An internal mouthpiece is said to be running free if the length of the mouthpiece is __________ the diameter of the orifice. (A) Less than twice (B) More than twice (C) Less than three times (D) More than three times

An internal mouthpiece is said to be running free if the length of the mouthpiece is __________
the diameter of the orifice.
(A) Less than twice
(B) More than twice
(C) Less than three times
(D) More than three times
by

1 Answer

Answer :

Answer: Option C
by

Related questions

An internal mouthpiece is said to be running __________ if the length of the mouthpiece is more than three times the diameter of the orifice. (A) Free (B) Partially (C) Full (D) None of these

Description : An internal mouthpiece is said to be running __________ if the length of the mouthpiece is more than three times the diameter of the orifice. (A) Free (B) Partially (C) Full (D) None of these

Last Answer : Answer: Option C

A pipe of length more than double the diameter of orifice fitted externally or internally to the orifice is called a (A) Notch (B) Weir (C) Mouthpiece (D) Nozzle

Description : A pipe of length more than double the diameter of orifice fitted externally or internally to the orifice is called a (A) Notch (B) Weir (C) Mouthpiece (D) Nozzle

Last Answer : Answer: Option C

In a short cylindrical external mouthpiece, the vena contracta occurs at a distance __________ the diameter of the orifice from the outlet of orifice. (A) Equal to (B) One-fourth (C) One-third (D) One-half

Description : In a short cylindrical external mouthpiece, the vena contracta occurs at a distance __________ the diameter of the orifice from the outlet of orifice. (A) Equal to (B) One-fourth (C) One-third (D) One-half

Last Answer : Answer: Option B

15. When an internal mouthpiece is running full, the discharge through the mouthpiece is twice the discharge when it is running free. A) Correct B) Incorrect

Description : 15. When an internal mouthpiece is running full, the discharge through the mouthpiece is twice the discharge when it is running free. A) Correct B) Incorrect

Last Answer : B

Consider the following devices : 1. Orifice 2. Borda’s mouthpiece running free 3. Bell mouthed orifice 4. External mouthpiece What is the correct sequence of these devices by decreasing magnitude of coefficient of discharge? a) 2, 3, 1 and 4 b) 4, 3, 1 and 2 c) 4, 1, 3 and 2 d) 2, 1, 3 and 4

Description : Consider the following devices : 1. Orifice 2. Borda’s mouthpiece running free 3. Bell mouthed orifice 4. External mouthpiece What is the correct sequence of these devices by decreasing magnitude of coefficient of discharge? a) 2, 3, 1 and 4 b) 4, 3, 1 and 2 c) 4, 1, 3 and 2 d) 2, 1, 3 and 4

Last Answer : b) 4, 3, 1 and 2

05. In an internal mouthpiece, if the jet after contraction expands and fills up the whole mouthpiece, then the mouthpiece is said to be running free. A) True B) False

Description : 05. In an internal mouthpiece, if the jet after contraction expands and fills up the whole mouthpiece, then the mouthpiece is said to be running free. A) True B) False

Last Answer : B

05. In an internal mouthpiece, if the jet after contraction expands and fills up the whole mouthpiece, then the mouthpiece is said to be running free. A) True B) False

Description : 05. In an internal mouthpiece, if the jet after contraction expands and fills up the whole mouthpiece, then the mouthpiece is said to be running free. A) True B) False

Last Answer : A

In an internal mouthpiece, if the jet after contraction does not touch the sides of the mouthpiece, then the mouthpiece is said to be (A) Running full (B) Running free (C) Partially running full (D) Partially running free

Description : In an internal mouthpiece, if the jet after contraction does not touch the sides of the mouthpiece, then the mouthpiece is said to be (A) Running full (B) Running free (C) Partially running full (D) Partially running free

Last Answer : Answer: Option B

The discharge through a convergent mouthpiece is __________ the discharge through an internal mouthpiece of the same diameter and head of water. (A) Equal to (B) One-half (C) Three fourth (D) Double

Description : The discharge through a convergent mouthpiece is __________ the discharge through an internal mouthpiece of the same diameter and head of water. (A) Equal to (B) One-half (C) Three fourth (D) Double

Last Answer : Answer: Option D

When an internal mouthpiece is running free, the discharge through the mouthpiece is (where a = Area of mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.5 a. gH (B) 0.707 a. gH (C) 0.855 a. gH (D) a. gH

Description : When an internal mouthpiece is running free, the discharge through the mouthpiece is (where a = Area of mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.5 a. gH (B) 0.707 a. gH (C) 0.855 a. gH (D) a. gH

Last Answer : Answer: Option A

The coefficient of discharge in case of internal mouthpiece is __________ that of external mouthpiece. (A) Less than (B) More than (C) Equal to (D) None of these

Description : The coefficient of discharge in case of internal mouthpiece is __________ that of external mouthpiece. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

In an internal mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to height of the liquid above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Description : In an internal mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to height of the liquid above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

In an external mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to 0.89 times the height of the liquid, above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Description : In an external mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to 0.89 times the height of the liquid, above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

An orifice is said to be large, if (A) The size of orifice is large (B) The velocity of flow is large (C) The available head of liquid is more than 5 times the height of orifice (D) The available head of liquid is less than 5 times the height of orifice

Description : An orifice is said to be large, if (A) The size of orifice is large (B) The velocity of flow is large (C) The available head of liquid is more than 5 times the height of orifice (D) The available head of liquid is less than 5 times the height of orifice

Last Answer : Answer: Option D

Re-entrant or Borda's mouthpiece is an __________ mouthpiece. (A) Internal (B) External(C) Both A and B (D) None of these

Description : Re-entrant or Borda's mouthpiece is an __________ mouthpiece. (A) Internal (B) External (C) Both A and B (D) None of these

Last Answer : Answer: Option A

The length of the straight portion of a bar beyond the end of the hook, should be at least (A) Twice the diameter (B) Thrice the diameter (C) Four times the diameter (D) Seven times the diameter

Description : The length of the straight portion of a bar beyond the end of the hook, should be at least (A) Twice the diameter (B) Thrice the diameter (C) Four times the diameter (D) Seven times the diameter

Last Answer : Answer: Option D

10. In an external or internal mouthpiece, the absolute pressure head at vena contracta is zero when atmospheric pressure head is 10.3 m of water. A) Correct B) Incorrect

Description : 10. In an external or internal mouthpiece, the absolute pressure head at vena contracta is zero when atmospheric pressure head is 10.3 m of water. A) Correct B) Incorrect

Last Answer : A

The radius of a bar bend to form a hook, should not be less than (A) Twice the diameter (B) Thrice the diameter (C) Four times the diameter (D) Five times the diameter

Description : The radius of a bar bend to form a hook, should not be less than (A) Twice the diameter (B) Thrice the diameter (C) Four times the diameter (D) Five times the diameter

Last Answer : Answer: Option A

A flaky aggregate is said to be elongated if its length is (A) Equal to the mean size (B) Twice the mean size (C) Thrice the mean size (D) Four times the mean size

Description : A flaky aggregate is said to be elongated if its length is (A) Equal to the mean size (B) Twice the mean size (C) Thrice the mean size (D) Four times the mean size

Last Answer : Answer: Option B

A seamless cylinder of storage capacity of 0.03mᵌis subjected to an internal pressure of 21MPa. The ultimate strength of material of cylinder is 350N/mm².Determine the length of the cylinder if it is twice the diameter of the cylinder. a) 540mm b) 270mm c) 400mm d) 350mm

Description : A seamless cylinder of storage capacity of 0.03mᵌis subjected to an internal pressure of 21MPa. The ultimate strength of material of cylinder is 350N/mm².Determine the length of the cylinder if it is twice the diameter of the cylinder. a) 540mm b) 270mm c) 400mm d) 350mm

Last Answer : a) 540mm

The coefficient of discharge for an external mouthpiece depends upon (A) Velocity of liquid (B) Pressure of liquid (C) Area of mouthpiece (D) Length of mouthpiece

Description : The coefficient of discharge for an external mouthpiece depends upon (A) Velocity of liquid (B) Pressure of liquid (C) Area of mouthpiece (D) Length of mouthpiece

Last Answer : Answer: Option D

The discharge co-efficient for an orifice meter does not depend upon the (A) Pipe length (B) Ratio of pipe diameter to orifice diameter (C) Type of orifice & the Reynolds number (D) Pipe diameter

Description : The discharge co-efficient for an orifice meter does not depend upon the (A) Pipe length (B) Ratio of pipe diameter to orifice diameter (C) Type of orifice & the Reynolds number (D) Pipe diameter

Last Answer : (A) Pipe length

A jet of water discharging from a 40 mm diameter orifice has a diameter of 32 mm at its vena contracta. The coefficient of contraction is (A) 0.46 (B) 0.64 (C) 0.78 (D) 0.87

Description : A jet of water discharging from a 40 mm diameter orifice has a diameter of 32 mm at its vena contracta. The coefficient of contraction is (A) 0.46 (B) 0.64 (C) 0.78 (D) 0.87

Last Answer : Answer: Option B

Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Description : Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Last Answer : Answer: Option D

Minimum spacing between horizontal parallel reinforcement of different sizes, should not be less than (A) One diameter of thinner bar (B) One diameter of thicker bar (C) Twice the diameter of thinner bar (D) None of these

Description : Minimum spacing between horizontal parallel reinforcement of different sizes, should not be less than (A) One diameter of thinner bar (B) One diameter of thicker bar (C) Twice the diameter of thinner bar (D) None of these

Last Answer : Answer: Option B

The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Last Answer : Answer: Option D

The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than (A) 18 bar diameters (B) 24 bar diameters (C) 30 bar diameters (D) 36 bar diameters

Description : The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than (A) 18 bar diameters (B) 24 bar diameters (C) 30 bar diameters (D) 36 bar diameters

Last Answer : Answer: Option C

For efficient working of a control meter, its throat length is approximately kept (A) Equal to the critical depth (B) Twice the critical depth (C) Three times the critical depth (D) Four times the critical depth

Description : For efficient working of a control meter, its throat length is approximately kept (A) Equal to the critical depth (B) Twice the critical depth (C) Three times the critical depth (D) Four times the critical depth

Last Answer : Answer: Option C

A seamless cylinder of storage capacity of 0.03mᵌis subjected to an internal pressure of 21MPa. The ultimate strength of material of cylinder is 350N/mm².Determine the thickness of the cylinder if it is twice the diameter of the cylinder. a) 12mm b) 4mm c) 8mm d) 16mm

Description : A seamless cylinder of storage capacity of 0.03mᵌis subjected to an internal pressure of 21MPa. The ultimate strength of material of cylinder is 350N/mm².Determine the thickness of the cylinder if it is twice the diameter of the cylinder. a) 12mm b) 4mm c) 8mm d) 16mm

Last Answer : c) 8mm

Torque and bending moment of 100 kN.m and 200 kN.m acts on a shaft which has external diameter twice of internal diameter. What is the external diameter of the shaft which is subjected to a maximum shear stress of 90 N/mm2? a. 116.5 mm b. 233.025 mm c. 587.1 mm d. 900 mm

Description : Torque and bending moment of 100 kN.m and 200 kN.m acts on a shaft which has external diameter twice of internal diameter. What is the external diameter of the shaft which is subjected to a maximum shear stress of 90 N/mm2? a. 116.5 mm b. 233.025 mm c. 587.1 mm d. 900 mm

Last Answer : c. 587.1 mm

A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of head and discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Description : A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of ... discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Last Answer : Answer: Option C

Two pipe systems can be said to be equivalent, when the following quantities are same (A) Friction loss and flow (B) Length and diameter (C) Flow and length (D) Friction factor and diameter

Description : Two pipe systems can be said to be equivalent, when the following quantities are same (A) Friction loss and flow (B) Length and diameter (C) Flow and length (D) Friction factor and diameter

Last Answer : Answer: Option A

In basins subjected to strong winds and tide, the length of the berthing area should not be less than (A) The length of design vessel (B) The length of design vessel + 10% clearance between adjacent vessels (C) The length of design vessel + 20% clearance between adjacent vessels (D) Twice the length of design vessel

Description : In basins subjected to strong winds and tide, the length of the berthing area should not be less than (A) The length of design vessel (B) The length of design vessel + 10% clearance ... The length of design vessel + 20% clearance between adjacent vessels (D) Twice the length of design vessel

Last Answer : (C) The length of design vessel + 20% clearance between adjacent vessels

Two piping system are said to be equivalent, when the __________ are same. (A) Fluid flow rate & friction loss (B) Length & friction factor (C) Diameter & friction factor (D) Length & diameter

Description : Two piping system are said to be equivalent, when the __________ are same. (A) Fluid flow rate & friction loss (B) Length & friction factor (C) Diameter & friction factor (D) Length & diameter

Last Answer : (A) Fluid flow rate & friction loss

Vena-contracta formed during flow of a liquid through an orificemeter has (A) Minimum liquid cross-section (B) More diameter compared to orifice diameter (C) Minimum velocity of fluid stream (D) None of these

Description : Vena-contracta formed during flow of a liquid through an orificemeter has (A) Minimum liquid cross-section (B) More diameter compared to orifice diameter (C) Minimum velocity of fluid stream (D) None of these

Last Answer : (A) Minimum liquid cross-section

The value of coefficient of velocity for a sharp edged orifice __________ with the head of water. (A) Decreases (B) Increases (C) Remain same (D) None of these

Description : The value of coefficient of velocity for a sharp edged orifice __________ with the head of water. (A) Decreases (B) Increases (C) Remain same (D) None of these

Last Answer : Answer: Option B

A cylinder is said to be thin if the ratio of its thickness and diameter, is less than (A) 1/25 (B) 1/20 (C) 1/15 (D) 1/10

Description : A cylinder is said to be thin if the ratio of its thickness and diameter, is less than (A) 1/25 (B) 1/20 (C) 1/15 (D) 1/10

Last Answer : (D) 1/10

01. In a convergent mouthpiece, the absolute pressure head at vena contracta is the same as that of the atmosphere. A) True B) False

Description : 01. In a convergent mouthpiece, the absolute pressure head at vena contracta is the same as that of the atmosphere. A) True B) False

Last Answer : A

The coefficient of discharge for an external mouthpiece is (A) 0.375 (B) 0.5 (C) 0.707 (D) 0.855

Description : The coefficient of discharge for an external mouthpiece is (A) 0.375 (B) 0.5 (C) 0.707 (D) 0.855

Last Answer : Answer: Option D

The discharge through an external mouthpiece is given by (where a = Cross-sectional area of the mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.855 a. gH) (B) 1.855 aH. g) (C) 1.585 a. gH) (D) 5.85 aH. g)

Description : The discharge through an external mouthpiece is given by (where a = Cross-sectional area of the mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.855 a. gH) (B) 1.855 aH. g) (C) 1.585 a. gH) (D) 5.85 aH. g)

Last Answer : Answer: Option A

Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Description : Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Last Answer : (A) Type of orifice

With increase in the ratio of orifice diameter to pipe diameter, the fraction of the orifice pressure differential that is permanently lost (A) Increases(B) Decreases(C) Remains unchanged(D) Increases exponentially

Description : With increase in the ratio of orifice diameter to pipe diameter, the fraction of the orifice pressure differential that is permanently lost (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Last Answer : (B) Decreases

What is the co-efficient of contraction, if a fluid jet discharging from a 50 mm diameter orifice has a 40 mm diameter at its vena-contracta? (A) 0.64 (B) 1.65 (C) 0.32 (D) 0.94

Description : What is the co-efficient of contraction, if a fluid jet discharging from a 50 mm diameter orifice has a 40 mm diameter at its vena-contracta? (A) 0.64 (B) 1.65 (C) 0.32 (D) 0.94

Last Answer : (A) 0.64

With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Description : With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Last Answer : (C) Remain constant

The length of the lap in a compression member is kept greater than bar diameter x (Permissible stress in bar / Five times the bond stress) or (A) 12 bar diameters (B) 18 bar diameters (C) 24 bar diameters (D) 30 bar diameters

Description : The length of the lap in a compression member is kept greater than bar diameter x (Permissible stress in bar / Five times the bond stress) or (A) 12 bar diameters (B) 18 bar diameters (C) 24 bar diameters (D) 30 bar diameters

Last Answer : Answer: Option C

The diameter of the column head support a flat slab, is generally kept (A) 0.25 times the span length (B) 0.25 times the diameter of the column (C) 4.0 cm larger than the diameter of the column (D) 5.0 cm larger than the diameter of the column

Description : The diameter of the column head support a flat slab, is generally kept (A) 0.25 times the span length (B) 0.25 times the diameter of the column (C) 4.0 cm larger than the diameter of the column (D) 5.0 cm larger than the diameter of the column

Last Answer : Option A

Robert and David were preparing to have a water balloon fight. 'No Fair' cried Robert, 'You have 3 times as many as I do!' David said 'Fine!' and gave Robert 10 more balloons. 'Still not fair!' argued Robert, 'You still have twice as many as I do.' How many more balloons must David give Robert for them to have the same number? -Riddles

Description : Robert and David were preparing to have a water balloon fight. 'No Fair' cried Robert, 'You have 3 times as many as I do!' David said 'Fine!' and gave Robert 10 more balloons. 'Still not fair!' ... as I do.' How many more balloons must David give Robert for them to have the same number? -Riddles

Last Answer : David must give Robert another 20 water balloons, giving them each 60. Robert started with 30 water balloons and David with 90.

Two shafts A and B are made of same material. The diameter of shaft A is twice that of B. The torque transmitted by shaft A will be (A) Twice that of B (B) Four times that of B (C) Eight times that of B (D) Sixteen times that of B

Description : Two shafts A and B are made of same material. The diameter of shaft A is twice that of B. The torque transmitted by shaft A will be (A) Twice that of B (B) Four times that of B (C) Eight times that of B (D) Sixteen times that of B

Last Answer : (C) Eight times that of B