If the demand line drawn from a ridge in a flow mass curve does not intersect the curve again, it indicates that (A) Demand cannot be met by inflow (B) Reservoir was not full at the beginning (C) Both (A) and (B) (D) None of the above

If the demand line drawn from a ridge in a flow mass curve does not intersect the curve again, it
indicates that
(A) Demand cannot be met by inflow
(B) Reservoir was not full at the beginning
(C) Both (A) and (B)
(D) None of the above
by

1 Answer

Answer :

Answer: Option A
by

Related questions

Consider the following situation in a flow mass curve study when demand line drawn from a ridge in the mass curve does not intersect the mass curve again. This means that : (a) The storage is not adequate (b) The demand cannot be met by the inflow as the reservoir will not refill (c) The reservoir was not full at the beginning (d) The reservoir is wasting water by spill

Description : Consider the following situation in a flow mass curve study when demand line drawn from a ridge in the mass curve does not intersect the mass curve again. This means that : (a) The storage is not ... (c) The reservoir was not full at the beginning (d) The reservoir is wasting water by spill

Last Answer : (b) The demand cannot be met by the inflow as the reservoir will not refill

Select the correct statement. (A) A contour is not necessarily a closed curve. B) A contour represents a ridge line if the concave side of lower value contour lies towards the higher value contour (C) Two contours of different elevations do not cross each other except in case of an overhanging cliff (D) All of the above statements are correct

Description : Select the correct statement. (A) A contour is not necessarily a closed curve. B) A contour represents a ridge line if the concave side of lower value contour lies towards the higher value contour ... each other except in case of an overhanging cliff (D) All of the above statements are correct

Last Answer : (C) Two contours of different elevations do not cross each other except in case of an overhanging clif

What is the price at which the supply curve for a good and its demand curve intersect called?

Description : What is the price at which the supply curve for a good and its demand curve intersect called?

Last Answer : Equilibrium price

What is a line that is drawn to show the edge and surface ridge of an object?

Description : What is a line that is drawn to show the edge and surface ridge of an object?

Last Answer : contour line

The rate of silting in a reservoir (A) Is less in the beginning (B) Remains constant throughout (C) Is more in the beginning (D) is more in the beginning and reduces in the end

Description : The rate of silting in a reservoir  (A) Is less in the beginning  (B) Remains constant throughout  (C) Is more in the beginning  (D) is more in the beginning and reduces in the end 

Last Answer : (D) is more in the beginning and reduces in the end 

If a line is drawn parallel to the base of an isosceles triangle to intersect its equal sides, prove that the quadrilateral, so formed is cyclic. -Maths 9th

Description : If a line is drawn parallel to the base of an isosceles triangle to intersect its equal sides, prove that the quadrilateral, so formed is cyclic. -Maths 9th

Last Answer : Given ΔABC is an isosceles triangle such that AB = AC and also DE || SC. To prove Quadrilateral BCDE is a cyclic quadrilateral. Construction Draw a circle passes through the points B, C, D and E.

If a line is drawn parallel to the base of an isosceles triangle to intersect its equal sides, prove that the quadrilateral, so formed is cyclic. -Maths 9th

Description : If a line is drawn parallel to the base of an isosceles triangle to intersect its equal sides, prove that the quadrilateral, so formed is cyclic. -Maths 9th

Last Answer : Given ΔABC is an isosceles triangle such that AB = AC and also DE || SC. To prove Quadrilateral BCDE is a cyclic quadrilateral. Construction Draw a circle passes through the points B, C, D and E.

Two congruent circles intersect each other at point A and B.Through A any line segment PAQ is drawn so that P,Q lie on the two circles.Prove that BP = BQ. -Maths 9th

Description : Two congruent circles intersect each other at point A and B.Through A any line segment PAQ is drawn so that P,Q lie on the two circles.Prove that BP = BQ. -Maths 9th

Last Answer : Solution :- Let, O and O' be the centres of two congruent circles. As, AB is the common chord of these circles. ∴ ACB = ADB As congruent arcs subtent equal angles at the centre. ∠AOB = ∠AO'B ⇒ 1/2∠AOB = 1/2∠AO'B ⇒ ∠BPA = ∠BQA ⇒ BP = BQ (Sides opposite to equal angles)

Two circles with centre O and O' intersect at two points A and B. A line PQ is drawn parallel to OO' through B intersecting the circles at P and Q. Prove that PQ = 2 OO'. -Maths 9th

Description : Two circles with centre O and O' intersect at two points A and B. A line PQ is drawn parallel to OO' through B intersecting the circles at P and Q. Prove that PQ = 2 OO'. -Maths 9th

Last Answer : Solution :- Construction: Draw two circles having centres O and O' intersecting at points A and B. Draw a parallel line PQ to OO' ... iii) Again, OO' = MN [As OO' NM is a rectangle] ...(iv) ⇒ 2OO' = PQ Hence proved.

What controls cabin pressurisation? a. ECS pack mass flow controller b. Outflow valve c. Engine bleed valve d. Inflow valve

Description : What controls cabin pressurisation? a. ECS pack mass flow controller b. Outflow valve c. Engine bleed valve d. Inflow valve

Last Answer : b. Outflow valve

What controls cabin pressurisation? a. ECS pack mass flow controller b. Outflow valve c. Engine bleed valve d. Inflow valve

Description : What controls cabin pressurisation? a. ECS pack mass flow controller b. Outflow valve c. Engine bleed valve d. Inflow valve

Last Answer : b. Outflow valve

Pick up the correct statement from the following: (A) If the slope of the curve of a mass diagram in the direction of increasing abscissa is downward, it indicates an embankment (B) The vertical distance between a maximum ordinate and the next forward maximum ordinate represents the whole volume of the embankment (C) The vertical distance between a minimum ordinate and the next forward maximum ordinate represents the whole volume of a cutting (D) All the above

Description : Pick up the correct statement from the following: (A) If the slope of the curve of a mass diagram in the direction of increasing abscissa is downward, it indicates an embankment (B) The ... and the next forward maximum ordinate represents the whole volume of a cutting (D) All the above

Last Answer : (D) All the above

Stock in the beginning results in----------- a) Application of funds b) Source of fund c) Inflow of fund d) None of these

Description : Stock in the beginning results in----------- a) Application of funds b) Source of fund c) Inflow of fund d) None of these

Last Answer : a) Application of funds

At a given time and in a given marketplace, the entire market demand curve indicates the (a) quantity of a good consumers would be willing and able to purchase at a given price. (b) quantity of a good consumers would be able to purchase at a series of prices. (c) quantity of a good consumers want to purchase at a given price (d) quantity of a good consumers have purchased at a series of prices over the year.

Description : At a given time and in a given marketplace, the entire market demand curve indicates the (a) quantity of a good consumers would be willing and able to purchase at a given price. (b) quantity of a ... a given price (d) quantity of a good consumers have purchased at a series of prices over the year.

Last Answer : (b) quantity of a good consumers would be able to purchase at a series of prices. 

Pick up the incorrect statement from the following: (A) An activity of a project is denoted by an arrow on the net work (B) The tail of the arrow indicates the start of the activity (C) The head of the arrow indicates the end of the activity (D) The arrows are drawn to scale from left to right

Description : Pick up the incorrect statement from the following: (A) An activity of a project is denoted by an arrow on the net work (B) The tail of the arrow indicates the start of the activity (C) The head of the arrow indicates the end of the activity (D) The arrows are drawn to scale from left to right

Last Answer : (D) The arrows are drawn to scale from left to right

In the figure, arcs and drawn by taking vertices A, B and C of an equilateral triangle of side 10 cm to intersect the sides BC, CA and AB at their respective mid-points D, E and F. Find the area of teh shaded region. [use π = 3.14] -Maths 10th

Description : In the figure, arcs and drawn by taking vertices A, B and C of an equilateral triangle of side 10 cm to intersect the sides BC, CA and AB at their respective mid-points D, E and F. Find the area of teh shaded region. [use π = 3.14] -Maths 10th

Last Answer : Step-by-step explanation: We have been provided that, Triangle ABC is an Equilateral triangle. Side of triangle is = 10 cm The arcs are drawn from each vertices of the triangle. We get three sectors ... portion is, Remaining area = Area of triangle ABC - Area of all the sectors 39.25cm square

The area of parallelogram PQRS is 88 cm sq. A perpendicular from S is drawn to intersect PQ at M. If SM = 8 cm, then find the length of PQ. -Maths 9th

Description : The area of parallelogram PQRS is 88 cm sq. A perpendicular from S is drawn to intersect PQ at M. If SM = 8 cm, then find the length of PQ. -Maths 9th

Last Answer : Given area of parallelogram = 88 cm² And SM = 8cm Area of a parallelogram = height × base (Height is the measurement of a perpendicular drawn from one side to other) Here, Area of PQRS = SM × PQ 88cm² = 8cm × PQ 11cm = PQ

Full amount of extra width of a pavement on the curve, is provided at (A) Beginning of the transition curve (B) Centre of the transition curve (C) Beginning of the circular curve (D) Centre of the circular curve

Description : Full amount of extra width of a pavement on the curve, is provided at (A) Beginning of the transition curve (B) Centre of the transition curve (C) Beginning of the circular curve (D) Centre of the circular curve

Last Answer : Answer: Option C

What is difference between banks & HFCs? A. HFCs cannot accept demand deposits B. It cannot issue cheques drawn on itself C. deposit insurance facility of Deposit Insurance and Credit Guarantee Corporation is not available to depositors of HFCs D. All of the Above E. None of the Above

Description : What is difference between banks & HFCs? A. HFCs cannot accept demand deposits B. It cannot issue cheques drawn on itself C. deposit insurance facility of Deposit Insurance and Credit Guarantee Corporation is not available to depositors of HFCs D. All of the Above E. None of the Above

Last Answer : D. All of the Above Explanation: HFCs are doing functions similar to banks as banks also provides housing loans. However, there are a few differences as given below: ♦ HFCs cannot accept demand ... Credit Guarantee Corporation(DICGC) is not available to depositors of HFCs, unlike in case of banks.

Drop manholes at the junctions of sewer lines, are provided if A. Invert level of a branch sewer is more than 60 cm that of the main sewer B. Sewer line runs along a main road C. Ordinary manhole cannot be built D. Two sewer lines intersect

Description : Drop manholes at the junctions of sewer lines, are provided if A. Invert level of a branch sewer is more than 60 cm that of the main sewer B. Sewer line runs along a main road C. Ordinary manhole cannot be built D. Two sewer lines intersect

Last Answer : ANS: A

What is a cash flow table in project management? A. A table portraying inflow of cash in a project B. A table portraying outgoing expenses of a project C. It is the tool that is used to study such cash flows by breaking inflows and outflows down, usually on a monthly basis D. A table portraying debts taken for a project

Description : What is a cash flow table in project management?  A. A table portraying inflow of cash in a project  B. A table portraying outgoing expenses of a project  C. It is the tool that is used ... inflows and  outflows down, usually on a monthly basis  D. A table portraying debts taken for a project

Last Answer : C. It is the tool that is used to study such cash flows by breaking inflows and  outflows down, usually on a monthly basis

Which of the following is least likely to be part of the calculation of the terminal- year incremental net cash flow for an energy-related expansion project? A. An initial working capital investment is now returned as an additional cash inflow B. Disposal/reclamation costs C. Capitalized expenditures D. Salvage value of any sold or disposed assets

Description : Which of the following is least likely to be part of the calculation of the terminal- year incremental net cash flow for an energy-related expansion project? A. An initial working capital ... Disposal/reclamation costs C. Capitalized expenditures D. Salvage value of any sold or disposed assets

Last Answer : D. Salvage value of any sold or disposed assets

The continuity equation in ideal fluid flow states that (A) Net rate of inflow into any small volume must be zero (B) Energy is not constant along a streamline (C) Energy is constant along a streamline (D) There exists a velocity potential

Description : The continuity equation in ideal fluid flow states that (A) Net rate of inflow into any small volume must be zero (B) Energy is not constant along a streamline (C) Energy is constant along a streamline (D) There exists a velocity potential

Last Answer : (A) Net rate of inflow into any small volume must be zero

A transaction that doesn’t make any change in working capital position is --------- a) Inflow of fund b) Out flow of fund c) Non fund transaction d) Fund transaction

Description : A transaction that doesn’t make any change in working capital position is --------- a) Inflow of fund b) Out flow of fund c) Non fund transaction d) Fund transaction

Last Answer : c) Non fund transaction

Decrease in a creditor is a---------------- of cash a) Inflow b) No flow of cash c) Outflow d) None of these

Description : Decrease in a creditor is a---------------- of cash a) Inflow b) No flow of cash c) Outflow d) None of these

Last Answer : c) Outflow

-------------------means transfer of economic value of firm from one asset or equity to another. a) Flow of funds b) Uses of fund c) Inflow of funds d) Application of funds

Description : -------------------means transfer of economic value of firm from one asset or equity to another. a) Flow of funds b) Uses of fund c) Inflow of funds d) Application of funds

Last Answer : a) Flow of funds

The total accumulated value of foreign- owned assets at a given period of time is __. A. flow of FDI B. stock of FDI C. inflow of FDI D. outflow of FDI

Description : The total accumulated value of foreign- owned assets at a given period of time is __. A. flow of FDI B. stock of FDI C. inflow of FDI D. outflow of FDI

Last Answer : B. stock of FDI

Pick out the wrong statement about a streamline. (A) It is always parallel to the main direction of the fluid flow (B) It is a line across which there is no flow and it is equivalent to a rigid boundary(C) Streamlines intersect at isolated point of zero velocity and infinitevelocity(D) The fluid lying between any two streamlines can be considered to be inisolation and the streamline spacing varies inversely as the velocity

Description : Pick out the wrong statement about a streamline. (A) It is always parallel to the main direction of the fluid flow (B) It is a line across which there is no flow and it is ... any two streamlines can be considered to be in isolation and the streamline spacing varies inversely as the velocity

Last Answer : (A) It is always parallel to the main direction of the fluid flow

Higher PPC curve indicates (a) More production of both the things with increase in technology or factor inputs supply; (b) More production of one at the expense of other; (c) More production of one items at the expense of other with increase in technology or factor input supply ; (d) Less than full employment situation

Description : Higher PPC curve indicates (a) More production of both the things with increase in technology or factor inputs supply; (b) More production of one at the expense of other; (c) More production of ... of other with increase in technology or factor input supply ; (d) Less than full employment situation

Last Answer : (a) More production of both the things with increase in technology or factor inputs supply; 

Pick up the correct statement from the following: (A) A hydrograph is a plot of discharge versus time (B) A mass curve is a plot of accumulated flow versus time (C) The mass curve continuously rises (D) All the above

Description : Pick up the correct statement from the following:  (A) A hydrograph is a plot of discharge versus time  (B) A mass curve is a plot of accumulated flow versus time  (C) The mass curve continuously rises  (D) All the above 

Last Answer : (D) All the above 

The flow-mass curve is graphical representation of (A) Cumulative discharge and time (B) Discharge and percentage probability of flow being equalled or exceeded (C) Cumulative discharge, volume and time in chronological order (D) Discharge and time in chronological order

Description : The flow-mass curve is graphical representation of (A) Cumulative discharge and time (B) Discharge and percentage probability of flow being equalled or exceeded (C) Cumulative discharge, volume and time in chronological order (D) Discharge and time in chronological order

Last Answer : Answer: Option C

Euler's equation of motion states, that at every point, the (A) Fluid momentum is constant (B) Force per unit mass equals acceleration (C) Rate of mass outflow is equal to the rate of mass inflow (D) None of these

Description : Euler's equation of motion states, that at every point, the (A) Fluid momentum is constant (B) Force per unit mass equals acceleration (C) Rate of mass outflow is equal to the rate of mass inflow (D) None of these

Last Answer : (B) Force per unit mass equals acceleration

Curve `b^(2)x^(2) + a^(2)y^(2) = a^(2)b^(2) and m^(2)x^(2)- y^(2)l^(2) = l^(2)m^(2)` intersect each other at right-angle if:

Description : Curve `b^(2)x^(2) + a^(2)y^(2) = a^(2)b^(2) and m^(2)x^(2)- y^(2)l^(2) = l^(2)m^(2)` intersect each other at right-angle if:

Last Answer : Curve `b^(2)x^(2) + a^(2)y^(2) = a^(2)b^(2) and m^(2)x^(2)- y^(2)l^(2) = l^(2)m^(2)` intersect each ... ^(2)+m^(2)` D. `a^(2)+b^(2) = l^(2)-m^(2)`

Which one of the following not a feature of Indifference Curve? (1) They do not intersect each other (2) They slope downwards to the right (3) They are parallel to each other (4) They are concave to each other

Description : Which one of the following not a feature of Indifference Curve? (1) They do not intersect each other (2) They slope downwards to the right (3) They are parallel to each other (4) They are concave to each other

Last Answer : (4) They are concave to each other Explanation: Indifference curves are usually convex to the on-gin. In In other words, the indifference curve is relatively flatter in its righthand portion and ... convexity of an indifference curve depends on the rate of fall in the marginal rate of substitution.

In short run a monopolistic competition firm will be in equilibrium where (a) MR = curve intersect SMC curve from above (b) MR curve intersect SMC curve from below (c) MC = AR ; (d) MR curve intersect SMC from below and P is equal to or more than AVC

Description : In short run a monopolistic competition firm will be in equilibrium where (a) MR = curve intersect SMC curve from above (b) MR curve intersect SMC curve from below (c) MC = AR ; (d) MR curve intersect SMC from below and P is equal to or more than AVC

Last Answer : ; (d) MR curve intersect SMC from below and P is equal to or more than AVC

Which one of the following is not a feature of Indifference Curve? (1) They do not intersect each other (2) They slope downwards to the right (3) They are parallel to each other (4) They are concave to each other

Description : Which one of the following is not a feature of Indifference Curve? (1) They do not intersect each other (2) They slope downwards to the right (3) They are parallel to each other (4) They are concave to each other

Last Answer : They are concave to each other

More than one break in the line or in saturation curve indicates the following quality of protein. (A) Non homogenity (B) Purity (C) Homogeneity (D) None of these

Description : More than one break in the line or in saturation curve indicates the following quality of protein. (A) Non homogenity (B) Purity (C) Homogeneity (D) None of these

Last Answer : Answer : A

The angle of intersection of a contour and a ridge line, is (A) 30° (B) 45° (C) 60° (D) 90°

Description : The angle of intersection of a contour and a ridge line, is  (A) 30°  (B) 45°  (C) 60°  (D) 90° 

Last Answer : (D) 90° 

To avoid vaporisation in the pipe line, the pipe line over the ridge is laid such that it is not more than (A) 2.4 m above the hydraulic gradient (B) 6.4 m above the hydraulic gradient (C) 10.0 m above the hydraulic gradient (D) 5.0 above the hydraulic gradient

Description : To avoid vaporisation in the pipe line, the pipe line over the ridge is laid such that it is not more than (A) 2.4 m above the hydraulic gradient (B) 6.4 m above the hydraulic gradient (C) 10.0 m above the hydraulic gradient (D) 5.0 above the hydraulic gradient

Last Answer : Answer: Option B

The line of intersection of the surfaces of a sloping roof forming an external angle exceeding 180°, is (A) Ridge (B) Hip (C) Valley (D) None of these

Description : The line of intersection of the surfaces of a sloping roof forming an external angle exceeding 180°, is (A) Ridge (B) Hip (C) Valley (D) None of these

Last Answer : Answer: Option B

The highest line of sloping roof, where two opposite slopes meet, is known as (A) Rafter (B) Ridge (C) Crown (D) Eave

Description : The highest line of sloping roof, where two opposite slopes meet, is known as (A) Rafter (B) Ridge (C) Crown (D) Eave

Last Answer : Answer: Option B

The line of intersection of two surfaces of a sloping roof forming an internal angle less than 180°, is known as (A) Ridge (B) Hip (C) Valley (D) None of these

Description : The line of intersection of two surfaces of a sloping roof forming an internal angle less than 180°, is known as (A) Ridge (B) Hip (C) Valley (D) None of these

Last Answer : Answer: Option C

Profile levelling is usually done for determining (A) Contours of an area (B) Capacity of a reservoir (C) Elevations along a straight line (D) Boundaries of property

Description : Profile levelling is usually done for determining  (A) Contours of an area  (B) Capacity of a reservoir  (C) Elevations along a straight line  (D) Boundaries of property 

Last Answer : (C) Elevations along a straight line 

The radius of curvature provided along a transition curve, is (A) Minimum at the beginning (B) Same throughout its length (C) Equal to the radius of circular curve (D) Varying from infinity to the radius of circular curve

Description : The radius of curvature provided along a transition curve, is (A) Minimum at the beginning (B) Same throughout its length (C) Equal to the radius of circular curve (D) Varying from infinity to the radius of circular curve

Last Answer : Answer: Option D

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD' and AD' when measured were 4 cm, 3 cm and 5 cm respectively. The angle between the reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90

Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined  and produced to intersect the load line at D and a line parallel to the load line through A at D'.  Distances AD, DD ... reactions at A and B is  (A) 30°  (B) 45°  (C) 60°  (D) 90

Last Answer : (D) 90

In one dimensional flow, the flow (A) Is steady and uniform (B) Takes place in straight line (C) Takes place in curve (D) Takes place in one direction

Description : In one dimensional flow, the flow (A) Is steady and uniform (B) Takes place in straight line (C) Takes place in curve (D) Takes place in one direction

Last Answer : Answer: Option B

What is your work history? What were your goals at the beginning? How well have you met those goals so far?

Description : What is your work history? What were your goals at the beginning? How well have you met those goals so far?

Last Answer : answer:Let's see: While in high school (so 15-17): McDonald's when I was 15. Then switched to Wendy's when I was 16 because they offered more money and more hours. Got fired from Wendy's due to the ... for the rest of my life. I can't wait to settle down and be in one location for a while though.