Detailed plotting is generally done by (A) Radiation (B) Traversing (C) Resection (D) All of the above

Detailed plotting is generally done by
(A) Radiation
(B) Traversing
(C) Resection
(D) All of the above
by

1 Answer

Answer :

(A) Radiation
by

Related questions

The plotting of inaccessible points in a plane-table survey can be done by the method of (a) Interpolation (b) Radiation (c) Intersection (d) Traversing

Description : The plotting of inaccessible points in a plane-table survey can be done by the method of (a) Interpolation (b) Radiation (c) Intersection (d) Traversing

Last Answer : (c) Intersection

Which one of the following procedures for getting accurate orientation is the most distinctive feature of the art of plane tabling? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Description : Which one of the following procedures for getting accurate orientation is the most distinctive feature of the art of plane tabling? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Last Answer : (D) Resection

The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Description : The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Last Answer : (C) (ii) and (iv)

The process of determining the locations of the instrument station by drawing re sectors from the locations of the known stations is (A) Radiation (B) Intersection (C) Resection (D) Traversing

Description : The process of determining the locations of the instrument station by drawing re sectors from the locations of the known stations is (A) Radiation (B) Intersection (C) Resection (D) Traversing

Last Answer : (C) Resection

Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Description : Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Last Answer : (B) Intersection

In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Description : In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Last Answer : (b) Resection

The method of plane tabling commonly used for establishing the instrument station is a method of (a) Radiation (b) Intersection* (c) Resection (d) Traversing

Description : The method of plane tabling commonly used for establishing the instrument station is a method of (a) Radiation (b) Intersection* (c) Resection (d) Traversing

Last Answer : (b) Intersection*

For locating an inaccessible point with the help of only a plane table, one should use (a) traversing (b) resection (c) radiation (e) Intersection*

Description : For locating an inaccessible point with the help of only a plane table, one should use (a) traversing (b) resection (c) radiation (e) Intersection*

Last Answer : (e) Intersection*

The two point problem and three point problem are methods of (A) Resection (B) Orientation (C) Traversing (D) Resection and orientation

Description : The two point problem and three point problem are methods of (A) Resection (B) Orientation (C) Traversing (D) Resection and orientation

Last Answer : (D) Resection and orientation

To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Description : To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Last Answer : (D) Two point problem

Intersection method of detailed plotting is most suitable for (A) Forests (B) Urban areas (C) Hilly areas (D) Plains

Description : Intersection method of detailed plotting is most suitable for (A) Forests (B) Urban areas (C) Hilly areas (D) Plains

Last Answer : (C) Hilly areas

Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Description : Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Last Answer : (D) Three point problem

Regarding plane-table survey, which of the following statements does not hold? (a) All the plotting work including contouring can be done in the field (b) It is quite suitable for small scale survey (c) Less number of control points are required (d) It can be done in all seasons

Description : Regarding plane-table survey, which of the following statements does not hold? (a) All the plotting work including contouring can be done in the field (b) It is quite suitable for small scale survey (c) Less number of control points are required (d) It can be done in all seasons

Last Answer : (d) It can be done in all seasons

Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Description : Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Last Answer : Answer: Option D

Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations? (A) Measuring angle and distance from one transit station (B) Measuring angles to the point from at least two stations (C) Measuring angle at one station and distance from other (D) Measuring distance from two points on traverse line

Description : Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations? (A) Measuring angle and distance from one transit station (B) ... at one station and distance from other (D) Measuring distance from two points on traverse line

Last Answer : (B) Measuring angles to the point from at least two stations

The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Description : The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Last Answer : (D) General layout of the chain lines

Pick up the method of surveying in which field observations and plotting proceed simultaneously from the following (A) Chain surveying (B) Compass surveying (C) Plan table surveying (D) Tacheometric surveying

Description : Pick up the method of surveying in which field observations and plotting proceed simultaneously from the following (A) Chain surveying (B) Compass surveying (C) Plan table surveying (D) Tacheometric surveying

Last Answer : (C) Plan table surveying

The most reliable method of plotting a theodolite traverse, is (A) By consecutive co-ordinates of each station (B) By independent co-ordinates of each station (C) By plotting included angles and scaling off each traverse leg (D) By the tangent method of plotting

Description : The most reliable method of plotting a theodolite traverse, is (A) By consecutive co-ordinates of each station (B) By independent co-ordinates of each station (C) By plotting included angles and scaling off each traverse leg (D) By the tangent method of plotting

Last Answer : (B) By independent co-ordinates of each station

The limiting length of an offset does not depend upon (A) Accuracy of the work (B) Method of setting out perpendiculars (C) Scale of plotting (D) Indefinite features to be surveyed

Description : The limiting length of an offset does not depend upon (A) Accuracy of the work (B) Method of setting out perpendiculars (C) Scale of plotting (D) Indefinite features to be surveyed

Last Answer : (D) Indefinite features to be surveyed

While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above

Description : While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above

Last Answer : (A) And plotting proceed simultaneously

The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Description : The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Last Answer : (C) Requires more labour

The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error such that each ray is equally rotated either clockwise or anti clockwise 5. The points obtained by three rays are the correct location. The correct sequence is (A) 1, 3, 2, 4, 5 (B) 1, 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Description : The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error ... 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Last Answer : (A) 1, 3, 2, 4, 5

Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and not the linear measurements (B) Linear measurements are correct and not the angular measurements (C) Angular and linear measurements are correct and not the plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Description : Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and ... plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Last Answer : (D) Angular and linear measurements and also plotting of the traverse are correct

The traveling salesman problem involves n cities with paths connecting the cities. The time taken for traversing through all the cities, without knowing in advance the length of a minimum tour, is ___________ a) O(n) b) O(n2) c) O(n!) d) O(n/2)

Description : The traveling salesman problem involves n cities with paths connecting the cities. The time taken for traversing through all the cities, without knowing in advance the length of a minimum tour, is ___________ a) O(n) b) O(n2) c) O(n!) d) O(n/2)

Last Answer : c) O(n!)

Draw sketch and explain method of traversing of plane table surveying.

Description : Draw sketch and explain method of traversing of plane table surveying. 

Last Answer : Procedure: 1.Set plane table over station A use plumbing fork for transferring station point from ground on sheet. Draw the direction of magnetic meridian with the help of compass. 2. With the ... scale Similarly, the table can be set at other successive station and traverse is completed.

Define : i) Traversing ii) Magnetic Meridian

Description : Define : i) Traversing ii) Magnetic Meridian

Last Answer : i) Traversing : Traversing is the series of survey lines connecting successive established traverse stations along the route of survey  ii) Magnetic Meridian : The direction indicated by ... and properly balanced Magnetic needle unaffected by local attractive force is called magnetic meridian.

Explain Procedure for chain and compass traversing.

Description : Explain Procedure for chain and compass traversing.

Last Answer : Chain and compass traversing : 1) Reconnaissance of the area to be surveyed is done. 2) Traverse stations are fixed. 3) The F.B and B.B of the traverse are measured by prismatic compass and ... occur when the traverse is plotted. 6) This error is adjusted graphically by using Bowditch Rule'. 

Compare theodolite traversing by included angle method with deflection angle method. Which one is suitable?

Description : Compare theodolite traversing by included angle method with deflection angle method. Which one is suitable?

Last Answer : Sr.No. Included angle method of traversing  Deflection angle method of traversing 1 This method is most suitable for closed traverse. This method is most suitable for open traverse. ... is suitable for long narrow strip like survey of roads, rivers, canals, railways, etc.

State the procedure of traversing by using total station.

Description : State the procedure of traversing by using total station.

Last Answer : The procedure is as follows. A) CENTERING THE TOTAL STATION: The instrument must be vertically above the survey station to ensure that horizontal angle observations are correct. The steps are as ... are plumbed over peg 1 and 3. Horizontal distances and angles are measured and recorded similarly.

The runtime for traversing all the nodes of a binary search tree with n nodes and printing them in an order is (A) O(lg n) (B) O(n lg n) (C) O(n) (D) O(n2 )

Description : The runtime for traversing all the nodes of a binary search tree with n nodes and printing them in an order is (A) O(lg n) (B) O(n lg n) (C) O(n) (D) O(n2 ) 

Last Answer : (C) O(n) 

______ involves traversing the entire file system, marking everything that can be accessed. (1) Index pointer (2) Garbage collection (3) File system (4) Stack pointer

Description : ______ involves traversing the entire file system, marking everything that can be accessed. (1) Index pointer (2) Garbage collection (3) File system (4) Stack pointer

Last Answer : Garbage collection

On plotting the points 0(0, 0), A(3, 0), 5(3, 4), C(0, 4) and joining OA, AB, BC and CO. -Maths 9th

Description : On plotting the points 0(0, 0), A(3, 0), 5(3, 4), C(0, 4) and joining OA, AB, BC and CO. -Maths 9th

Last Answer : (b) Here, point 0 (0, 0) is the origin. A(3, 0) lies on positive direction of X-axis, B (3, 4) lies in 1st quadrant and C (0, 4) lines on positive direction of Y-axis. On joining OA AB, BC and CO the figure obtained is a rectangle.

Without plotting the points indicate the quadrant in which they will lie, if -Maths 9th

Description : Without plotting the points indicate the quadrant in which they will lie, if -Maths 9th

Last Answer : (i) The given point is (- 3, 5). Here, abscissa is negative and ordinate is positive, so it lies in II quadrant. (ii) The given point is (-5, - 3). Here, abscissa and ordinate both are negative ... ) The given point is (3, 5). Here, abscissa and ordinate both are positive, so it lies in I quadrant.

On plotting the points 0(0, 0), A(3, 0), 5(3, 4), C(0, 4) and joining OA, AB, BC and CO. -Maths 9th

Description : On plotting the points 0(0, 0), A(3, 0), 5(3, 4), C(0, 4) and joining OA, AB, BC and CO. -Maths 9th

Last Answer : (b) Here, point 0 (0, 0) is the origin. A(3, 0) lies on positive direction of X-axis, B (3, 4) lies in 1st quadrant and C (0, 4) lines on positive direction of Y-axis. On joining OA AB, BC and CO the figure obtained is a rectangle.

Without plotting the points indicate the quadrant in which they will lie, if -Maths 9th

Description : Without plotting the points indicate the quadrant in which they will lie, if -Maths 9th

Last Answer : (i) The given point is (- 3, 5). Here, abscissa is negative and ordinate is positive, so it lies in II quadrant. (ii) The given point is (-5, - 3). Here, abscissa and ordinate both are negative ... ) The given point is (3, 5). Here, abscissa and ordinate both are positive, so it lies in I quadrant.

Without plotting the points indicate the quadrant in which they will lie, if: -Maths 9th

Description : Without plotting the points indicate the quadrant in which they will lie, if: -Maths 9th

Last Answer : Solution :- (i) III quadrant (iii) IV quadrant

Without plotting the points indicate the quadrant in which they lie, if : (i) ordinate is 5 and abscissa is – 3 (ii) abscissa is -5 and ordinate is – 3 -Maths 9th

Description : Without plotting the points indicate the quadrant in which they lie, if : (i) ordinate is 5 and abscissa is – 3 (ii) abscissa is -5 and ordinate is – 3 -Maths 9th

Last Answer : answer:

Without plotting the points indicate the quadrant in which they will lie, if (i) the ordinate is 5 and abscissa is – 3 -Maths 9th

Description : Without plotting the points indicate the quadrant in which they will lie, if (i) the ordinate is 5 and abscissa is – 3 -Maths 9th

Last Answer : (i) In the point (−3,5) abscissa is negative and ordinate is positive, so it lies in the second quadrant. (ii) In the point (−5,−3) abscissa and ordinate both are negative, so it lies in the ... . (iv) In the point (3,5) abscissa and ordinate both are positive, so it lies in the first quadrant

What role does the infinitive phrase play in the sentence Mary Stuart Queen of Scott and was caught plotting to overthrow Queen Elizabeth I?

Description : What role does the infinitive phrase play in the sentence Mary Stuart Queen of Scott and was caught plotting to overthrow Queen Elizabeth I?

Last Answer : Need answer

What is the CPT code for radical resection of a 2.7 cm sarcoma of the soft tissue of the upper back?

Description : What is the CPT code for radical resection of a 2.7 cm sarcoma of the soft tissue of the upper back?

Last Answer : Feel Free to Answer

When Santana is plotting points on a graph. The ratio of y y -value to x x -value is 3 3 to 4 4 for each point. What will be the x x -value of a point with a y y -value of 12 12?

Description : When Santana is plotting points on a graph. The ratio of y y -value to x x -value is 3 3 to 4 4 for each point. What will be the x x -value of a point with a y y -value of 12 12?

Last Answer : It will be 16.

Small bowel resection?

Description : Small bowel resection?

Last Answer : DefinitionSmall bowel resection is surgery to remove part or all of your small bowel. It is done when part of your small bowel is blocked or diseased.The small bowel is also called the small intestine. ... instruments through these cuts.You may also have a cut of about 2 to 3 inches if your surge

Large bowel resection?

Description : Large bowel resection?

Last Answer : DefinitionLarge bowel resection is surgery to remove all or part of your large bowel. This surgery is also called colectomy. Removal of the entire colon and rectum is called a ... - partial; Abdominal perineal resectionDescriptionYou will receive general anesthesia right before your surgery. This

What happens during a bowel resection?

Description : What happens during a bowel resection?

Last Answer : During this procedure one or more segments of the small intestine are removed. This procedure may be performed if you have Cancer, Crohn's disease or Ulcers.

Wounds are classified according to the likelihood of bacterial contamination. Which of the following statement(s) is/are true concerning wound classifications? a. A clean-contaminated wound would be that associated with an elective colon resection with adequate mechanical and antibiotic bowel preparation b. A contaminated wound would include a resection of obstructed bowel with gross spillage of intestinal contents c. In a clean wound, no viscus is entered d. Antibiotic prophylaxis should be administered for all clean-contaminated and contaminated wounds and selectively in patients involving a clean wound

Description : Wounds are classified according to the likelihood of bacterial contamination. Which of the following statement(s) is/are true concerning wound classifications? a. A clean-contaminated wound would ... all clean-contaminated and contaminated wounds and selectively in patients involving a clean wound

Last Answer : Answer: a, b, c, d Wounds are classified under three classes according to the likelihood of bacterial contamination: 1) clean (no viscus is entered; e.g., herniorrhaphy); 2) clean- ... tenet involves cases in which a prosthetic material may be used (artificial joint, heart valve, tissue patch)

If a necrotizing soft tissue infection is considered, therapy mandates: a. Empiric administration of antibiotics active against gram-positive, gram-negative, and anaerobic bacteria b. Due to usually resistant species, penicillin is not indicated c. Immediate operative intervention and aggressive resection of all involved tissues is mandatory d. The use of hyperbaric oxygen has been demonstrated to be clearly advantageous

Description : If a necrotizing soft tissue infection is considered, therapy mandates: a. Empiric administration of antibiotics active against gram-positive, gram-negative, and anaerobic bacteria b. Due to usually ... is mandatory d. The use of hyperbaric oxygen has been demonstrated to be clearly advantageous

Last Answer : Answer: a, c Identification of a necrotizing, soft tissue infection mandates immediate operative intervention with aggressive resection of all involved tissues and empiric ... remains without controlled trials demonstrating any additional benefits derived from hyperbaric oxygen therapy

A number of prospective clinical trials have addressed the role of total parenteral nutrition in the cancer patient. The results have been somewhat conflicting. Which of the following statement(s) have been proven correct by prospective trials? a. Preoperative TPN is beneficial in surgical patients with severe preoperative nutrition b. Postoperative TPN is of value following pancreatic resection c. Routine use of perioperative (including prior to the procedure) TPN is of benefit in patients undergoing hepatectomy for hepatoma d. TPN is of no benefit in patients undergoing bone marrow transplant

Description : A number of prospective clinical trials have addressed the role of total parenteral nutrition in the cancer patient. The results have been somewhat conflicting. Which of the following statement(s) ... hepatectomy for hepatoma d. TPN is of no benefit in patients undergoing bone marrow transplant

Last Answer : Answer: a, c Numerous clinical trials have failed to yield a consensus with regard to the efficacy of TPN in cancer patients. In 1991, a multicenter VA cooperative trial demonstrated ... patients receiving bone marrow transplantation has also been shown to be a valuable component of overall care

Rank the following laboratory tests and procedures in terms of their relative value to a 65-year-old woman who is to undergo elective resection of a sigmoid cancer. A. Carcinoembryonic antigen (CEA). B. Blood urea nitrogen (BUN). C. Electrocardiogram (ECG). D. Hemoglobin concentration (Hgb). E. Serum creatinine (Cr). F. Arterial blood oxygen tension (PaO 2) on room air. G. Serum sodium concentration (Na+).

Description : Rank the following laboratory tests and procedures in terms of their relative value to a 65-year-old woman who is to undergo elective resection of a sigmoid cancer. A. Carcinoembryonic antigen (CEA). B. ... Arterial blood oxygen tension (PaO 2) on room air. G. Serum sodium concentration (Na+).

Last Answer : Answer: CDFEBAG DISCUSSION: The most important test by far is the electrocardiogram, with its capacity to indicate signs of occult heart disease. The second most important evaluation is the hemoglobin ... for resection of the colon is always normal and would be of least value among these tests

A straight line is obtained on plotting reciprocal of filtration rate vs. the volume of filtrate for __________ flow of filtrate. (A) Compressible cakes and laminar (B) Incompressible cake and laminar (C) Compressible cake and turbulent (D) Incompressible cake and turbulent

Description : A straight line is obtained on plotting reciprocal of filtration rate vs. the volume of filtrate for __________ flow of filtrate. (A) Compressible cakes and laminar (B) Incompressible cake and laminar (C) Compressible cake and turbulent (D) Incompressible cake and turbulent

Last Answer : (B) Incompressible cake and laminar