Justify the following statement: The Secretary should take certain precautions while corresponding with Directors.

1 Answer

Answer :

Justify the following statement: The Secretary should take certain precautions while corresponding with Directors.

Related questions

Description : Justify the following statement: The secretary should observe certain precautions while corresponding with the Banks.

Last Answer : Justify the following statement: The secretary should observe certain precautions while corresponding with the Banks.

Description : What are the points to be considered by a secretary while corresponding with the directors?

Last Answer : What are the points to be considered by a secretary while corresponding with the directors?

Description : Justify the following statement: The Secretary has to correspond with Directors on important occasions.

Last Answer : Justify the following statement: The Secretary has to correspond with Directors on important occasions.

Description : Justify the following statement: The secretary has to correspond with the Banks under certain circumstances.

Last Answer : Justify the following statement: The secretary has to correspond with the Banks under certain circumstances.

Description : Justify the following statement: Directors exercise their powers and authorities collectively as a Board.

Last Answer : Justify the following statement: Directors exercise their powers and authorities collectively as a Board.

Description : Justify the following statement: The Board of Directors is the elected representative of the shareholders.

Last Answer : Justify the following statement: The Board of Directors is the elected representative of the shareholders.

Description : Justify the following statement: Board of Directors can exercise their powers collectively through the Board Meeting.

Last Answer : Justify the following statement: Board of Directors can exercise their powers collectively through the Board Meeting.

Description : A company secretary is the mouthpiece of the Board of Directors.

Last Answer : Justify the following statement : A company secretary is the mouthpiece of the Board of Directors.

Description : Convening meetings of a company is the responsibility of the– (A) Chairman, Board of Directors (B) Managing Director (C) Company Secretary (D) General Manager

Last Answer : Answer: Company Secretary

Description : Appointment of a Company Secretary is made by– (A) Promoters (B) Board of Directors (C) Debenture holders (D) Government

Last Answer : Answer: Board of Directors

Description : The first Secretary of the company is appointed by– (A) Shareholders (B) Promoters (C) Government (D) Directors

Last Answer : Answer: Promoters

Description : If the corresponding angles of two triangles are equal, then they are always. State true or false and justify your answer. -Maths 9th

Last Answer : Solution :- False, because two equilateral triangles with sides 3 cm and 6 cm respectively have all angles equal, but the triangles are not congruent.

Description : Do you have certain directors or actors whose work you absolutely will not see?

Last Answer : I don’t care for Nicolas Cage or Gwyneth Paltrow and generally ignore their work.

Description : Which of the following is a violation Confidentiality rule of the Code of Ethics? a. The CPA, in response to a court subpoena, submits auditor-prepared workpapers as evidence of possible illegal ... CPA, when questioned in court, admits to knowledge of certain illegal acts perpetrated by the client.

Last Answer : The CPA warns Client B as to the inadvisability of acquiring Client A. The CPA bases this warning on knowledge of Client A's financial condition and a belief that the management of Client A lacks integrity ... was obtained by the CPA as a result of auditing Client A during the past several year is.

Description : Justify the following statement: The Companies Act, 2013 has given certain Powers to ROC.

Last Answer : Justify the following statement: The Companies Act, 2013 has given certain Powers to ROC.

Description : Justify the following statement: The MCA was set up by Central Government to fulfill certain objectives.

Last Answer : Justify the following statement: The MCA was set up by Central Government to fulfill certain objectives.

Description : Which of the listed precautions should be taken when cleaning the internals of a motor with compressed air? A. Open the machine on both ends so as to allow the air and dust to escape. B. Be certain that the ... panel. C. Be certain that the air is clean and as dry as possible. D. All of the above.

Last Answer : Answer: D

Description : What precautions do you suggest for a consumer to take while purchasing medicines from the market ? -SST 10th

Last Answer : While buying / purchasing medicine the following precautions should be taken : (i) Price, batch no., date of manufacture. (ii) Address of the manufacturing company. (iii) Expiry date. (iv ... proper use. (v) Information relating to side effects and risk associated with usage of that medicine.

Description : What precautions will you take while doing the study of different parts of an embryo of a dicot seed?

Last Answer : What precautions will you take while doing the study of different parts of an embryo of a dicot seed?

Description : The average monthly salary of directors & office boys of an organization Rs. 3750. Then the average salary of all directors is Rs. 6000 while that of all office boys is Rs. 3000 per month. If there are 120 employees in the ... find the ratio of manager and office boy. A) 2:5 B) 3:1 C) 1:3 D) 5:2 

Last Answer :  C)  let the number of director be X and office boy be 120-x total salary of director and office boy = 120*3750 = Rs.450000 total salary of director = 6000x total salary of office boy = 3000* (120 - ... director number of office boy = 120-30 = 90 ratio of director to office boy = 30:90 = 1:3

Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection a. Mode b. Grade c. Numerical Aperture d. Dispersion

Last Answer : a. Mode

Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection ∙ a. Mode ∙ b. Grade ∙ c. Numerical Aperture ∙ d. Dispersion

Last Answer : a. Mode

Description : 9. What are antibiotics? What precautions must be taken while taking antibiotics? -Science

Last Answer : Chemical agents that kill or stop the growth of disease-causing microorganisms are called antibiotics. Antibiotics should be taken only on the advice of a qualified doctor. Also, one must complete the course prescribed by the doctor.

Description : What are antibiotics? What precautions must be taken while taking antibiotics? -Biology

Last Answer : Antibiotics are the medicines which kill or stop the growth of the disease-causing microbes. They are manufactured by growing specific microorganisms. They are used to cure a variety of diseases. It ... . Antibiotics are, however, not effective against cold and flu as they are caused by viruses.

Description : Write two precautions to be taken while identifying different parts of an embryo of a dicot seed. -Science

Last Answer : (i) The slide should be properly focused. (ii) Slide should be observed first under low-power magnification and then under high-power magnification of the compound microscope.

Description : Write three precautions to be observed while using a clinical thermometer. -Science-7

Last Answer : Do not wash the thermometer with hot water. Ensure that before use the mercury level is below 35 ∘C. Read the thermometer keeping the level of mercury along the line of sight. Handle the thermometer with care, as you handle any glass articles.

Description : To avoid problems while working on the Internet, you should follow these precautions. -Technology

Last Answer : (d) All of the above

Description : What are the precautions to be taken while using coolant ?

Last Answer : : ( 1) The oil water ratio of soluble oil cutting fluid has to be checked from time to time and when water evaporates, the amount of water decreases. In such cases, the ratio of coolant ... job-material. (5) Cutting fluids used for ferrous metals should not be used in nonferrous metal machining.

Last Answer : : Before entering the main road from the side road or small road, it is necessary to reduce the speed of the vehicle , stop it if necessary , and make arrangements to allow the vehicle on the main ... to enter the main road as soon as possible by observing the movement of vehicles on the main road.

Last Answer : Brakes work less as the road is slippery during rains. For this reason, as an extra precaution, you should drive at a slower speed (half the normal speed) , so that the brakes can be applied and ... at a slow speed so that the car can be stopped or controlled very easily by applying the brakes .

Description : Precautions to be taken while using cooking gas cylinders?

Last Answer : • Never leave cooking unattended • Never get distracted • Never allowed a child to cook without adult supervision • Keep the flame from extending past the pot ideas • Turn pot handles away from the stove edge • Keep stoves and cook tops free of grease and fat build-up

Description : What are the precautions to be taken while writing a film?

Last Answer : What are the precautions to be taken while writing a film?

Description : What are the precautions to be taken while terminating the bushings?

Last Answer : Contact surfaces with intermediate plates, Mating surfaces should be identical. 

Description : What precautions should be taken while meggering main generator?

Last Answer : All PT’s are racked out. Earthing transformer grounding terminals disconnected. Barring gear shall be kept off. Stator water shall be drained fully and hot air blown through conductors. Generator flexible lines shall be disconnected to isolate GT/UT. 

Description : What are the precautions to be taken while working at SPPT?

Last Answer : PT trolley should be isolated very carefully so as to isolate secondary terminals first and primary (HT) terminals next. When primary isolated the arrangement in the trolley make ground connection and HT ... side of the fuse to replace the fuse. Because PT may be energised through secondary side. 

Description : What are precautions to be taken while doing maintenance or repair work on power cables?  

Last Answer : A research organised by EPRI (electric power research institute) on medium voltage XLPE cables found that DC high potential at 80% of the factory value a. Subsequently reduces the life of ... of cramped conductor strands is achieved otherwise it will add resistance and create over heating. 

Description : What precautions should be taken while working in high tritium areas?

Last Answer : Use respirators, plastic suits, VP suits if concentration of tritium is very high. Avoid getting hurt while working because tritium may go through the skin by sweat to the blood. If by chance there is tritium intake in the body drink lots of fluids. 

Description : Write two precautions to be taken while identifying different parts of an embryo of a dicot seed.

Last Answer : Answer. (i) The slide should be properly focused. (ii) Slide should be observed first under low-power magnification and then under high-power magnification of the compound microscope.

Description : Mention any four precautions while doing an experiment to verify Ohm’s law?

Last Answer : Answer. All connections should be kept tight. The zero error in the ammeter and voltmeter should be noted down and taken into consideration while reading the measurement. The bare ends of the ... current through the circuit should be kept as low as possible otherwise heating of the resistor occurs.

Description : Write two precautions that must be taken while studying the decomposition reaction, when the ferrous sulphate crystals are heated in a boiling tube?

Last Answer : Answer. Keep your nose away from the gas like SO2 which is suffocative. Use tube holder to heat the test tube.

Description : Write any two precautions while performing the pH experiment?

Last Answer : Answer. Wash the dropper with water after each use or use new dropper for different samples. Keep the pH paper away from chemicals while doing the experiment.

Description : List the precautions to be taken while using hot air oven.

Last Answer : 1. Glass apparatus and equipment should be wrapped individually. 2. Articles should be placed in such away that they should not interfere with air flow 3. Once in operation oven should not be open ... substance should never be sterilized in hot air oven. 6. It should never be over loaded.

Description : Write the precautions to be taken while placing the material in hot air oven

Last Answer : 1. It should be filled to its capacity only should not be overloaded. 2. Glass apparatus and equipment should be wrapped individually. 3. Articles should be placed in such a way that ... Proper biological indicators should be used 7. Thermolabile substance should not be sterilized in hot air oven

Description : Mention precautions to be taken while using of eye drop. 

Last Answer : Do not touch the tip of the dropper. Never rinse the dropper. Never use eye drop that have changed colour. After instillation of drop, do not close eyes tightly or blink more than usual. Discard the content after one month of use.  

Description : State any four precautions to be taken while plastering.

Last Answer : i. Before application of the plastering, the surface must be clean and free of dirt, oil, or other elements which may interfere with bonding. ii. Smooth or non-absorbent surfaces should be prepared. iii. ... or vertical line at the end of the day or if work requires to be suspended for any reason.

Description : State any four precautions to be taken while marking layout on ground.

Last Answer : The necessary precaution to be taken while marking layout on ground are as follows 1. All vertical wooden post should be firmly fixed into the ground with concrete and curing should be done to the ... the face line or center line correctly. 19. Use proper or correct plumb bob for centering. 

Description : Write any two precautions to be taken while using planimeter. 

Last Answer : 1. Set the anchor point inside or outside the figure depending on size of figure. If the area is very large ,it can be divided into number of sections. 2. The value of C ( ... moved preciously over the boundary of figure. 3. Operating manual shall be referred before operating different functions

Description : State any four precautions to be taken while using an Ammeter and Voltmeter. 

Last Answer : Precautions to be taken while using Ammeters: Ammeters are to be connected in series of circuits. 1. While connecting ammeters across emf source always a series resistance should be used. This ... first &then range should be decreased. 4. Loading effect can be minimized by using high sensitivity

Description : State any four precautions to be taken while selecting stations for chain surveying.

Last Answer : Following are the precautions to be taken while selecting station for chain surveying. 1) As far as possible the survey work should be based upon the basic principle of surveying i.e. working from whole to ... level ground. 9) The survey lines should run as far as possible nearer to object.