suits if concentration of tritium is very high. Avoid getting hurt while working because tritium may go through the skin by sweat to the blood. If by chance there is tritium intake in the body drink lots of fluids. 

Write two precautions to be taken while identifying different parts of an embryo of a dicot seed.

Description : Write two precautions to be taken while identifying different parts of an embryo of a dicot seed.

Last Answer : Answer. (i) The slide should be properly focused. (ii) Slide should be observed first under low-power magnification and then under high-power magnification of the compound microscope.

Write two precautions that must be taken while studying the decomposition reaction, when the ferrous sulphate crystals are heated in a boiling tube?

Description : Write two precautions that must be taken while studying the decomposition reaction, when the ferrous sulphate crystals are heated in a boiling tube?

Last Answer : Answer. Keep your nose away from the gas like SO2 which is suffocative. Use tube holder to heat the test tube.

State any four precautions to be taken while plastering.

Description : State any four precautions to be taken while plastering.

Last Answer : i. Before application of the plastering, the surface must be clean and free of dirt, oil, or other elements which may interfere with bonding. ii. Smooth or non-absorbent surfaces should be prepared. iii. ... or vertical line at the end of the day or if work requires to be suspended for any reason.

State any four precautions to be taken while marking layout on ground.

Description : State any four precautions to be taken while marking layout on ground.

Last Answer : The necessary precaution to be taken while marking layout on ground are as follows 1. All vertical wooden post should be firmly fixed into the ground with concrete and curing should be done to the ... the face line or center line correctly. 19. Use proper or correct plumb bob for centering. 

State any four precautions to be taken while selecting stations for chain surveying.

Description : State any four precautions to be taken while selecting stations for chain surveying.

Last Answer : Following are the precautions to be taken while selecting station for chain surveying. 1) As far as possible the survey work should be based upon the basic principle of surveying i.e. working from whole to ... level ground. 9) The survey lines should run as far as possible nearer to object.

List out the precautions to be taken while charging of lead- acid battery

Description : List out the precautions to be taken while charging of lead- acid battery 

Last Answer : precautions to be taken while charging of lead- acid battery: 1) Never keep the battery in the circuit and connect for external charging if it is not designed so. 2) While disconnecting / removing a ... tools etc on batteries. 10) Do not splash any liquids on the batteries, near the charger etc.

Explain principle and working of fluid energy mill with a diagram.

Description : Explain principle and working of fluid energy mill with a diagram.

Last Answer : Principle  It works on the principle of impact and attrition. Working: The air or inert gas is introduced with a very high pressure through nozzles. Solids are introduced into air stream through inlet. ... 100 mesh and then passed through fluid energy mill. Diagram of fluid energy mill :

Give application of simple distillation. What is the principle of fractional distillation?

Description : Give application of simple distillation. What is the principle of fractional distillation?

Last Answer : Applications of simple distillation:  i. It is used for the preparation of distilled water and water for injection. ii. Preparation of many volatile oils and aromatic water. iii. Purification ... becomes richer with the liquid having the lower boiling point which gets condensed in a condenser. 

Draw a well labelled diagram of aerosol container and give its advantages and disadvantages.

Description : Draw a well labelled diagram of aerosol container and give its advantages and disadvantages.

Last Answer : Diagram of aerosol container Advantages:   1. Medicament can be delivered directly to affected areas. 2. Absence of air prevents oxidation. 3. Hydrolysis of medicament prevented ... on injured skin. 4. Difficulties occurred during formulation when drug not soluble in propellants.

Discuss working of ball mill with neat diagram.

Description : Discuss working of ball mill with neat diagram. 

Last Answer : Working: The drug to be ground is put into the cylinder of the mill and is rotated. The speed of the rotation is very different. At low speed, the mass of balls will slide or roll over each other and ... and passed through a sieve to get powder of the required size. Ball mill diagram:   

Define pharmaceutical container. Give qualities of an ideal container.

Description : Define pharmaceutical container. Give qualities of an ideal container.

Last Answer : Definition: Pharmaceutical container  A device that holds the drug and it may or may not be in direct contact with the pharmaceutical dosage form or preparations. Qualities of an ideal container:  1 ... and temperature. 7. Labelled easily 8. Non-toxic. 9. Closure easily removable/replaceable.

Write the official standards of powder.

Description : Write the official standards of powder.

Last Answer : i. Coarse powder: A powder of which all particles pass through sieve no 10 with nominal aperture size 1.7mm and not more than 40% pass through sieve no 44 with nominal aperture size 355um.  ii. ... powder: A powder of which all particles pass through sieve no 120 with nominal aperture size 125 um.

Write special application of capsule.

Description : Write special application of capsule. 

Last Answer : Applications of capsule:  1. Enteric coated capsule: These capsules do not disintegrate in stomach (Acidic Medium) but break up in intestine (Alkaline medium). On commercial scale, a coating ... gelatine commonly used Capsule punctured by using sterile needle and then instilled into the eye.