When a gas is subjected to adiabatic expansion, it gets cooled due to (A) Decrease in velocity (B) Decrease in temperature (C) Decrease in kinetic energy (D) Energy spent in doing work

When a gas is subjected to adiabatic expansion, it gets cooled due to (A) Decrease in velocity
(B) Decrease in temperature
(C) Decrease in kinetic energy
(D) Energy spent in doing work
by

1 Answer

Answer :

(D) Energy spent in doing work
by

Related questions

Pick out the correct statement. (A) A real gas on expansion in vacuum gets heated up (B) An ideal gas on expansion in vacuum gets cooled (C) An ideal gas on expansion in vacuum gets heated up (D) A real gas on expansion in vacuum cools down whereas ideal gas remains unaffected

Description : Pick out the correct statement. (A) A real gas on expansion in vacuum gets heated up (B) An ideal gas on expansion in vacuum gets cooled (C) An ideal gas on expansion in vacuum gets heated up (D) A real gas on expansion in vacuum cools down whereas ideal gas remains unaffected

Last Answer : (D) A real gas on expansion in vacuum cools down whereas ideal gas remains unaffecte

If the internal energy of an ideal gas decreases by the same amount as the work done by the system, then the (A) Process must be isobaric (B) Temperature must decrease (C) Process must be adiabatic (D) Both (B) and (C)

Description : If the internal energy of an ideal gas decreases by the same amount as the work done by the system, then the (A) Process must be isobaric (B) Temperature must decrease (C) Process must be adiabatic (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

The adiabatic throttling process of a perfect gas is one of constant enthalpy (A) In which there is a temperature drop (B) Which is exemplified by a non-steady flow expansion (C) Which can be performed in a pipe with a constriction (D) In which there is an increase in temperature

Description : The adiabatic throttling process of a perfect gas is one of constant enthalpy (A) In which there is a temperature drop (B) Which is exemplified by a non-steady flow expansion (C) Which can be performed in a pipe with a constriction (D) In which there is an increase in temperature

Last Answer : (C) Which can be performed in a pipe with a constriction

Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Description : Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Last Answer : (B) An isometric process is a constant pressure process

The expression, nCv(T2- T1), is for the __________ of an ideal gas. (A) Work done under adiabatic condition (B) Co-efficient of thermal expansion (C) Compressibility (D) None of these

Description : The expression, nCv(T2- T1), is for the __________ of an ideal gas. (A) Work done under adiabatic condition (B) Co-efficient of thermal expansion (C) Compressibility (D) None of these

Last Answer : (A) Work done under adiabatic condition

The expression, nRT ln(P1/P2), is for the __________of an ideal gas. (A) Compressibility (B) Work done under adiabatic condition (C) Work done under isothermal condition (D) Co-efficient of thermal expansion

Description : The expression, nRT ln(P1/P2), is for the __________of an ideal gas. (A) Compressibility (B) Work done under adiabatic condition (C) Work done under isothermal condition (D) Co-efficient of thermal expansion

Last Answer : C) Work done under isothermal condition

The increase in the rate of reaction with temperature is due to (A) Increase in the number of effective collisions (B) Decrease in activation energy (C) Increase in the average kinetic energy of the reacting molecules (D) None of these

Description : The increase in the rate of reaction with temperature is due to (A) Increase in the number of effective collisions (B) Decrease in activation energy (C) Increase in the average kinetic energy of the reacting molecules (D) None of these

Last Answer : (B) Decrease in activation energy

During adiabatic expansion of gas (A) Pressure remains constant (B) Pressure is increased (C) Temperature remains constant (D) None of these

Description : During adiabatic expansion of gas (A) Pressure remains constant (B) Pressure is increased (C) Temperature remains constant (D) None of these

Last Answer : (D) None of these

For the case of a fuel gas undergoing combustion with air, if the air/fuel ratio is increased, the adiabatic flame temperature will (A) Increase (B) Decrease (C) Increase or decrease depending on the fuel type (D) Not change

Description : For the case of a fuel gas undergoing combustion with air, if the air/fuel ratio is increased, the adiabatic flame temperature will (A) Increase (B) Decrease (C) Increase or decrease depending on the fuel type (D) Not change

Last Answer : (B) Decrease

Gases are cooled in Joule-Thomson expansion, when it is __________ inversion temperature. (A) Below (B) At (C) Above (D) Either 'b' or 'c'

Description : Gases are cooled in Joule-Thomson expansion, when it is __________ inversion temperature. (A) Below (B) At (C) Above (D) Either 'b' or 'c'

Last Answer : A) Below

Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Description : Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (D) Adiabatic expansion against a piston or in a turbine

Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Description : Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Last Answer : (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion)

The thermodynamic law, PVy = constant, is not applicable in case of (A) Ideal compression of air (B) Free expansion of an ideal gas (C) Adiabatic expansion of steam in a turbine (D) Adiabatic compression of a perfect gas

Description : The thermodynamic law, PVy = constant, is not applicable in case of (A) Ideal compression of air (B) Free expansion of an ideal gas (C) Adiabatic expansion of steam in a turbine (D) Adiabatic compression of a perfect gas

Last Answer : (B) Free expansion of an ideal gas

The thermodynamic law, PVy = constant, is not followed by the (A) Free expansion of an ideal gas (B) Adiabatic expansion of steam in turbine (C) Adiabatic compression of air (D) Ideal compression of air

Description : The thermodynamic law, PVy = constant, is not followed by the (A) Free expansion of an ideal gas (B) Adiabatic expansion of steam in turbine (C) Adiabatic compression of air (D) Ideal compression of air

Last Answer : Option A

What happens in a reversible adiabatic expansion process? (A) Heating takes place (B) Cooling takes place (C) Pressure is constant (D) Temperature is constant

Description : What happens in a reversible adiabatic expansion process? (A) Heating takes place (B) Cooling takes place (C) Pressure is constant (D) Temperature is constant

Last Answer : (B) Cooling takes place

In case of an __________ process, the temperature of the system increases. (A) Isothermal compression (B) Isothermal expansion (C) Adiabatic expansion (D) Adiabatic compression

Description : In case of an __________ process, the temperature of the system increases. (A) Isothermal compression (B) Isothermal expansion (C) Adiabatic expansion (D) Adiabatic compression

Last Answer : (D) Adiabatic compression

Volute of a centrifugal pump should be designed in a fashion, such that the (A) Kinetic head gets converted into static head (B) Moving stream gradually reduces velocity (C) Mean velocity remains constant (D) None of these

Description : Volute of a centrifugal pump should be designed in a fashion, such that the (A) Kinetic head gets converted into static head (B) Moving stream gradually reduces velocity (C) Mean velocity remains constant (D) None of these

Last Answer : (A) Kinetic head gets converted into static head

Glass is (A) Mainly CaO (B) Subjected to galvanising (C) A super cooled liquid (D) All (A), (B) and (C)

Description : Glass is (A) Mainly CaO (B) Subjected to galvanising (C) A super cooled liquid (D) All (A), (B) and (C)

Last Answer : (C) A super cooled liquid

The average kinetic energy of the molecules of an ideal gas is directly proportional to – (1) Velocity of Molecules (2) Mass of Molecules (3) Absolute temperature of the gas (4) Temperature of environment

Description : The average kinetic energy of the molecules of an ideal gas is directly proportional to – (1) Velocity of Molecules (2) Mass of Molecules (3) Absolute temperature of the gas (4) Temperature of environment

Last Answer : (3) Absolute temperature of the gas Explanation: The average kinetic energy of gas molecules is directly proportional to absolute temperature only. This implies that all molecular motion ceases if the temperature is reduced to absolute zero.

According to the kinetic theory, the Kelvin temperature of an ideal gas is proportional to which one of the following. Is the temperature proportional to the gas's average molecular: w) velocity x) momentum y) kinetic energy z) potential energy

Description : According to the kinetic theory, the Kelvin temperature of an ideal gas is proportional to which one of the following. Is the temperature proportional to the gas's average molecular: w) velocity x) momentum y) kinetic energy z) potential energy

Last Answer : ANSWER: Y -- KINETIC ENERGY

The average kinetic energy of the molecules of an ideal gas is directly proportional to (1) Velocity of Molecules (2) Mass of Molecules (3) Absolute temperature of the gas (4) Temperature of environment

Description : The average kinetic energy of the molecules of an ideal gas is directly proportional to (1) Velocity of Molecules (2) Mass of Molecules (3) Absolute temperature of the gas (4) Temperature of environment

Last Answer : Absolute temperature of the gas

Which of the following is the correct option for the free expansion of an ideal gas under adiabatic condition?

Description : Which of the following is the correct option for the free expansion of an ideal gas under adiabatic condition?

Last Answer : Which of the following is the correct option for the free expansion of an ideal gas under adiabatic condition? A. `q= ... q = 0, Delta T lt 0, w ne 0`

When the expansion of compression of gas takes place without transfer of heat to or from the gas the process is called  a. reversible  b. adiabatic  c. polytropic  d. isothermal

Description : When the expansion of compression of gas takes place without transfer of heat to or from the gas the process is called  a. reversible  b. adiabatic  c. polytropic  d. isothermal

Last Answer : adiabatic

When the expansion of compression of gas takes place without transfer of heat or from the gas the process is called;  a. Isometric process  b. Isothermal process  c. Isobaric process  d. Adiabatic process

Description : When the expansion of compression of gas takes place without transfer of heat or from the gas the process is called;  a. Isometric process  b. Isothermal process  c. Isobaric process  d. Adiabatic process

Last Answer : Adiabatic process

An ideal gas of volume 1liter and pressure 10 bar undergoes a quasistatic adiabatic expansion until the pressure drops to 1 bar. Assume γ to be 1.4 what is the final volume?  a. 3.18 l  b. 4.18 l  c. 5.18 l  d. 6.18 l

Description : An ideal gas of volume 1liter and pressure 10 bar undergoes a quasistatic adiabatic expansion until the pressure drops to 1 bar. Assume γ to be 1.4 what is the final volume?  a. 3.18 l  b. 4.18 l  c. 5.18 l  d. 6.18 l

Last Answer : 5.18 l

If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Description : If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Last Answer : Answer : e

Unsaturated air (with dry bulb temperature and dew point being 35°C and 18°C respectively) is passed through a water spray chamber maintained at 15°C. The air will be cooled (A) And humidified (B) And dehumidified with increase in wet bulb temperature (C) At the same relative humidity (D) And dehumidified with decrease in wet bulb temperature

Description : Unsaturated air (with dry bulb temperature and dew point being 35°C and 18°C respectively) is passed through a water spray chamber maintained at 15°C. The air will be cooled (A) And ... (C) At the same relative humidity (D) And dehumidified with decrease in wet bulb temperature

Last Answer : (D) And dehumidified with decrease in wet bulb temperature

A process, in which the temperature of the working substance remains constant during its expansion or compression, is called  A. isothermal process  B. hyperbolic process  C. adiabatic process  D. polytropic process

Description : A process, in which the temperature of the working substance remains constant during its expansion or compression, is called  A. isothermal process  B. hyperbolic process  C. adiabatic process  D. polytropic process

Last Answer : Answer: A

Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature (C) Heat release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Description : Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature ... release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Description : 6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (C) Merely compressing it beyond critical pressure

The principle applied in liquefaction of gases is (A) Adiabatic expansion (B) Joule-Thomson effect (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The principle applied in liquefaction of gases is (A) Adiabatic expansion (B) Joule-Thomson effect (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Fire tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Description : Fire tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Last Answer : a) Flue gases pass through tubes and water around it

Water tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Description : Water tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Last Answer : b) Water passes through the tubes and flue gases around it

Which of the following statements(s) is/are true concerning human energy requirement? a. In normal subjects, less than 5% of basal energy requirement is spent on cardiac output and the work of breathing b. Mechanical ventilation can decrease the energy expenditure for normal respiration c. For a 70 kg male, average resting energy consumption is almost 1500 kcal/day d. Similar increases in energy expenditures are associated with elective surgery and trauma or thermal injury

Description : Which of the following statements(s) is/are true concerning human energy requirement? a. In normal subjects, less than 5% of basal energy requirement is spent on cardiac output and the ... d. Similar increases in energy expenditures are associated with elective surgery and trauma or thermal injury

Last Answer : Answer: a, c Basal energy requirements are measured with the subject at rest when no external work is being done; the energy is used mainly for transport and synthetic work within cells. A ... average-sized adult who sustains a major burn rarely may require more than 3500 kcal/day for maintenance

A two stage compressor is used to compress an ideal gas. The gas is cooled to the initial temperature after each stage. The intermediate pressure for the minimum total work requirement should be equal to the __________ mean of P1 and P2.(where, P1 and P2 are initial and final pressures respectively) (A) Logarithmic (B) Arithmetic (C) Geometric (D) Harmonic

Description : A two stage compressor is used to compress an ideal gas. The gas is cooled to the initial temperature after each stage. The intermediate pressure for the minimum total work requirement should be equal to ... final pressures respectively) (A) Logarithmic (B) Arithmetic (C) Geometric (D) Harmonic

Last Answer : (C) Geometric

The chemical potential of a component (μi) of a phase is the amount by which its capacity for doing all work, barring work of expansion is increased per unit amount of substance added for an infinitesimal addition at constant temperature and pressure. It is given by (A) (∂E/∂ni)S, v, nj (B) (∂G/∂ni)T, P, nj = (∂A/∂ni) T, v, nj (C) (∂H/∂ni)S, P, nj (D) All (A), (B) and (C)

Description : The chemical potential of a component (μi) of a phase is the amount by which its capacity for doing all work, barring work of expansion is increased per unit amount of substance added for an infinitesimal addition at constant temperature and ... , nj (C) (∂H/∂ni)S, P, nj (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Temperature of a gas is produced due to  (a) its heating value  (b) kinetic energy of molecules  (c) repulsion of molecules  (d) attraction of molecules  (e) surface tension of molecules.

Description : Temperature of a gas is produced due to  (a) its heating value  (b) kinetic energy of molecules  (c) repulsion of molecules  (d) attraction of molecules  (e) surface tension of molecules.

Last Answer : Answer : b

In a vapour compression cycle, the refrigerant immediately after expansion valve is (a) liquid (b) sub-cooled liquid (c) saturated liquid (d) wet vapour

Description : In a vapour compression cycle, the refrigerant immediately after expansion valve is (a) liquid (b) sub-cooled liquid (c) saturated liquid (d) wet vapour

Last Answer : Ans: d

The molecules of a gas moving through space with some velocity possesses what kind of energy?  A. Translational energy  B. Spin energy  C. Rotational kinetic energy  D. Sensible energy

Description : The molecules of a gas moving through space with some velocity possesses what kind of energy?  A. Translational energy  B. Spin energy  C. Rotational kinetic energy  D. Sensible energy

Last Answer : Translational energy

The temperature of a body is an indicator of – (1) The total energy of the molecules of the body (2) The average energy of the molecules of the body (3) The total velocity of the molecules of the body (4) The average kinetic energy of the molecules of the body

Description : The temperature of a body is an indicator of – (1) The total energy of the molecules of the body (2) The average energy of the molecules of the body (3) The total velocity of the molecules of the body (4) The average kinetic energy of the molecules of the body

Last Answer : (4) The average kinetic energy of the molecules of the body

If two different gases have the same volume, temperature, and pressure and behave like ideal gases, they will also be identical in which one of the following ways? w) average molecular velocity x) total mass y) total molecular kinetic energy z) average momentum per molecule

Description : If two different gases have the same volume, temperature, and pressure and behave like ideal gases, they will also be identical in which one of the following ways? w) average molecular velocity x) total mass y) total molecular kinetic energy z) average momentum per molecule

Last Answer : ANSWER: Y -- TOTAL MOLECULAR KINETIC ENERGY

The work done in an adiabatic change in a particular gas depends upon changes in the __________ only. (A) Temperature (B) Specific heat (C) Volume (D) Pressure

Description : The work done in an adiabatic change in a particular gas depends upon changes in the __________ only. (A) Temperature (B) Specific heat (C) Volume (D) Pressure

Last Answer : (A) Temperature

Adiabatic expansion resulting in cooling is called

Description : Adiabatic expansion resulting in cooling is called

Last Answer : Adiabatic expansion resulting in cooling is called A. coriolis effect B. joule-kelvin effect C. le chatelier principle D. principle of parsimony

Consider the following processes: [IES-1999] 1. Constant pressure heat addition. 2. Adiabatic compression. 3. Adiabatic expansion. 4. Constant pressure heat rejection. The correct sequence of these processes in Rankine cycle is: (a) 1, 2, 3, 4 (b) 2, 1, 4, 3 (c) 2, 1, 3, 4 (d) 1, 2, 4, 3

Description : Consider the following processes: [IES-1999] 1. Constant pressure heat addition. 2. Adiabatic compression. 3. Adiabatic expansion. 4. Constant pressure heat rejection. The correct sequence of these processes in Rankine cycle is: (a) 1, 2, 3, 4 (b) 2, 1, 4, 3 (c) 2, 1, 3, 4 (d) 1, 2, 4, 3

Last Answer : (c) 2, 1, 3, 4 

Which of the following engines is the most efficient?  a. Isobaric expansion  b. Adiabatic compression  c. Adiabatic expansion  d. Isothermal expansion

Description : Which of the following engines is the most efficient?  a. Isobaric expansion  b. Adiabatic compression  c. Adiabatic expansion  d. Isothermal expansion

Last Answer : Isobaric expansion

Which of the following processes are thermodynamically reversible  (a) throttling  (b) free expansion  (c) constant volume and constant pressure  (d) hyperbolic and pV = C  (e) isothermal and adiabatic.

Description : Which of the following processes are thermodynamically reversible  (a) throttling  (b) free expansion  (c) constant volume and constant pressure  (d) hyperbolic and pV = C  (e) isothermal and adiabatic.

Last Answer : Answer : e

If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Description : If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Last Answer : Answer : a

The value of n = 1 in the polytropic process indicates it to be  (a) reversible process  (b) isothermal process  (c) adiabatic process  (d) irreversible process  (e) free expansion process.

Description : The value of n = 1 in the polytropic process indicates it to be  (a) reversible process  (b) isothermal process  (c) adiabatic process  (d) irreversible process  (e) free expansion process.

Last Answer : Answer : b