Identify the false statement (A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels (B) Pitting corrosion is usually very localised (C) Hydrogen embrittlement is facilitated by tensile stress (D) Stress corrosion cracking is facilitated by tensile stress

Identify the false statement
(A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels
(B) Pitting corrosion is usually very localised
(C) Hydrogen embrittlement is facilitated by tensile stress
(D) Stress corrosion cracking is facilitated by tensile stress
by

1 Answer

Answer :

(A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels
by

Related questions

Ferric stainless steels compared to austenitic stainless steels (A) Have lower corrosion resistance (B) Are harder to fabricate (C) Are less ductile and hence less suitable for cold pressing (D) All (A), (B) and (C)

Description : Ferric stainless steels compared to austenitic stainless steels (A) Have lower corrosion resistance (B) Are harder to fabricate (C) Are less ductile and hence less suitable for cold pressing (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is an example of stress corrosion? (A) Season cracking of brass (B) Caustic embrittlement of steel (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Which of the following is an example of stress corrosion? (A) Season cracking of brass (B) Caustic embrittlement of steel (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : Option C

18/8 steel is a/an __________ stainless steel. (A) Austenitic (B) Ferritic (C) Martensitic (D) None of these

Description : 18/8 steel is a/an __________ stainless steel. (A) Austenitic (B) Ferritic (C) Martensitic (D) None of these

Last Answer : (A) Austenitic

Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic

Description : Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic

Last Answer : (C) Austenitic

Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic (D) None of these

Description : Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic (D) None of these

Last Answer : (C) Austenitic

Presence of SO2 in furnace gases attacks the ferrous metal by way of (A) Accelerating the rate of scaling (B) Causing metal embrittlement (C) Attacking the grain boundaries; particularly severe on low carbon and nickel bearing steels at high temperature (D) All (A), (B) and (C)

Description : Presence of SO2 in furnace gases attacks the ferrous metal by way of (A) Accelerating the rate of scaling (B) Causing metal embrittlement (C) Attacking the grain boundaries; particularly severe on low carbon and nickel bearing steels at high temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Description : Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Last Answer : d) Austenitic stainless steels

What is temper embrittlement in alloy steels and what are its effects ?

Description : What is temper embrittlement in alloy steels and what are its effects ?

Last Answer : Embrittlement attack is usually intergranular in metals, i.e. cracks progress between the grains of the polycrystalline material. It imparts a tendency to fail under a static load after a given period of time in those alloy steels which are susceptible to embrittlement.

Presence of high concentration of ozone and smog in atmospheric air causes the(A) Embrittlement & decrease of folding resistance of paper(B) Cracking of rubber products(C) Fading of dye on textiles(D) Damage of electrical insulator on high tension power line

Description : Presence of high concentration of ozone and smog in atmospheric air causes the (A) Embrittlement & decrease of folding resistance of paper (B) Cracking of rubber products (C) Fading of dye on textiles (D) Damage of electrical insulator on high tension power line

Last Answer : (B) Cracking of rubber products

The asbestos cement sewers are A. Light in weight B. Not structurally strong to bear large compressive stress C. Susceptible to corrosion by sulphuric acid D. All the above

Description : The asbestos cement sewers are A. Light in weight B. Not structurally strong to bear large compressive stress C. Susceptible to corrosion by sulphuric acid D. All the above

Last Answer : ANS: D

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Damage to metal surface by mechanical action is called (A) Pitting (B) Corrosion (C) Erosion (D) None of these

Description : Damage to metal surface by mechanical action is called (A) Pitting (B) Corrosion (C) Erosion (D) None of these

Last Answer : Option C

What steps can be taken to avoid stress corrosion cracking (SCC) in steel vessels used for storing anhydrous ammonia?

Description : What steps can be taken to avoid stress corrosion cracking (SCC) in steel vessels used for storing anhydrous ammonia?

Last Answer : The U.S. National Board of Pressure Vessel Inspectors recommends the following in one of their classic articles: 1. Pressure vessels should be fully stress relieved or fabricated with heads that ... at least 0.2 percent water to inhibit SCC. Source: National Board of Pressure Vessel Inspectors

_____ is a surface fatigue failure which occurs when the load on the bearing part exceeds the surface endurance strength of the material. (a) Scoring (b) Pitting (c) Corrosion

Description : _____ is a surface fatigue failure which occurs when the load on the bearing part exceeds the surface endurance strength of the material. (a) Scoring (b) Pitting (c) Corrosion

Last Answer : (b) Pitting

The phenomenon during which the boiler material becomes brittle due to accumulation of caustic substances is known as ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Description : The phenomenon during which the boiler material becomes brittle due to accumulation of caustic substances is known as ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Last Answer : d) Caustic embrittlement

The propulsion of water into steam drum by extremely rapid, almost explosive boiling of water at the heating surface is called ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Description : The propulsion of water into steam drum by extremely rapid, almost explosive boiling of water at the heating surface is called ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Last Answer : b) Priming

Which of the following is not a result of the excess of impurity in boiler-feed. a) Scale and sludge formation b) Decomposition c) Corrosion, priming and foaming d) Caustic embrittlement

Description : Which of the following is not a result of the excess of impurity in boiler-feed. a) Scale and sludge formation b) Decomposition c) Corrosion, priming and foaming d) Caustic embrittlement

Last Answer : b) Decomposition

Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE are engineering stress and engineering strain respectively (C) Phosphorous can be easily recovered in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Last Answer : Option C

Close inspection of a failed metal part reveals artifacts on the fracture surface commonly referred to as "striations" or "beach marks". This indicates the component failed as a result of: w) Sudden overloading x) Cyclical loading y) Stress corrosion cracking z) None of the above

Description : Close inspection of a failed metal part reveals artifacts on the fracture surface commonly referred to as "striations" or "beach marks". This indicates the component failed as a result of: w) Sudden overloading x) Cyclical loading y) Stress corrosion cracking z) None of the above

Last Answer : ANSWER: X -- CYCLICAL LOADING

Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic (bcc) crystal lattice structure is stronger & less ductile than those having face centred cubic (fcc) crystal lattice structure (C) Tungsten has a body centred cubic (bcc) crystal lattice structure (D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Description : Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic ... D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Last Answer : (C) Tungsten has a body centred cubic (bcc) crystal lattice structure

Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil(B) Sintering of porous catalyst(C) Hydrogen embrittlement(D) All (A), (B) and (C)

Description : Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil (B) Sintering of porous catalyst (C) Hydrogen embrittlement (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Description : Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Last Answer : (B) Toughness

__________ is used for determining the tensile strength of steels. (A) Hydraulic press (B) Universal testing machine (C) Mechanical press (D) None of these

Description : __________ is used for determining the tensile strength of steels. (A) Hydraulic press (B) Universal testing machine (C) Mechanical press (D) None of these

Last Answer : (B) Universal testing machine

The bearing material that is most susceptible to corrosion is : Q. Babbit R. Copper-lead S. Aluminium T. Aluminium-babbit

Description : The bearing material that is most susceptible to corrosion is : Q. Babbit R. Copper-lead S. Aluminium T. Aluminium-babbit

Last Answer : Q. Babbit

Alloys having more than 80% copper are generally more (A) Abrasion resistant (B) Corrosion resistant (C) Prone to season cracking (D) Machinable

Description : Alloys having more than 80% copper are generally more (A) Abrasion resistant (B) Corrosion resistant (C) Prone to season cracking (D) Machinable

Last Answer : (B) Corrosion resistant

Stress concentration is caused due to A. Variation in properties of material from point to point in a member B. Pitting at points or areas at which loads on a member are applied C. Abrupt change of section D. All of the above

Description : Stress concentration is caused due to A. Variation in properties of material from point to point in a member B. Pitting at points or areas at which loads on a member are applied C. Abrupt change of section D. All of the above

Last Answer : D. All of the above

Austempering process results in the formation of __________ structure. (A) Martensitic (B) Bainitic (C) Carburised (D) Stressed

Description : Austempering process results in the formation of __________ structure. (A) Martensitic (B) Bainitic (C) Carburised (D) Stressed

Last Answer : Option B

. Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation

Description : . Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation

Last Answer : (C) Give elasticity & prevent cracking of the film

.The main advantage of amalgam with high content of Cu is: A. Better marginal sealing B. Less corrosion C. Better tensile strength D. Higher and immediate compressive strength

Description : .The main advantage of amalgam with high content of Cu is: A. Better marginal sealing B. Less corrosion C. Better tensile strength D. Higher and immediate compressive strength

Last Answer : B. Less corrosion

A localised area of colour or textural change in the skin A. Macule B. Ecchymosis C. Freckle Ans: A 114. Alopecia is the absence of hair? A. True B. False

Description : A localised area of colour or textural change in the skin A. Macule B. Ecchymosis C. Freckle Ans: A 114. Alopecia is the absence of hair? A. True B. False

Last Answer : Ans: A

Highly porous refractory bricks are (A) Less susceptible to chemical attack by molten fluxes and gases etc (B) Very strong (C) Having very high thermal conductivity (D) None of these

Description : Highly porous refractory bricks are (A) Less susceptible to chemical attack by molten fluxes and gases etc (B) Very strong (C) Having very high thermal conductivity (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water(B) Cooling and freezing of water kills the bacteria present in it(C) With increasing boiler operating pressure of steam, the maximumallowable concentration of silica in feed water goes on decreasing(D) Dissolved oxygen content in high pressure boiler feed water should benil

Description : Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water (B) Cooling and freezing of water kills the ... goes on decreasing (D) Dissolved oxygen content in high pressure boiler feed water should be nil

Last Answer : (B) Cooling and freezing of water kills the bacteria present in it

Hydrogen in liquid steels is dissolved (A) As tiny gas bubbles (B) In the atomic form (C) In the ionic form (D) In the molecular form

Description : Hydrogen in liquid steels is dissolved (A) As tiny gas bubbles (B) In the atomic form (C) In the ionic form (D) In the molecular form

Last Answer : Option A

Hydrogen in liquid steels is dissolved (A) As tiny gas bubbles (B) In the atomic form (C) In the ionic form (D) In the molecular form

Description : Hydrogen in liquid steels is dissolved (A) As tiny gas bubbles (B) In the atomic form (C) In the ionic form (D) In the molecular form

Last Answer : Option A

Non-ferrous metals and hard steels do not exhibit a definite yield point, when pulled in the testing machine and hence for these cases, a better measure of their elastic properties is defined by the __________ stress. (A) Ultimate (B) Yield point (C) Proof (D) None of these

Description : Non-ferrous metals and hard steels do not exhibit a definite yield point, when pulled in the testing machine and hence for these cases, a better measure of their elastic properties is defined by the __________ stress. (A) Ultimate (B) Yield point (C) Proof (D) None of these

Last Answer : (C) Proof

Pick up the correct statement from the following: (A) The moment of inertia is calculated about the axis about which bending takes place (B) If tensile stress is less than axial stress, the section experiences compressive stress (C) If tensile stress is equal to axial stress, the section experiences compressive stress (D) All the above

Description : Pick up the correct statement from the following:  (A) The moment of inertia is calculated about the axis about which bending takes place  (B) If tensile stress is less than axial ... tensile stress is equal to axial stress, the section experiences compressive stress  (D) All the above 

Last Answer : (D) All the above 

Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) Having poor fatigue resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Description : Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) ... resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Last Answer : (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives

Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon gases carburise the surface of steel at annealing temperatures (C) Active nitrogen (formed by cracking ammonia at the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Description : Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon ... the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Last Answer : (D) None of these

Which of the following defects are unlikely to be detected by normal radiographic technique? a) Intergranular corrosion cracking b) Porosity c) Slag d) Lack of penetration

Description : Which of the following defects are unlikely to be detected by normal radiographic technique? a) Intergranular corrosion cracking b) Porosity c) Slag d) Lack of penetration

Last Answer : a) Intergranular corrosion cracking

Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Description : Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Last Answer : (C) Machinability

Presence of cobalt in steel improves its (A) Cutting ability (B) Corrosion resistance (C) Tensile strength

Description : Presence of cobalt in steel improves its (A) Cutting ability (B) Corrosion resistance (C) Tensile strength

Last Answer : (A) Cutting ability

Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Description : Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Last Answer : Option C

Which of the following is false? (a) Mica is usually found in metamorphic and igneous rocks (b) Aluminium has the advantage over iron as it is resistant to corrosion (c) line is mostly used in galvanising iron and steel goods (d) Manganese is largely used in making fertilizers

Description : Which of the following is false? (a) Mica is usually found in metamorphic and igneous rocks (b) Aluminium has the advantage over iron as it is resistant to corrosion (c) line is mostly used in galvanising iron and steel goods (d) Manganese is largely used in making fertilizers

Last Answer : Ans: (d)

All materials obey Hooke's law within elastic limit. When elastic limit is reached, the tensile strain (A) Increases very quickly (B) Decreases very quickly (C) Increases in proportion to stress (D) Decreases in proportion to stress

Description : All materials obey Hooke's law within elastic limit. When elastic limit is reached, the tensile strain (A) Increases very quickly (B) Decreases very quickly (C) Increases in proportion to stress (D) Decreases in proportion to stress

Last Answer : (A) Increases very quickly

Joints in concrete structures, are provided (A) To reduce the tensile stresses likely to be developed due to evaporation of water (B) To minimise the change in the dimensions of the slab (C) To minimise the necessary cracking (D) All the above

Description : Joints in concrete structures, are provided (A) To reduce the tensile stresses likely to be developed due to evaporation of water (B) To minimise the change in the dimensions of the slab (C) To minimise the necessary cracking (D) All the above

Last Answer : (D) All the above

High copper amalgam lasts longer than low copper amalgam because of:** A. Increased compressive strength B. Increased corrosion resistance C. High creep D. Increased tensile strength E. Decreased setting expansion

Description : High copper amalgam lasts longer than low copper amalgam because of:**  A. Increased compressive strength  B. Increased corrosion resistance  C. High creep  D. Increased tensile strength  E. Decreased setting expansion 

Last Answer : A. Increased compressive strength 

Molybdenum steels containing 0.15 to 0.40% molybdenum (A) Are prone to temper brittleness (B) Are used for automobile parts like gears, axle, shaft, bearings etc. (C) Have very poor fatigue resistance

Description : Molybdenum steels containing 0.15 to 0.40% molybdenum (A) Are prone to temper brittleness (B) Are used for automobile parts like gears, axle, shaft, bearings etc. (C) Have very poor fatigue resistance

Last Answer : (B) Are used for automobile parts like gears, axle, shaft, bearings etc

Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Description : Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Last Answer : (D) Vanadium

Coarse grained steels have (A) Low toughness (B) No tendency to distort (C) High density (D) Very high toughness

Description : Coarse grained steels have (A) Low toughness (B) No tendency to distort (C) High density (D) Very high toughness

Last Answer : (B) No tendency to distort

In cold riveting like hot riveting shank is subjected to majorly tensile stress. a) True b) False

Description : In cold riveting like hot riveting shank is subjected to majorly tensile stress. a) True b) False

Last Answer : b) False