Description : Poisson's ratio for concrete (A) Remains constant (B) Increases with richer mixes (C) Decreases with richer mixes (D) None of these
Last Answer : Answer: Option B
Description : For a given material Young's modulus is 200 GN/m2 and modulus of rigidity is 80 GN/m2 . The value of Poisson's ratio is (A) 0.15 (B) 0.20 (C) 0.25 (D) 0.30
Last Answer : (C) 0.25
Description : Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) ... less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product
Last Answer : Option B
Description : A steel bar 5 m × 50 mm is loaded with 250,000 N. If the modulus of elasticity of the material is 0.2 MN/mm2 and Poisson's ratio is 0.25, the change in the volume of the bar is: (A) 1.125 cm3 (B) 2.125 cm3 (C) 3.125 cm3 (D) 4.125 cm
Last Answer : (C) 3.125 cm
Description : The ratio of lateral strain to axial strain of a homogeneous material, is known (A) Yield ratio (B) Hooke's ratio (C) Poisson's ratio (D) Plastic ratio
Last Answer : (C) Poisson's ratio
Description : An open-ended cylinder of radius and thickness is subjected to internal pressure . The Young's modulus for the material is and Poisson's ratio is . The longitudinal strain is (A) Zero (B) pr/TE (C) pr/2TE (D) None of these
Last Answer : (A) Zero
Description : cylindrical rod subjected to a tensile strain within the elastic limit undergoes a volume change. If the volume strain is equal to half the tensile strain, then the Poisson's ratio of the rod is (A) 0 (B) 0.33 (C) 0.44 (D) 0.25
Last Answer : Option C
Description : Define Poisson’s ratio.
Last Answer : Define Poisson’s ratio.
Description : A metal having a Poisson's ratio = 0.3 is elastically deformed under uniaxial tension. If the longitudinal strain = 0.8, then the magnitude of thickness strain is (A) -0.8 (B) 0.8 (C) +0.08 (D) -0.24
Last Answer : (D) -0.24
Description : Which of the following relationships is correct for relating the three elastic constants of an isotropic elastic material (where, E = Young's modulus, G = Modulus of rigidity or shear modulus v = Poisson's ratio)? (A) E = 2G (1 + v) (B) E = G (1 + v) (C) E = G (1 + v)/2 (D) E = 2G (1 + 2v)
Last Answer : (A) E = 2G (1 + v)
Description : The ratio of lateral strain to linear strain is called (a) Modulus of Elasticity (b) Modulus of Rigidity (c) Bulk Modulus (d) Poisson’s Ratio
Last Answer : (d) Poisson’s Ratio
Description : The relationship between Young’s modulus (E), Bulk modulus (K) and Poisson’s ratio (μ) is given by a. E=2K(1-2μ) b. E=3K(1-2μ) c. E=2K(1-2μ) d. E=2K(1-3μ)
Last Answer : b. E=3K(1-2μ)
Description : Poisson’s ratio is a. Lateral strain / Longitudinal strain b. Shear strain / Lateral strain c. Longitudinal strain / Lateral strain d. Lateral strain / Volumetric strain
Last Answer : a. Lateral strain / Longitudinal strain
Description : Define volumetric strain. Also give the relation between lateral strain to and Poisson’s ratio.
Last Answer : Volumetric strain: Volumetric strain is defined as the ratio of change in volume to original volume.
Description : If Poisson's ratio of a resistance wire strain gauge is 1.8, then neglecting piezo-resistive effects, its Gauge factor is : (A) 2.8 (B) 2.6 (C) 4.6 (D) 3.6
Last Answer : If Poisson's ratio of a resistance wire strain gauge is 1.8, then neglecting piezo-resistive effects, its Gauge factor is : 4.6
Description : Drag co-efficient in hindered settling is __________ that in free settling. (A) Less than (B) Equal to (C) Not necessarily greater than (D) Always greater than
Last Answer : (D) Always greater than
Description : Uniformity coefficient of a soil is (A) Always less than 1 (B) Always equal to 1 (C) Equal to or less than 1 (D) Equal to or greater than 1
Last Answer : (D) Equal to or greater than 1
Description : Tortuosity of a meandering river is always (A) Equal to 1 (B) Less than 1 (C) Greater than 1 (D) Less than or equal to 1
Last Answer : Answer: Option C
Description : Moment of resistance for a under reinforced section --------- that of a critical section [ A ] Is equal to [ B ] Is always greater than [ C ] Is less than [ D ] May be sometimes greater than
Last Answer : [ C ] Is less than
Description : The depth of neutral axis for a balanced section is --------- the depth of critical neutral axis [ A ] equal [ B ] always greater than [ C ] always less than [ D ] may be sometimes greater than
Last Answer : [ A ] equal
Description : The law which states, "Within elastic limits strain produced is proportional to the stress producing it", is known as (A) Bernoulli's law (B) Stress law (C) Hooke's law (D) Poisson's law
Last Answer : (C) Hooke's law
Description : In PERT analysis, the time estimates of activities and probability of their occurrence follow (A) Normal distribution curve (B) Poisson's distribution curve (C) Beta distribution curve (D) None of the above
Last Answer : (C) Beta distribution curve
Description : In actual machines (A) Mechanical advantage is greater than velocity ratio (B) Mechanical advantage is equal to velocity ratio (C) Mechanical advantage is less than velocity ratio (D) Mechanical advantage is unity
Last Answer : (C) Mechanical advantage is less than velocity ratio
Description : In ideal machines (A) Mechanical advantage is greater than velocity ratio (B) Mechanical advantage is equal to velocity ratio (C) Mechanical advantage is less than velocity ratio (D) Mechanical advantage is unity
Last Answer : (B) Mechanical advantage is equal to velocity ratio
Description : the water content of a fully saturated soil mass is 100%, then the voids ratio of the sample is (A) Less than specific gravity of soil (B) Equal to specific gravity of soil (C) Greater than specific gravity of soil (D) Independent of specific gravity of soil
Description : The ratio of average values of shear stresses produced on the bed and the banks of a channel due to flowing water is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Equal to zero
Description : The ratio of the thickness of web to that of flange of steel rolled structural beams and channels is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Less than 1 in beams but greater than 1 in channels
Last Answer : Answer: Option A
Description : The value of sec A or cosec A is always —————- a. Less than or equal to one b. Greater than or equal to one c. Equal to one d. Negative
Last Answer : b. Greater than or equal to one
Description : Magnetic bearing of a survey line at any place (A) Remains constant (B) Changes systematically (C) Varies differently in different months of the year (D) Is always greater than true bearing
Last Answer : (C) Varies differently in different months of the year
Description : In moment distribution method, the sum of distribution factors of all the members meeting at any joint is always (A) Zero (B) Less than 1 (C) 1 (D) Greater than 1
Last Answer : (C) 1
Description : The average coefficient of permeability of natural deposits (A) Parallel to stratification is always greater than that perpendicular to stratification (B) Parallel to stratification is always less ... D) Parallel to stratification may or may not be greater than that perpendicular to stratification
Description : For a slab supported on its four edges with corners held down and loaded uniformly, the Marcus correction factor to the moments obtained by Grashoff Rankine's theory (A) Is always less than 1 (B) Is always greater than 1 (C) Can be more than 1 (D) Can be less than 1
Description : For a balanced section, the tensile stress in the reinforcement [ A ] reaches its allowable stress [ B ] is always less than its allowable stress [ C ] may be greater than its allowable stress [ D ] none of the above
Last Answer : [ A ] reaches its allowable stress
Description : Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction
Last Answer : a. greater than the dynamic driction
Description : Second ionization energy: A. is always less than first ionization energy B. is always greater than first ionization energy (Answer) C. is equal to the first ionization energy D. may be greater or less than the first ionization energy depending on the nature of the element
Last Answer : B. is always greater than first ionization energy (Answer)
Description : Cd is always __________ Cc (A) Greater than (B) Less than (C) Equal to (D) Either more or less than
Last Answer : (A) Greater than
Description : An exothermic reaction takes place in an adiabatic reactor. The product temperature __________ reactor feed temperature. (A) Is always equal to (B) Is always greater than (C) Is always less than (D) May be greater or less than
Last Answer : (B) Is always greater than
Description : Always perform A/B Testing if there is probability to beat the original variation by? A. 0.05 B. less than 5% C. greater than 5% D. greater than equal to 5%
Last Answer : C. greater than 5%
Description : Ratio of permissible stress in direct compression and bending compression is (A) Less than 1 (B) Between 1 and 1.5 (C) Between 1.5 and 2.0 (D) Greater than 2
Description : The slab is designed as one way if the ratio of long span to short span is (A) Less than 1 (B) Between 1 and 1.5 (C) Between 1.5 and 2 (D) Greater than 2
Last Answer : Answer: Option D
Description : According to IS:456-2000, the minimum slenderness ratio for a short column is [ A ] Less than 12 [ B ] Between 12 and 18 [ C ] Less than 18 [ D ] Must be greater than 18
Last Answer : [ A ] Less than 12
Description : For economical consideration, the ratio of overall depth to width should be [ A ] less than 1.5 [ B ] between 1.50 and 2.0 [ C ] between 2.0 to 2.5 [ D ] greater than 2.5
Last Answer : [ B ] between 1.50 and 2.0
Description : Pourquoi les poissons de mer ne sont ils pas sales naturellement?
Last Answer : Need answer
Description : In actual machines a.Mechanical advantage is unity b.Mechanical advantage is greater than velocity ratio c.Mechanical advantage is less than velocity ratio d.Mechanical advantage is less than unity e.Mechanical advantage is equal to velocity ratio
Last Answer : c. Mechanical advantage is less than velocity ratio
Description : While ascending a hill, the driver of the vehicle keeps the gear ratio – (1) equal to 1 (2) less than 1 (3) greater than 1 (4) either equal to or greater than 1
Last Answer : (4) either equal to or greater than 1 Explanation: While ascending a hill Gear Ratio should be "Either equal to or greater than 1?. Gear Ratio is the ratio between angular velocity of input gear to the angular velocity of output gear. It prevents the vehicle from stalling.
Description : The ratio of specific heat at constant pressure (Cp) and specific heat at constant volume (cv) is A. equal to one B. less than one C. greater than one D. none of these
Last Answer : Answer: C
Description : While ascending a hill, the driver of the vehicle keeps the gear ratio (1) equal to 1 (2) less than 1 (3) greater than 1 (4) either equal to or greater than 1
Last Answer : either equal to or greater than 1
Description : When compared with the co-latitude of the place of observation, the declination of a circumpolar star is always, (a) Lesser (b) Greater (c) Equal (d) Either lesser or equal
Last Answer : (b) Greater
Description : Compressibility of sandy soils is (A) Almost equal to that of clayey soils (B) Much greater than that of clayey soils (C) Much less than that of clayey soils (D) None of the above
Last Answer : (C) Much less than that of clayey soils