Description : The heat treatment process applied to cold formed steel parts is (A) Normalising (B) Tempering (C) Artificial ageing (D) Solution annealing
Last Answer : (D) Solution annealing
Description : Which of the following heat treatment processes is used for softening the hardened material? (A) Normalising (B) Tempering (C) Annealing (D) None of these
Last Answer : (B) Tempering
Description : The heat treatment process to which castings and the steel balls produced by cold heading are subjected is (A) Tempering (B) Normalising (C) Annealing (D) None of these
Last Answer : (B) Normalising
Description : Which of the following heat treatment processes is usually applied to castings? (A) Tempering (B) Annealing (C) Normalising (D) Carburising
Last Answer : (D) Carburising
Description : A post weld heat treatment may also be of benefit in minimizing the risk of weld decay, this heat treatment would be called? a) Stress relief b) Normalizing c) Quench and Tempering d) Solution treatment over 1000 °C
Last Answer : d) Solution treatment over 1000 °C
Description : Why is post-weld heat treatment (stress relieving) sometimes necessary for welded vessels?
Last Answer : During the welding process, the two metal pieces being joined are subject to extreme temperatures and can cause the crystalline structure of the metal to pass through various metallurgical phases. As a ... composition of the metals. Holding temperatures can range from 1100-1350 °F (593- 732 °C).
Description : Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising
Last Answer : (A) Normalising
Description : __________ of hard alloy and tool steel is done to make it easily machinable. (A) Case carburising (B) Tempering (C) Normalising (D) Annealing
Description : . To improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing
Last Answer : (A) Spheroidising
Description : Hardened steel is softened by (A) Normalising (B) Tempering (C) Annealing (D) Carburising
Description : Spheroidising of a material is a/an __________ process. (A) Normalising (B) Annealing (C) Tempering (D) Hardening
Last Answer : (B) Annealing
Description : Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness
Last Answer : (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness Share
Description : Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called (A) Tempering (B) Hardening (C) Annealing (D) Normalising
Last Answer : Option C
Description : Machinability of hard alloys and tool steels is improved by (A) Spheroidising (B) Annealing (C) Tempering (D) Normalising
Last Answer : Option B
Description : o improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing
Last Answer : Option A
Description : Pick out the wrong statement. (A) Both annealing and normalising release the internal stresses of the material besides improving the mechanical properties (B) Low carbon steel does not respond to ... are also used for surface hardening (D) Martempering of a material is a hardening process
Description : Elimination of brittleness resulting from welding of saw blades is done by __________ of the welded portion. (A) Annealing (B) Toughening (C) Work hardening (D) Tempering
Last Answer : (A) Annealing
Description : Cold worked steel parts are normally subjected to (A) Normalising (B) Hardening (C) Annealing (D) Shot peening
Last Answer : (C) Annealing
Description : Nitriding of steel is a process for (A) Case hardening (B) Spheroidising (C) Normalising (D) Annealing
Last Answer : (A) Case hardening
Description : Globular form of cementite is formed during the __________ process. (A) Spheroidising (B) Hardening (C) Annealing (D) Normalising
Last Answer : (B) Hardening
Description : What is meant by the term PWHT? a) Pipe weld heat treatment b) Pre weld heat treatment c) Post weld hydrogen tearing d) Post weld het treatment
Last Answer : d) Post weld het treatment
Description : Which of the following is a heat treatment furnace? (A) Muffle furnace (B) Annealing furnace (C) Reheating furnace (D) Rotary kiln
Last Answer : (B) Annealing furnace
Description : The heat treatment to which the steel wire containing > 0.25% carbon is subjected to is (A) Full annealing (B) Bright annealing (C) Patenting (D) None of these
Last Answer : C) Patenting
Description : In the event of any disagreement between the relieved and the relieving officers, a reference should be made to the a) SSP/SP b) PMG c) Head of the Circle d) DG Post
Last Answer : c) Head of the Circle
Description : Tempering of a material does not improve its (A) Machinability (B) Toughness (C) Internal stress level (D) Softness
Last Answer : A) Machinability
Description : Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft
Last Answer : (D) Soft
Description : Case hardening of a material is (A) Followed by tempering or carburising (B) Preceded by its tempering (C) Done to get a soft ductile interior with a very hard surface (D) Carried out to get extreme hardness in its core
Last Answer : (D) Carried out to get extreme hardness in its core
Description : Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace
Last Answer : (C) Salt bath furnace
Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material
Description : Parathion and Malathion are (A) Pesticides (B) Plasticisers for unsaturated polyesters (C) Pain-relieving drugs (analgesic) (D) Tranquilisers
Last Answer : (A) Pesticides
Description : What is meant by simulated annealing in artificial intelligence? a) Returns an optimal solution when there is a proper cooling schedule b) Returns an optimal solution when there is no proper cooling ... not return an optimal solution when there is a proper cooling schedule d) None of the mentioned
Last Answer : a) Returns an optimal solution when there is a proper cooling schedule
Last Answer : Remove internal Stress
Description : When the steel is subjected to normalising, its __________ decreases. (A) Yield point (B) Ductility (C) Ultimate tensile strength (UTS)
Last Answer : (B) Ductility
Description : Normalising of a casting does not (A) Induce stresses in it (B) Refine its grain structure (C) Reduce segregation (D) Improve its mechanical properties
Last Answer : (A) Induce stresses in it
Description : Normalising of an object does not (A) Refine coarse grain structure obtained during hot working (B) Improve ductility (C) Improve yield strength (D) Improve mechanical properties
Last Answer : (B) Improve ductility
Description : Normalising does not __________ of a metal. (A) Improve machinability & tensile strength (B) Remove internal stresses (C) Refine the structure (D) Remove strains caused by cold working
Description : The figure below shows three steps (A, B, C) of Polymerase Chain Reaction (PCR). Select the option giving correct identification together with what it represents? A. B. C ds DNA 3 5 5 3 ... - extension in the presence of heat stable DNA polymerase (d) A - annealing with two sets of primers
Last Answer : (c) C - extension in the presence of heat stable DNA polymerase
Description : If a circular shaft is welded to the plate by means of circumferential fillet, then the shaft is subjected to torsional moment M. If throat of weld is t, then torsional shear stress is given by a) M/2πtr2 b) M/πtr2 c) M/4πtr2 d) None of the listed
Last Answer : a) M/2πtr2
Description : Find the bending stress in the top weld is if thickness of weld is t. Given P=15kN and e=120mm. a) 230/t b) 360/t c) 200/t d) None of the listed
Last Answer : b) 360/t
Description : Parallel fillet weld and transverse fillet weld both have the plane in which maximum shear stress occurs at 45’ to the leg dimension. a) True b) False
Last Answer : b) False
Description : Maximum shear stress in transverse fillet weld of leg h and length l is a) P/hl b) 1.21P/hl c) P/1.21hl d) None of the listed
Last Answer : b) 1.21P/hl
Description : A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal. a) PSinθ(Sinθ+Cosθ)/hl b) P(Sinθ+Cosθ)/hl c) Pcosθ(Sinθ+Cosθ)/hl d) None of the listed
Last Answer : a) PSinθ(Sinθ+Cosθ)/hl
Description : Any other known ways of relieving a headache?
Last Answer : Caffeine actually helps a lot. So does water. My aunt (a registered nurse) says that most headaches are due to dehydration. I tend to believe her. Normally when I get one I chug a liter of water and take a nap for a hour. When I wake up I am fine.
Description : Tips for relieving menstrual cramps?
Last Answer : Gah, I feel so bad for you. I hate when nothing works. I curl up in a little ball with a heating pad and take a nap. Medicine does nothing for cramps for me. I found that running maybe because I ... helps. It hurts for the first few minutes, but then it goes away and I can continue on with my day.
Description : Any tips for relieving boredom?
Last Answer : play BOOOGIES
Description : What is the name of the syrup for relieving nervous weakness ?
Last Answer : Jinsant Syrup will be fine