Description : High content copper amalgam . . . a. generally requires greater energy to accomplish trituration b. should be placed rapidly in large increments c. Continues to leak since the ... not cause galvanism in oral environment e. is equally effective as conventional alloys in clinical studies
Last Answer : a. generally requires greater energy to accomplish trituration
Description : . Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation
Last Answer : (C) Give elasticity & prevent cracking of the film
Description : Chilled iron castings are (A) Easily machinable (B) Soft on surface (C) Highly wear resistant (D) None of these
Last Answer : (C) Highly wear resistant
Description : Which of the following is an example of stress corrosion? (A) Season cracking of brass (B) Caustic embrittlement of steel (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : Option C
Description : Which of the following is the most prone to atmospheric corrosion? (A) Silver (B) Iron (C) Tin (D) Copper
Last Answer : (B) Iron
Description : Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these
Last Answer : (D) None of these
Description : Non-ferrous alloys used for making cutting tools need not have high (A) Abrasion resistance (B) Toughness (C) Red hardness (D) Cutting speed
Last Answer : (C) Red hardness
Description : Hastelloy C is a good material of construction in chemical process industry, since it is (A) Highly corrosion resistant and is readily fabricated (B) Relatively inexpensive although it can be ... most alkalis, particularly because of its copper content (D) Light and resists attack by acids
Last Answer : (D) Light and resists attack by acids
Description : Presence of manganese in alloy steel improves its (A) Corrosion resistance (B) Cutting ability (C) Abrasion resistance & toughness (D) Elasticity & creep resistance
Last Answer : (C) Abrasion resistance & toughness
Description : Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)
Last Answer : (C) Higher hardness
Description : 'Corrosion-resistant material' and 'noncorrodible material' will include which of the following ____________. A. plastics B. silver C. copper-nickel D. all of the above
Last Answer : Answer: D
Description : A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity
Last Answer : (A) More corrosion resistant
Description : The deterioration of a metal by an electrochemical process is commonly termed as – (1) Erosion (2) Corrosion (3) Passivation (4) Abrasion
Last Answer : (2) Corrosion Explanation: Corrosion can be defined as the deterioration of materials by chemical processes.
Description : The deterioration of a metal by an electrochemical process is commonly termed as (1) Erosion (2) Corrosion (3) Passivation (4) Abrasion
Last Answer : Corrosion
Description : Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution
Description : Zinc is not used (A) For producing zinc base die casting alloys (B) In its oxide form as pigments (C) As anode for corrosion prevention in boiler (D) As an alloying element in various bronzes
Last Answer : (D) As an alloying element in various bronzes
Description : Tin base and lead base alloys are used for bearing materials. Tin compared to lead has lower (A) Price (B) Corrosion resistance (C) Thermal conductivity (D) Abundant availability
Last Answer : (D) Abundant availability
Description : __________ polythene is most prone to stress-cracking (A) High density (B) Low density (C) Cross-linked (D) Linear low density
Last Answer : (A) High density
Description : Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction ... , a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C
Last Answer : (B) Presence of silicon in steel decreases its electrical resistance
Description : Identify the false statement (A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels (B) Pitting corrosion is usually very localised (C) Hydrogen embrittlement is facilitated by tensile stress (D) Stress corrosion cracking is facilitated by tensile stress
Last Answer : (A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels
Description : What steps can be taken to avoid stress corrosion cracking (SCC) in steel vessels used for storing anhydrous ammonia?
Last Answer : The U.S. National Board of Pressure Vessel Inspectors recommends the following in one of their classic articles: 1. Pressure vessels should be fully stress relieved or fabricated with heads that ... at least 0.2 percent water to inhibit SCC. Source: National Board of Pressure Vessel Inspectors
Description : Duriron is (A) Acid resistant, brittle and very hard (B) High silicon iron (C) Prone to breakage due to thermal expansion because of its very high coefficient of thermal expansion (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Lubrication of ERC and inserts in corrosion prone areas and platform line is done:- (a) Once in a month. (b) Once in a fortnight. (c) Once in a week. (d) Once in a year.*
Last Answer : (d) Once in a year.*
Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium
Last Answer : (D) Calorising is the process of coating steel with chromium
Description : Very high sulphur in pig iron makes (A) Its casting unsound (B) Its hard and machinable (C) Its brittle and malleable (D) All (A), (B) & (C)
Last Answer : (A) Its casting unsound
Description : __________ of hard alloy and tool steel is done to make it easily machinable. (A) Case carburising (B) Tempering (C) Normalising (D) Annealing
Last Answer : (B) Tempering
Description : _________ are normally subjected to sub-zero treatment. (A) Highly stressed parts (B) Gauges or precision parts (C) Cold rolled sheets (D) Non machinable materials
Last Answer : (B) Gauges or precision parts
Description : Which of the following defects are unlikely to be detected by normal radiographic technique? a) Intergranular corrosion cracking b) Porosity c) Slag d) Lack of penetration
Last Answer : a) Intergranular corrosion cracking
Description : Close inspection of a failed metal part reveals artifacts on the fracture surface commonly referred to as "striations" or "beach marks". This indicates the component failed as a result of: w) Sudden overloading x) Cyclical loading y) Stress corrosion cracking z) None of the above
Last Answer : ANSWER: X -- CYCLICAL LOADING
Description : The most resistant material to alkaline corrosion is (A) Duriron (B) Nickel (C) Aluminium (D) Karbate
Last Answer : (B) Nickel
Description : Lead is (A) Not resistant to corrosion (B) Used as a cathodic material (C) Not used as pigment (in its compound forms) for paints (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings
Last Answer : (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings
Description : Zinc is highly __________ at room temperature. (A) Ductile (B) Resistant to atmospheric corrosion (C) Malleable (D) Brittle
Last Answer : (B) Resistant to atmospheric corrosion
Description : Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility
Last Answer : (A) A low carbon steel (0.05 to 0.3% carbon)
Description : Most common stainless steel type 316, which is highly resistant to corrosion contains (A) 16-13% Cr 10-14% Ni and 2-3% Mo (B) 20-22% Cr, and 8-10% Ni (C) 2-4% Cr, 22% NI and 2-4% Mo (D) None of these
Last Answer : (A) 16-13% Cr 10-14% Ni and 2-3% Mo
Description : For platinum thermocouples, lead wires are made of (A) Copper & copper-nickel alloys (B) Copper & iron (C) Iron & nickel (D) Tin & nickel
Last Answer : (A) Copper & copper-nickel alloys
Description : Locomotive boiler tubes are made of __________ alloys. (A) Arsenic copper (B) Magnesium (C) Aluminium (D) Nickel
Last Answer : (A) Arsenic copper
Description : Dilute sulphuric acid is transported in __________ pipes. (A) Mild steel (B) Lead (C) Copper (D) Special alloys
Last Answer : (B) Lead
Description : Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel
Last Answer : (C) Stainless steel
Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron
Last Answer : (B) Manganese
Description : Muntz metal is a/an alloys of (A) Magnesium & tin (B) Ferrous material (C) Lead & tin (D) Copper & zinc
Last Answer : (D) Copper & zinc
Description : Nickel base alloys with __________ are known as monel metal. (A) Zinc (B) Tin (C) Copper (D) Molybdenum
Last Answer : (C) Copper
Description : Which of the following is not used as a bearing material? (A) Copper-lead alloys (B) Babbitts (C) Bronzes (D) Cermets
Last Answer : Option D
Description : What type of towel bars are more resistant to corrosion?
Last Answer : A ceramic of plastic towel bar will never corrode, a stainless steel bar will likely not corrode either.
Description : Which metals are very corrosion resistant?
Last Answer : Bronze.
Description : Wrought iron is resistant to rusting and corrosion due to the presence of
Last Answer : Wrought iron is resistant to rusting and corrosion due to the presence of A. Cementite `(Fe_(3)C)` B. ... 4)` Slages D. `MnSiO_(3)& FePO_(4)`slages
Description : Which of the following is false? (a) Mica is usually found in metamorphic and igneous rocks (b) Aluminium has the advantage over iron as it is resistant to corrosion (c) line is mostly used in galvanising iron and steel goods (d) Manganese is largely used in making fertilizers
Last Answer : Ans: (d)
Description : Stone ware pipes are A. Highly resistant to sulphide corrosion B. Highly impervious C. Hydraulically efficient because of their smooth interior surface D. Especially suited to pressure pipes
Last Answer : ANS: D
Description : The most corrosion-resistant metal?
Last Answer : Iridium
Description : Asbestos pipes are (A) Light in weight and easy to transport (B) Highly resistant to corrosion (C) High flexible to accommodate deflection upto 12° (D) All the above
Last Answer : (D) All the above
Description : Which of the following is not property of an alloy? a) strong b)resistant to corrosion c)hard d)Poor conductor of electricity
Last Answer : d)Poor conductor of electricity