Ferric stainless steels compared to austenitic stainless steels (A) Have lower corrosion resistance (B) Are harder to fabricate (C) Are less ductile and hence less suitable for cold pressing (D) All (A), (B) and (C)

Ferric stainless steels compared to austenitic stainless steels
(A) Have lower corrosion resistance
(B) Are harder to fabricate
(C) Are less ductile and hence less suitable for cold pressing
(D) All (A), (B) and (C)
by

1 Answer

Answer :

(D) All (A), (B) and (C)
by

Related questions

Identify the false statement (A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels (B) Pitting corrosion is usually very localised (C) Hydrogen embrittlement is facilitated by tensile stress (D) Stress corrosion cracking is facilitated by tensile stress

Description : Identify the false statement (A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels (B) Pitting corrosion is usually very localised (C) Hydrogen embrittlement is facilitated by tensile stress (D) Stress corrosion cracking is facilitated by tensile stress

Last Answer : (A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels

Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic (bcc) crystal lattice structure is stronger & less ductile than those having face centred cubic (fcc) crystal lattice structure (C) Tungsten has a body centred cubic (bcc) crystal lattice structure (D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Description : Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic ... D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Last Answer : (C) Tungsten has a body centred cubic (bcc) crystal lattice structure

Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic

Description : Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic

Last Answer : (C) Austenitic

Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic (D) None of these

Description : Which of the following stainless steels is non-magnetic? (A) Ferritic (B) Martenistic (C) Austenitic (D) None of these

Last Answer : (C) Austenitic

Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Description : Weld decay occurs in which of the following steel types? a) Carbon/Manganese b) Low alloy c) Any stainless steel d) Austenitic stainless steels

Last Answer : d) Austenitic stainless steels

Wrought iron is (A) High carbon iron (B) Highly resistance to acid corrosion (C) Malleable & ductile; and hence is used for chain links, hooks & couplings (D) An alloy of iron, chromium & carbon

Description : Wrought iron is (A) High carbon iron (B) Highly resistance to acid corrosion (C) Malleable & ductile; and hence is used for chain links, hooks & couplings (D) An alloy of iron, chromium & carbon

Last Answer : (C) Malleable & ductile; and hence is used for chain links, hooks & couplings

In a furnace employing forced draught as compared to induced draught, (A) Air is sucked in, so air leaks are more and hence the furnace efficiency is reduced (B) The fan operates hot and hence blades are liable to corrosion and erosion (C) Positive pressure exists in the furnace (D) None of these

Description : In a furnace employing forced draught as compared to induced draught, (A) Air is sucked in, so air leaks are more and hence the furnace efficiency is reduced (B) The fan operates hot and hence blades are liable to corrosion and erosion (C) Positive pressure exists in the furnace (D) None of these

Last Answer : (C) Positive pressure exists in the furnace

Which of the following crystal structures characterises the austenitic stainless steel? (A) Simple hexagonal (B) Body centred cubic (C) Face centred cubic (D) None of these

Description : Which of the following crystal structures characterises the austenitic stainless steel? (A) Simple hexagonal (B) Body centred cubic (C) Face centred cubic (D) None of these

Last Answer : (C) Face centred cubic

A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Description : A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Last Answer : (C) Invar

18/8 steel is a/an __________ stainless steel. (A) Austenitic (B) Ferritic (C) Martensitic (D) None of these

Description : 18/8 steel is a/an __________ stainless steel. (A) Austenitic (B) Ferritic (C) Martensitic (D) None of these

Last Answer : (A) Austenitic

Liquid nitrogen containers can be made from (A) Ferritic stainless steel (B) HSLA steel (C) Titanium (D) Austenitic stainless steel

Description : Liquid nitrogen containers can be made from (A) Ferritic stainless steel (B) HSLA steel (C) Titanium (D) Austenitic stainless steel

Last Answer : Option B

Tin base and lead base alloys are used for bearing materials. Tin compared to lead has lower (A) Price (B) Corrosion resistance (C) Thermal conductivity (D) Abundant availability

Description : Tin base and lead base alloys are used for bearing materials. Tin compared to lead has lower (A) Price (B) Corrosion resistance (C) Thermal conductivity (D) Abundant availability

Last Answer : (D) Abundant availability

Non-ferrous metals and hard steels do not exhibit a definite yield point, when pulled in the testing machine and hence for these cases, a better measure of their elastic properties is defined by the __________ stress. (A) Ultimate (B) Yield point (C) Proof (D) None of these

Description : Non-ferrous metals and hard steels do not exhibit a definite yield point, when pulled in the testing machine and hence for these cases, a better measure of their elastic properties is defined by the __________ stress. (A) Ultimate (B) Yield point (C) Proof (D) None of these

Last Answer : (C) Proof

Generally __________ are subjected to galvanising (i.e., zinc coating). (A) Non-ferrous metals (B) Non-metals (C) Low carbon steels (D) Stainless steel

Description : Generally __________ are subjected to galvanising (i.e., zinc coating). (A) Non-ferrous metals (B) Non-metals (C) Low carbon steels (D) Stainless steel

Last Answer : (C) Low carbon steels

Pick out the wrong statement (A) Hardening makes the steel more brittle (B) High alloy steels contain more than 50% alloying element (C) 18/8 stainless steel is a magnetic steel (D) Both (B) and (C)

Description : Pick out the wrong statement (A) Hardening makes the steel more brittle (B) High alloy steels contain more than 50% alloying element (C) 18/8 stainless steel is a magnetic steel (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Fill in the blanks with the suitable words____filaments are thinner as compared to the _____ filaments, hence are commonly called ______ and filaments

Description : Fill in the blanks with the suitable words____filaments are thinner as compared to the _____ filaments, hence are commonly called ______ and filaments

Last Answer : Fill in the blanks with the suitable words____filaments are thinner as compared to the ... are commonly called ______ and filaments respectively.

Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Description : Manganese is added in low carbon steel to A. Make the steel tougher and harder B. Raise the yield point C. Make the steel ductile and of good bending qualities D. All of the above

Last Answer : C. Make the steel ductile and of good bending qualities

Zinc is highly __________ at room temperature. (A) Ductile (B) Resistant to atmospheric corrosion (C) Malleable (D) Brittle

Description : Zinc is highly __________ at room temperature. (A) Ductile (B) Resistant to atmospheric corrosion (C) Malleable (D) Brittle

Last Answer : (B) Resistant to atmospheric corrosion

Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Description : Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Last Answer : Option C

Can you use ferric acid on stainless steel?

Description : Can you use ferric acid on stainless steel?

Last Answer : Yes, it is possible; the correct name is iron(III) chloride.

A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Description : A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Last Answer : (A) More corrosion resistant

Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Description : Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Last Answer : (A) Higher melting points

Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability to be cast, rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Last Answer : (A) High strength to weight ratio

Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Description : Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Last Answer : (C) Nickel-chrome steel

Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Description : Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Last Answer : (A) Silicon steel

Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl(D) Both (B) and (C)

Description : Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Are glass kitchen canister sets harder to clean than stainless steel kitchen canister sets?

Description : Are glass kitchen canister sets harder to clean than stainless steel kitchen canister sets?

Last Answer : There shouldn't be anything more difficult about cleaning glass canisters. In fact, it's likely to be easier, as glass is difficult to scratch, and glass is nonreactive, so most cleaners will ... remember to clean it with dishwashing liquid or another cleaner that is safe for items that hold food.

__________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Description : __________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Last Answer : (B) Niobium

Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility

Description : Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility

Last Answer : (A) A low carbon steel (0.05 to 0.3% carbon)

Most common stainless steel type 316, which is highly resistant to corrosion contains (A) 16-13% Cr 10-14% Ni and 2-3% Mo (B) 20-22% Cr, and 8-10% Ni (C) 2-4% Cr, 22% NI and 2-4% Mo (D) None of these

Description : Most common stainless steel type 316, which is highly resistant to corrosion contains (A) 16-13% Cr 10-14% Ni and 2-3% Mo (B) 20-22% Cr, and 8-10% Ni (C) 2-4% Cr, 22% NI and 2-4% Mo (D) None of these

Last Answer : (A) 16-13% Cr 10-14% Ni and 2-3% Mo

Though tin occurs lower than iron in the electrochemical series, yet it is coated on steel for corrosion protection, because of its (A) Lower cost (B) Abundant availability (C) Resistance to vegetable acids as the tin plate are commercially used in 'canning' industry (D) None of these

Description : Though tin occurs lower than iron in the electrochemical series, yet it is coated on steel for corrosion protection, because of its (A) Lower cost (B) Abundant availability (C) Resistance to vegetable acids as the tin plate are commercially used in 'canning' industry (D) None of these

Last Answer : (C) Resistance to vegetable acids as the tin plate are commercially used in 'canning' industry

Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) Having poor fatigue resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Description : Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) ... resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Last Answer : (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives

Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Description : Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Last Answer : (B) Toughness

Molybdenum steels containing 0.15 to 0.40% molybdenum (A) Are prone to temper brittleness (B) Are used for automobile parts like gears, axle, shaft, bearings etc. (C) Have very poor fatigue resistance

Description : Molybdenum steels containing 0.15 to 0.40% molybdenum (A) Are prone to temper brittleness (B) Are used for automobile parts like gears, axle, shaft, bearings etc. (C) Have very poor fatigue resistance

Last Answer : (B) Are used for automobile parts like gears, axle, shaft, bearings etc

What excuse would you fabricate to explain an inexplicable attack?

Description : What excuse would you fabricate to explain an inexplicable attack?

Last Answer : I am going to let him die.

How would you fabricate a wooden ball?

Description : How would you fabricate a wooden ball?

Last Answer : answer:Having no experience in this regard whatsoever, my first thought is that I'd try to turn it on a lathe. You'd have to stop at the contact points, obviously, and finish those by hand, ... the lathe, and your finish work would be limited to sanding and covering up those points of lathe contact.

What are the two methods used by fiber manufacturers to fabricate multimode and single mode glass fibers?

Description : What are the two methods used by fiber manufacturers to fabricate multimode and single mode glass fibers?

Last Answer : Vapor phase oxidation and direct-melt process.

After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask patient to bite firmly while impression is setting B. Hold the metal base frame against the abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Description : After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask ... abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Last Answer : B. Hold the metal base frame against the abutment tooth while setting

Low density polythene as compared to high density polythene is (A) Harder (B) Tougher (C) Chemically inert (D) More flexible

Description : Low density polythene as compared to high density polythene is (A) Harder (B) Tougher (C) Chemically inert (D) More flexible

Last Answer : (D) More flexible

Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Description : Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Last Answer : (D) None of these

Polypropylene compared to polythene is (A) Harder (B) Stronger (C) Lighter (D) All (A), (B) and (C)

Description : Polypropylene compared to polythene is (A) Harder (B) Stronger (C) Lighter (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Stainless steel resists corrosion due to (A) Carbon (B) Sulphur (C) Vanadium (D) Chromium

Description : Stainless steel resists corrosion due to (A) Carbon (B) Sulphur (C) Vanadium (D) Chromium

Last Answer : Answer: Option D

Weld decay will cause which of the following problems? a) A reduced resistance to corrosion b) a lower tensile strength c) The toughness is reduced d) The hardness will increase

Description : Weld decay will cause which of the following problems? a) A reduced resistance to corrosion b) a lower tensile strength c) The toughness is reduced d) The hardness will increase

Last Answer : a) A reduced resistance to corrosion

Refractory bricks burnt at very high temperature have got (A) Greater resistance to corrosion by slags (B) Less resistance to corrosion by slags (C) High spalling tendency (D) None of these

Description : Refractory bricks burnt at very high temperature have got (A) Greater resistance to corrosion by slags (B) Less resistance to corrosion by slags (C) High spalling tendency (D) None of these

Last Answer : (A) Greater resistance to corrosion by slags

Austenitic manganese steel used for making jaws of crushing machines contains about __________ percent manganese. (A) 1.5-2 (B) 3.5-4.5 (C) 7-9 (D) 12-14

Description : Austenitic manganese steel used for making jaws of crushing machines contains about __________ percent manganese. (A) 1.5-2 (B) 3.5-4.5 (C) 7-9 (D) 12-14

Last Answer : (D) 12-14

Manganese steels (A) Are non-magnetic (B) Possess high electrical resistance (C) Possess low coefficient of expansion (D) All the above

Description : Manganese steels (A) Are non-magnetic (B) Possess high electrical resistance (C) Possess low coefficient of expansion (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Description : Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

For a cold dilute feed to produce thick viscous liquor, backward feeding as compared to forward feeding results in (A) Increased economy (B) Decreased economy (C) Lower capacity (D) No effect on economy

Description : For a cold dilute feed to produce thick viscous liquor, backward feeding as compared to forward feeding results in (A) Increased economy (B) Decreased economy (C) Lower capacity (D) No effect on economy

Last Answer : (A) Increased economy

Pick out the wrong statement(A) Cold rubber (SBR) is superior as compared to hot rubber (SBR)(B) Polymerisation temperature can modify the properties of SBR(C) Production of cold SBR employs lower pressure as compared to that ofhot SBR(D) None of these

Description : Pick out the wrong statement (A) Cold rubber (SBR) is superior as compared to hot rubber (SBR) (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Nuclear fuel generally used in reactors is uranium oxide instead of uranium, because the former has higher (A) Melting point, hence can be subjected to higher temperature (B) Density; hence core volume for a given power output would be smaller (C) Resistance to effects of irradiation (D) All (A), (B) and (C)

Description : Nuclear fuel generally used in reactors is uranium oxide instead of uranium, because the former has higher (A) Melting point, hence can be subjected to higher temperature (B) Density; hence core volume for a given ... be smaller (C) Resistance to effects of irradiation (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)