If the shearing stress is zero on two planes, then the angle between the two planes is (A) 45° (B) 90° (C) 135° (D) 225°

If the shearing stress is zero on two planes, then the angle between the two planes is
(A) 45°
(B) 90°
(C) 135°
(D) 225°
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The angle between the directions of the failure and the major principal plane, is equal to (A) 90° + effective angle of shearing resistance (B) 90° + half of the angle of shearing resistance (C) 45° - half of the angle of shearing resistance (D) 45° + half of the angle of shearing resistance

Description : The angle between the directions of the failure and the major principal plane, is equal to (A) 90° + effective angle of shearing resistance (B) 90° + half of the angle of shearing resistance (C) 45° - half of the angle of shearing resistance (D) 45° + half of the angle of shearing resistance

Last Answer : Answer: Option D

Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Description : Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Last Answer : (C) Is limited to a maximum value of 45°

A member is balanced at its end by two inclined members carrying equal forces. For equilibrium the angle between the inclined bars must be (A) 3° (B) 45° (C) 90° (D) 120°

Description : A member is balanced at its end by two inclined members carrying equal forces. For equilibrium  the angle between the inclined bars must be  (A) 3°  (B) 45°  (C) 90°  (D) 120° 

Last Answer : (D) 120° 

The angle of intersection of a contour and a ridge line, is (A) 30° (B) 45° (C) 60° (D) 90°

Description : The angle of intersection of a contour and a ridge line, is  (A) 30°  (B) 45°  (C) 60°  (D) 90° 

Last Answer : (D) 90° 

A lemniscate curve will not be transitional throughout, if its deflection angle, is (A) 45° (B) 60° (C) 90° (D) 120°

Description : A lemniscate curve will not be transitional throughout, if its deflection angle, is (A) 45° (B) 60° (C) 90° (D) 120°

Last Answer : (A) 45°

Maximum number of vehicles can be parked with (A) Parallel parking (B) 30° angle parking (C) 45° angle parking (D) 90° angle parking

Description : Maximum number of vehicles can be parked with (A) Parallel parking (B) 30° angle parking (C) 45° angle parking (D) 90° angle parking

Last Answer : Answer: Option D

When the width of car parking space and width of street are limited, generally preferred parking system is (A) Parallel parking (B) 45° angle parking (C) 65° angle parking (D) 90° angle parking

Description : When the width of car parking space and width of street are limited, generally preferred parking system is (A) Parallel parking (B) 45° angle parking (C) 65° angle parking (D) 90° angle parking

Last Answer : Answer: Option A

A ship strikes the berth generally at an angle (A) 90° with the face of the dock (B) 45° with the face of the dock (C) 30° with the face of the dock (D) 10° with the face of the dock

Description : A ship strikes the berth generally at an angle (A) 90° with the face of the dock (B) 45° with the face of the dock (C) 30° with the face of the dock (D) 10° with the face of the dock

Last Answer : (D) 10° with the face of the dock

Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Description : Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Last Answer : Answer: Option D

PQRS is a square. A is a point on PS ,B is a point on PQ,C is a point on QR. ABC is a triangle inside square PQRS. Angle abc = 90° . If AP=BQ=CR then prove that angle BAC =45° -Maths 9th

Description : PQRS is a square. A is a point on PS ,B is a point on PQ,C is a point on QR. ABC is a triangle inside square PQRS. Angle abc = 90° . If AP=BQ=CR then prove that angle BAC =45° -Maths 9th

Last Answer : This is the sketch of the question but its hard to answer.

PQRS is a square. A is a point on PS ,B is a point on PQ,C is a point on QR. ABC is a triangle inside square PQRS. Angle abc = 90° . If AP=BQ=CR then prove that angle BAC =45° -Maths 9th

Description : PQRS is a square. A is a point on PS ,B is a point on PQ,C is a point on QR. ABC is a triangle inside square PQRS. Angle abc = 90° . If AP=BQ=CR then prove that angle BAC =45° -Maths 9th

Last Answer : This is the sketch of the question but its hard to answer.

Projectile will attain its maximum range, if it is fired at an angle of A. 30° B. 47° C. 90° D. 45°

Description : Projectile will attain its maximum range, if it is fired at an angle of A. 30° B. 47° C. 90° D. 45°

Last Answer : 45°

The helix angle for double helical gears may be made up to (A) 45° (B) 60° (C) 75° (D) 90°

Description : The helix angle for double helical gears may be made up to (A) 45° (B) 60° (C) 75° (D) 90°

Last Answer : (A) 45°

At what value of crank angle (roughly), no flow of water from or into the air vessel takes place in case of a double acting reciprocating pump? (A) 40° and 140° (B) 45° and 60° (C) 90° and 80° (D) 20° and 120°

Description : At what value of crank angle (roughly), no flow of water from or into the air vessel takes place in case of a double acting reciprocating pump? (A) 40° and 140° (B) 45° and 60° (C) 90° and 80° (D) 20° and 120°

Last Answer : (A) 40° and 140

If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Description : If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Last Answer : (B) 45°

The pressure acting on the stones in stone masonry construction should be (A) Along the direction of bedding planes (B) At 45° to the direction of bedding planes (C) At 60° to the direction of bedding planes (D) Perpendicular to the direction of bedding planes

Description : The pressure acting on the stones in stone masonry construction should be (A) Along the direction of bedding planes (B) At 45° to the direction of bedding planes (C) At 60° to the direction of bedding planes (D) Perpendicular to the direction of bedding planes

Last Answer : Answer: Option D

The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90

Description : The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90

Last Answer : (B) 45°

A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively (A) 0.5 N/mm² and 30° (B) 0.05 N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Last Answer : Answer: Option B

An angle of deflection right, may be directly obtained by setting the instrument to read (A) Zero on back station (B) 180° on back station (C) 90° (D) 270° on back station

Description : An angle of deflection right, may be directly obtained by setting the instrument to read (A) Zero on back station (B) 180° on back station (C) 90° (D) 270° on back station

Last Answer : (A) Zero on back station

In inverting amplifier, the phase difference between input and output voltages must be A. 30° B. 45° C. 90° D. 180°

Description : In inverting amplifier, the phase difference between input and output voltages must be A. 30° B. 45° C. 90° D. 180°

Last Answer : 180°

1 rad is equal to A. 57.3° B. 54° C. 45° D. 90°

Description : 1 rad is equal to A. 57.3° B. 54° C. 45° D. 90°

Last Answer : 57.3°

Phase difference between a node and an antinode is A. 90° B. 45° C. 180° D. 360°

Description : Phase difference between a node and an antinode is A. 90° B. 45° C. 180° D. 360°

Last Answer : 180°

Which of the following pipe bends will incur the largest head loss?(A) U-bend (B) 30° bend (C) 45° bend (D) 90° bend

Description : Which of the following pipe bends will incur the largest head loss? (A) U-bend (B) 30° bend (C) 45° bend (D) 90° bend

Last Answer : (A) U-bend

The sum of the three interior angles of a triangle, the vertices of which lie on the surface of the earth, covering a vast area of several hundreds of sq kms, is : (a) Less than 180° (b) Equal to 180° (c) More than 180° but not less than 270° (d) More than 180° but not more than 225°

Description : The sum of the three interior angles of a triangle, the vertices of which lie on the surface of the earth, covering a vast area of several hundreds of sq kms, is : (a) Less than 180° (b) Equal to 180° (c) More than 180° but not less than 270° (d) More than 180° but not more than 225°

Last Answer : (d) More than 180° but not more than 225°

If the output of a dragline for 90° angle of swing at optimum depth of cut is X, then the output for 120° angle of swing at 120 % of optimum depth of cut will be (A) Equal to X (B) More than X (C) Less than X (D) Any of the above

Description : If the output of a dragline for 90° angle of swing at optimum depth of cut is X, then the output for 120° angle of swing at 120 % of optimum depth of cut will be (A) Equal to X (B) More than X (C) Less than X (D) Any of the above

Last Answer : (C) Less than X

Angle of obliquity is defined as a. Angle between the plane on which stresses are evaluated and one of the given planes b. Angle between resultant stress and the plane of given normal stress c. Angle between resultant stress and shear stress d. Angle between resultant stress and normal stress

Description : Angle of obliquity is defined as a. Angle between the plane on which stresses are evaluated and one of the given planes b. Angle between resultant stress and the plane of given normal stress c. Angle between resultant stress and shear stress d. Angle between resultant stress and normal stress

Last Answer : d. Angle between resultant stress and normal stress

If a shaft is simultaneously subjected to a toque T and a bending moment M, the ratio of maximum bending stress and maximum shearing stress is (A) M/T (B) T/M (C) 2M/T (D) 2T/M

Description : If a shaft is simultaneously subjected to a toque T and a bending moment M, the ratio of maximum bending stress and maximum shearing stress is (A) M/T (B) T/M (C) 2M/T (D) 2T/M

Last Answer : (C) 2M/T

A rectangular beam 20 cm wide is subjected to a maximum shearing force of 10,000 kg, the corresponding maximum shearing stress being 30 kg/cm2 . The depth of the beam is (A) 15 cm (B) 20 cm (C) 25 cm (D) 30 cm

Description : A rectangular beam 20 cm wide is subjected to a maximum shearing force of 10,000 kg, the corresponding maximum shearing stress being 30 kg/cm2 . The depth of the beam is (A) 15 cm (B) 20 cm (C) 25 cm (D) 30 cm

Last Answer : (C) 25 cm

Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct shear test (C) The confining pressure is maximum during an unconfined compression test (D) The cylindrical specimen of a soil is subjected to major principal stress till it fails due to shearing along the plane of the failure

Description : Pick up the correct statement from the following: (A) An unconfined compression test is a special case of triaxial compression test (B) An unconfined compression test is a special case of direct ... subjected to major principal stress till it fails due to shearing along the plane of the failure

Last Answer : Option A

Consider the following statements: 1. For a saturated soil, Skempton’s B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing strength in case of dense sand. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. For a saturated soil, Skempton's B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

The longitudinal shearing stresses acting on the surface between the steel and concrete are called. (a) Bond stress (b) Tensile stresses (c) Compressive stresses (d) None of these

Description : The longitudinal shearing stresses acting on the surface between the steel and concrete are called. (a) Bond stress (b) Tensile stresses (c) Compressive stresses (d) None of these

Last Answer : (a) Bond stress

The rise of water table below the foundation influences the bearing capacity of soil mainly by reducing (A) Cohesion and effective angle of shearing resistance (B) Cohesion and effective unit weight of soil (C) Effective unit weight of soil and effective angle of shearing resistance (D) Effective angle of shearing resistance

Description : The rise of water table below the foundation influences the bearing capacity of soil mainly by reducing (A) Cohesion and effective angle of shearing resistance (B) Cohesion and effective ... weight of soil and effective angle of shearing resistance (D) Effective angle of shearing resistance

Last Answer : Answer: Option B

The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the soil is in a passive state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Description : The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the ... state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Last Answer : Answer: Option A

In a loaded beam, the point of contraflexure occurs at a section where (A) Bending moment is minimum (B) Bending moment is zero or changes sign (C) Bending moment is maximum (D) Shearing force is maximum

Description : In a loaded beam, the point of contraflexure occurs at a section where (A) Bending moment is minimum (B) Bending moment is zero or changes sign (C) Bending moment is maximum (D) Shearing force is maximum

Last Answer : Answer: Option B

The angle between two plane mirrors of optical square, is (A) 20° (B) 30° (C) 45° (D) 60°

Description : The angle between two plane mirrors of optical square, is  (A) 20°  (B) 30°  (C) 45°  (D) 60° 

Last Answer : (C) 45° 

For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD' and AD' when measured were 4 cm, 3 cm and 5 cm respectively. The angle between the reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90

Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined  and produced to intersect the load line at D and a line parallel to the load line through A at D'.  Distances AD, DD ... reactions at A and B is  (A) 30°  (B) 45°  (C) 60°  (D) 90

Last Answer : (D) 90

An angle of 45° with a chain line may be set out with (A) Optical square (B) Open cross staff (C) French cross staff (D) Prismatic square

Description : An angle of 45° with a chain line may be set out with  (A) Optical square  (B) Open cross staff  (C) French cross staff  (D) Prismatic square

Last Answer : (C) French cross staff

A well conditioned triangle has no angle less than (A) 20° (B) 30° (C) 45° (D) 60°

Description : A well conditioned triangle has no angle less than  (A) 20°  (B) 30°  (C) 45°  (D) 60°

Last Answer : (B) 30° 

The direction of steepest slope on a contour, is (A) Along the contour (B) At an angle of 45° to the contour (C) At right angles to the contour (D) None of these

Description : The direction of steepest slope on a contour, is (A) Along the contour (B) At an angle of 45° to the contour (C) At right angles to the contour (D) None of these

Last Answer : (C) At right angles to the contour

The bearings of the lines AB and BC are 146° 30' and 68° 30'. The included angle ABC is (A) 102° (B) 78° (C) 45° (D) None of these

Description : The bearings of the lines AB and BC are 146° 30' and 68° 30'. The included angle ABC is (A) 102° (B) 78° (C) 45° (D) None of these

Last Answer : (A) 102

A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Description : A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Last Answer : (C) 45°

The passive earth pressure of a soil is proportional to (where is the angle of internal friction of the soil.) (A) tan (45° - ) (B) tan (45° + ) (C) tan2 (45° - ) (D) tan2 (45° + )

Description : The passive earth pressure of a soil is proportional to (where is the angle of internal friction of the soil.) (A) tan (45° - ) (B) tan (45° + ) (C) tan2 (45° - ) (D) tan2 (45° + )

Last Answer : (D) tan2 (45° + )

The active earth pressure of a soil is proportional to (where is the angle of friction of the soil) (A) tan (45° - ) (B) tan2 (45° + /2) (C) tan2 (45° - /2) (D) tan (45° + )

Description : The active earth pressure of a soil is proportional to (where is the angle of friction of the soil) (A) tan (45° - ) (B) tan2 (45° + /2) (C) tan2 (45° - /2) (D) tan (45° + )

Last Answer : Answer: Option C

The earth pressure of a soil at rest, is proportional to (where is the angle of internal friction of the soil) (A) tan (45° - ) (B) tan (45° + ) (C) tan2 (45° - ) (D) None of these

Description : The earth pressure of a soil at rest, is proportional to (where is the angle of internal friction of the soil) (A) tan (45° - ) (B) tan (45° + ) (C) tan2 (45° - ) (D) None of these

Last Answer : Answer: Option D

The anchorage value of a hook is assumed sixteen times the diameter of the bar if the angle of the bend, is (A) 30° (B) 40° (C) 45° (D) All the above

Description : The anchorage value of a hook is assumed sixteen times the diameter of the bar if the angle of the bend, is (A) 30° (B) 40° (C) 45° (D) All the above

Last Answer : Answer: Option D

The yield line ultimate moment is obtained when the yield line is --------------- to the direction of the reinforcement [ A ] Parallel [ B ] At right angles. [ C ] Passes through [ D ] Crosses at an angle of 45°

Description : The yield line ultimate moment is obtained when the yield line is --------------- to the direction of the reinforcement [ A ] Parallel [ B ] At right angles. [ C ] Passes through [ D ] Crosses at an angle of 45°

Last Answer : [ B ] At right angles.

A traverse deflection angle is (A) Less than 90° (B) More than 90° but less than 180° (C) The difference between the included angle and 180° (D) The difference between 360° and the included angle

Description : A traverse deflection angle is  (A) Less than 90°  (B) More than 90° but less than 180°  (C) The difference between the included angle and 180°  (D) The difference between 360° and the included angle 

Last Answer : (C) The difference between the included angle and 180° 

If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Description : If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Last Answer : D

ABCD is a regular parallelogram plot of land whose angle BAD is 60°. If the bearing of the line AB is 30°, the bearing of CD, is (A) 90° (B) 120° (C) 210° (D) 270°

Description : ABCD is a regular parallelogram plot of land whose angle BAD is 60°. If the bearing of the line AB is 30°, the bearing of CD, is (A) 90° (B) 120° (C) 210° (D) 270°

Last Answer : (C) 210°

Critical angle of electromagnetic radiation takes place if (A) Angle of incidence is equal to angle of refraction (B) Angle of incidence is greater than the angle of refraction (C) Angle of incidence is equal to 90° (D) Angle of refraction is equal to 90°

Description : Critical angle of electromagnetic radiation takes place if (A) Angle of incidence is equal to angle of refraction (B) Angle of incidence is greater than the angle of refraction (C) Angle of incidence is equal to 90° (D) Angle of refraction is equal to 90°

Last Answer : Answer: Option D