In PERT analysis, the time estimates of activities and probability of their occurrence follow
(A) Normal distribution curve
(B) Poisson's distribution curve
(C) Beta distribution curve
(D) None of the above

1 Answer

Answer :

(C) Beta distribution curve

Related questions

Description : The probability distribution taken to represent the completion of time in PERT analysis is (a) Normal Distribution (b) Bet Distribution (c) Gamma Distribution (d) Gaussain Distribution

Last Answer : (a) Normal Distribution

Description : PERT technique of network analysis is mainly useful for (A) Small projects (B) Large and complex projects (C) Research and development projects (D) Deterministic activities

Last Answer : (C) Research and development projects

Description : PERT chart can be used to track the tasks of a project when task time estimates are  fairly uncertain.

Last Answer : Ans: True

Description : The area under the Beta distribution curve is divided into two equal parts by (A) Most likely time (B) Optimistic time (C) Pessimistic time (D) Expected time

Last Answer : (D) Expected time

Description : The process of identifying the probability of occurrence of a natural hazard of a given intensity at a specific location based on an analysis of natural processes and site conditions is termed as- (a) Disaster calculation (b) Hazard Assessment (c) Hazard calculation (d) None of the above

Last Answer : (b) Hazard Assessment

Description : The probability of completing the project can be estimated based upon the ____ . (A) Uniform distribution curve (B) Normal distribution curve. (C) U-shaped distribution curve (D) None of the above

Last Answer : (B) Normal distribution curve.

Description : The probability of completing the project can be estimated based  upon the . (A)Uniform distribution curve (B)Normal distribution curve. (C)U-shaped distribution curve (D)None of the above

Last Answer : (B)Normal distribution curve.

Description : Consider the following features/factors: 1. Projects are of the non-repetitive type 2. Time required need not be known 3. Time required is known precisely 4. Events have been established for planning 5. Emphasis is given to ... and 4 (B) 3, 4 and 5 (C) 1, 3 and 4 (D) 1, 2 and 5

Last Answer : (A) 1, 2 and 4

Description : The three time estimates for the activities of the network shown in the given figure are shown above their arrows. The earliest expected time for the event 4, is (A) 19 (B) 14 (C) 24 (D) None of these

Last Answer : (A) 19

Description : What is the benefit of using PERT/CPM network as integral component of project management? a. They furnish a consistent framework for planning, scheduling, monitoring and controlling project b. They illustrate ... that the project will be completed by a specific date d. All of the above

Last Answer : d. All of the above

Description : Pick up the correct statement from the following: (A) The difference of latest occurrence time and earliest expected time, is called slack (B) The activities connecting the events having zero slack, lie on the critical path (C) The critical path consumes the maximum time (D) All the above

Last Answer : (D) All the above

Description : For a project manager to have an effective means of identifying and communicating the planned activities and their interrelationships, he must use a network technique. One of the network ... evaluation review technique c. Path evaluation review technique d. Project execution review technique

Last Answer : b. Program evaluation review technique

Description : PERT (Project Evaluation and Review Technique) analysis is based on  A. Optimistic time, Pessimistic time and Most likely time  B.Pessimistic time, Optional time, Maximum time  C.Optimistic time, Efficient time, Most likely time  D.Minimax time, Optimistic time and harmonic time

Last Answer : A. Optimistic time, Pessimistic time and Most likely time

Description : In a PERT network, slack time is _____. (a) The end point that represents the completion of a major activity (b) The time or resources required to progress from one event to another ( ... without delaying the whole Project (d) The longest or most time-consuming sequence of events and activities 

Last Answer : (c) The amount of time an individual activity can be delayed without delaying the whole Project 

Description : The basic difference between PERT and CPM is that a. PERT deals with events and CPM with activities b. Critical Path is determined in PERT only c. Costs are considered on CPM only d. Guessed times are used in PERT and evaluated times in CPM.

Last Answer : a. PERT deals with events and CPM with activities

Description : Following an experiment, Jamie estimates that his probability of making a three-pointer with a basketball is 0.8. If he shoots 160 attempts from the three-point line, how many times can he expect to make a three-point basket A. 32 B. 80 C. 128 D. 160?

Last Answer : 128

Description : Draw particle size distribution curve. Explain mechanical sieve analysis for grading of soil with a sketch.

Last Answer : Mechanical sieve analysis -The process of analyzing the particle size present in soil by using mechanical means, is known as mechanical sieve Analysis. By performing mechanical sieve analysis, a particle size ... c) Fine grained soil d) Coarse grained soil e) Uniformly graded soil

Description : )The total amount of risk that is calculated for a project is found by 1. Multiplying the sum of each the risk times the amount at stake 2. Calculating the cumulative sum of the probability for ... 3. Cannot be calculated since all risks are not know  4. The amount of project reserves available

Last Answer : 2. Calculating the cumulative sum of the probability for each risk and multiplying this value times the consequence of occurrence of the risk events

Description : The Three attributes of project risk are _________, ___________ and ___________. 1. What might happen, who it happens to, and how much will it cost  2. Notification, frequency of relevant events, ... planning, total number of risk events 5. Risk event, probability occurrence, the amount at stake

Last Answer : 5. Risk event, probability occurrence, the amount at stake

Description : What is the probability of a non -occurrence of an event that is certain to happen? a. 0 b. 1 c. -1 d. 2

Last Answer : a. 0

Description : An alphabet consist of the letters A, B, C and D. The probability of occurrence is P(A) = 0.4, P(B) = 0.1, P(C) = 0.2 and P(D) = 0.3. The Huffman code is a. A = 01 B = 111 C = 110 D = 10 b. A = 0, B = 100, C = 101, D = 11

Last Answer : b. A = 0, B = 100, C = 101, D = 11

Description : Use of glycopyrrolate in preanaesthetic medication serves the following purposes except: A. Prevents respiratory secretions during anaesthesia B. Guards against reflex vagal bradycardia during ... Produces amnesia for perioperative events D. Reduces the probability of occurrence of laryngospasm

Last Answer : C. Produces amnesia for perioperative events

Description : What is the probability of the occurrence of a number that is even or less than 3 when a fair die is rolled. a) 2/3 b)3/2 c)5/6 d)6/5

Last Answer : Answer: A) Let the event of the occurrence of a number that is even be A' and the event of the occurrence of a number that is less than 3 be B'. We need to find P(A or B). P(A) = 3/6 (even numbers = 2,4,6) P(B) = 2/6 ( ... = P(A) + P(B) - P(A or B)  = 3/6 + 2/6 - 1/6 P(A or B) = 4/6=2/3

Description : A steel bar 5 m × 50 mm is loaded with 250,000 N. If the modulus of elasticity of the material is 0.2  MN/mm2  and Poisson's ratio is 0.25, the change in the volume of the bar is:  (A) 1.125 cm3 (B) 2.125 cm3 (C) 3.125 cm3 (D) 4.125 cm

Last Answer : (C) 3.125 cm

Description : The ratio of lateral strain to axial strain of a homogeneous material, is known  (A) Yield ratio  (B) Hooke's ratio  (C) Poisson's ratio  (D) Plastic ratio 

Last Answer : (C) Poisson's ratio 

Description : An open-ended cylinder of radius and thickness is subjected to internal pressure . The Young's modulus for the material is and Poisson's ratio is . The longitudinal strain is (A) Zero (B) pr/TE (C) pr/2TE (D) None of these

Last Answer : (A) Zero

Description : For a given material Young's modulus is 200 GN/m2 and modulus of rigidity is 80 GN/m2 . The value of Poisson's ratio is (A) 0.15 (B) 0.20 (C) 0.25 (D) 0.30

Last Answer : (C) 0.25

Description : The law which states, "Within elastic limits strain produced is proportional to the stress producing  it", is known as  (A) Bernoulli's law  (B) Stress law  (C) Hooke's law  (D) Poisson's law

Last Answer : (C) Hooke's law 

Description : The value of Poisson's ratio always remains (A) Greater than one (B) Less than one (C) Equal to one (D) None of these

Last Answer : (B) Less than one

Description : Poisson's ratio for concrete (A) Remains constant (B) Increases with richer mixes (C) Decreases with richer mixes (D) None of these

Last Answer : Answer: Option B

Description : Normal Probability Curve should be (A) Positively skewed (B) Negatively skewed (C) Leptokurtic skewed (D) Zero skewed 

Last Answer : (D) Zero skewed

Description : Estimates from the planning stage will need to be refined as the project progresses,  because it is virtually impossible to develop an exact assessment of the project’s schedule  before the analysis and design phases are conducted.

Last Answer : Ans: True

Description : Commonly assumed probability distribution of arrival pattern is ....................... a. Poisson distribution b. Binomial distribution c. Normal distribution d. None of these

Last Answer : a. Poisson distribution

Description : What is Work Breakdown Structure (WBD) and how does it affect the work estimates of tasks/activities?

Last Answer : Work breakdown structure defines the work activities required for the project and the sub activities of each of the work requirement. The breakdown goes down to levels where all the work required ... and effort estimates can be accurate when everything about the work and dependencies are known.

Description : The flow-mass curve is graphical representation of (A) Cumulative discharge and time (B) Discharge and percentage probability of flow being equalled or exceeded (C) Cumulative discharge, volume and time in chronological order (D) Discharge and time in chronological order

Last Answer : Answer: Option C

Description : Explain the importance, occurrence and distribution of petroleum in India. -SST 10th

Last Answer : (i) Petroleum is the next major energy source in India after coal. (ii) Petroleum occurrence in India are associated with anticlines and fault traps in the rock formations of the tertiary age. ( ... is the most important oil field of Gujarat while Assam is the oldest oil producing state in India.

Description : The transformation required when data not follow normal distribution.

Last Answer : Ans. Data transformation

Description : f the mean and the median pertaining to a certain character of a population are of the same value, the following is most likely to occur (a) a bi-modal distribution (b) a T-shaped curve (c) a skewed curve (d) a normal distribution.

Last Answer : (d) a normal distribution.

Description : Which of the following is not a PERT event? (A) Site investigation started (B) Sessional work completed (C) Bus starts from Jaipur (D) Class is being attended

Last Answer : (D) Class is being attended

Description : The first method invented for planning projects, was (A) Bar chart method (B) Milestone chart (C) Critical path method (CPM) (D) Programme Evaluation and Review Technique (PERT)

Last Answer : (A) Bar chart method

Description : Pick up the PERT event from the following: (A) Digging of foundation started (B) Digging of foundation completed (C) Laying of concrete started (D) All the above

Last Answer : (D) All the above

Description : PERT is (A) An analytic in concept (B) Limited of event oriented diagrams (C) Used for research and development projects (D) All the above

Last Answer : (D) All the above

Description : Which of the following statements is correct? (A) Uniformity coefficient represents the shape of the particle size distribution curve. (B) For a well graded soil, both uniformity coefficient and coefficient of ... if it has most of the particles of about the same size (D) None of the above

Last Answer : Answer: Option D

Description : Distribution of shear intensity over a rectangular section of a beam, follows: (A) A circular curve (B) A straight line (C) A parabolic curve (D) An elliptical curve

Last Answer : Answer: Option C

Description : In a reinforced concrete beam , the shear stress distribution above the neutral axis following a (a) A straight line (b) Circular curve (c) Parabolic curve (d) All the above

Last Answer : (c) Parabolic curve

Description : In the time-cost optimisation, using CPM method for network analysis, the crashing of the activities along the critical path is done starting with the activity having (A) Longest duration (B) Highest cost slope (C) Least cost slope (D) Shortest duration

Last Answer : (C) Least cost slope

Description : Which of the following methods of structural analysis is a displacement method? (A) Moment distribution method (B) Column analogy method (C) Three moment equation (D) None of the above

Last Answer : (A) Moment distribution method

Description : Which of the following methods of structural analysis is a force method? (A) Slope deflection method (B) Column analogy method (C) Moment distribution method (D) None of the above

Last Answer : (B) Column analogy method

Description : The moment-distribution method in structural analysis falls in the category of (a) Displacement method (b) Force method (c) Flexibility method (d) First order approximate method

Last Answer : (a) Displacement method