Solidification time of a molten metal in a casting is proportional to (where, V = volume of metal & A = its surface area; in the casting) (A) V/A (B) V/A2 (C) V2/A (D) V2/A2

Solidification time of a molten metal in a casting is proportional to (where, V = volume of metal & A = its surface area; in the casting) (A) V/A
(B) V/A2
(C) V2/A
(D) V2/A2
by

1 Answer

Answer :

(D) V2/A2
by

Related questions

Rocks formed from molten magma solidification at earth surface is — rock a. Igneous b. Sedimentary c. Metamorphic d. None of these

Description : Rocks formed from molten magma solidification at earth surface is — rock a. Igneous b. Sedimentary c. Metamorphic d. None of these

Last Answer : a. Igneous

Uniform ramming of sand in green sand moulding process leads to (A) Reduced chance of gas porosity (B) Greater dimensional stability of the casting (C) Uniform flow of molten metal into the mould cavity (D) Less sand expansion type of casting defect

Description : Uniform ramming of sand in green sand moulding process leads to (A) Reduced chance of gas porosity (B) Greater dimensional stability of the casting (C) Uniform flow of molten metal into the mould cavity (D) Less sand expansion type of casting defect

Last Answer : Option B

Newton's law of viscosity, which states that the shear stress is proportional to the __________ Co-efficient of viscosity is called dynamic or absolute viscosity(where, V = velocity, Vg = velocity gradient). (A) V2 (B) 1/V2 (C) 1/Vg (D) Vg

Description : Newton's law of viscosity, which states that the shear stress is proportional to the __________ Co-efficient of viscosity is called dynamic or absolute viscosity(where, V = velocity, Vg = velocity gradient). (A) V2 (B) 1/V2 (C) 1/Vg (D) Vg

Last Answer : Option D

Internal energy of a gas obeying Van-Der-Waals equation of state, [p + (a/v2)] (V - b) = RT, depends upon its (A) Pressure & temperature (B) Pressure & specific volume (C) Temperature & specific volume (D) Temperature only

Description : Internal energy of a gas obeying Van-Der-Waals equation of state, [p + (a/v2)] (V - b) = RT, depends upon its (A) Pressure & temperature (B) Pressure & specific volume (C) Temperature & specific volume (D) Temperature only

Last Answer : (A) Pressure & temperature

The rock that results from solidification of molten lava from a volcano is an example of Which of the following? (1) Igneous rocks (2) Granite Rock (3) Basalt Rock (4) Magnetite

Description : The rock that results from solidification of molten lava from a volcano is an example of Which of the following? (1) Igneous rocks (2) Granite Rock (3) Basalt Rock (4) Magnetite

Last Answer : (1) Igneous rocks Explanation: Igneous rocks are formed through the cooling and solidification of magma (or lava).

The rock that results from solidification of molten lava from a volcano is an example of which of the following? (1) Igneous Rock (2) Granite Rock (3) Basalt Rock (4) Magnetite

Description : The rock that results from solidification of molten lava from a volcano is an example of which of the following? (1) Igneous Rock (2) Granite Rock (3) Basalt Rock (4) Magnetite

Last Answer : (1) Igneous Rock Explanation: Igneous rocks are formed through the cooling and solidification of magma (or lava). As hot, molten rock rises to the surface, it undergoes changes in temperature and ... Earth's crust. However, some are also formed on the surface as a result of volcanic activity.

The rock formed from the solidification of molten matter (magma) is called: (A) Sedimentary rock (B) Metamorphic rock (C) Igneous rock (D) none of the above

Description : The rock formed from the solidification of molten matter (magma) is called: (A) Sedimentary rock (B) Metamorphic rock (C) Igneous rock (D) none of the above

Last Answer : Answer: Option C

The rock that results from solidification of molten lava from a volcano is an example of which of the following ? (1) Igneous Rock (2) Granite Rock (3) Basalt Rock (4) Magnetite

Description : The rock that results from solidification of molten lava from a volcano is an example of which of the following ? (1) Igneous Rock (2) Granite Rock (3) Basalt Rock (4) Magnetite

Last Answer : Igneous Rock 

Resistance of an electrical conductor is proportional to its (where, l = length and A = cross-sectional area of the conductor) (A) A (B) l (C) A2 (D) Both 'a' & 'b'

Description : Resistance of an electrical conductor is proportional to its (where, l = length and A = cross-sectional area of the conductor) (A) A (B) l (C) A2 (D) Both 'a' & 'b'

Last Answer : (D) Both 'a' & 'b'

The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) (A) A (B) D (C) 1/A (D) 1/A2

Description : The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) (A) A (B) D (C) 1/A (D) 1/A2

Last Answer : (C) 1/A

According to equation of continuity, (A) w1a1 = w2a2 (B) w1v1 = w2v2 (C) a1v1 = a2v2 (D) a1/v1 = a2/v2

Description : According to equation of continuity, (A) w1a1 = w2a2 (B) w1v1 = w2v2 (C) a1v1 = a2v2 (D) a1/v1 = a2/v2

Last Answer : Answer: Option C

Name a liquefied metal which expands on solidification.

Description : Name a liquefied metal which expands on solidification.

Last Answer : Gallium (Ga) is a silvery white metal, liquid at room temp. It expands by 3.1% on solidifica-tion.

Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a particle of a particular size is proportional to the square root of the surface to volume ratio of the product (C) Work required in crushing is proportional to the new surface created (D) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Description : Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a ... ) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Last Answer : (C) Work required in crushing is proportional to the new surface created

Which Rocks are formed by the solidification of lava on the earth’s surface? -Do You Know?

Description : Which Rocks are formed by the solidification of lava on the earth’s surface? -Do You Know?

Last Answer : Intrusive rocks are formed from magma that cools and solidifies within the crust of the planet. When lava comes out of a volcano and solidifies into extrusive igneous rock, also called volcanic, the rock cools very quickly.

Which Rocks are formed by the solidification of lava on the earth’s surface?

Description : Which Rocks are formed by the solidification of lava on the earth’s surface?

Last Answer : Basalts.

Which Rocks are formed by the solidification of lava on the earth’s surface?

Description : Which Rocks are formed by the solidification of lava on the earth’s surface?

Last Answer : Basalts.

As the velocity V and thus the Reynolds number of a flow past a sphere increases from very low value, the drag force for Re << 1 (A) Increases linearly with V (B) Decreases linearly with V (C) Decreases as V2 (D) None of these

Description : As the velocity V and thus the Reynolds number of a flow past a sphere increases from very low value, the drag force for Re

Last Answer : (A) Increases linearly with V

essure drop (Δp) for a fluid flowing in turbulent flow through a pipe is a function of velocity (V) as (A) V1.8 (B) V-0.2 (C) V2.7 (D) V

Description : essure drop (Δp) for a fluid flowing in turbulent flow through a pipe is a function of velocity (V) as (A) V1.8 (B) V-0.2 (C) V2.7 (D) V

Last Answer : (D) V

Which of the following represents the Virial equation of state? (A) T = [RT/(V- b)] - [a/√T. V(V + b)] (B) PV/RT = 1 + (B/V) + (C/V2) + …… (C) n1u2 + μ2μ1 = 0 (D) None of these

Description : Which of the following represents the Virial equation of state? (A) T = [RT/(V- b)] - [a/√T. V(V + b)] (B) PV/RT = 1 + (B/V) + (C/V2) + …… (C) n1u2 + μ2μ1 = 0 (D) None of these

Last Answer : (B) PV/RT = 1 + (B/V) + (C/V2) + ……

Which of the following is Virial equation of state? (A) (p + a/V2)(V - b) = nRT (B) PV = nRT (C) PV = A + B/V + C/V2 + D/V3 + ... (D) None of these

Description : Which of the following is Virial equation of state? (A) (p + a/V2)(V - b) = nRT (B) PV = nRT (C) PV = A + B/V + C/V2 + D/V3 + ... (D) None of these

Last Answer : (C) PV = A + B/V + C/V2 + D/V3 + ...

The compressibility factor of a gas is given by (where, V1 = actual volume of the gas V2 = gas volume predicted by ideal gas law) (A) V1/V2 (B) V2/V1 (C) V1- V2 (D) V1.V2

Description : The compressibility factor of a gas is given by (where, V1 = actual volume of the gas V2 = gas volume predicted by ideal gas law) (A) V1/V2 (B) V2/V1 (C) V1- V2 (D) V1.V2

Last Answer : (A) V1/V2

The expression for entropy change given by, ΔS = nR ln (V2/V1) + nCvln (T2/T1) is valid for (A) Reversible isothermal volume change (B) Heating of a substance (C) Cooling of a substance (D) Simultaneous heating and expansion of an ideal gas

Description : The expression for entropy change given by, ΔS = nR ln (V2/V1) + nCvln (T2/T1) is valid for (A) Reversible isothermal volume change (B) Heating of a substance (C) Cooling of a substance (D) Simultaneous heating and expansion of an ideal gas

Last Answer : (D) Simultaneous heating and expansion of an ideal gas

What is the equation for the work done by a constant temperature system?  A. W = mRTln(V2-V1)  B. W = mR( T2-T1 ) ln( V2/V1)  C. W = mRTln (V2/V1)  D. W = RT ln (V2/V1) Formula : W=∫ pdV lim1,2 ∫ = mRT / V

Description : What is the equation for the work done by a constant temperature system?  A. W = mRTln(V2-V1)  B. W = mR( T2-T1 ) ln( V2/V1)  C. W = mRTln (V2/V1)  D. W = RT ln (V2/V1) Formula : W=∫ pdV lim1,2 ∫ = mRT / V

Last Answer : W = mRTln (V2/V1)

Q No: 251 In a sludge digestion tank if the moisture content of sludge V1 litres is reduced from p1 % to p2 % the volume V2 is A. [(100 + P1)/(100 – P2)] V1 B. [(100 – P1)/(100 + P2)] V1 C. [(100 – P1)/(100 – P2)] V1 D. [(100 + P2)/(100 – P1)] V1

Description : Q No: 251 In a sludge digestion tank if the moisture content of sludge V1 litres is reduced from p1 % to p2 % the volume V2 is A. [(100 + P1)/(100 – P2)] V1 B. [(100 – P1)/(100 + P2)] V1 C. [(100 – P1)/(100 – P2)] V1 D. [(100 + P2)/(100 – P1)] V1

Last Answer : ANS: C

Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Last Answer : 12 kJ

Twenty grams of oxygen gas are compressed at a constant temperature of 30 ˚C to 5%of their original volume. What work is done on the system.  A.824 cal  B.924 cal  C.944 cal  D.1124 cal Formula: W = -mRTln (V2/V1) Where R = (1.98 cal/gmole·K) (32 g/gmole)

Description : Twenty grams of oxygen gas are compressed at a constant temperature of 30 ˚C to 5%of their original volume. What work is done on the system.  A.824 cal  B.924 cal  C.944 cal  D.1124 cal Formula: W = -mRTln (V2/V1) Where R = (1.98 cal/gmole·K) (32 g/gmole)

Last Answer : 1124 cal

The melting point of paraffin wax (which contracts on solidification) __________ with pressure rise. (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Description : The melting point of paraffin wax (which contracts on solidification) __________ with pressure rise. (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Last Answer : (A) Increases

Boyle's law states that A. pressure of a gas is inversely proportional to its volume i.e. P × V = constant B. pressure of a gas is directly proportional to its volume i.e. P⁄V = constant C. pressure of a gas is inversely proportional to the square of its volume i.e. P × V² = constant D. pressure of a gas is directly proportional to the square of its volume i.e. P ⁄ V² = constant

Description : Boyle's law states that A. pressure of a gas is inversely proportional to its volume i.e. P V = constant B. pressure of a gas is directly proportional to its volume i.e. P⁄V = constant C. ... of a gas is directly proportional to the square of its volume i.e. P ⁄ V² = constant

Last Answer : pressure of a gas is inversely proportional to its volume i.e. P × V = constant

For crushing of solids, the Rittinger's law states that the work required for crushing is proportional to(A) The new surface created(B) The size reduction ratio(C) The change in volume due to crushing(D) None of these

Description : For crushing of solids, the Rittinger's law states that the work required for crushing is proportional to (A) The new surface created (B) The size reduction ratio (C) The change in volume due to crushing (D) None of these

Last Answer : (A) The new surface created

Bond crushing law (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law (B) Is less realistic in estimating the power requirements of commercial crushers (C) States that the work required to form particle of any size from very large feed is proportional to the square root of the volume to surface ratio of the product (D) States that the work required for the crushing is proportional to the new surface created

Description : Bond crushing law (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law (B) Is less realistic in estimating the power requirements of commercial crushers ( ... (D) States that the work required for the crushing is proportional to the new surface created

Last Answer : (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown can BEST be achieved by: A. Hand burnishing B. Mechanical burnishing C. Using finishing burs and points to remove the enamel margins on the tooth D. Making a new impression and remaking the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

if pressure P is inversely proportional to volume (V) at constant temperature, then PV is constant (True/False)

Description : if pressure P is inversely proportional to volume (V) at constant temperature, then PV is constant (True/False)

Last Answer : if pressure P is inversely proportional to volume (V) at constant temperature, then PV is constant (True/False)

For spheres, the surface shape factor is given by (where, A = area, V = volume, and D = diameter) (A) π = (A/D2 ) (B) π/6 = (V/D3 ) (C) AD/V (D) None of these

Description : For spheres, the surface shape factor is given by (where, A = area, V = volume, and D = diameter) (A) π = (A/D2 ) (B) π/6 = (V/D3 ) (C) AD/V (D) None of these

Last Answer : (A) π = (A/D2 )

Sphericity for a non-spherical particle is given by (where, V and S are volume and surface area respectively of one particle. and, D = equivalent diameter of particle). (A) 6.V/D.S(B) V/6D.S (C) D.S/V (D) V/D.S

Description : Sphericity for a non-spherical particle is given by (where, V and S are volume and surface area respectively of one particle. and, D = equivalent diameter of particle). (A) 6.V/D.S (B) V/6D.S (C) D.S/V (D) V/D.S

Last Answer : (B) V/6D.S (C) D.S/V (D) V/D.S

Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Description : Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Last Answer : (C) Storage tank for storing brine and caustic soda

Addition of silicon to cast iron (A) Promotes graphite module formation (B) Improves its ductility (C) Does not promote graphite flakes formation (D) Increases the fluidity of molten metal

Description : Addition of silicon to cast iron (A) Promotes graphite module formation (B) Improves its ductility (C) Does not promote graphite flakes formation (D) Increases the fluidity of molten metal

Last Answer : Option D

An increase in the NH3 /CO2 ratio in urea manufacture results in (A) Increased degree of conversion of CO2 to urea (B) Decreased degree of conversion of NH3 to urea (C) Decreased yield of urea (D) Decreased specific volume of molten mass

Description : An increase in the NH3 /CO2 ratio in urea manufacture results in (A) Increased degree of conversion of CO2 to urea (B) Decreased degree of conversion of NH3 to urea (C) Decreased yield of urea (D) Decreased specific volume of molten mass

Last Answer : (A) Increased degree of conversion of CO2 to urea

Which is the most commonly used molten metal for cooling of nuclear reactors? (A) Calcium (B) Sodium (C) Mercury (D) Zinc

Description : Which is the most commonly used molten metal for cooling of nuclear reactors? (A) Calcium (B) Sodium (C) Mercury (D) Zinc

Last Answer : (B) Sodium

Which of the following reactors is operated at high neutron flux and low power level? (A) Breeder reactor (B) Research reactor (C) Heterogeneous reactor (D) Liquid metal (e.g., molten sodium) cooled reactor

Description : Which of the following reactors is operated at high neutron flux and low power level? (A) Breeder reactor (B) Research reactor (C) Heterogeneous reactor (D) Liquid metal (e.g., molten sodium) cooled reactor

Last Answer : (B) Research reactor

Use of molten metal as a coolant in fast breeder reactor helps in (A) Rapid heat transfer from the core (B) Accelerating the reaction rate in the core (C) Breeding neutrons (D) Accelerating the neutrons

Description : Use of molten metal as a coolant in fast breeder reactor helps in (A) Rapid heat transfer from the core (B) Accelerating the reaction rate in the core (C) Breeding neutrons (D) Accelerating the neutrons

Last Answer : (A) Rapid heat transfer from the core

Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Description : Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Last Answer : (C) Fast breeder

The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Description : The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Last Answer : (A) Electromagnetic

Which of the following is not used as a medium for high temperature heating ? (A) Dowtherm (B) Mercury (C) Liquid metal (e.g. molten sodium) (D) Fused salts (e.g., an eutectic mixture of 53% KNO3 , 40% NaNO2and 7% NaNO3 )

Description : Which of the following is not used as a medium for high temperature heating ? (A) Dowtherm (B) Mercury (C) Liquid metal (e.g. molten sodium) (D) Fused salts (e.g., an eutectic mixture of 53% KNO3 , 40% NaNO2and 7% NaNO3 )

Last Answer : (B) Mercury

A pycnometer is used for the measurement of (A) Flow rate of molten metal (B) Specific gravity of a liquid (C) Composition of alloys (D) Concentration of a solution

Description : A pycnometer is used for the measurement of (A) Flow rate of molten metal (B) Specific gravity of a liquid (C) Composition of alloys (D) Concentration of a solution

Last Answer : Option B

Dephosphorization of molten pig iron is favoured by (A) Oxidising and basic slag (B) Reducing and basic slag (C) High activity co-efficient of phosphorous in metal (D) Oxidising and neutral slag

Description : Dephosphorization of molten pig iron is favoured by (A) Oxidising and basic slag (B) Reducing and basic slag (C) High activity co-efficient of phosphorous in metal (D) Oxidising and neutral slag

Last Answer : Option B

Two ores A1 and A2 of a metal M show the following reactivity: `A_(1)=CuCo_(3).Cu(OH)_(3),S=Cu` `P=Cu_(2)I_(2): G=SO_(2)` . Then `A_(2)` is

Description : Two ores A1 and A2 of a metal M show the following reactivity: `A_(1)=CuCo_(3).Cu(OH)_(3),S=Cu` `P=Cu_(2)I_(2): G=SO_(2)` . Then `A_(2)` is

Last Answer : Two ores A1 and A2 of a metal M show the following reactivity: `A_(1)=CuCo_(3).Cu(OH)_(3),S=Cu` `P=Cu_(2) ... )` B. `CuO` C. `CuCO_(3)` D. `Cu_(2)S`

As per Gilliland's equation, the diffusivity is (A) Directly proportional to 'T 1.5 ' (B) Inversely proportional to 'P' (C) Dependent on the molecular volume & molecular weight of components (D) All 'a', 'b' & 'c'

Description : As per Gilliland's equation, the diffusivity is (A) Directly proportional to 'T 1.5 ' (B) Inversely proportional to 'P' (C) Dependent on the molecular volume & molecular weight of components (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

The phase transition of a liquid to a solid  a. Solidification  b. Freezing  c. Fusion  d. All of these

Description : The phase transition of a liquid to a solid  a. Solidification  b. Freezing  c. Fusion  d. All of these

Last Answer : All of these