Description : Pick out the wrong statement. (A) Both annealing and normalising release the internal stresses of the material besides improving the mechanical properties (B) Low carbon steel does not respond to ... are also used for surface hardening (D) Martempering of a material is a hardening process
Last Answer : Option C
Description : The heat treatment process to which castings and the steel balls produced by cold heading are subjected is (A) Tempering (B) Normalising (C) Annealing (D) None of these
Last Answer : (B) Normalising
Description : Cold worked steel parts are normally subjected to (A) Normalising (B) Hardening (C) Annealing (D) Shot peening
Last Answer : (C) Annealing
Description : . To improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing
Last Answer : (A) Spheroidising
Description : To improve the machinability of steel by its softening, it is subjected to (A) Cold working (B) Annealing (C) Shot blasting (D) Heating
Last Answer : (B) Annealing
Description : Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness
Last Answer : (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness Share
Description : o improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing
Last Answer : Option A
Description : The heat treatment process applied to cold formed steel parts is (A) Normalising (B) Tempering (C) Artificial ageing (D) Solution annealing
Last Answer : (D) Solution annealing
Description : Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon ... the metal surface) cause nitride formation with increase in surface hardness (D) None of these
Last Answer : (D) None of these
Description : Which of the following heat treatment processes is used for softening the hardened material? (A) Normalising (B) Tempering (C) Annealing (D) None of these
Last Answer : (B) Tempering
Description : Post weld heat treatment is done by (A) Normalising (B) Stress relieving (C) Tempering (D) Solution annealing
Last Answer : (B) Stress relieving
Description : Which of the following is a heat treatment furnace? (A) Muffle furnace (B) Annealing furnace (C) Reheating furnace (D) Rotary kiln
Last Answer : (B) Annealing furnace
Description : Which of the following heat treatment processes is usually applied to castings? (A) Tempering (B) Annealing (C) Normalising (D) Carburising
Last Answer : (D) Carburising
Description : Pick out the wrong statement. (A) Tin can be readily and very easily drawn into very fine wire (B) Tin can be severely cold worked without the necessity of annealing due to its low recrystallisation temperature (C) Tin exists in two allotropic forms
Last Answer : (A) Tin can be readily and very easily drawn into very fine wire
Description : Steel will respond to hardening by heat treatment processes, only when the minimum carbon content in it is __________ percent. (A) 0.02 (B) 0.2 (C) 0.35 (D) 0.5
Last Answer : (B) 0.2
Description : Mild steel is an alloy with carbon content a)0.25%. b)5% c)10%. d)25%
Last Answer : a)0.25%.
Description : Maximum carbon content in any variety of steel can be upto 1.3%. Steel containing 0.4% Carbon is not used for making (A) Nuts (B) Bolts (C) Chisels
Last Answer : (C) Chisels
Description : Generally __________ are subjected to galvanising (i.e., zinc coating). (A) Non-ferrous metals (B) Non-metals (C) Low carbon steels (D) Stainless steel
Last Answer : (C) Low carbon steels
Description : Hardened steel is softened by (A) Normalising (B) Tempering (C) Annealing (D) Carburising
Description : Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising
Description : Nitriding of steel is a process for (A) Case hardening (B) Spheroidising (C) Normalising (D) Annealing
Last Answer : (A) Case hardening
Description : Neutral atmosphere is maintained in a/an __________ furnace. (A) Cold rolled steel coil annealing (B) Open hearth (C) Soaking pit (D) Walking beam reheating
Last Answer : (A) Cold rolled steel coil annealing
Description : Protective gas used in the annealing furnace for steel coil comprises of (A) 95% N2 + 5% H2 (B) 5% H2 + 9% N2 (C) 100% CO (D) 100% H2
Last Answer : (A) 95% N2 + 5% H2
Description : Reverberatory furnace is used for (A) Roasting/reduction of ores (B) Annealing steel coil (C) Heating air (D) Steel melting
Last Answer : (A) Roasting/reduction of ores
Description : High purity nitrogen is used in (A) Making protective gas (95% N2 + 5% H2 ) for annealing of cold rolled steel strip coils (B) Fire fighting purposes (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Last Answer : (A) Normalising
Description : __________ of hard alloy and tool steel is done to make it easily machinable. (A) Case carburising (B) Tempering (C) Normalising (D) Annealing
Description : Silico-manganese steels (containing 0.7% Mn, 0.5% C and 2% Si) (A) Do not require heat treatment for any of its applications (B) Are used for leaf and coiled springs (C) Do not have good resilience properties (D) Is tempered at 850°C
Last Answer : (B) Are used for leaf and coiled springs
Description : A coal containing very high percentage of durain is called __________ coal. (A) Bright (B) Splint (C) Non-banded (D) Boghead
Last Answer : (B) Splint
Description : What do you think about Apple patenting the "slide to unlock" feature of its phones?
Last Answer : answer:No they should not be able. This way whoever does something new can pattern it and no other company can produce similar items. Just think a bit. If the first cell was patterned by ... perform the process and get something different. Since Steve died apple took a fall and feel attacked .
Description : Patenting New Invention Ideas?
Last Answer : The simple answer is no†you cannot patent an idea for an invention. The invention itself has to be produced or a patent application containing the invention must be filed with the U.K. Patent and Trademark Office ... get a patent, and when to file a patent. Here are a few things to keep in mind.
Description : Patenting is defined as the cooling below the freezing point of water. a) True b) False
Last Answer : b) False
Description : Ethical norms in research do not involve guidelines for: (A) Thesis format (B) Copyright (C) Patenting policy (D) Data sharing policies
Last Answer : (A) Thesis format
Description : Annealing of cast iron (A) Softens it to facilitate machining (B) Decreases the free carbon (C) Increases the strength (D) None of these
Description : Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30
Last Answer : (B) 25
Description : Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace
Last Answer : (C) Salt bath furnace
Description : Compound A is extracted from a solution of A + B into a pure solvent S. A Co-current unit is used for the liquid-liquid extraction. The inlet rate of the solution containing A is 200 moles of B/hr.m2 and the ... extraction achieved in the unit is (A) 25% (B) 50% (C) 70% (D) 90%
Last Answer : (B) 50%
Description : Which of the following would require least amount of secondary air for combustion? (A) Coke breeze containing 25% ash and 2% volatile matter (B) Anthracite containing 10% volatile matter and 8% ash ... ash and 25% volatile matter (D) Semi-bituminous coal containing 25% ash and 20% volatile matter
Last Answer : (A) Coke breeze containing 25% ash and 2% volatile matter
Description : An alloy of iron containing 4% carbon is called (A) High carbon steel (B) Wrought iron (C) Mild steel (D) None of these
Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon
Last Answer : (D) Plain carbon
Description : When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if ... ) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use
Last Answer : b) None if they were in a sealed vacuum pack prior to use
Description : A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel
Last Answer : (C) Invar
Description : Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) ... resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium
Last Answer : (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives
Description : Caustic soda is produced in a mercury cell having anode and cathode made respectively of moving mercury and (A) Moving mercury and graphite (B) Graphite and moving mercury (C) Moving mercury and carbon (D) Moving mercury and crimped steel wire
Last Answer : (B) Graphite and moving mercury
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon stee
Last Answer : (C) Carbides
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon steel
Last Answer : (A) Mild steel
Description : The minimum carbon content in steel should be __________ percent for it to respond to a hardening treatment. (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8
Description : The figure below shows three steps (A, B, C) of Polymerase Chain Reaction (PCR). Select the option giving correct identification together with what it represents? A. B. C ds DNA 3 5 5 3 ... - extension in the presence of heat stable DNA polymerase (d) A - annealing with two sets of primers
Last Answer : (c) C - extension in the presence of heat stable DNA polymerase
Description : For the irreversible reaction, Ca+ 2C = Ca C2, Δ H°298 = - 60000 J . mole-1. If a system initially containing 2 moles of calcium, 3 moles of carbon and 1 mole of calcium carbide is allowed to react to completion, the heat evolved ... will be (A) 30,000 J (B) 60,000 J (C) 90,000 J (D) 2,40,000 J
Last Answer : (C) 90,000 J
Description : The Minimum percentage of secondary steel in slabs for Fe- 415 grade steel should be __________ of Gross cross-section area [ A ] 0.12% [ B ] 0.15% [ C ] 0.20% [ D ] 0.25%
Last Answer : [ A ] 0.12%