Describe the construction & working of a Lead storage battery.

Describe the construction & working of a Lead storage battery.
by

1 Answer

Answer :

Ans : Lead Storage Battery :
Lead storage battery is used in automobiles. It is a secondary battery & is a reversible cell which can be restored to it original condition. The battery could be used through repeated cycles of discharging & recharging.
Construction :
In lead storage battery anodes are the lead alloy & cathodes are made up of red lead dioxide(PbO2).
The electrolyte is dilute sulphuric acid having concentration.
by

Related questions

Explain the construction and working of Lead acid storage cell with the help of diagram.

Description : Explain the construction and working of Lead acid storage cell with the help of diagram.

Last Answer : Construction  i)A group of lead plates packed with spongy lead serves as anode (negative electrode). ii) Another group of lead plates bearing lead dioxide serve as cathode (positive electrode).The two ... 38% ( by mass) of H2SO4 of density about 1.2 g/ml which serve as electrolyte.

The plates of a NiCad storage battery are made of ________. A. potassium hydroxide with a small amount of sulfuric acid B. lead and lead peroxide C. silver oxide and lead sulfate D. combinations of nickel powder and nickel & cadmium salts

Description : The plates of a NiCad storage battery are made of ________. A. potassium hydroxide with a small amount of sulfuric acid B. lead and lead peroxide C. silver oxide and lead sulfate D. combinations of nickel powder and nickel & cadmium salts

Last Answer : Answer: D

Describe the construction & working of a dry cell ( primary cell ).

Description : Describe the construction & working of a dry cell ( primary cell ).

Last Answer : Ans : Dry Cell : A primary voltaic cell in which the electrolyte is a paste in known as a dry cell. A chemical reaction within the battery creates an electrical charge that flows from ... on the Zn container & the electrons move from Zn electrode to carbon electrode through the external circuit.

When a lead storage battery is discharged - (1) SO2 is evolved (2) Lead sulphate is consumed (3) Lead is formed (4) Sulphuric acid is consumed

Description : When a lead storage battery is discharged - (1) SO2 is evolved (2) Lead sulphate is consumed (3) Lead is formed (4) Sulphuric acid is consumed

Last Answer : (4) Sulphuric acid is consumed Explanation: Lead storage battery was invented by French physicist Gaston Plante in 1859. In the discharged state both the positive and negative plates become lead sulphate and the electrolyte loses much of its dissolved sulphuric acid and becomes primarily water.

Which of the following acids serves as an electrolyte in a lead storage battery? (1) Sulphuric acid (2) Lactic acid (3) Hydrochloric acid (4) Nitric acid

Description : Which of the following acids serves as an electrolyte in a lead storage battery? (1) Sulphuric acid (2) Lactic acid (3) Hydrochloric acid (4) Nitric acid

Last Answer : (1) Sulphuric acid Explanation: Dilute sulfuric acid (H2SO4) serves as the electrolyte in a lead-acid battery. Dilute sulfuric acid used for lead acid battery has ratio (to water) of 3:1 other components of the battery include: Lead peroxide (PbO2) and Sponge lead (Pb).

The cathode of a lead storage battery is made up of – (1) Zinc (2) Lead (3) Lead oxide (4) Manganese dioxide

Description : The cathode of a lead storage battery is made up of – (1) Zinc (2) Lead (3) Lead oxide (4) Manganese dioxide

Last Answer : (2) Lead Explanation: Lead-acid batteries, invented in 1859 by French physicist Gaston Plante, are the oldest type of rechargeable battery. Despite having a very low energy-to-weight ratio ... attractive for use in motor vehicles to provide the high current required by automobile starter motors.

Which acid is used in Lead storage battery? (1) Sulphuric acid (2) Nitric acid (3) Hydrochloric acid (4) Acetic acid

Description : Which acid is used in Lead storage battery? (1) Sulphuric acid (2) Nitric acid (3) Hydrochloric acid (4) Acetic acid

Last Answer : Sulphuric acid

Which of the following acids serves as an electrolyte in a lead storage battery? (1) Sulphuric acid (2) Lactic acid (3) Hydrochloric acid (4) Nitric acid

Description : Which of the following acids serves as an electrolyte in a lead storage battery? (1) Sulphuric acid (2) Lactic acid (3) Hydrochloric acid (4) Nitric acid

Last Answer : Sulphuric acid

When a lead storage battery is discharged, (1) SO2 is evolved (2) Lead sulphate is consumed (3) Lead is formed (4) Sulphuric acid is consumed

Description : When a lead storage battery is discharged, (1) SO2 is evolved (2) Lead sulphate is consumed (3) Lead is formed (4) Sulphuric acid is consumed 

Last Answer : Sulphuric acid is consumed

The cathode of a lead storage battery is made up of (1) Zinc (2) Lead (3) Lead oxide (4) Manganese dioxide

Description : The cathode of a lead storage battery is made up of (1) Zinc (2) Lead (3) Lead oxide (4) Manganese dioxide

Last Answer : Lead

The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Description : The preferred material of construction for storage tanks for 98% sulphuric acid is (A) Aluminium (B) Lead (C) Stainless steel 316 (D) Mild steel

Last Answer : (B) Lead

The acid used in lead storage battery is`

Description : The acid used in lead storage battery is`

Last Answer : The acid used in lead storage battery is` A. Nitric acid B. Sulphuric acid C. Hydrochloric acid D. Phosphoric acid

From the standpoint of safety, you should never allow salt water to enter a leadacid storage battery or come in contact with sulfuric acid because ______________. A. the resulting gas is extremely flammable B. the resulting gas is a respiratory irritant that can be fatal C. the primary constituent, sodium, reacts lethally with lead peroxide D. combining salt water with lead-acid creates an invisible gas resulting in severe corrosion

Description : From the standpoint of safety, you should never allow salt water to enter a leadacid storage battery or come in contact with sulfuric acid because ______________. A. the resulting gas is ... peroxide D. combining salt water with lead-acid creates an invisible gas resulting in severe corrosion

Last Answer : Answer: B

If violent gassing occurs when a lead-acid storage battery is first placed on charge, the _____________. A. battery must be given an emergency charge B. charging rate is too low C. charging rate is too high D. specific gravity of the electrolyte solution is too low

Description : If violent gassing occurs when a lead-acid storage battery is first placed on charge, the _____________. A. battery must be given an emergency charge B. charging rate is too low C. charging rate is too high D. specific gravity of the electrolyte solution is too low

Last Answer : Answer: C

When the electrolyte level of a lead-acid storage battery has decreased due to normal evaporation, the level should be reestablished by adding _____________. A. distilled water only B. sulfuric acid only C. a weak solution of sulfuric acid and distilled water D. a strong solution of sulfuric acid and distilled water

Description : When the electrolyte level of a lead-acid storage battery has decreased due to normal evaporation, the level should be reestablished by adding _____________. A. distilled water only B. sulfuric acid ... of sulfuric acid and distilled water D. a strong solution of sulfuric acid and distilled water

Last Answer : Answer: A

When troubleshooting a lead-acid storage battery, a weak or dead cell is best detected by _________________. A. measuring and comparing all cells' specific gravity B. taking an open circuit voltage test of individual cells C. visually inspecting the electrolyte levels of each cell D. taking each cell's temperature with a calibrated mercury thermometer

Description : When troubleshooting a lead-acid storage battery, a weak or dead cell is best detected by _________________. A. measuring and comparing all cells' specific gravity B. taking an open circuit ... electrolyte levels of each cell D. taking each cell's temperature with a calibrated mercury thermometer

Last Answer : Answer: A

Which of the processes listed occurs during the charging of a lead-acid storage battery? A. Negative plates change to lead peroxide. B. Positive plates change to lead peroxide. C. Both plates change to lead peroxide. D. Both plates change to lead sulfate.

Description : Which of the processes listed occurs during the charging of a lead-acid storage battery? A. Negative plates change to lead peroxide. B. Positive plates change to lead peroxide. C. Both plates change to lead peroxide. D. Both plates change to lead sulfate.

Last Answer : Answer: B

During discharge of a lead-acid storage battery, which of the following actions occurs? A. The acid becomes stronger. B. Both plates change chemically to ammonium chloride. C. The acid becomes weaker. D. Hydrogen gas is liberated.

Description : During discharge of a lead-acid storage battery, which of the following actions occurs? A. The acid becomes stronger. B. Both plates change chemically to ammonium chloride. C. The acid becomes weaker. D. Hydrogen gas is liberated.

Last Answer : Answer: C

Which of the following activities occurs during the charging process of a lead-acid storage battery? A. The specific gravity of the acid increases. B. Both plates change chemically to lead sulfate. C. The specific gravity of the acid decreases. D. Hydrogen gas is absorbed.

Description : Which of the following activities occurs during the charging process of a lead-acid storage battery? A. The specific gravity of the acid increases. B. Both plates change chemically to lead sulfate. C. The specific gravity of the acid decreases. D. Hydrogen gas is absorbed.

Last Answer : Answer: A

When mixing electrolyte for a lead-acid storage battery, ______________. A. stirring should always be avoided B. a lead container should always be used C. always pour the water into the acid D. always pour the acid into the water

Description : When mixing electrolyte for a lead-acid storage battery, ______________. A. stirring should always be avoided B. a lead container should always be used C. always pour the water into the acid D. always pour the acid into the water

Last Answer : Answer: D

When mixing electrolyte for a lead-acid storage battery, you should pour the ___________. A. distilled water into the acid in a zinc-plated container B. distilled water into the acid in a glass container C. acid into the distilled water in a zinc-plated container D. acid into distilled water in a glass container

Description : When mixing electrolyte for a lead-acid storage battery, you should pour the ___________. A. distilled water into the acid in a zinc-plated container B. distilled water into the acid in a glass ... into the distilled water in a zinc-plated container D. acid into distilled water in a glass container

Last Answer : Answer: D

Local action in a dry-cell, or lead-acid storage battery is the process whereby ________________. A. hydrogen gas is liberated B. the electrolyte compensates for overcharging C. potassium hydroxide absorbs carbon dioxide from the air D. the battery becomes discharged without being connected to a load

Description : Local action in a dry-cell, or lead-acid storage battery is the process whereby ________________. A. hydrogen gas is liberated B. the electrolyte compensates for overcharging C. potassium hydroxide ... carbon dioxide from the air D. the battery becomes discharged without being connected to a load

Last Answer : Answer: D

The state of charge of a lead acid storage battery is best indicated by the _____________. A. testing of the individual cell voltages B. ampere hour capacity of the battery C. specific gravity of the electrolyte D. total cell voltages

Description : The state of charge of a lead acid storage battery is best indicated by the _____________. A. testing of the individual cell voltages B. ampere hour capacity of the battery C. specific gravity of the electrolyte D. total cell voltages

Last Answer : Answer: C

The electrolyte in a lead-acid storage battery consists of distilled water and _____________. A. hydrogen chloride B. calcium chloride C. sulfuric acid D. muriatic acid

Description : The electrolyte in a lead-acid storage battery consists of distilled water and _____________. A. hydrogen chloride B. calcium chloride C. sulfuric acid D. muriatic acid

Last Answer : Answer: C

Which of the listed battery charging circuits is used to maintain a wet-cell, lead-acid, storage battery in a fully charged state during long periods of disuse? A. Normal charging circuit B. Quick charging circuit C. Trickle charging circuit D. High ampere charging circuit

Description : Which of the listed battery charging circuits is used to maintain a wet-cell, lead-acid, storage battery in a fully charged state during long periods of disuse? A. Normal charging circuit B. Quick charging circuit C. Trickle charging circuit D. High ampere charging circuit

Last Answer : Answer: C

The acid used in lead storage battery?

Description : The acid used in lead storage battery?

Last Answer : Sulphuric Acid

The storage battery generally used in electric power station is A. Nickel-cadmium battery B. Zinc carbon battery C. Lead-acid battery D. None of the above

Description : The storage battery generally used in electric power station is A. Nickel-cadmium battery B. Zinc carbon battery C. Lead-acid battery D. None of the above

Last Answer : C. Lead-acid battery

The storage battery generally used in electric power station is A] nickel-cadmium battery B] zinc-carbon battery C] lead-acid battery D] None of the above

Description : The storage battery generally used in electric power station is A] nickel-cadmium battery B] zinc-carbon battery C] lead-acid battery D] None of the above

Last Answer : C] lead-acid battery

Describe construction and working of double cone blender.

Description : Describe construction and working of double cone blender.

Last Answer : Diagram: Construction: Double cone blender is made up of stainless steel and is available in different capacity ranging from 5 kg to 200 kg or even more. The efficiency of ... to produce shearing action and design is useful for mixing powders of different densities in small quantities.

Describe construction and working of equipment used for moist heat sterilization.

Description : Describe construction and working of equipment used for moist heat sterilization. 

Last Answer : Moist heat sterilizer or Autoclave:  Diagram:  Construction:  It consists of a string metallic chamber usually made of stainless steel. It has a cover fitted with a steam vent, pressure gauze ... whole of the steam is removed, the lid is opened and the sterilized material is taken out.

Describe the construction and working of evaporating pan with neat diagram.

Description : Describe the construction and working of evaporating pan with neat diagram.

Last Answer : Construction:  i. It consists of a hemispherical pan made from copper or stainless steel and surrounded by a steam jacket. ii. Hemispherical shape provides large surface area for evaporation. iii. ... . iv. After evaporation remove the product from product outlet. Diagram:

Describe the principle, construction, working and uses of cyclone separator.

Description : Describe the principle, construction, working and uses of cyclone separator.

Last Answer : Principle: Centrifugal force   Construction-  1) Cyclone separator is size separation device 2) It consists of a cylindrical vessel with a conical base. 3) The upper part of the vessel is fitted ... the suspension of a solid in gas 2. It can be used with liquid suspension of solid

Describe with neat sketch the construction and working of surface condenser

Description : Describe with neat sketch the construction and working of surface condenser

Last Answer : Construction- It consists of horizontal cast iron cylindrical vessel pack with tubes, through which the cooling water flows. The ends of the condenser are cut off by vertical perforated type plates into ... ; the secondary function of condenser is to supply pure and hot feed water to boiler.  

Describe the construction and working principle of single phase AC motor.

Description : Describe the construction and working principle of single phase AC motor.

Last Answer : construction and working principle of single phase AC motor : Single phase induction motors have a phase distributed winding on the stator and a squirrel cage short-circuited winding on the rotor. ... is the basic working principle of induction motor of either type, single phase of 3 phase.

Describe the construction and working principle of auto transformer.

Description : Describe the construction and working principle of auto transformer.

Last Answer : An auto transformer has single winding which is used as primary and secondary winding. This winding is wound on laminated enameled magnetic core.   OR   As shown in fig. 1 the input is ... this construction we can step up the voltage. So this transformer known as step up autotransformer.  

Describe the construction and working of of thermostat valve used in cooling system.

Description : Describe the construction and working of of thermostat valve used in cooling system.

Last Answer : Bellows type thermostat valve  Construction: It consists of metallic bellows filled with some volatile liquid like acetone, alcohol or ether which boils between 75-850C. When after start the engine is ... of plunger opens a valve in the thermostat to allow coolant to flow through the radiator. 

Describe the construction and working of D-MPFI and L-MPFI with help of neat sketch.

Description : Describe the construction and working of D-MPFI and L-MPFI with help of neat sketch.

Last Answer : D-LMFI System: It is Manifold fuel injection system.In this type, the vacuum in the intake manifold and volume of air by its density are sensed in this type of MPFI system .As air enters into ... intake manifold , the air flow sensor measures the amount of air and sends information to ECU.

Describe construction and working of TBI system with suitable sketch.

Description : Describe construction and working of TBI system with suitable sketch.

Last Answer : Construction and working of TBI system: Throttle Body Injection is an electronically controlled injection system in which an electronic fuel injector injects the fuel intermittently in to the intake manifold ... to calculate the triggering signals for the injectors and other system actuators.

Draw construction of PVC gang capacitor and describe it’s working.

Description : Draw construction of PVC gang capacitor and describe it’s working.

Last Answer :  Diagram Working  In plastic core capacitor, poly-vinyl chloride (PVC) type of plastic film is used as dielectric between the fixed & movable vanes instead of air. This increases ... & results in great reduction of size of capacitor in comparison with the air core capacitor.

Describe working of schottky diode with neat construction

Description : Describe working of schottky diode with neat construction

Last Answer : Applications: 1) RF mixer and Detector Diode. 2) Power Rectifier 3) Voltage Clamping 4) Stand-alone photovoltaic system in order to prevent batteries from discharging purpose for the ... . 7) Low Voltage Power Supply Circuits. 8) To rectify very high frequency signals.

Describe the working principle of LED with neat construction.

Description : Describe the working principle of LED with neat construction.

Last Answer : Working Diagram Working:-When the junction is forward - biased the electron in the n-region combines with the holes. These free electrons reside in the conduction band and at the ... . While returning back, the recombining electrons give away the excess energy in the form of light

Describe construction and working of H2-O2 fuel cell.

Description : Describe construction and working of H2-O2 fuel cell.

Last Answer : Construction :- )One of the simplest & most successful fuel cell is hydrogen oxygen fuel cell. ii) It consists essentially of an electrolytic solution such as 25% KOH or NaOH ... . Hydrogen & oxygen gases are bubbled through the anode & cathode compartment respectively.

Describe construction and working of Daniel cell.

Description : Describe construction and working of Daniel cell.

Last Answer : Answer : Construction: It consists of zinc electrode dipped in ZnSO4 Solution & Copper electrode dipped in CuSO4 solution. The two solutions are separated by a porous pot. The two solutions can seep ... as Cu & hence copper electrode becomes positively charged. The emf of cell is 1.1 volt.

Describe construction and working of dry cell.

Description : Describe construction and working of dry cell.

Last Answer : Construction: It consists of zinc container (vessel) which acts as an anode. Cathode is a Graphite rod. It acts as inert electrode. The Graphite rod is surrounded by a paste of MnO2 (Manganese dioxide) ... Working At zinc anode: - Dissolution of zinc electrode to form zinc ions

Describe construction and working of hydrogen oxygen fuel cell.

Description : Describe construction and working of hydrogen oxygen fuel cell.

Last Answer : Construction:- 1. It consists essentially of an electrolytic solution such as 25% KOH or NaOH solution, & two inert porous electrodes (like porous carbon) containing suitable catalyst. ... & oxygen gases are bubbled through the anode & cathode compartment respectively.

Describe only construction and working of pipe in pipe heat exchanger. State it’s two applications.

Description : Describe only construction and working of pipe in pipe heat exchanger. State it’s two applications.

Last Answer : Pipe Heat Exchanger: Construction and Working : In Pipe heat exchanger design, an important factor is the type of flow pattern in the heat exchanger. A pipe heat exchanger will ... more compact. Application : Oil refinery industries , Waste water management, Refrigeration system  

Describe construction and working of Dead Weight Tester used in pressure calibration.

Description : Describe construction and working of Dead Weight Tester used in pressure calibration.

Last Answer : Dead weight tester:  Construction: It consists of a very accurately machined, bored and finished piston which is inserted into a close-fitting cylinder. The cross sectional areas of ... within the cylinder when the fluid gauge pressure equals the dead weight divided by the piston area.  

Describe construction and working of Resistance Temperature Detector (RTD).

Description : Describe construction and working of Resistance Temperature Detector (RTD).

Last Answer : RTD:  Construction and working: Resistance thermometer bulbs consist of a coil of fine wire wound or in a frame of insulating material. The resistance wire itself must be homogeneous in order to ... surrounding it. Thus RTD is used to measure temperature in terms of change in resistance.

Describe the construction and working of two pass flow surface condenser also write it’s function and location in steam power plant.

Description : Describe the construction and working of two pass flow surface condenser also write it’s function and location in steam power plant.

Last Answer : Construction: It consists of horizontal cast iron cylindrical vessel pack with tubes, through which the cooling water flows. The ends of the condenser are cut off by vertical perforated type plates ... hot feed water to boiler. Location in steam power plant- between turbine and feed pump 

Draw the construction of magnetron and describe it’s working.

Description : Draw the construction of magnetron and describe it’s working.

Last Answer : Working/Operation: 1. Now assume RF oscillations are initiated due to some noise transient within the magnetron, the oscillations will be sustained by device operation. 2. Self- ... these favored electrons imparts enough energy to the RF oscillations so that they are sustained.