Addition polymerisation takes place either by a free radical mechanism or ionic mechanism depending on the reagents used. Free radical polymerisation is catalyzed by __________, which decompose to give free radicals. (A) Organic peroxides (B) Sulphuric acid (C) Hydrofluoric acid (D) None of these

Addition polymerisation takes place either by a free radical mechanism
or ionic mechanism depending on the reagents used. Free radical
polymerisation is catalyzed by __________, which decompose to give free
radicals.
(A) Organic peroxides
(B) Sulphuric acid
(C) Hydrofluoric acid
(D) None of these
by

1 Answer

Answer :

(A) Organic peroxides
by

Related questions

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Description : Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Last Answer : (A) Sulphuric acid

Which one of the following acids is used in battery? (1) Hydrochloric acid (2) Hydrofluoric acid (3) Sulphuric acid (4) Sulphurous acid

Description : Which one of the following acids is used in battery? (1) Hydrochloric acid (2) Hydrofluoric acid (3) Sulphuric acid (4) Sulphurous acid

Last Answer : (3) Sulphuric acid Explanation: Battery is a device consisting of one or more electrochemical cells that convert stored chemical energy into electrical energy. Possessing different chemical properties ... domestic acidic drain cleaner, electrolyte in lead-acid batteries and various cleaning agents.

Which one of the following acids is used in battery ? (1) Hydrochloric acid (2) Hydrofluoric acid (3) Sulphuric acid (4) Sulphurous acid

Description : Which one of the following acids is used in battery ? (1) Hydrochloric acid (2) Hydrofluoric acid (3) Sulphuric acid (4) Sulphurous acid

Last Answer : Sulphuric acid

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

(A) Carbenes act as free radicals. (R) Only triplet carbenes act as biradical (divalent free radical).

Description : (A) Carbenes act as free radicals. (R) Only triplet carbenes act as biradical (divalent free radical).

Last Answer : (A) Carbenes act as free radicals. (R) Only triplet carbenes act as biradical (divalent free radical). A. ... IF (A) is incorrect but (R) is correct.

Which of the following statement(s) is/are true concerning ischemia reperfusion injury? a. During ischemia, ATP degradation results in increased plasma and intracellular levels of hypoxanthine and xanthene b. Oxygen free radicals such as the superoxide radical are involved in the expression of the proinflammatory phenotype of endothelial cells, macrophages and neutrophils c. The intracellular adhesion molecule-1 (ICAN-1) contributes to injury and disruption of the endothelial lining, with extensive capillary leak and resultant interstitial edema d. Animal models have demonstrated that passive immunization with antibodies to neutrophil adhesive complex lessen the ischemic/reperfusion microvascular injury

Description : Which of the following statement(s) is/are true concerning ischemia reperfusion injury? a. During ischemia, ATP degradation results in increased plasma and intracellular levels of ... immunization with antibodies to neutrophil adhesive complex lessen the ischemic/reperfusion microvascular injury

Last Answer : Answer: a, b, c, d During the ischemia and hypoperfusion phase, degradation of ATP stores essential to maintain cell integrity and significant loss of diffusible ... either the neutrophil adhesive complex or the endothelial selectins dramatically lessens ischemia/reperfusion microvascular injury

Chlorine free radicals react with methane by : (a) donating their free-radical electron to methane to form chloromethane. (b) abstracting a hydrogen atom from methane, and producing HCl and a methyl radical. (c) forming a carbanion intermediate that rapidly dissociates to produce chloromethane. (d) forming a carbonium ion intermediate that rapidly dissociates to form chloromethane

Description : Chlorine free radicals react with methane by : (a) donating their free-radical electron to methane to form chloromethane. (b) abstracting a hydrogen atom from methane, and producing ... produce chloromethane. (d) forming a carbonium ion intermediate that rapidly dissociates to form chloromethane

Last Answer : abstracting a hydrogen atom from methane, and producing HCl and a methyl radical

Is hydrofluoric acid ionic or covalent bonding?

Description : Is hydrofluoric acid ionic or covalent bonding?

Last Answer : What is the answer ?

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Last Answer : (B) Teflon

The mechanism of dehydration of an alcohol to give an ether involves formation of (a) Carbonium ions(b) Carbanions(c) Free radicals(d) Carbenes:

Description : The mechanism of dehydration of an alcohol to give an ether involves formation of : (a) Carbonium ions (b) Carbanions (c) Free radicals (d) Carbenes

Last Answer : Carbonium ions

The mechanism of dehydration of an alcohol to give an alkene involves formation of : (a) Carbonium ions (b) Carbanions (c) Free radicals (d) Carbenes

Description : The mechanism of dehydration of an alcohol to give an alkene involves formation of : (a) Carbonium ions (b) Carbanions (c) Free radicals (d) Carbenes

Last Answer : Carbonium ions

The acid-catalyzed dehydration mechanism for alcohols is best described as a(n) : (a) E1 . (b) E2 . (c) SN1 (d) SN2

Description : The acid-catalyzed dehydration mechanism for alcohols is best described as a(n) : (a) E1 . (b) E2 . (c) SN1 (d) SN2

Last Answer : E1 .

Laboratory glass wares which reacts with hydrofluoric acid, are made of the __________ glass. (A) Lead (B) Borosilicate (C) Soda lime (D) Alkali silicate

Description : Laboratory glass wares which reacts with hydrofluoric acid, are made of the __________ glass. (A) Lead (B) Borosilicate (C) Soda lime (D) Alkali silicate

Last Answer : (B) Borosilicate

Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Description : Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Last Answer : (A) Addition

Leaching of phosphate rock by strong __________ acid produces phosphoric acid. (A) Sulphuric (B) Hydrochloric (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Leaching of phosphate rock by strong __________ acid produces phosphoric acid. (A) Sulphuric (B) Hydrochloric (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

In the TCA cycle, at which of the following enzyme-catalyzed steps, incorporation of elements of water into an intermediate of the cycle takes place : (A) Citrate synthase (B) Aconitase (C) Maleate dehydrogenase (D) Succinyl Co-A synthase

Description : In the TCA cycle, at which of the following enzyme-catalyzed steps, incorporation of elements of water into an intermediate of the cycle takes place : (A) Citrate synthase (B) Aconitase (C) Maleate dehydrogenase (D) Succinyl Co-A synthase

Last Answer : (C) Maleate dehydrogenase

The chlorination of methane to give CCl4 is an example of (a) an electrophilic addition (b) a free-radical substitution (c) a nucleophilic addition (d) an electrophilic substitution

Description : The chlorination of methane to give CCl4 is an example of (a) an electrophilic addition (b) a free-radical substitution (c) a nucleophilic addition (d) an electrophilic substitution

Last Answer : a free-radical substitution

Fermentation is a process of decomposition of an organic compound by (1) catalysts (2) enzymes (3) carbanions (4) free radicals

Description : Fermentation is a process of decomposition of an organic compound by (1) catalysts (2) enzymes (3) carbanions (4) free radicals

Last Answer : (2) enzymes Explanation: Fermentation in food processing typically is the conversion of carbohydrates to alcohols and carbon dioxide or organic acids using yeasts, bacteria, or a combination there ... to lactic acid. Alcoholic fermentation follows the same enzymatic pathway for the first 10 steps.

Fermentation is a process of decomposition of an organic compound by : (1) catalysts (2) enzymes (3) carbanions (4) free radicals

Description : Fermentation is a process of decomposition of an organic compound by : (1) catalysts (2) enzymes (3) carbanions (4) free radicals

Last Answer : enzymes

The reaction between methane and chlorine in diffused sunlight is-----? A. Oxidation B. Reduction C. Polymerisation D. Radical substitution (Answer)

Description : The reaction between methane and chlorine in diffused sunlight is-----? A. Oxidation B. Reduction C. Polymerisation D. Radical substitution (Answer)

Last Answer : D. Radical substitution (Answer)

Point out the wrong statement. a) XML checks the ID request against its policies and either allows or denies the request b) SPML in most instances operates as a reply/request mechanism c) User centric authentication takes place usually in the form of knowledge cards d) All of the mentioned

Description : Point out the wrong statement. a) XML checks the ID request against its policies and either allows or denies the request b) SPML in most instances operates as a reply/request mechanism c) User centric authentication takes place usually in the form of knowledge cards d) All of the mentioned

Last Answer : SPML in most instances operates as a reply/request mechanism

In which amongs the following product is formed by free radical mechanism ?

Description : In which amongs the following product is formed by free radical mechanism ?

Last Answer : In which amongs the following product is formed by free radical mechanism ? A. (I) (ii) (P) B. (IV) (ii) (Q) C. (II) (iii) (Q) D. (III) (iii) (P)

Which one of the following reactions proceeds through free radical chain mechanism?

Description : Which one of the following reactions proceeds through free radical chain mechanism?

Last Answer : Which one of the following reactions proceeds through free radical chain mechanism? A. Hydrolysis of tert- ... D. Addition of `NaHSO_(3)` on acetone

Why should we always use purest monomer in free radical mechanism ?

Description : Why should we always use purest monomer in free radical mechanism ? 

Last Answer : Ans. Monomer has to be as pure as possible because the presence of any other molecule during free radical polymerisation can act chain initiator or inhibitor which will interfere with the normal polymerisation reaction.

lass Ionomer Cement sets because of,** A. Acid-Base reaction B. Addition polymerisation reaction C. Growth of glass crystals D. Slip plane locking E. Solvent evaporation

Description : lass Ionomer Cement sets because of,** A. Acid-Base reaction B. Addition polymerisation reaction C. Growth of glass crystals D. Slip plane locking E. Solvent evaporation

Last Answer : A. Acid-Base reaction

Which of the reactions between the following pairs of reagents proceeds by a mechanism that may be described as an electrophilic substitution? (a) Benzene + Br2/FeBr3 (b) Propene + Br2 (c) Acetone + NH2NH2 (d) Ethyl bromide + aq KOH

Description : Which of the reactions between the following pairs of reagents proceeds by a mechanism that may be described as an electrophilic substitution? (a) Benzene + Br2/FeBr3 (b) Propene + Br2 (c) Acetone + NH2NH2 (d) Ethyl bromide + aq KOH

Last Answer : Benzene + Br2/FeBr3

Which of the following factors influence whether a reaction will proceed by an SN1, SN2, E1, or E2 mechanism? (a) Structure of the alkyl halide (b) Solvent (c) Concentration of reagents (d) Nature of the nucleophile (e) All of these

Description : Which of the following factors influence whether a reaction will proceed by an SN1, SN2, E1, or E2 mechanism? (a) Structure of the alkyl halide (b) Solvent (c) Concentration of reagents (d) Nature of the nucleophile (e) All of these

Last Answer : All of these

How do you define free radical addition reaction ?

Description : How do you define free radical addition reaction ?

Last Answer : Give an example. When unsaturated compounds undergo addition reactions with free radicals, it is called free radical addition reaction. Ex; CH3-CH = CH2+HBr-----------> CH3-CH2-CH2Br

Which of the following characterizes the reactions of aldehydes and ketones? (a) electrophilic addition (b) electrophilic substitution (c) nucleophilic acyl substitution (d) nucleophilic addition; free radical addition

Description : Which of the following characterizes the reactions of aldehydes and ketones? (a) electrophilic addition (b) electrophilic substitution (c) nucleophilic acyl substitution (d) nucleophilic addition; free radical addition

Last Answer : nucleophilic addition; free radical addition

In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Description : In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Last Answer : (A) Cross linked polystyrene

Pick out the correct statement. (A) Chemical oxygen demand (COD) is a measure of chemically oxidisable organic matter present in water (B) COD is determined by oxidising the organic matter present in water with potassium dichromate in cone, sulphuric acid solution at boiling temperature for specified time (C) COD is related to BOD of a given waste in water but the relationship varies for different wastes. Typically COD of potable water may be 1-2 mg/litre (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) Chemical oxygen demand (COD) is a measure of chemically oxidisable organic matter present in water (B) COD is determined by oxidising the organic matter present in water with potassium dichromate ... of potable water may be 1-2 mg/litre (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ketones react with Grignard reagents to form an addition product which on hydrolysis gives a (a) Primary alcohol (b) Tertiary alcohol (c) Secondary alcohol (d) Ketal

Description : Ketones react with Grignard reagents to form an addition product which on hydrolysis gives a (a) Primary alcohol (b) Tertiary alcohol (c) Secondary alcohol (d) Ketal

Last Answer : Tertiary alcohol

In case of parallel flow heat exchanger, the lowest temperature theoretically attainable by the hot fluid is __________ the outlet temperature of the cold fluid. (A) Equal to (B) More than (C) Less than (D) Either more or less than (depending upon the fluid)

Description : In case of parallel flow heat exchanger, the lowest temperature theoretically attainable by the hot fluid is __________ the outlet temperature of the cold fluid. (A) Equal to (B) More than (C) Less than (D) Either more or less than (depending upon the fluid)

Last Answer : (A) Equal to

Which of the following would not be a suitable material of construction for handling aqueous hydrofluoric acid (HF) at 100°C? (A) Monel (B) Stainless steel (C) Graphite (D) Kel-F and Teflon

Description : Which of the following would not be a suitable material of construction for handling aqueous hydrofluoric acid (HF) at 100°C? (A) Monel (B) Stainless steel (C) Graphite (D) Kel-F and Teflon

Last Answer : (B) Stainless steel

Glass lined vessels are not used for handling (A) Dilute H2SO4 (B) Dilute HNO3 (C) Dilute HCI (D) Hydrofluoric acid

Description : Glass lined vessels are not used for handling (A) Dilute H2SO4 (B) Dilute HNO3 (C) Dilute HCI (D) Hydrofluoric acid

Last Answer : (D) Hydrofluoric acid

Glass lined vessels are not used for handling/storing (A) Dilute H2SO4 (B) Dilute HNO3 (C) Dilute HCl (D) Hydrofluoric acid

Description : Glass lined vessels are not used for handling/storing (A) Dilute H2SO4 (B) Dilute HNO3 (C) Dilute HCl (D) Hydrofluoric acid

Last Answer : (D) Hydrofluoric acid

I'm a third grade student trying to do a project on how long it takes oranges to decompose

Description : I'm a third grade student trying to do a project on how long it takes oranges to decompose

Last Answer : You have to go on line and look this up.

How long does it takes for a yogurt to decompose?

Description : How long does it takes for a yogurt to decompose?

Last Answer : Need answer

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Last Answer : (B) Employs condensation polymerisation

Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation

Description : Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation

Last Answer : C) Teflon is formed by step growth polymerisation

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

In condensation polymerisation as compared to addition polymerisation (A) The monomers are unsaturated compounds (B) No co-product is lost (C) The monomers contain two functional groups (D) Generally only one monomer is involved

Description : In condensation polymerisation as compared to addition polymerisation (A) The monomers are unsaturated compounds (B) No co-product is lost (C) The monomers contain two functional groups (D) Generally only one monomer is involved

Last Answer : (C) The monomers contain two functional groups

Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Description : Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Last Answer : (A) Polymeric fibres are never produced by addition polymerisation

Polymerisation process in which two or more monomers of chemically different nature take part is called (A) Copolymerisation (B) Addition polymerisation (C) Chain polymerisation (D) None of these

Description : Polymerisation process in which two or more monomers of chemically different nature take part is called (A) Copolymerisation (B) Addition polymerisation (C) Chain polymerisation (D) None of these

Last Answer : (A) Copolymerisation

Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Description : Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Last Answer : (B) Have three dimensional structure

Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these

Description : Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these

Last Answer : (A) Addition polymerisation product

Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Last Answer : (D) Polyhexamethylene adipamide

Which of the following is produced by addition polymerisation? (A) Polybutadiene (B) Phenol formaldehyde (C) Urea-formaldehyde (D) Dacron

Description : Which of the following is produced by addition polymerisation? (A) Polybutadiene (B) Phenol formaldehyde (C) Urea-formaldehyde (D) Dacron

Last Answer : (A) Polybutadiene