When compared with the co-latitude of the place of observation, the declination of a circumpolar star is always, (a) Lesser (b) Greater (c) Equal (d) Either lesser or equal

When compared with the co-latitude of the place of observation, the declination of a circumpolar star is always,
(a) Lesser (b) Greater (c) Equal (d) Either lesser or equal
by

1 Answer

Answer :

(b) Greater
by

Related questions

While compared with singly reinforced beams, the depth of doubly reinforced beam is [ A ] Greater [ B ] Lesser [ C ] almost equal [ D ] twice

Description : While compared with singly reinforced beams, the depth of doubly reinforced beam is [ A ] Greater [ B ] Lesser [ C ] almost equal [ D ] twice

Last Answer : [ B ] Lesser

When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Description : When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Last Answer : [ B ] Greater

The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination (4) Latitude

Description : The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination (4) Latitude

Last Answer : (3) Declination Explanation: Magnetic declination is the angle between compass north (the direction the north end of a compass needle points) and true north (the direction along the earth's surface towards the geographic North Pole.

The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination(4) Latitude

Description : The angle between the magnetic meridian and the geographical meridian at a place is (1) Azimuth (2) Dip (3) Declination(4) Latitude

Last Answer : Declination

What is the difference between declination to latitude?

Description : What is the difference between declination to latitude?

Last Answer : Need answer

Pick up the correct statement from the following: (A) The horizontal angle between magnetic meridian and true meridian at a place is called magnetic declination or variance of the compass (B) The imaginary lines which pass through points at which the magnetic declinations are equal at a given time are called isogonic lines (C) The isogonic lines through places at which the declination is zero are termedagonic lines (D) All the above

Description : Pick up the correct statement from the following: (A) The horizontal angle between magnetic meridian and true meridian at a place is called magnetic declination or variance of the compass (B) The ... lines through places at which the declination is zero are termedagonic lines (D) All the above

Last Answer : (D) All the above

Kinetic friction is always A. lesser than static friction B. greater than static friction C. equal to static friction D. equal to contact force

Description : Kinetic friction is always A. lesser than static friction B. greater than static friction C. equal to static friction D. equal to contact force

Last Answer : lesser than static friction

Diurnal variation of magnetic declination is (A) Greater at equator than nearer the poles (B) Less at equator than nearer the poles (C) Less in summer than in winter (D) Same at all latitudes and during different months

Description : Diurnal variation of magnetic declination is (A) Greater at equator than nearer the poles (B) Less at equator than nearer the poles (C) Less in summer than in winter (D) Same at all latitudes and during different months

Last Answer : (B) Less at equator than nearer the poles

Pick up the correct statement from the following: (A) In remote sensing technique, the observation place, is called a platform (B) Platforms may be either stationary or mobile (C) Spatial resolution of the imaging system becomes poorer with increase of platform height (D) All of these

Description : Pick up the correct statement from the following: (A) In remote sensing technique, the observation place, is called a platform (B) Platforms may be either stationary or mobile (C) Spatial resolution of the imaging system becomes poorer with increase of platform height (D) All of these

Last Answer : Answer: Option D

Choose the correct statement about BEE Star rating label a. Higher the number of stars, greater will be the efficiency b. Lesser the number of stars, greater will be the efficiency c. Higher the number of stars, lesser will be the efficiency d. None of the above

Description : Choose the correct statement about BEE Star rating label a. Higher the number of stars, greater will be the efficiency b. Lesser the number of stars, greater will be the efficiency c. Higher the number of stars, lesser will be the efficiency d. None of the above

Last Answer : Higher the number of stars, greater will be the efficiency

Self-locking takes place when a) Coefficient of friction is equal to or greater than the tangent of the helix angle b) Coefficient of friction is lesser than or equal to the tangent of the helix angle c) Coefficient of friction is equal to or greater than the tangent of the helix angle d) None of the mentioned

Description : Self-locking takes place when a) Coefficient of friction is equal to or greater than the tangent of the helix angle b) Coefficient of friction is lesser than or equal to the tangent of the helix ... friction is equal to or greater than the tangent of the helix angle d) None of the mentioned

Last Answer : c) Coefficient of friction is equal to or greater than the tangent of the helix angle

Imaginary line passing through points having equal magnetic declination is termed as (A) Isogon (B) Agonic line (C) Isoclinic line (D) None of these

Description : Imaginary line passing through points having equal magnetic declination is termed as (A) Isogon (B) Agonic line (C) Isoclinic line (D) None of these

Last Answer : (A) Isogon

Drag co-efficient in hindered settling is __________ that in free settling. (A) Less than (B) Equal to (C) Not necessarily greater than (D) Always greater than

Description : Drag co-efficient in hindered settling is __________ that in free settling. (A) Less than (B) Equal to (C) Not necessarily greater than (D) Always greater than

Last Answer : (D) Always greater than

Magnetic declination at any place (A) Remains constant (B) Does not remain constant (C) Fluctuates (D) Changes abruptly

Description : Magnetic declination at any place (A) Remains constant (B) Does not remain constant (C) Fluctuates (D) Changes abruptly

Last Answer : (B) Does not remain constant

With identical beam and column, buckling occurs as compared to bending under a (a) Lesser load (b) Larger load (c) Equal load (d) None

Description : With identical beam and column, buckling occurs as compared to bending under a (a) Lesser load (b) Larger load (c) Equal load (d) None

Last Answer : (a) Lesser load

Where would you see the least number of circumpolar stars?

Description : Where would you see the least number of circumpolar stars?

Last Answer : At the equator, you will see no circumpolar stars.

Where would you see the least number of circumpolar stars?

Description : Where would you see the least number of circumpolar stars?

Last Answer : At the equator, you will see no circumpolar stars.

5Star air conditioner will provide the same amount of colling using ___________ power than 1 star air conditioner of same tonnage. a) Lesser c) more b) Equal d) all of the above

Description : 5Star air conditioner will provide the same amount of colling using ___________ power than 1 star air conditioner of same tonnage. a) Lesser c) more b) Equal d) all of the above

Last Answer : Equal

Pick up the correct statement from the following: (A) Higher the gauge, more deficient will be the rain catch (B) Heavier the rain, lesser will be the rain catch (C) The trees serving as wind brakes in the vicinity of the gauge, should not subtend angles greater than 45° (D) All the above

Description : Pick up the correct statement from the following: (A) Higher the gauge, more deficient will be the rain catch (B) Heavier the rain, lesser will be the rain catch (C) The trees serving as wind brakes in the vicinity of the gauge, should not subtend angles greater than 45° (D) All the above

Last Answer : Answer: Option D

The deficiency in rain catch due to vertical acceleration of air forced upward over the gauge, is (A) Greater for heavy rain (B) Greater for lighter rain (C) Greater for large drops (D) Lesser for small rain drops

Description : The deficiency in rain catch due to vertical acceleration of air forced upward over the gauge, is (A) Greater for heavy rain (B) Greater for lighter rain (C) Greater for large drops (D) Lesser for small rain drops

Last Answer : Answer: Option B

A thick liquid like syrup has a __________ viscosity than a light liquid like water. (A) Lesser (B) Greater (C) Same (D) None of these

Description : A thick liquid like syrup has a __________ viscosity than a light liquid like water. (A) Lesser (B) Greater (C) Same (D) None of these

Last Answer : Answer: Option B

The maximum of spacing of side face reinforcement shall not exceed [ A ] 300 mm [ B ] Web thickness [ C ] Lesser of (a) and (b) [ D ] Greater of (a) and (b)

Description : The maximum of spacing of side face reinforcement shall not exceed [ A ] 300 mm [ B ] Web thickness [ C ] Lesser of (a) and (b) [ D ] Greater of (a) and (b)

Last Answer : [ C ] Lesser of (a) and (b)

Torricelli's theorem states that the velocity ‘v’ of the liquid emerging from the bottom of the wide tank is given by √(2gh). In practice, this velocity is: A. equal to √(2gh) B. greater than √(2gh) C. lesser than √(2ghD. independent of height and gravitational field strength)

Description : Torricelli's theorem states that the velocity ‘v’ of the liquid emerging from the bottom of the wide tank is given by √(2gh). In practice, this velocity is: A. equal to √(2gh) B. greater than √(2gh) C. lesser than √(2gh) D. independent of height and gravitational field strength

Last Answer :  lesser than √(2gh

Temperature rise in partial bearing is ____ than full bearing. a) Lesser b) Greater c) Equal

Description : Temperature rise in partial bearing is ____ than full bearing. a) Lesser b) Greater c) Equal

Last Answer : a) Lesser

Coarse threads have helix angle _____ fine threads. a) Equal to b) Greater than c) Lesser than d) There is no relation

Description : Coarse threads have helix angle _____ fine threads. a) Equal to b) Greater than c) Lesser than d) There is no relation

Last Answer : c) Lesser than

The shock absorbing capacity of bolt can be increased by making the shank diameter ________ the root diameter. a) Lesser than b) Equal to c) Greater than d) No effect

Description : The shock absorbing capacity of bolt can be increased by making the shank diameter ________ the root diameter. a) Lesser than b) Equal to c) Greater than d) No effect

Last Answer : b) Equal to

With internationalization, after a point, the costs of organization complexity may be.........the benefits of internationlization? A. Equal B. Lesser than C. Greater than D. Not comparable to

Description : With internationalization, after a point, the costs of organization complexity may be.........the benefits of internationlization? A. Equal B. Lesser than C. Greater than D. Not comparable to

Last Answer : Greater than

The amount of phagocytosis done by the Plasmodium A-.is greater than by the water mold mycelium B- is lesser than by the water mold mycelium C- .is equal to by the water mold mycelium D-.none of the above

Description : The amount of phagocytosis done by the Plasmodium A-.is greater than by the water mold mycelium B- is lesser than by the water mold mycelium C- .is equal to by the water mold mycelium D-.none of the above

Last Answer : is greater than by the water mold mycelium

The number of sets of chromosomes in a dikaryotic cell A- is greater than diploid cell B- is lesser than diploid cell C- .is equal to diploid cell D- none of these

Description : The number of sets of chromosomes in a dikaryotic cell A- is greater than diploid cell B- is lesser than diploid cell C- .is equal to diploid cell D- none of these

Last Answer : .is equal to diploid cell

Tension on slack side in case of chain drive a) Lesser than on tight side b) Greater than on tight side c) Zero d) Equal to that on tight side

Description : Tension on slack side in case of chain drive a) Lesser than on tight side b) Greater than on tight side c) Zero d) Equal to that on tight side

Last Answer : c) Zero

Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Description : Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Last Answer : a. greater than the dynamic driction

Cd is always __________ Cc (A) Greater than (B) Less than (C) Equal to (D) Either more or less than

Description : Cd is always __________ Cc (A) Greater than (B) Less than (C) Equal to (D) Either more or less than

Last Answer : (A) Greater than

Which one of the following statements is correct? (a) Local atmospheric pressure is always lesser than standard atmospheric pressure (b) Local atmospheric pressure depends upon the elevation of the locality only (c) Standard atmospheric pressure is the mean atmospheric pressure at sea level (d) A barometer reads the difference between local, and standard atmospheric pressure

Description : Which one of the following statements is correct? (a) Local atmospheric pressure is always lesser than standard atmospheric pressure (b) Local atmospheric pressure depends upon the elevation of ... sea level (d) A barometer reads the difference between local, and standard atmospheric pressure

Last Answer : (c) Standard atmospheric pressure is the mean atmospheric pressure at sea level

The orthographical projection of a traverse leg upon the reference meridian, is known as (A) Departure of leg (B) Latitude to the leg (C) Co-ordinate of the leg (D) Bearing of the leg

Description : The orthographical projection of a traverse leg upon the reference meridian, is known as (A) Departure of leg (B) Latitude to the leg (C) Co-ordinate of the leg (D) Bearing of the leg

Last Answer : (B) Latitude to the leg

The co-ordinate of a point measured perpendicular to the parallel, is called (A) Total latitude (B) Meridian distance (C) Total departure (D) Consecutive co-ordinate

Description : The co-ordinate of a point measured perpendicular to the parallel, is called (A) Total latitude (B) Meridian distance (C) Total departure (D) Consecutive co-ordinate

Last Answer : (A) Total latitude

The horizontal angle between true meridian and magnetic meridian, is known (A) Bearing (B) Magnetic declination (C) Dip (D) Convergence

Description : The horizontal angle between true meridian and magnetic meridian, is known  (A) Bearing  (B) Magnetic declination( C) Dip (D) Convergence

Last Answer : (B) Magnetic declination

The magnetic bearing of a line is 32° and the magnetic declination is 10° 15' W. The true bearing is (A) 21° 45' (B) 42° 15' (C) 42° 15' W (D) 21° 45' W

Description : The magnetic bearing of a line is 32° and the magnetic declination is 10° 15' W. The true bearing is  (A) 21° 45'  (B) 42° 15'  (C) 42° 15' W (D) 21° 45' W

Last Answer : (A) 21° 45' 

If the declination of the needle is 10° W (A) Each of the whole circle reckoning has to be micros by 10° (B) In the quadrantal method, the correction is positive in the 1st and 3rd quadrants (C) In the quadrantal method, the corrections is negative in 2nd and 4th quadrants (D) All the above

Description : If the declination of the needle is 10° W (A) Each of the whole circle reckoning has to be micros by 10° (B) In the quadrantal method, the correction is positive in the 1st and 3rd quadrants (C) In the quadrantal method, the corrections is negative in 2nd and 4th quadrants (D) All the above

Last Answer : (D) All the above

Whole circle bearing of a line is preferred to a quadrantal bearing merely because (A) Bearing is not completely specified by an angle (B) Bearing is completely specified by an angle (C) Sign of the correction of magnetic declination is different in different quadrants (D) Its Trigonometrical values may be extracted from ordinary tables easily

Description : Whole circle bearing of a line is preferred to a quadrantal bearing merely because (A) Bearing is not completely specified by an angle (B) Bearing is completely specified by an angle ... different in different quadrants (D) Its Trigonometrical values may be extracted from ordinary tables easily

Last Answer : (B) Bearing is completely specified by an angle

The vertical angle between longitudinal axis of a freely suspended magnetic needle and a horizontal line at its pivot, is known (A) Declination (B) Azimuth (C) Dip (D) Bearing

Description : The vertical angle between longitudinal axis of a freely suspended magnetic needle and a horizontal line at its pivot, is known (A) Declination (B) Azimuth (C) Dip (D) Bearing

Last Answer : (C) Dip

The smaller horizontal angle between the true meridian and a survey line, is known (A) Declination (B) Bearing (C) Azimuth (D) Dip

Description : The smaller horizontal angle between the true meridian and a survey line, is known (A) Declination (B) Bearing (C) Azimuth (D) Dip

Last Answer : (C) Azimuth

The film co-efficient is decreased due to the presence of non-condensing gases in the vapors. The film co-efficient of superheated vapor as compared to that of saturated vapor is (A) More (B) Less (C) Some (D) Either more or less; depends on the nature of vapor

Description : The film co-efficient is decreased due to the presence of non-condensing gases in the vapors. The film co-efficient of superheated vapor as compared to that of saturated vapor is (A) More (B) Less (C) Some (D) Either more or less; depends on the nature of vapor

Last Answer : (C) Some

Yield line analysis by equilibrium method gives ------------------ to that of obtained by virtual work method [ A ] Equal values [ B ] Lesser values [ C ] Higher values [ D ] None of the above.

Description : Yield line analysis by equilibrium method gives ------------------ to that of obtained by virtual work method [ A ] Equal values [ B ] Lesser values [ C ] Higher values [ D ] None of the above.

Last Answer : [ A ] Equal values

In closed circuit grinding as compared to open circuit grinding, the (A) Specific surface of product is more (B) Product has lesser size uniformity (C) Production rate at a given limiting size is lower (D) Operation is economical

Description : In closed circuit grinding as compared to open circuit grinding, the (A) Specific surface of product is more (B) Product has lesser size uniformity (C) Production rate at a given limiting size is lower (D) Operation is economical

Last Answer : (D) Operation is economical

When a fluid flows over a solid surface, the (A) Velocity is uniform at any cross-section (B) Velocity gradient is zero at the solid surface (C) Resistance between the surface & the fluid is lesser as compared to that between the fluid layers themselves (D) Velocity is not zero at the solid surface

Description : When a fluid flows over a solid surface, the (A) Velocity is uniform at any cross-section (B) Velocity gradient is zero at the solid surface (C) Resistance between the surface & the fluid is lesser as compared to that between the fluid layers themselves (D) Velocity is not zero at the solid surface

Last Answer : (B) Velocity gradient is zero at the solid surface

Diaphragm electrolytic cell as compared to mercury electrolytic cell (A) Produces 70% NaOH solution (B) Requires less specific power consumption for the production of chlorine (C) Requires lesser investment for similar capacity (D) All (A), (B) and (C)

Description : Diaphragm electrolytic cell as compared to mercury electrolytic cell (A) Produces 70% NaOH solution (B) Requires less specific power consumption for the production of chlorine (C) Requires lesser investment for similar capacity (D) All (A), (B) and (C)

Last Answer : (C) Requires lesser investment for similar capacity

The discharge temperature of two stage compressor compared to single stage one is ____ a) Lesser b) Same c) Higher d) None

Description : The discharge temperature of two stage compressor compared to single stage one is ____ a) Lesser b) Same c) Higher d) None  

Last Answer : a) Lesser

The specific power consumption of non lubricated compressor compared to lubricated type is ____ a) Lesser b) Same c) Higher d) None

Description : The specific power consumption of non lubricated compressor compared to lubricated type is ____ a) Lesser b) Same c) Higher d) None 

Last Answer : c) Higher

The Fovea Palatinae are: A. Foramina covering the lesser palatine nerves and vessels B. Morphologically related to the formation of the premaxilla C. Located on either sides of the midline close to the junction of the hard and soft palate D. Closely related to the rugae of the palate

Description : The Fovea Palatinae are: A. Foramina covering the lesser palatine nerves and vessels B. Morphologically related to the formation of the premaxilla C. Located on either sides of the midline close to the junction of the hard and soft palate D. Closely related to the rugae of the palate

Last Answer : C. Located on either sides of the midline close to the junction of the hard and soft palate

The compressive strength of 100 mm cube as compared to 150 mm cube is always (A) Less (B) More (C) Equal (D) None of the above

Description : The compressive strength of 100 mm cube as compared to 150 mm cube is always (A) Less (B) More (C) Equal (D) None of the above

Last Answer : Answer: Option B