04. All the gases are considered to have compressible flow and all the liquids are considered to have incompressible flow. A) Correct B) Incorrect

04. All the gases are considered to have compressible flow and all the liquids are considered to
have incompressible flow.
A) Correct
B) Incorrect
by

1 Answer

Answer :

A
by

Related questions

Which of the following statement is correct? (A) In a compressible flow, the volume of the flowing liquid changes during the flow (B) A flow, in which the volume of the flowing liquid does not change, is called incompressible flow (C) When the particles rotate about their own axes while flowing, the flow is said to be rotational flow (D) All of the above

Description : Which of the following statement is correct? (A) In a compressible flow, the volume of the flowing liquid changes during the flow (B) A flow, in which the volume of the flowing liquid does not change, ... their own axes while flowing, the flow is said to be rotational flow (D) All of the above

Last Answer : Answer: Option D

A flow in which the volume of a fluid and its density does not change during the flow is called _________ flow. (A) Incompressible (B) Compressible (C) Viscous (D) None of these

Description : A flow in which the volume of a fluid and its density does not change during the flow is called _________ flow. (A) Incompressible (B) Compressible (C) Viscous (D) None of these

Last Answer : Answer: Option A

A straight line is obtained on plotting reciprocal of filtration rate vs. the volume of filtrate for __________ flow of filtrate. (A) Compressible cakes and laminar (B) Incompressible cake and laminar (C) Compressible cake and turbulent (D) Incompressible cake and turbulent

Description : A straight line is obtained on plotting reciprocal of filtration rate vs. the volume of filtrate for __________ flow of filtrate. (A) Compressible cakes and laminar (B) Incompressible cake and laminar (C) Compressible cake and turbulent (D) Incompressible cake and turbulent

Last Answer : (B) Incompressible cake and laminar

Bernoulli's equation for fluid flow is derived following certain assumptions. Out of the assumptions listed below, which set of assumptions is used in derivation of Bernoulli's equation? A. Fluid flow is frictionless & irrotational. B. Fluid flow is steady. C. Fluid flow is uniform & turbulent. D. Fluid is compressible. E. Fluid is incompressible. (A) A, C, D (B) B, D, E (C) A, B, E (D) A, D, E

Description : Bernoulli's equation for fluid flow is derived following certain assumptions. Out of the assumptions listed below, which set of assumptions is used in derivation of Bernoulli's equation? A. Fluid flow is frictionless & irrotational. B. Fluid flow is ... A, C, D (B) B, D, E (C) A, B, E (D) A, D, E

Last Answer : (C) A, B, E

If in a flow field, between any two points, then the flow must be (A) Steady, incompressible, irrotational (B) Steady, compressible, irrotational (C) Steady, compressible and along a streamline

Description : If in a flow field, between any two points, then the flow must be (A) Steady, incompressible, irrotational (B) Steady, compressible, irrotational (C) Steady, compressible and along a streamline

Last Answer : (A) Steady, incompressible, irrotational

Potential flow is the flow of (A) Compressible fluids with shear (B) Compressible fluids with no shear (C) Incompressible fluids with shear (D) Incompressible fluids with no shear

Description : Potential flow is the flow of (A) Compressible fluids with shear (B) Compressible fluids with no shear (C) Incompressible fluids with shear (D) Incompressible fluids with no shear

Last Answer : (D) Incompressible fluids with no shear

Cohesive soils are generally (A) Plastic and also compressible (B) Elastic and also compressible (C) Plastic but incompressible (D) None of these

Description : Cohesive soils are generally (A) Plastic and also compressible (B) Elastic and also compressible (C) Plastic but incompressible (D) None of these

Last Answer : (A) Plastic and also compressible

Water is __________ liquid. (A) A compressible (B) An incompressible (C) Both A and B (D) None of these

Description : Water is __________ liquid. (A) A compressible (B) An incompressible (C) Both A and B (D) None of these

Last Answer : Answer: Option B

A fluid is said to be ideal, if it is (A) Incompressible (B) Viscous and incompressible (C) Inviscous and compressible (D) Inviscous and incompressible

Description : A fluid is said to be ideal, if it is (A) Incompressible (B) Viscous and incompressible (C) Inviscous and compressible (D) Inviscous and incompressible

Last Answer : Answer: Option D

The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above

Description : The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above

Last Answer : Answer: Option D

Mach number is defined as the ratio of the local flow velocity to the sonic velocity in the fluid. For what value of Mach number, the gases are considered incompressible? (A) < 0.3 (B) > 3 (C) 50 (D) 1

Description : Mach number is defined as the ratio of the local flow velocity to the sonic velocity in the fluid. For what value of Mach number, the gases are considered incompressible? (A) < 0.3 (B) > 3 (C) 50 (D) 1

Last Answer : (A) < 0.3

A fluid element has a velocity V = -y 2 . xi + 2yx 2 . j. The motion at (x, y) = (1/√2, 1) is (A) Rotational and incompressible (B) Rotational and compressible (C) Irrotational and compressible (D) Irrotational and incompressible

Description : A fluid element has a velocity V = -y 2 . xi + 2yx 2 . j. The motion at (x, y) = (1/√2, 1) is (A) Rotational and incompressible (B) Rotational and compressible (C) Irrotational and compressible (D) Irrotational and incompressible

Last Answer : (B) Rotational and compressible

The energy equation, E + (p/ρ) + (V 2 /2g) + gZ = constant (E = internal energy/mass), is applicable to (A) Perfect gases only (B) Isothermal flow of gases (C) Adiabatic unsteady flow of gases (D) All compressible fluids

Description : The energy equation, E + (p/ρ) + (V 2 /2g) + gZ = constant (E = internal energy/mass), is applicable to (A) Perfect gases only (B) Isothermal flow of gases (C) Adiabatic unsteady flow of gases (D) All compressible fluids

Last Answer : (D) All compressible fluids

Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) A wet side compacted soil is more compressible than a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Description : Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) ... a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Last Answer : (A) Compaction has no effect on the structure of a soil

A point, in a compressible flow where the velocity of fluid is zero, is called (A) Critical point (B) Vena contractaC) Stagnation point (D) None of these

Description : A point, in a compressible flow where the velocity of fluid is zero, is called (A) Critical point (B) Vena contracta C) Stagnation point (D) None of these

Last Answer : Answer: Option C

Which of the following is generally considered as opaque surface towards radiations? (A) Gases (B) Solids (C) Liquids (D) Both (B) and (C)

Description : Which of the following is generally considered as opaque surface towards radiations? (A) Gases (B) Solids (C) Liquids (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the total volume to the volume of voids in the bed (C) Mach number in an incompressible fluid is always unity (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Description : Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the ... the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Last Answer : (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

For very great pressures, viscosity of moss gases and liquids (A) Remain same (B) Increases (C) Decreases (D) Shows erratic behaviou

Description : For very great pressures, viscosity of moss gases and liquids (A) Remain same (B) Increases (C) Decreases (D) Shows erratic behaviour

Last Answer : Answer: Option D

Hydrometer is used to determine (A) Specific gravity of liquids (B) Specific gravity of solids (C) Specific gravity of gases (D) Relative humidity

Description : Hydrometer is used to determine (A) Specific gravity of liquids (B) Specific gravity of solids (C) Specific gravity of gases (D) Relative humidity

Last Answer : Answer: Option A

Hot wire anemometer is used to measure (A) Pressure in gases (B) Liquid discharge (C) Pressure in liquids (D) Gas velocities

Description : Hot wire anemometer is used to measure (A) Pressure in gases (B) Liquid discharge (C) Pressure in liquids (D) Gas velocities

Last Answer : Answer: Option D

Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by the force of adhesion between liquid molecules c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Description : Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by ... it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Last Answer : c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions

Pick up the incorrect statement from the following: A. Septic tanks are horizontal continuous flow type of sedimentation tanks B. Septic tanks are generally provided a detention period of 12 to 36 hours C. Septic tanks are completely covered and high vent shafts are provided for the escape of foul gases D. None of these

Description : Pick up the incorrect statement from the following: A. Septic tanks are horizontal continuous flow type of sedimentation tanks B. Septic tanks are generally provided a detention period of 12 to 36 hours C ... covered and high vent shafts are provided for the escape of foul gases D. None of these

Last Answer : ANS: D

Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. (du/dy) n the value of 'n' for pseudoplastic and Dilatant fluid are < 1 and >1 respectively (C) Shear stress for Newtonian fluid is proportional to the rate of shear in the direction perpendicular to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Description : Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. ... to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Last Answer : (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

The Mach number for hypersonic flow of compressible fluid is (A) 1 (B) > 1 (C) > 4 (D) < 2

Description : The Mach number for hypersonic flow of compressible fluid is (A) 1 (B) > 1 (C) > 4 (D) < 2

Last Answer : (C) > 4

Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Upto what value of 'Mach number', a fluid may be considered as incompressible? (A) 0.03 (B) 0.3 (C) 3(D) 10

Description : Upto what value of 'Mach number', a fluid may be considered as incompressible? (A) 0.03 (B) 0.3 (C) 3 (D) 10

Last Answer : (D) 10

What is constant for a substance that is considered “incompressible”?  A. Specific volume of density  B. Pressure  C. Temperature  D. All of the above

Description : What is constant for a substance that is considered “incompressible”?  A. Specific volume of density  B. Pressure  C. Temperature  D. All of the above

Last Answer : Specific volume of density

For one dimensional flow of an incompressible fluid in unsteady state in x-direction, the continuity equation is given by (A) ∂u/∂x = 0 (B) ∂(ρu)/∂x = 0 (C) (∂u/∂x) = - (∂ρ/∂t) (D) ∂ρ/∂t = 0

Description : For one dimensional flow of an incompressible fluid in unsteady state in x-direction, the continuity equation is given by (A) ∂u/∂x = 0 (B) ∂(ρu)/∂x = 0 (C) (∂u/∂x) = - (∂ρ/∂t) (D) ∂ρ/∂t = 0

Last Answer : (A) ∂u/∂x = 0

Which of the following assumptions enables the Euler's equation of motion to be integrated? (A) The fluid is incompressible (B) The fluid is non-viscous (C) The continuity equation is satisfied (D) The flow is rotational and incompressible

Description : Which of the following assumptions enables the Euler's equation of motion to be integrated? (A) The fluid is incompressible (B) The fluid is non-viscous (C) The continuity equation is satisfied (D) The flow is rotational and incompressible

Last Answer : (A) The fluid is incompressible

Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal to that leaving the Venturimeter(B) Discharge of fluid through a Venturimeter depends upon the gagedifference irrespective of the orientation of Venturimeter(C) Venturimeter occupies less space than an orificemeter(D) Venturimeter incurs less power loss compared to an equivalentorificemeter

Description : Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal ... than an orificemeter (D) Venturimeter incurs less power loss compared to an equivalent orificemeter

Last Answer : (C) Venturimeter occupies less space than an orificemeter

In a fully turbulent flow (Re > 10 5 ) in a pipe of diameter 'd', for a constant pressure gradient, the dependence of volumetric flow rate of an incompressible fluid is (A) d(B) d2(C) d2.5(D) d

Description : In a fully turbulent flow (Re > 10 5 ) in a pipe of diameter 'd', for a constant pressure gradient, the dependence of volumetric flow rate of an incompressible fluid is (A) d (B) d 2 (C) d 2.5 (D) d

Last Answer : (C) d 2.5

Where does the maximum stress occur in case of laminar flow of incompressible fluid in a closed conduit of diameter 'd'? (A) At the centre (B) At d/4 from the wall (C) At the wall (D) At d/8 from the wall

Description : Where does the maximum stress occur in case of laminar flow of incompressible fluid in a closed conduit of diameter 'd'? (A) At the centre (B) At d/4 from the wall (C) At the wall (D) At d/8 from the wall

Last Answer : (C) At the wall

In an incompressible flow of fluid, the fluid (A) Temperature remains constant (B) Compressibility is greater than zero (C) Density does not change with pressure & temperature (D) Is frictionless

Description : In an incompressible flow of fluid, the fluid (A) Temperature remains constant (B) Compressibility is greater than zero (C) Density does not change with pressure & temperature (D) Is frictionless

Last Answer : (C) Density does not change with pressure & temperature

__________ flow means the flow of incompressible fluid with no shear. (A) Potential (B) Streamline (C) Creep (D) Boundary layer

Description : __________ flow means the flow of incompressible fluid with no shear. (A) Potential (B) Streamline (C) Creep (D) Boundary layer

Last Answer : (A) Potential

For turbulent flow of an incompressible fluid through a pipe, the flow rate ‘Q’ is proportional to (Δ P)n, where ΔP is the pressure drop. The value of exponent 'n' is (A) 1 (B) 0 (C) < 1 (D) > 1

Description : For turbulent flow of an incompressible fluid through a pipe, the flow rate ‘Q’ is proportional to (Δ P)n, where ΔP is the pressure drop. The value of exponent 'n' is (A) 1 (B) 0 (C) < 1 (D) > 1

Last Answer : (C) < 1

Bernoulli's equation is not applicable, when the flow is (A) Irrotational (B) Incompressible(C) Viscous(D) All (A), (B) & (C

Description : Bernoulli's equation is not applicable, when the flow is (A) Irrotational (B) Incompressible (C) Viscous (D) All (A), (B) & (C

Last Answer : (D) All (A), (B) & (C)

The ultimate Settlement of a soil is directly proportional to: (A) Depth of the compressible soil strata (B) Compressive index (C) Both (a) and (b) (D) None of these

Description : The ultimate Settlement of a soil is directly proportional to: (A) Depth of the compressible soil strata (B) Compressive index (C) Both (a) and (b) (D) None of these

Last Answer : (D) None of these

17. The specific weight of compressible fluids does not remain constant. A) True B) False

Description : 17. The specific weight of compressible fluids does not remain constant. A) True B) False

Last Answer : A

The bulk modulus of elasticity (A) Has the dimensions of 1/pressure (B) Increases with pressure (C) Is large when fluid is more compressible (D) Is independent of pressure and viscosity

Description : The bulk modulus of elasticity (A) Has the dimensions of 1/pressure (B) Increases with pressure (C) Is large when fluid is more compressible (D) Is independent of pressure and viscosity

Last Answer : Answer: Option B

A perfect gas (A) Has constant viscosity (B) Has zero viscosity (C) Is in compressible (D) None of the above

Description : A perfect gas (A) Has constant viscosity (B) Has zero viscosity (C) Is in compressible (D) None of the above

Last Answer : Answer: Option D

Practical fluids (A) Are viscous (B) Possess surface tension (C) Are compressible(D) Possess all the above properties

Description : Practical fluids (A) Are viscous (B) Possess surface tension (C) Are compressible (D) Possess all the above properties

Last Answer : Answer: Option D

Pile foundation is generally provided if soil is (A) Compressible (B) Water logged (C) Made up (D) All the above

Description : Pile foundation is generally provided if soil is (A) Compressible (B) Water logged (C) Made up (D) All the above

Last Answer : Answer: Option D

Negative skin friction (A) Is a downward drag acting on a pile due to downward movement of the surrounding compressible soil relative to the pile (B) Develops due to lowering of ground water (C) Both (a) and (b) (D) Neither (a) not (b)

Description : Negative skin friction (A) Is a downward drag acting on a pile due to downward movement of the surrounding compressible soil relative to the pile (B) Develops due to lowering of ground water (C) Both (a) and (b) (D) Neither (a) not (b)

Last Answer : Answer: Option C

16. Surface tension force is the product of surface tension per unit length and cross-sectional area of flow. A) Correct B) Incorrect

Description : 16. Surface tension force is the product of surface tension per unit length and cross-sectional area of flow. A) Correct B) Incorrect

Last Answer : B

Which of the following pairing is incorrect? (1) Hygrometer Water vapour content of the atmosphere (2) Lactometer Specific gravity of liquids (3) Anemometer Speed of the wind (4) Seismograph Earthquakes

Description : Which of the following pairing is incorrect? (1) Hygrometer Water vapour content of the atmosphere (2) Lactometer Specific gravity of liquids (3) Anemometer Speed of the wind (4) Seismograph Earthquakes

Last Answer : Lactometer Specific gravity of liquids

after atoms and molecules of gases and liquids are heated they move away from the heat . what takes their place?

Description : after atoms and molecules of gases and liquids are heated they move away from the heat . what takes their place?

Last Answer : ions

What can liquids and gases do that solids can not?

Description : What can liquids and gases do that solids can not?

Last Answer : Need answer

What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Description : What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Last Answer : B. A solute and a solvent

The diffusivity, DAB (for component A diffusing in B) is equal to the diffusivity DBA (for component B diffusing in A) for a binary mixture of (A) Newtonian liquids (B) Non-Newtonian liquids (C) Ideal gases (D) Real gases

Description : The diffusivity, DAB (for component A diffusing in B) is equal to the diffusivity DBA (for component B diffusing in A) for a binary mixture of (A) Newtonian liquids (B) Non-Newtonian liquids (C) Ideal gases (D) Real gases

Last Answer : (C) Ideal gases

In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity

Description : In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity

Last Answer : (C) Is independent of pressure