Hot wire anemometer is used to measure (A) Pressure in gases (B) Liquid discharge (C) Pressure in liquids (D) Gas velocities

Hot wire anemometer is used to measure
(A) Pressure in gases
(B) Liquid discharge
(C) Pressure in liquids
(D) Gas velocities
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Hot wire anemometer is used to measure the (A) Velocity of liquids (B) Temperature of liquids (C) Velocity of gases (D) Pressure of liquids

Description : Hot wire anemometer is used to measure the (A) Velocity of liquids (B) Temperature of liquids (C) Velocity of gases (D) Pressure of liquids

Last Answer : (C) Velocity of gases

Venturimeters, orificemeters and nozzles are used to measure the fluid discharge from a pipeline. The average fluid velocity in a pipeline can be measured by a/an (A) Weir (B) Hot wire anemometer (C) Cup and vane anemometer (D) None of these

Description : Venturimeters, orificemeters and nozzles are used to measure the fluid discharge from a pipeline. The average fluid velocity in a pipeline can be measured by a/an (A) Weir (B) Hot wire anemometer (C) Cup and vane anemometer (D) None of these

Last Answer : (B) Hot wire anemometer

Open channel liquid flow is most conveniently measured by a (A) Hot wire anemometer (B) Notch (C) Rotameter (D) Segmental orifice

Description : Open channel liquid flow is most conveniently measured by a (A) Hot wire anemometer (B) Notch (C) Rotameter (D) Segmental orifice

Last Answer : (B) Notch

A notch is used to measure __________ of liquids. (A) Pressure (B) Discharge (C) Velocity (D) Volume

Description : A notch is used to measure __________ of liquids. (A) Pressure (B) Discharge (C) Velocity (D) Volume

Last Answer : Answer: Option B

Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube

Description : Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube

Last Answer : Answer: Option D

In hot wire anemometer used for gas flow measurement, the wire is normally made of (A) Copper(B) Platinum(C) Constantan(D) Chromium

Description : In hot wire anemometer used for gas flow measurement, the wire is normally made of (A) Copper (B) Platinum (C) Constantan (D) Chromium

Last Answer : (B) Platinum

Which of the following is used for very accurate measurement of flow of gas at low velocity? (A) Pitot tube (B) Rotameter (C) Segmental orificemeter (D) Hot wire anemometer

Description : Which of the following is used for very accurate measurement of flow of gas at low velocity? (A) Pitot tube (B) Rotameter (C) Segmental orificemeter (D) Hot wire anemometer

Last Answer : (D) Hot wire anemometer

If the velocities of flow of a stream of 10 m depth recorded by a current meter at depths of 2 m and 8 m are 0.7 m and 0.3 m respectively, the discharge per unit width of the stream in cubic metres, is (A) 2 (B) 3 (C) 4 (D) 5

Description : If the velocities of flow of a stream of 10 m depth recorded by a current meter at depths of 2 m and 8 m are 0.7 m and 0.3 m respectively, the discharge per unit width of the stream in cubic metres, is (A) 2 (B) 3 (C) 4 (D) 5

Last Answer : Answer: Option D

The resistance wire used in a hot wire anemometer for conducting electrical current is made of (A) Copper (B) Tungsten (C) Chromium (D) Aluminium

Description : The resistance wire used in a hot wire anemometer for conducting electrical current is made of (A) Copper (B) Tungsten (C) Chromium (D) Aluminium

Last Answer : (B) Tungsten

Speed of a submarine in deep sea & that of an aeroplane is measured by a/an (A) Pitot tube (B) Hot wire anemometer (C) Rotameter (D) Stroboscope

Description : Speed of a submarine in deep sea & that of an aeroplane is measured by a/an (A) Pitot tube (B) Hot wire anemometer (C) Rotameter (D) Stroboscope

Last Answer : (A) Pitot tube

Which type of flow is measured by hot wire anemometer and describe its working principle with suitable diagram.

Description : Which type of flow is measured by hot wire anemometer and describe its working principle with suitable diagram. 

Last Answer : Heat transfer flowmeters this type of flowmeter measures the rise in temperature of the fluid after a known amount of heat has been added to it. Its theory is based upon the specific heat equation ... a supply so as to maintain the wire temperature constant, when the amount of heat transfer varies

Explain working of 'hot wire anemometer with the help of diagram.

Description : Explain working of 'hot wire anemometer with the help of diagram. 

Last Answer : Diagram : Working: The hot-wire anemometer is a fine resistance wire heated by a current passing through it. If a cooler fluid flows past the wire, heat is removed from it by the ... and responsive to high-frequency change in flow rate. One of its main application is aerodynamic research.

A venturi-flume is used to measure (A) Pressure of liquid (B) Discharge of liquid (C) Pressure difference between two points in a channel (D) Pressure difference between two points in a pipe

Description : A venturi-flume is used to measure (A) Pressure of liquid (B) Discharge of liquid (C) Pressure difference between two points in a channel (D) Pressure difference between two points in a pipe

Last Answer : Answer: Option B

A pitot tube is used to measure the (A) Velocity of flow at the required point in a pipe (B) Pressure difference between two points in a pipe (C) Total pressure of liquid flowing in a pipe (D) Discharge through a pipe

Description : A pitot tube is used to measure the (A) Velocity of flow at the required point in a pipe (B) Pressure difference between two points in a pipe (C) Total pressure of liquid flowing in a pipe (D) Discharge through a pipe

Last Answer : Answer: Option A

Venturimeter is used to (A) Measure the velocity of a flowing liquid (B) Measure the pressure of a flowing liquid (C) Measure the discharge of liquid flowing in a pipe (D) Measure the pressure difference of liquid flowing between two points in a pipe line

Description : Venturimeter is used to (A) Measure the velocity of a flowing liquid (B) Measure the pressure of a flowing liquid (C) Measure the discharge of liquid flowing in a pipe (D) Measure the pressure difference of liquid flowing between two points in a pipe line

Last Answer : Answer: Option C

What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Description : What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Last Answer : B. A solute and a solvent

Which of the following pairing is incorrect? (1) Hygrometer Water vapour content of the atmosphere (2) Lactometer Specific gravity of liquids (3) Anemometer Speed of the wind (4) Seismograph Earthquakes

Description : Which of the following pairing is incorrect? (1) Hygrometer Water vapour content of the atmosphere (2) Lactometer Specific gravity of liquids (3) Anemometer Speed of the wind (4) Seismograph Earthquakes

Last Answer : Lactometer Specific gravity of liquids

Venturimeter is used to measure: (1) rate of flow of liquids (2) liquid pressure (3) surface tension (4) liquid density

Description : Venturimeter is used to measure: (1) rate of flow of liquids (2) liquid pressure (3) surface tension (4) liquid density

Last Answer : rate of flow of liquids

The sewer pipes A. Carry sewage as gravity conduits B. Are designed for generating self-cleansing velocities at different discharge C. Should resist the wear and tear caused due to abrasion D. All the above

Description : The sewer pipes A. Carry sewage as gravity conduits B. Are designed for generating self-cleansing velocities at different discharge C. Should resist the wear and tear caused due to abrasion D. All the above

Last Answer : ANS: D

The flow in a pipe or channel is said to be non-uniform when (A) The liquid particles at all sections have the same velocities (B) The liquid particles at different sections have different velocities (C) The quantity of liquid flowing per second is constant (D) Each liquid particle has a definite path

Description : The flow in a pipe or channel is said to be non-uniform when (A) The liquid particles at all sections have the same velocities (B) The liquid particles at different sections have different ... The quantity of liquid flowing per second is constant (D) Each liquid particle has a definite path

Last Answer : Answer: Option B

The flow in a pipe or channel is said to be uniform when (A) The liquid particles at all sections have the same velocities (B) The liquid particles at different sections have different velocities (C) The quantity of liquid flowing per second is constant (D) Each liquid particle has a definite path

Description : The flow in a pipe or channel is said to be uniform when (A) The liquid particles at all sections have the same velocities (B) The liquid particles at different sections have different ... The quantity of liquid flowing per second is constant (D) Each liquid particle has a definite path

Last Answer : Answer: Option A

Fugacity is a measure of the (A) Escaping tendencies of the same substance in different phases of a system (B) Relative volatility of a mixture of two miscible liquids (C) Behaviour of ideal gases (D) None of these

Description : Fugacity is a measure of the (A) Escaping tendencies of the same substance in different phases of a system (B) Relative volatility of a mixture of two miscible liquids (C) Behaviour of ideal gases (D) None of these

Last Answer : (A) Escaping tendencies of the same substance in different phases of a system

Anemometer is used to measure – (1) wind direction (2) wind velocity (3) pressure gradient (4) wind speed and time

Description : Anemometer is used to measure – (1) wind direction (2) wind velocity (3) pressure gradient (4) wind speed and time

Last Answer : (2) wind velocity Explanation: An anemometer is a device for measuring wind speed, and is a common weather station instrument. The first known description of an anemometer was given by Leon Battista Alberti around 1450.

The instrument used to measure pressure (1) Anemometer (2) Aneroid Barometer (3) Hygrometer (4) Thermometer

Description : The instrument used to measure pressure (1) Anemometer (2) Aneroid Barometer (3) Hygrometer (4) Thermometer

Last Answer : Aneroid Barometer

Anemometer is used to measure (1) wind direction (2) wind velocity (3) pressure gradient (4) wind speed and time

Description : Anemometer is used to measure (1) wind direction (2) wind velocity (3) pressure gradient (4) wind speed and time

Last Answer : wind velocity

In distillation columns, the number of bubble caps per tray primarily depends upon the (A) Allowable liquid velocity (B) Allowable gas velocity (C) Allowable gas and liquid velocities

Description : In distillation columns, the number of bubble caps per tray primarily depends upon the (A) Allowable liquid velocity (B) Allowable gas velocity (C) Allowable gas and liquid velocities

Last Answer : (C) Allowable gas and liquid velocities

04. All the gases are considered to have compressible flow and all the liquids are considered to have incompressible flow. A) Correct B) Incorrect

Description : 04. All the gases are considered to have compressible flow and all the liquids are considered to have incompressible flow. A) Correct B) Incorrect

Last Answer : A

For very great pressures, viscosity of moss gases and liquids (A) Remain same (B) Increases (C) Decreases (D) Shows erratic behaviou

Description : For very great pressures, viscosity of moss gases and liquids (A) Remain same (B) Increases (C) Decreases (D) Shows erratic behaviour

Last Answer : Answer: Option D

Hydrometer is used to determine (A) Specific gravity of liquids (B) Specific gravity of solids (C) Specific gravity of gases (D) Relative humidity

Description : Hydrometer is used to determine (A) Specific gravity of liquids (B) Specific gravity of solids (C) Specific gravity of gases (D) Relative humidity

Last Answer : Answer: Option A

Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Description : Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Last Answer : (D) Boiling of a liquid on a hot surface

What is the advantage of flash pasteurization? a. It Doesn't Get As Hot b. It Is Faster c. It Is Also Used For Solids, Not Just Liquids d. It Also Sterilizes The Liquid

Description : What is the advantage of flash pasteurization? a. It Doesn't Get As Hot b. It Is Faster c. It Is Also Used For Solids, Not Just Liquids d. It Also Sterilizes The Liquid

Last Answer : b. It Is Faster

Which instrument is used to measure altitudes in aircraft’s? (1) Audiometer (2) Ammeter (3) Altimeter (4) Anemometer

Description : Which instrument is used to measure altitudes in aircraft’s? (1) Audiometer (2) Ammeter (3) Altimeter (4) Anemometer

Last Answer : (3) Altimeter Explanation: Ammeter - Measures strength of electric current. Audiometer - Measures intensity of sound. Anemometer - Measures force and velocity of wind and directions.

Which of the following instruments is used to measure humidity? (1) Kata Thermometer (2) Anemometer (3) Sling Psychrometer (4) Clinical Thermometer

Description : Which of the following instruments is used to measure humidity? (1) Kata Thermometer (2) Anemometer (3) Sling Psychrometer (4) Clinical Thermometer

Last Answer : (3) Sling Psychrometer Explanation: A psychrometer consists of two thermometers, one which is dry and one which is kept moist with distilled water on a sock or wick. The two thermometers are ... is sometimes used for field measurements, but is being replaced by more convenient electronic sensors.

Instrument used to measure the force and velocity of the wind is – (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Description : Instrument used to measure the force and velocity of the wind is – (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Last Answer : (2) Anemometer Explanation: An anemometer is a device for measuring wind speed, and is a common weather station instrument. The term is derived from the Greek word anemos, meaning wind, and ... between the pressure and the speed, an anemometer designed for one will give information about both.

The instrument used to measure the speed of the wind is – (1) Altimeter (2) Anemometer (3) Chronometer (4) Dosimeter

Description : The instrument used to measure the speed of the wind is – (1) Altimeter (2) Anemometer (3) Chronometer (4) Dosimeter

Last Answer : (2) Anemometer Explanation: An anemometer is a device for measuring wind speed, and is a common weather station instrument. The term is derived from the Greek word anemos, meaning wind, ... aerodynamics. The first known description of an anemometer was given by Leon Battista Alberti around 1450.

Anemometer is used to measure–

Description : Anemometer is used to measure–

Last Answer : Speed of wind

A device used to measure the amount of moisture in the atmosphere is called a: w) hydrometer (pron: high-dro-me-ter) x) hygrometer (pron: high-gro-me-ter) y) anemometer z) barometer

Description : A device used to measure the amount of moisture in the atmosphere is called a: w) hydrometer (pron: high-dro-me-ter) x) hygrometer (pron: high-gro-me-ter) y) anemometer z) barometer

Last Answer : ANSWER: X -- HYGROMETER

Which apparatus is used to measure the intensity of light? (1) Lux meter (2) Calorimeter (3) Anemometer (4) Altimeter

Description : Which apparatus is used to measure the intensity of light? (1) Lux meter (2) Calorimeter (3) Anemometer (4) Altimeter

Last Answer : Lux meter

An instrument used to measure humidity is: (1) Anemometer (2) Hygrometer (3) Thermometer (4) Pyrheliometer

Description : An instrument used to measure humidity is: (1) Anemometer (2) Hygrometer (3) Thermometer (4) Pyrheliometer

Last Answer :  Hygrometer

Which of the following instruments is used to measure humidity ? (1) Kata Thermometer (2) Anemometer (3) Sling Psychrometer (4) Clinical Thermometer

Description : Which of the following instruments is used to measure humidity ? (1) Kata Thermometer (2) Anemometer (3) Sling Psychrometer (4) Clinical Thermometer

Last Answer : Sling Psychrometer

The instrument used to measure the speed of the wind is (1) Altimeter (2) Anemometer (3) Chronometer (4) Dosimeter

Description : The instrument used to measure the speed of the wind is (1) Altimeter (2) Anemometer (3) Chronometer (4) Dosimeter

Last Answer : Anemometer

Instrument used to measure the force and velocity of the wind is (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Description : Instrument used to measure the force and velocity of the wind is (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Last Answer : Anemometer

In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity

Description : In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity

Last Answer : (C) Is independent of pressure

With increase in temperature, the solubility of gases in liquids, at fixed pressure (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on the system

Description : With increase in temperature, the solubility of gases in liquids, at fixed pressure (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on the system

Last Answer : (B) Decreases

Two liquids manometer is used for measuring small pressure differences in (A) Liquids (B) Gases (C) Mixture of hydrocarbons (D) None of these

Description : Two liquids manometer is used for measuring small pressure differences in (A) Liquids (B) Gases (C) Mixture of hydrocarbons (D) None of these

Last Answer : (A) Liquids

A differential pressure cell is used for (A) Measuring small pressure difference in gases (B) Measuring small pressure difference in liquids (C) Remote recording of pressure difference (D) Measuring the difference of the impact & the static pressure

Description : A differential pressure cell is used for (A) Measuring small pressure difference in gases (B) Measuring small pressure difference in liquids (C) Remote recording of pressure difference (D) Measuring the difference of the impact & the static pressure

Last Answer : (C) Remote recording of pressure difference

The coefficient of discharge for an external mouthpiece depends upon (A) Velocity of liquid (B) Pressure of liquid (C) Area of mouthpiece (D) Length of mouthpiece

Description : The coefficient of discharge for an external mouthpiece depends upon (A) Velocity of liquid (B) Pressure of liquid (C) Area of mouthpiece (D) Length of mouthpiece

Last Answer : Answer: Option D

The hygrometer is an instrument to measure (a) the relative density of liquids (b) the purity of milk (c) relative humidity (d) atmospheric pressure

Description : The hygrometer is an instrument to measure (a) the relative density of liquids (b) the purity of milk (c) relative humidity (d) atmospheric pressure

Last Answer : Ans:(c)

Choose the wrong statement (A) Viscosity of a fluid is that property which determines the amount of its resistance to a shearing force (B) Viscosity is due primarily to interaction between fluid molecules (C) Viscosity of liquids decreases with increase in temperature (D) Viscosity of liquid

Description : Choose the wrong statement (A) Viscosity of a fluid is that property which determines the amount of its resistance to a shearing force (B) Viscosity is due primarily to interaction between fluid molecules (C) Viscosity of liquids decreases with increase in temperature (D) Viscosity of liquid

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Head loss in smaller size pipes at equal velocities, is less (B) Cost of pumping is less in smaller size pipes (C) Cost of smaller pipes is comparatively more (D) None of these

Description : Pick up the correct statement from the following:  (A) Head loss in smaller size pipes at equal velocities, is less  (B) Cost of pumping is less in smaller size pipes  (C) Cost of smaller pipes is comparatively more  (D) None of these 

Last Answer : (D) None of these