When an internal mouthpiece is running free, the discharge through the mouthpiece is (where a = Area of mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.5 a. gH (B) 0.707 a. gH (C) 0.855 a. gH (D) a. gH

When an internal mouthpiece is running free, the discharge through the mouthpiece is (where a =
Area of mouthpiece, and H = Height of liquid above the mouthpiece)
(A) 0.5 a. gH
(B) 0.707 a. gH
(C) 0.855 a. gH
(D) a. gH
by

1 Answer

Answer :

Answer: Option A
by

Related questions

The discharge through an external mouthpiece is given by (where a = Cross-sectional area of the mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.855 a. gH) (B) 1.855 aH. g) (C) 1.585 a. gH) (D) 5.85 aH. g)

Description : The discharge through an external mouthpiece is given by (where a = Cross-sectional area of the mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.855 a. gH) (B) 1.855 aH. g) (C) 1.585 a. gH) (D) 5.85 aH. g)

Last Answer : Answer: Option A

The coefficient of discharge for an external mouthpiece is (A) 0.375 (B) 0.5 (C) 0.707 (D) 0.855

Description : The coefficient of discharge for an external mouthpiece is (A) 0.375 (B) 0.5 (C) 0.707 (D) 0.855

Last Answer : Answer: Option D

The discharge over a rectangular notch is (where b = Width of notch, and H = Height of liquid, above the sill of the notch) (A) (2/3) Cd × b × gH) (B) (2/3) Cd × b × g) × H (C) (2/3) Cd × b × g) × H 3/2 (D) (2/3) Cd × b × g) × H

Description : The discharge over a rectangular notch is (where b = Width of notch, and H = Height of liquid, above the sill of the notch) (A) (2/3) Cd × b × gH) (B) (2/3) Cd × b × g) × H (C) (2/3) Cd × b × g) × H 3/2 (D) (2/3) Cd × b × g) × H

Last Answer : Answer: Option C

15. When an internal mouthpiece is running full, the discharge through the mouthpiece is twice the discharge when it is running free. A) Correct B) Incorrect

Description : 15. When an internal mouthpiece is running full, the discharge through the mouthpiece is twice the discharge when it is running free. A) Correct B) Incorrect

Last Answer : B

Consider the following devices : 1. Orifice 2. Borda’s mouthpiece running free 3. Bell mouthed orifice 4. External mouthpiece What is the correct sequence of these devices by decreasing magnitude of coefficient of discharge? a) 2, 3, 1 and 4 b) 4, 3, 1 and 2 c) 4, 1, 3 and 2 d) 2, 1, 3 and 4

Description : Consider the following devices : 1. Orifice 2. Borda’s mouthpiece running free 3. Bell mouthed orifice 4. External mouthpiece What is the correct sequence of these devices by decreasing magnitude of coefficient of discharge? a) 2, 3, 1 and 4 b) 4, 3, 1 and 2 c) 4, 1, 3 and 2 d) 2, 1, 3 and 4

Last Answer : b) 4, 3, 1 and 2

The discharge through a convergent mouthpiece is __________ the discharge through an internal mouthpiece of the same diameter and head of water. (A) Equal to (B) One-half (C) Three fourth (D) Double

Description : The discharge through a convergent mouthpiece is __________ the discharge through an internal mouthpiece of the same diameter and head of water. (A) Equal to (B) One-half (C) Three fourth (D) Double

Last Answer : Answer: Option D

In an internal mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to height of the liquid above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Description : In an internal mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to height of the liquid above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

The coefficient of discharge for an external mouthpiece depends upon (A) Velocity of liquid (B) Pressure of liquid (C) Area of mouthpiece (D) Length of mouthpiece

Description : The coefficient of discharge for an external mouthpiece depends upon (A) Velocity of liquid (B) Pressure of liquid (C) Area of mouthpiece (D) Length of mouthpiece

Last Answer : Answer: Option D

The coefficient of discharge in case of internal mouthpiece is __________ that of external mouthpiece. (A) Less than (B) More than (C) Equal to (D) None of these

Description : The coefficient of discharge in case of internal mouthpiece is __________ that of external mouthpiece. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

05. In an internal mouthpiece, if the jet after contraction expands and fills up the whole mouthpiece, then the mouthpiece is said to be running free. A) True B) False

Description : 05. In an internal mouthpiece, if the jet after contraction expands and fills up the whole mouthpiece, then the mouthpiece is said to be running free. A) True B) False

Last Answer : B

05. In an internal mouthpiece, if the jet after contraction expands and fills up the whole mouthpiece, then the mouthpiece is said to be running free. A) True B) False

Description : 05. In an internal mouthpiece, if the jet after contraction expands and fills up the whole mouthpiece, then the mouthpiece is said to be running free. A) True B) False

Last Answer : A

An internal mouthpiece is said to be running __________ if the length of the mouthpiece is more than three times the diameter of the orifice. (A) Free (B) Partially (C) Full (D) None of these

Description : An internal mouthpiece is said to be running __________ if the length of the mouthpiece is more than three times the diameter of the orifice. (A) Free (B) Partially (C) Full (D) None of these

Last Answer : Answer: Option C

In an internal mouthpiece, if the jet after contraction does not touch the sides of the mouthpiece, then the mouthpiece is said to be (A) Running full (B) Running free (C) Partially running full (D) Partially running free

Description : In an internal mouthpiece, if the jet after contraction does not touch the sides of the mouthpiece, then the mouthpiece is said to be (A) Running full (B) Running free (C) Partially running full (D) Partially running free

Last Answer : Answer: Option B

An internal mouthpiece is said to be running free if the length of the mouthpiece is __________ the diameter of the orifice. (A) Less than twice (B) More than twice (C) Less than three times (D) More than three times

Description : An internal mouthpiece is said to be running free if the length of the mouthpiece is __________ the diameter of the orifice. (A) Less than twice (B) More than twice (C) Less than three times (D) More than three times

Last Answer : Answer: Option C

In an external mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to 0.89 times the height of the liquid, above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Description : In an external mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to 0.89 times the height of the liquid, above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

The discharge over a right angled notch is (where H = Height of liquid above the apex of notch) (A) (8/15) Cd. 2g. H (B) (8/15) Cd. 2g. H3/2 (C) (8/15) Cd. 2g. H² (D) (8/15) Cd. 2g. H5/2

Description : The discharge over a right angled notch is (where H = Height of liquid above the apex of notch) (A) (8/15) Cd. 2g. H (B) (8/15) Cd. 2g. H3/2 (C) (8/15) Cd. 2g. H² (D) (8/15) Cd. 2g. H5/2

Last Answer : Answer: Option D

If length of weld is l and leg h, then area of throat can be given by a) 0.707 hl b) 1.414hl c) hl d) None of the listed

Description : If length of weld is l and leg h, then area of throat can be given by a) 0.707 hl b) 1.414hl c) hl d) None of the listed

Last Answer : a) 0.707 hl

The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of discharge) (A) Q = (2/3) Cd × b × (2g) × (H2 - H1) (B) Q = (2/3) Cd × b × (2g) × (H2 1/2 - H1 1/2) (C) Q = (2/3) Cd × b × (2g) × (H2 3/2 - H1 3/2) (D) Q = (2/3) Cd × b × (2g) × (H2 2 - H1 2 )

Description : The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of ... H1 3/2) (D) Q = (2/3) Cd b (2g) (H2 2 - H1 2 )

Last Answer : Answer: Option C

10. In an external or internal mouthpiece, the absolute pressure head at vena contracta is zero when atmospheric pressure head is 10.3 m of water. A) Correct B) Incorrect

Description : 10. In an external or internal mouthpiece, the absolute pressure head at vena contracta is zero when atmospheric pressure head is 10.3 m of water. A) Correct B) Incorrect

Last Answer : A

Re-entrant or Borda's mouthpiece is an __________ mouthpiece. (A) Internal (B) External(C) Both A and B (D) None of these

Description : Re-entrant or Borda's mouthpiece is an __________ mouthpiece. (A) Internal (B) External (C) Both A and B (D) None of these

Last Answer : Answer: Option A

The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach) (A) (2/3) Cd × L. 2g [H1 - Ha] (B) (2/3) Cd × L. 2g [H1 3/2 - Ha 3/2] (C) (2/3) Cd × L. 2g [H1 2 - Ha 2 ] (D) (2/3) Cd × L. 2g [H1 5/2 - Ha 5/2]

Description : The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of ... 2g [H1 2 - Ha 2 ] (D) (2/3) Cd L. 2g [H1 5/2 - Ha 5/2]

Last Answer : Answer: Option B

For a strongest rectangular beam cut from a circular log, the ratio of the width and depth, is (A) 0.303 (B) 0.404 (C) 0.505 (D) 0.707

Description : For a strongest rectangular beam cut from a circular log, the ratio of the width and depth, is  (A) 0.303  (B) 0.404  (C) 0.505  (D) 0.707 

Last Answer : (D) 0.707 

During erection, the pile of length is supported by a crane at a distance of (A) 0.207 l (B) 0.293 l (C) 0.707 l (D) 0.793 l

Description : During erection, the pile of length is supported by a crane at a distance of (A) 0.207 l (B) 0.293 l (C) 0.707 l (D) 0.793 l

Last Answer : (C) 0.707 l

Check in a centrifugal pump is (A) Provided in the discharge line (B) Generally a globe valve (C) Provided to prevent liquid from backing up through the pump when the pump is turned off or accidently stops running (D) All (A), (B) and (C)

Description : Check in a centrifugal pump is (A) Provided in the discharge line (B) Generally a globe valve (C) Provided to prevent liquid from backing up through the pump when the pump is turned off or accidently stops running (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Area under tension in a single transverse fillet lap weld is (i)0.707 tl (ii) 0.807 tl (iii) 400 tl (iv)None

Description : Area under tension in a single transverse fillet lap weld is (i)0.707 tl (ii) 0.807 tl (iii) 400 tl (iv)None

Last Answer : (i)0.707 tl

GH controls growth through

Description : GH controls growth through

Last Answer : GH controls growth through A. rRNA B. tRNA C. mRNA D. None of the above

If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Description : If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Last Answer : Answer: Option C

149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Description : 149 The power transmitted through a pipe is (where w = Specific weight in N/m3 , and Q = Discharge in m 3 /s) (A) w × Q × H (B) w × Q × hf (C) w × Q (H - hf ) (D) w × Q (H + hf )

Last Answer : Answer: Option C

The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2(B) wH (C) wH2 /2 (D) wH2 /4

Description : The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2 (B) wH (C) wH2 /2 (D) wH2 /4

Last Answer : Answer: Option C

A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid) (A) wH (B) wH/2 (C) wH2 /2 (D) wH2 /3

Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid) (A) wH (B) wH/2 (C) wH2 /2 (D) wH2 /3

Last Answer : Answer: Option C

If the coefficient of discharge is 0.6, then the discharge over a right angled notch is (A) 0.417 H 5/2 (B) 1.417 H 5/2 (C) 4.171 H 5/2 (D) 7.141 H 5/2

Description : If the coefficient of discharge is 0.6, then the discharge over a right angled notch is (A) 0.417 H 5/2 (B) 1.417 H 5/2 (C) 4.171 H 5/2 (D) 7.141 H 5/2

Last Answer : Answer: Option B

When the coefficient of discharge (Cd) is 0.623, then the general equation for discharge over a rectangular weir is (A) 1.84(L - 0.1nH)H 3/2 (B) 1.84(L - nH)H 2 (C) 1.84(L - 0.1nH)H 5/2 (D) 1.84(L - nH)H 3

Description : When the coefficient of discharge (Cd) is 0.623, then the general equation for discharge over a rectangular weir is (A) 1.84(L - 0.1nH)H 3/2 (B) 1.84(L - nH)H 2 (C) 1.84(L - 0.1nH)H 5/2 (D) 1.84(L - nH)H 3

Last Answer : Answer: Option A

According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Description : According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Last Answer : Answer: Option A

The maximum discharge over a broad crested weir is (A) 0.384 Cd × L × H1/2 (B) 0.384 Cd × L × H3/2 (C) 1.71 Cd × L × H1/(D) 1.71 Cd × L × H 3/

Description : The maximum discharge over a broad crested weir is (A) 0.384 Cd × L × H1/2 (B) 0.384 Cd × L × H3/2 (C) 1.71 Cd × L × H1/ (D) 1.71 Cd × L × H 3/

Last Answer : Answer: Option D

The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface) (A) (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Description : The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, ... (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Last Answer : Answer: Option D

A pitot tube is used to measure the (A) Velocity of flow at the required point in a pipe (B) Pressure difference between two points in a pipe (C) Total pressure of liquid flowing in a pipe (D) Discharge through a pipe

Description : A pitot tube is used to measure the (A) Velocity of flow at the required point in a pipe (B) Pressure difference between two points in a pipe (C) Total pressure of liquid flowing in a pipe (D) Discharge through a pipe

Last Answer : Answer: Option A

01. In a convergent mouthpiece, the absolute pressure head at vena contracta is the same as that of the atmosphere. A) True B) False

Description : 01. In a convergent mouthpiece, the absolute pressure head at vena contracta is the same as that of the atmosphere. A) True B) False

Last Answer : A

A pipe of length more than double the diameter of orifice fitted externally or internally to the orifice is called a (A) Notch (B) Weir (C) Mouthpiece (D) Nozzle

Description : A pipe of length more than double the diameter of orifice fitted externally or internally to the orifice is called a (A) Notch (B) Weir (C) Mouthpiece (D) Nozzle

Last Answer : Answer: Option C

In a short cylindrical external mouthpiece, the vena contracta occurs at a distance __________ the diameter of the orifice from the outlet of orifice. (A) Equal to (B) One-fourth (C) One-third (D) One-half

Description : In a short cylindrical external mouthpiece, the vena contracta occurs at a distance __________ the diameter of the orifice from the outlet of orifice. (A) Equal to (B) One-fourth (C) One-third (D) One-half

Last Answer : Answer: Option B

For perfectly elastic bodies the value of the coefficient of restitution is a.0.707 b.0.5 c.1 d.0.25 e.Zero

Description : For perfectly elastic bodies the value of the coefficient of restitution is a.0.707 b.0.5 c.1 d.0.25 e.Zero

Last Answer : a. 0.707

In measuring critical speed of shaft experiment, it was found that the frequency ratio is 0.707 when the eccentricity is 0.05 m. what will be the displacement of the system. A. 0.05 m B. 0.005 m C. 0.5 m D. Infinite

Description : In measuring critical speed of shaft experiment, it was found that the frequency ratio is 0.707 when the eccentricity is 0.05 m. what will be the displacement of the system. A. 0.05 m B. 0.005 m C. 0.5 m D. Infinite

Last Answer : A. 0.05 m

Find the ratio of refractive index of medium 2 to that of medium 1, when the Brewster angle is 60 degree. a) 0.707 b) 1.5 c) 0.866 d) 1.732

Description : Find the ratio of refractive index of medium 2 to that of medium 1, when the Brewster angle is 60 degree. a) 0.707 b) 1.5 c) 0.866 d) 1.732

Last Answer : d) 1.732

Convert the point (3,4,5) from Cartesian to spherical coordinates a) (7.07,450,530) b) (0.707,450,530) c) (7.07,540,630) d) (0.707,540,630)

Description : Convert the point (3,4,5) from Cartesian to spherical coordinates a) (7.07,450,530) b) (0.707,450,530) c) (7.07,540,630) d) (0.707,540,630)

Last Answer : a) (7.07,450,530)

Binance**Toll-Free** Number @1//855//922//2312@ Get Instant Resolution And Help Immediate Action Call At 8559222312 Instant help?

Description : Binance**Toll-Free** Number @1//855//922//2312@ Get Instant Resolution And Help Immediate Action Call At 8559222312 Instant help?

Last Answer : BinanceToll-Free Number @1//855//922//2312@ Get Instant Resolution And Help Immediate Action Call At 8559222312 Instant help. BinanceToll-Free Number @1//855//922//2312@ Get Instant Resolution And ... Immediate Action Call At 8559222312 Instant help.BinanceToll-Free Number @1//855//922//2312@ Ge

❅Binance៛Customer-Service៛Number № ☨1855☇922☇2312☨ Get Reliable Solution Contact BINANCE Number US Top Most Binance Toll-Free Number 855-922-2312 Instant Solution?

Description : ❅Binance៛Customer-Service៛Number № ☨1855☇922☇2312☨ Get Reliable Solution Contact BINANCE Number US Top Most Binance Toll-Free Number 855-922-2312 Instant Solution?

Last Answer : ❅Binance៛Customer-Service៛Number № ☨1855☇922☇2312☨ Get Reliable Solution Contact BINANCE Number US Top Most Binance Toll-Free Number 855-922-2312 Instant Solution? ❅Binance៛Customer-Service៛Number № ☨1855☇922☇2312☨ ... Contact BINANCE Number US Top Most Binance Toll-Free Number 855-922-2312

Binance SUPPORT Helpline US Number ^*&$%^ (855~922~2312) $%^$& Get Reliable Solution Binance Toll-Free Number 8559222312 get resolution?

Description : Binance SUPPORT Helpline US Number ^*&$%^ (855~922~2312) $%^$& Get Reliable Solution Binance Toll-Free Number 8559222312 get resolution?

Last Answer : Binance SUPPORT Helpline US Number ^&$%^ (855~922~2312) $%^$& Get Reliable Solution Binance Toll-Free Number 8559222312 get resolution? Binance SUPPORT Helpline US Number ^&$%^ (855~922~2312) $%^$& ... US Number ^&$%^ (855~922~2312) $%^$& Get Reliable Solution Binance Toll-Free Number 8559222312

How do you put 0.077 0.777 0.707 0.77 0.7?

Description : How do you put 0.077 0.777 0.707 0.77 0.7?

Last Answer : What is the answer ?

What is the word form for 0.707?

Description : What is the word form for 0.707?

Last Answer : Need answer

How does the gain of a parabolic dish type antenna change when the operating frequency is doubled? A. Gain does not change B. Gain is multiplied by 0.707 C. Gain increases 6 dB D. Gain increases 3 dB

Description : How does the gain of a parabolic dish type antenna change when the operating frequency is doubled? A. Gain does not change B. Gain is multiplied by 0.707 C. Gain increases 6 dB D. Gain increases 3 dB

Last Answer : C. Gain increases 6 dB

Find the acceptance angle of a material which has a numerical aperture of 0.707 in air. a) 30 b) 60 c) 45 d) 90

Description : Find the acceptance angle of a material which has a numerical aperture of 0.707 in air. a) 30 b) 60 c) 45 d) 90

Last Answer : c) 45