Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure vessel used for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Multistage operation (as in the case of catalytic oxidation of SO2
) is not
carried out for NH3 synthesis, because of
(A) Comparatively higher pressure drop
(B) High cost of the high pressure vessel used for the reactor
(C) Higher pumping cost
(D) Chances of entrainment and disturbance of catalyst bed
by

1 Answer

Answer :

(B) High cost of the high pressure vessel used for the reactor
by

Related questions

Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) NH3 synthesis reaction

Fluidised bed reactor is characterised by (A) Uniformity of temperature (B) Comparatively smaller equipment (C) Very small pressure drop (D) Absence of continuous catalyst regeneration facility

Description : Fluidised bed reactor is characterised by (A) Uniformity of temperature (B) Comparatively smaller equipment (C) Very small pressure drop (D) Absence of continuous catalyst regeneration facility

Last Answer : (A) Uniformity of temperature

In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to SO3 can be increased by (A) Increasing the oxygen concentration (B) Putting more quantity of V2O5 catalyst in the converter (C) Removing some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Description : In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to ... some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Last Answer : (C) Removing some quantity of SO3 during intermediate stage

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first compartment (C) Oxidation of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Description : Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first ... of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Description : The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Last Answer : (A) Jacketed liquid phase CSTR

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Description : In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Last Answer : (C) Catalytic homogenous

An example of autothermal reactor operation is (A) Sulphur dioxide oxidation (B) Ethylene oxidation (C) Benzene oxidation (D) Ammonia synthesis

Description : An example of autothermal reactor operation is (A) Sulphur dioxide oxidation (B) Ethylene oxidation (C) Benzene oxidation (D) Ammonia synthesis

Last Answer : (B) Ethylene oxidation

In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Description : In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick up the correct statement from the following: (A) Head loss in smaller size pipes at equal velocities, is less (B) Cost of pumping is less in smaller size pipes (C) Cost of smaller pipes is comparatively more (D) None of these

Description : Pick up the correct statement from the following:  (A) Head loss in smaller size pipes at equal velocities, is less  (B) Cost of pumping is less in smaller size pipes  (C) Cost of smaller pipes is comparatively more  (D) None of these 

Last Answer : (D) None of these 

Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons(D) None of these

Description : Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons (D) None of these

Last Answer : (C) Alkylation of hydrocarbons

Promoter used in NH3 synthesis catalyst is (A) K2O (B) SiO3 (C) V2O5 (D) U2O3

Description : Promoter used in NH3 synthesis catalyst is (A) K2O (B) SiO3 (C) V2O5 (D) U2O3

Last Answer : (C) V2O5

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in a reaction involving many steps is the fastest step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Description : Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in ... step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Last Answer : (A) A lower temperature favours the reaction of lower activation energy

In continuous fluidisation (A) Solids are completely entrained (B) The pressure drop is less than that for batch fluidisation (C) There is no entrainment of solids (D) Velocity of the fluid is very small

Description : In continuous fluidisation (A) Solids are completely entrained (B) The pressure drop is less than that for batch fluidisation (C) There is no entrainment of solids (D) Velocity of the fluid is very small

Last Answer : (A) Solids are completely entrained

. Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Last Answer : (D) Platinum

Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Last Answer : Option B

Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Description : Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Last Answer : (C) K2O

If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 (as per Le Chatelier's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Description : If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 ( ... 's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Last Answer : (A) Decreases

. Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Description : Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Last Answer : (C) Increasing the temperature

Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Description : Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Last Answer : (A) Can give ammonia synthesis gas (H2 + N2 )

Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor(C) Cannot use coking coal(D) Operate at very high pressure

Description : Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Last Answer : (A) Can give ammonia synthesis gas (H2 + N2 )

Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Description : Bed pressure drop in an air fluidised bed of catalyst particles (ρp = 200 kg/m3, Dp = 0.05 cm) of 60 cm bed depth and bed porosity of 0.5 expressed in cm of water (manometer) is (A) 90 (B) 60 (C) 45 (D) 30

Last Answer : (B) 60

To gain market share Lada entered car markets with a comparatively low price. One of the negative side effects of taking this pricing position is A)a negative impact on consumers' perceptions of quality. B)competitors can match the price. C)a high return on investment levels affecting tax balances owed. D)poor survival chances in the market.

Description : To gain market share Lada entered car markets with a comparatively low price. One of the negative side effects of taking this pricing position is A)a negative impact on consumers' perceptions of ... high return on investment levels affecting tax balances owed. D)poor survival chances in the market.

Last Answer : A)a negative impact on consumers' perceptions of quality.

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Which of the following will give maximum gas conversion? (A) Fixed bed reactor (B) Fluidised bed reactor (C) Semi-fluidised bed reactor (D) Plug-flow catalytic reactor

Description : Which of the following will give maximum gas conversion? (A) Fixed bed reactor (B) Fluidised bed reactor (C) Semi-fluidised bed reactor (D) Plug-flow catalytic reactor

Last Answer : (C) Semi-fluidised bed reactor

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates(D) All (A), (B) and (C)

Description : For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

From among the following, choose one which is not an exothermic process. (A) Methanol synthesis (B) Catalytic cracking (C) Ammonia synthesis (D) Oxidation of sulphu

Description : From among the following, choose one which is not an exothermic process. (A) Methanol synthesis (B) Catalytic cracking (C) Ammonia synthesis (D) Oxidation of sulphu

Last Answer : (B) Catalytic cracking

Pressure drop in a fluidised bed reactor is __________ that in a similar packed bed reactor. (A) Less than (B) Greater than (C) Same as (D) None of these

Description : Pressure drop in a fluidised bed reactor is __________ that in a similar packed bed reactor. (A) Less than (B) Greater than (C) Same as (D) None of these

Last Answer : (B) Greater than

Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Description : Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Last Answer : (B) Slurry

Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low (B) Very high pressure is required resulting in costly pressure vessel (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Description : Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low ... (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Last Answer : (A) Rate of reaction is very low

Self-priming centrifugal pump can be used for (A) Booster service (B) Pumping liquid fertilisers (e.g. liquid NH3 ) (C) Pumping industrial wastes (D) All (A), (B) and (C)

Description : Self-priming centrifugal pump can be used for (A) Booster service (B) Pumping liquid fertilisers (e.g. liquid NH3 ) (C) Pumping industrial wastes (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Umf is the minimum fluidisation velocity for a bed of particles. An increase in the superficial gas velocity from 2 Umf to 2.5 Umf results in (all velocities are smaller than the entrainment velocity of the particles) nochange in the(A) Drag on particles(B) Drag on column walls(C) Bed height(D) Bed voidage

Description : Umf is the minimum fluidisation velocity for a bed of particles. An increase in the superficial gas velocity from 2 Umf to 2.5 Umf results in (all velocities are smaller than the entrainment velocity of the particles ... (A) Drag on particles (B) Drag on column walls (C) Bed height (D) Bed voidage

Last Answer : (C) Bed height

Make up water is supplied during cooling tower operation to compensate for water losses due to (A) Evaporation(B) Blowdown(C) Entrainment(D) All (A), (B) & (C)

Description : Make up water is supplied during cooling tower operation to compensate for water losses due to (A) Evaporation (B) Blowdown (C) Entrainment (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Description : In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Last Answer : (C) Foaming of the solution

Glycerine is used as a coolant in cooling of some engines instead of water, because (A) Its higher boiling point (290°C) increases its heat carrying capacity (B) Comparatively less weight of coolant is required (C) Smaller radiator can be used (D) All a, b & c

Description : Glycerine is used as a coolant in cooling of some engines instead of water, because (A) Its higher boiling point (290°C) increases its heat carrying capacity (B) Comparatively less weight of coolant is required (C) Smaller radiator can be used (D) All a, b & c

Last Answer : (D) All a, b & c

In __________ converter for ammonia synthesis, the catalyst is arranged in the form of a single continuous bed. (A) Fauser-Montecatini (B) Claude (C) Uhde(D) Kellogg

Description : In __________ converter for ammonia synthesis, the catalyst is arranged in the form of a single continuous bed. (A) Fauser-Montecatini (B) Claude (C) Uhde (D) Kellogg

Last Answer : (B) Claude

In the ammonia synthesis reaction, N2 + 3H2 ⇌ 2NH3 + 22.4 kcal, the formation of NH3 will be favoured by (A) High temperature (B) Low pressure (C) Low temperature only (D) Both low temperature and high pressure

Description : In the ammonia synthesis reaction, N2 + 3H2 ⇌ 2NH3 + 22.4 kcal, the formation of NH3 will be favoured by (A) High temperature (B) Low pressure (C) Low temperature only (D) Both low temperature and high pressure

Last Answer : (D) Both low temperature and high pressure

Which of the following pollutants is absent in the emissions from a fertiliser plant? (A) SO2 & SO3 (B) NO2 (C) NH3 (D) CO

Description : Which of the following pollutants is absent in the emissions from a fertiliser plant? (A) SO2 & SO3 (B) NO2 (C) NH3 (D) CO

Last Answer : (D) CO

. Bromides contained in hot mother liquor is treated with __________ during manufacture of bromine from sea water. (A) SO3 (B) Cl2 (C) NH3 (D) SO2

Description : . Bromides contained in hot mother liquor is treated with __________ during manufacture of bromine from sea water. (A) SO3 (B) Cl2 (C) NH3 (D) SO2

Last Answer : (B) Cl2

Which is not a refrigerant? (A) SO2 (B) NH3 (C) CCl2F2 (D) C2H4Cl2

Description : Which is not a refrigerant? (A) SO2 (B) NH3 (C) CCl2F2 (D) C2H4Cl2

Last Answer : (D) C2H4Cl2

Fuel oil is subjected to visbreaking to reduce its (A) Pour point (B) Viscosity (C) Pressure drop on pumping (D) All (A), (B) and (C

Description : Fuel oil is subjected to visbreaking to reduce its (A) Pour point (B) Viscosity (C) Pressure drop on pumping (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Low viscosity absorbent is preferred for reasons of (A) Rapid absorption rates and good heat transfer characteristics (B) Improved flooding characteristics (C) Low pressure drop on pumping (D) All (A), (B) and (C)

Description : Low viscosity absorbent is preferred for reasons of (A) Rapid absorption rates and good heat transfer characteristics (B) Improved flooding characteristics (C) Low pressure drop on pumping (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Description : During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on ... be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Last Answer : (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced)

In Lurgi coal gasifier, (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Larger quantity of coal can be processed

Description : In Lurgi coal gasifier, (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Larger quantity of coal can be processed

Last Answer : (D) Larger quantity of coal can be processed

In the Lurgi coal gasifier (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Large quantity of coal can be processed

Description : In the Lurgi coal gasifier (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Large quantity of coal can be processed

Last Answer : (D) Large quantity of coal can be processed