Write the precautions to be taken while placing the material in hot air oven

Write the precautions to be taken while placing the material in hot air oven
by

1 Answer

Answer :

1. It should be filled to its capacity only should not be overloaded.

2. Glass apparatus and equipment should be wrapped individually.

3. Articles should be placed in such a way that they should not interfere with air flow

4. Articles should not be placed at the floor of the oven.

5. Once in operation oven should not be open

6. Proper biological indicators should be used

7. Thermolabile substance should not be sterilized in hot air oven
by

Related questions

List the precautions to be taken while using hot air oven.

Description : List the precautions to be taken while using hot air oven.

Last Answer : 1. Glass apparatus and equipment should be wrapped individually. 2. Articles should be placed in such away that they should not interfere with air flow 3. Once in operation oven should not be open ... substance should never be sterilized in hot air oven. 6. It should never be over loaded.

Mention precautions to be taken while using of eye drop.

Description : Mention precautions to be taken while using of eye drop. 

Last Answer : Do not touch the tip of the dropper. Never rinse the dropper. Never use eye drop that have changed colour. After instillation of drop, do not close eyes tightly or blink more than usual. Discard the content after one month of use.  

Give any four precautions to be taken during aseptic work.

Description : Give any four precautions to be taken during aseptic work.

Last Answer : i. Self hygiene: avoid coughing, sneezing.  ii. Avoid contamination of products.  iii. Cover the whole body by Wear complete body suit up to foot.  iv. Wear hand gloves.  v. Allow minimum persons to work in aseptic area.  vi. Don’t touch unnecessarily.

Explain the method of hot percolation process with well labelled diagram and write its limitations.

Description : Explain the method of hot percolation process with well labelled diagram and write its limitations.

Last Answer : Diagram: Procedure :  1) The menstrum is placed in a round bottom flask. 2) The drug to be extracted is packed in a filter paper and placed in the body ... is unsuitable for drugs having thermolabile active constituents such as enzymes, alkaloids, anthraquinone derivatives, esters, etc.

Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Description : Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Last Answer : Economical. Available in variety of sizes and shapes.  Chemically inert, impermeable, strong and rigid. Does not deteriorate with age. Easy to label. Excellent barrier against light. ... easy to break. Heavy, Bulky to carry. Leaching and absorption of alkalis. Flak formation

Write advantages and disadvantages of plastic as a material for container and state its type.

Description : Write advantages and disadvantages of plastic as a material for container and state its type.

Last Answer : Advantages: 1. Light in weight and can be handled easily. 2. Poor conductor of heat. 3. Sufficient mechanical strength. 4. Transported easily. 5. Unbreakable. 6. Available in various shapes ... (PVC) Low-density polyethylene (LDPE) Polypropylene (PP) Polystyrene (PS) Polyester (PES) etc.

Write any three qualities of packaging material and any three disadvantages of glass as a material for packaging.

Description : Write any three qualities of packaging material and any three disadvantages of glass as a material for packaging. 

Last Answer : Qualities of packaging material i. Neutral ii. No interaction. iii. Stability against environmental factor. iv. Withstand wear and tear during handling. v. Withstand changes in pressure and ... aqueous preparations, 4) Flaking and weathering of glass are two serious issues related to glass.

Draw a well labelled diagram of ‘Soxhlet apparatus.’ Mention the various limitations of continuous hot percolation process.

Description : Draw a well labelled diagram of ‘Soxhlet apparatus.’ Mention the various limitations of continuous hot percolation process. 

Last Answer : Limitation: 1. Physical character of the drug: If the drug would block the soxhlet apparatus then this process cannot be used for extraction. Eg opium. Gum, resin, ... for drugs having thermolabile active constituents such as enzymes, alkaloids, anthraquinone derivatives, esters, etc. 

Draw a labelled diagram of apparatus used for continuous hot extraction process. Mention limitations of the process.

Description : Draw a labelled diagram of apparatus used for continuous hot extraction process. Mention limitations of the process.

Last Answer : Diagram: Limitations: process cannot be used in following conditions.  Physical character of the drug: Drugs which may block the apparatus such as opium, gums, resins, etc cannot ... process. Chemical constituents: Unsuitable for thermolabile drugs, such as enzymes, alkaloids, etc

Write two precautions to be taken while identifying different parts of an embryo of a dicot seed. -Science

Description : Write two precautions to be taken while identifying different parts of an embryo of a dicot seed. -Science

Last Answer : (i) The slide should be properly focused. (ii) Slide should be observed first under low-power magnification and then under high-power magnification of the compound microscope.

Write two precautions to be taken while identifying different parts of an embryo of a dicot seed.

Description : Write two precautions to be taken while identifying different parts of an embryo of a dicot seed.

Last Answer : Answer. (i) The slide should be properly focused. (ii) Slide should be observed first under low-power magnification and then under high-power magnification of the compound microscope.

Write two precautions that must be taken while studying the decomposition reaction, when the ferrous sulphate crystals are heated in a boiling tube?

Description : Write two precautions that must be taken while studying the decomposition reaction, when the ferrous sulphate crystals are heated in a boiling tube?

Last Answer : Answer. Keep your nose away from the gas like SO2 which is suffocative. Use tube holder to heat the test tube.

Write any two precautions to be taken while using planimeter.

Description : Write any two precautions to be taken while using planimeter. 

Last Answer : 1. Set the anchor point inside or outside the figure depending on size of figure. If the area is very large ,it can be divided into number of sections. 2. The value of C ( ... moved preciously over the boundary of figure. 3. Operating manual shall be referred before operating different functions

Give merits and demerits of rubber as a material for closure.

Description : Give merits and demerits of rubber as a material for closure.

Last Answer : Merits of rubber:  1) Soft in nature. 2) It is quite elastic therefore self sealing property 3) It withstands in the temperature & pressure of an autoclave therefore can be sterilised. ... agents, pigments, may get extracted into the product 4) Process cost is very high.

Give advantages and disadvantages of glass as a material used for pharmaceutical container and state its types.

Description : Give advantages and disadvantages of glass as a material used for pharmaceutical container and state its types.

Last Answer : Advantages:   Economical. Available in variety of sizes and shapes. Chemically inert, impermeable, strong and rigid. Does not deteriorate with age. Easy to label. Excellent barrier against light. ... -lime glass or Alkali glass (Type-III). 4. General Purpose soda-lime glass (Type-IV).

Explain the term aseptic techniques. What are the various points to be considered while designing an aseptic room?

Description : Explain the term aseptic techniques. What are the various points to be considered while designing an aseptic room?

Last Answer : Definition: The method which is used to prevent the access of microorganism during the preparation of parenteral product and their testing are called aseptic Technique . Design of aseptic room: 1. Site: ... connection. Vacuum. Disposable waste. 6. Furniture: Shack type. Fume -cupboard.

Write the official standards of powder.

Description : Write the official standards of powder.

Last Answer : i. Coarse powder: A powder of which all particles pass through sieve no 10 with nominal aperture size 1.7mm and not more than 40% pass through sieve no 44 with nominal aperture size 355um.  ii. ... powder: A powder of which all particles pass through sieve no 120 with nominal aperture size 125 um.

Write special application of capsule.

Description : Write special application of capsule. 

Last Answer : Applications of capsule:  1. Enteric coated capsule: These capsules do not disintegrate in stomach (Acidic Medium) but break up in intestine (Alkaline medium). On commercial scale, a coating ... gelatine commonly used Capsule punctured by using sterile needle and then instilled into the eye.

Write the working of filter press with well labelled diagram.

Description : Write the working of filter press with well labelled diagram.

Last Answer : Working:  1. The slurry is pumped in under positive pressure up to 20 bar and fill each frame. 2. The filtrate passes through the cloths on opposite sides of the frame and runs down between the ... 6. Thickness of cake can be varied by using frame of different thickness. Diagram: 

Write the main objectives of mixing.

Description : Write the main objectives of mixing.

Last Answer : Objectives of mixing:  i. To form uniform mixture.  ii. To promote chemical reaction.  iii. Dispersion of solid particles in liquid.  iv. Dispersion of two immiscible liquids.

Write reasons and remedies for “ Capping”

Description : Write reasons and remedies for “ Capping” 

Last Answer : Reasons:   Excessive fine. Defective punch and die. High speed of machine. Granules too dried. Remedies:  Setting the die and punch properly. Reduce % of fine. Punches ... Maintain the desire moisture in granules. Maintain the speed at optimum. Regulate the pressure of punches.

Define The term Clarification. Write the working of filter candle with neat diagram.

Description : Define The term Clarification. Write the working of filter candle with neat diagram.

Last Answer : Clarification:-  When solids are present in a very small proportion i.e. not exceeding 1.0 % the process of its separation from liquid, is called clarification. Working :-   1) These are ... the candle & gets collected inside the candle from where it is removed. Diagram :

Write short note on any one i. BCG Vaccine : ii. Silverson mixer homogenizer:

Description : Write short note on any one i. BCG Vaccine : ii. Silverson mixer homogenizer:

Last Answer : 1. BCG vaccine: It is freeze- dried preparation containing live culture of the bacillus Calmette and Guerin strain of Mycobacterium tuberculosis. Method of preparation : The bacilli are grown on a ... Use: Useful for the preparation of fine emulsion and suspension. Diagram:

Write the principle, construction, working and uses of the disintegrator.

Description : Write the principle, construction, working and uses of the disintegrator.

Last Answer : Principle: The Disintegrator works on the principle of impact.  Construction:  The Disintegrator consists of steel drum having a shaft in the centre. The shaft contains a disc, on which four beaters are ... Use:   This mill is used to powder all types of drugs including very hard drugs.

Define ‘Homogenisation’. Write the principle of homogenisation. Write in detail about ‘Colloidal Mill’.

Description : Define ‘Homogenisation’. Write the principle of homogenisation. Write in detail about ‘Colloidal Mill’.

Last Answer : Homogenization is the process of preparing fine emulsion from a coarse emulsion by converting the large globules in to small globules. Principle: These work on the principal of braking large ... thus reduced to fine particle size The material is thrown outward due to centrifugal action

Why plastic containers are more commonly used now a days? Write its demerits.

Description : Why plastic containers are more commonly used now a days? Write its demerits.

Last Answer : Plastic containers are more commonly used now a days for following advantages: 1.They are light in weight and can be handled easily 2.They are poor conductor of heat . 3.They have sufficient ... solution. 5.They are relatively expensive. 6.Special type of gum or adhesive required for labelling.

Write in brief about Mantous test.

Description : Write in brief about Mantous test.

Last Answer : A dose of 5 tuberculin units of old tuberculin or an equivalent dose of PPD is injected intradermally. After 48 to 72 hours the reaction of the test is observed at the site of the injection. ... than 5 mm is interpreted as a negative. The presence of erythema without induration is not significant.

Write in detail about moist heat method of sterilization

Description : Write in detail about moist heat method of sterilization

Last Answer : Principle: The steam has more penetration power than dry heat and thermal capacity of steam is more than thermal capacity of dry heat. The method is useful for killing of bacterial spores. ... for powder or oils. It is not suitable for sterilization of plastic which melt at 1150C.

Write the advantages & disadvantages of an evaporating pan

Description : Write the advantages & disadvantages of an evaporating pan

Last Answer : Advantages:   It is simple and cheap to construction.   Easy to clean and maintain.   Economical.  Disadvantages:   Poor coefficient of heat transfer.   Heating surface is ... concentration of thermolabile material.   Evaporating pan is open so vapour cause discomfort to the worker.

Write advantages and disadvantages of tablets.

Description : Write advantages and disadvantages of tablets.

Last Answer : Advantages of tablets: 1. Easy to administered. 2. Easy to dispense. 3. More stable. 4. Accuracy in dose. 5. Bitter and nauseous substance can be easily dispensed. 6. ... remove bitter and unpleasant taste. v) Swallowing is difficult especially for children and ill (unconscious) patients.

Write the applications of spray drier.

Description : Write the applications of spray drier.

Last Answer : Spray drier can be used for drying of: 1) Any substance in solution or suspension 2) Thermolabile substances, 3) Extracts, gelatin citric acid, 4) Soaps and detergents also can be dried using spray drier.

Write the importance of particle size reduction in pharmacy.

Description : Write the importance of particle size reduction in pharmacy.

Last Answer : Can be listed as follows: i) Increase the rate of solution. ii) Increase the rate of penetration of solvent. iii) It helps in uniform mixing of drugs. iv) It increases the rate of absorption. v) Smaller the particles slower the rate of sedimentation. Thus stable the suspension.

Define the term ‘Closures’. Write in detail about different types of closures commonly used in pharmaceutical industry.

Description : Define the term ‘Closures’. Write in detail about different types of closures commonly used in pharmaceutical industry.

Last Answer : CLOSURES are devices by means of which containers can be opened and closed. TYPES OF CLOSURES WITH EXAMPLES: 1. Plug type - It is a push-fit into the neck of the container. E.g. cork ... and paper impregnated with a suitable resin, wax or plastic. E.g. Caps of pharmaceutical liquid dosage forms.

Write the salient features of third edition of Indian Pharmacopoeia

Description : Write the salient features of third edition of Indian Pharmacopoeia

Last Answer : Salient Features III Edition 1985: i. New analytical techniques such as flame photometry, Flurometry, have been introduced as official method for certain chemical analysis. ii. Dissolution test has ... the new drug which came into use after the publication of first addendum to third edition.

Write importance of dosage form.

Description : Write importance of dosage form.

Last Answer : Transformation of drug into dosage forms is done for the following reasons: 1. To protect the drug substance from oxidation, hydrolysis and reduction. Eg. Coated tablets and sealed ampoules. ... . Many dosage forms can be easily identified from their distinct colour, shape or identifying markings.

What are different types of vaccines? Write method of preparation of small pox vaccine.

Description : What are different types of vaccines? Write method of preparation of small pox vaccine.

Last Answer : There are 4 main types of vaccines: Live-attenuated vaccines Inactivated vaccines Subunit, recombinant, polysaccharide, and conjugate vaccines Toxoid vaccines Small pox vaccine ... to produce homogenized suspension. ↓ Transfer to suitable sterile container and freeze dried

Write the advantages and disadvantages of fluidised bed dryer.

Description : Write the advantages and disadvantages of fluidised bed dryer. 

Last Answer : Advantages: i. It give high drying rate. ii. Suitable for thermolabile material. iii. Drying takes place of individual particles. iv. Temperature can be controlled. v. Prevent the ... : i. Turbulence produces cause attrition of particles. ii. Movement can generate electrical charges. 

Write the applications of drying.

Description : Write the applications of drying.

Last Answer : i. It is used in manufacturing of granules. ii. It reduces the bulk and weight of the material. iii. It helps in preservation of crude drug. iv. It helps in size reduction of crude drug. v. It is used in the drying of aluminium hydroxide. vi. It controls the moisture level in solids.

Write in detail about modified percolation process.

Description : Write in detail about modified percolation process. 

Last Answer : Modified Percolation: In percolation process for tinctures drug\ percolate (d/p) ratio is 1:4.The drug/percolate ratio is reduced to 1:3 by modifying percolation process. Thus saves lot of heat, ... evaporated and then mixed with main percolate.  Final volume is made by adding more menstrum. 

Write the qualities of an ideal filter aids. Give examples of filter aid.

Description : Write the qualities of an ideal filter aids. Give examples of filter aid.

Last Answer : Ideal qualities of filter aid: i. It should be remain suspended in the liquid. ii. It should be free from impurities. iii. It should be inert. iv. It should have a particle size distribution ... ii. Cellulose. iii. Carbon. iv. Diatomaceous earth (silica). v.Perlite. vi.Activated Charcoal

Define ‘Viscosity’. Write the applications in Pharmacy.

Description : Define ‘Viscosity’. Write the applications in Pharmacy.

Last Answer : Defination of Viscosity: It is the property of liquid to resistance to flow. Applications of Viscosity in Pharmacy: i.Viscosity plays an important role in the stability of emulsions ... certain liquid preparations is increased in order to improve pourability or to make preparation more palatable.

Write the advantages of microencapsulation and list different methods of microencapsulation.

Description : Write the advantages of microencapsulation and list different methods of microencapsulation.

Last Answer : Advantages of microencapsulation:  1. To mask the bitter taste of drugs like Paracetamol, Nitrofurantoin etc. 2. To reduce gastric and other gastro intestinal (G.I) tract irritations, ... 4) Electrostatic Deposition 5) Vacuum deposition 6) Polymerization 7) Multiorific Centrifugal Process.

Define Menstrum and Marc. Write the advantages of alcohol as menstrum.

Description : Define Menstrum and Marc. Write the advantages of alcohol as menstrum.

Last Answer : Menstrum :-Solvent used to extract the drug. Marc:-The drug residue which remains behind after extraction. Advantages of alcohol as menstrum   i) The mould and bacteria cannot grow ... is required to concentrate the alcoholic preparations. v) It dissolves selective active ingredients of drugs.

Write construction and disadvantages of short tube evaporator.

Description : Write construction and disadvantages of short tube evaporator.

Last Answer : Construction:   It consists of number of tubes which are from 1 to 2 meters in length and from 40- 80 mm in diameter. About 1000 tubes are fitted in a vessel upto 2.5 meter or ... It is quite complicated and expensive in construction. 2. Difficult to clean. 3. Maintenance is costly.

Write the disadvantages of formaldehyde gas when used for sterilization.

Description : Write the disadvantages of formaldehyde gas when used for sterilization.

Last Answer : i. Weak penetration power. ii. Difficult to maintain high conc. iii. Require high humidity for effectiveness. iv. Readily inactivated. v. Irritant to respiratory tract. vi. Difficult to remove adsorbed gas. 

Write the stages involved in sterilization of surgical dressing.

Description : Write the stages involved in sterilization of surgical dressing. 

Last Answer : Stages of sterilisation are: 1) Pack or wrap the unsterilized surgical dressing into a suitable device/perforated container or any packaging material i.e parchment paper. 2) Load this container ... the sterilizer. 5) Containers are labelled with date of sterilization to prevent overload storage.

Write the applications of simple distillation in pharmacy.

Description : Write the applications of simple distillation in pharmacy.

Last Answer : i.It is used for the preparation of distilled water and water for injection. ii. Preparation of many volatile oils and aromatic water. iii. Purification of organic solvent. iv. Preparation ... compound like spirit of aromatic spirit of ammonia. vi. To separate volatile and non-volatile solvents 

Write the salient features of fourth edition of I.P.

Description : Write the salient features of fourth edition of I.P.

Last Answer : 1. It contains 1149 monographs and 123 appendices and available in two volumes. 2. Introduction of computer generated formula 3. Some titles have been changed to include more commonly accepted ... for vaccines, hormones, blood products. 10. ORS-Citrate formula recommended by WHO introduced.

Write advantages of water as solvent for extraction

Description : Write advantages of water as solvent for extraction

Last Answer : • It is cheap & easily available. • Non –toxic • Non inflammable. • It has wide solvent action 

Write difference between Hard and Soft gelatin capsules

Description : Write difference between Hard and Soft gelatin capsules

Last Answer : Sr. No.  Hard gelatin capsules  Soft gelatin capsules  1 The hard gelatin capsule shell consists of two parts: Body and cap  The soft gelatin capsule shell becomes a single unit. ... These capsules cannot be adulterated  8 Eg: Amoxycillin Capsule  Eg: Pudin Hara Capsule