Which one of the following procedures for getting accurate orientation is the most distinctive feature of the art of plane tabling? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Which one of the following procedures for getting accurate orientation is the most distinctive
feature of the art of plane tabling?
(A) Radiation
(B) Intersection
(C) Traversing
(D) Resection
by

1 Answer

Answer :

(D) Resection
by

Related questions

The method of plane tabling commonly used for establishing the instrument station is a method of (a) Radiation (b) Intersection* (c) Resection (d) Traversing

Description : The method of plane tabling commonly used for establishing the instrument station is a method of (a) Radiation (b) Intersection* (c) Resection (d) Traversing

Last Answer : (b) Intersection*

The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Description : The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Last Answer : (C) (ii) and (iv)

Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Description : Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Last Answer : (B) Intersection

In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Description : In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Last Answer : (b) Resection

For locating an inaccessible point with the help of only a plane table, one should use (a) traversing (b) resection (c) radiation (e) Intersection*

Description : For locating an inaccessible point with the help of only a plane table, one should use (a) traversing (b) resection (c) radiation (e) Intersection*

Last Answer : (e) Intersection*

The process of determining the locations of the instrument station by drawing re sectors from the locations of the known stations is (A) Radiation (B) Intersection (C) Resection (D) Traversing

Description : The process of determining the locations of the instrument station by drawing re sectors from the locations of the known stations is (A) Radiation (B) Intersection (C) Resection (D) Traversing

Last Answer : (C) Resection

The two point problem and three point problem are methods of (A) Resection (B) Orientation (C) Traversing (D) Resection and orientation

Description : The two point problem and three point problem are methods of (A) Resection (B) Orientation (C) Traversing (D) Resection and orientation

Last Answer : (D) Resection and orientation

The plotting of inaccessible points in a plane-table survey can be done by the method of (a) Interpolation (b) Radiation (c) Intersection (d) Traversing

Description : The plotting of inaccessible points in a plane-table survey can be done by the method of (a) Interpolation (b) Radiation (c) Intersection (d) Traversing

Last Answer : (c) Intersection

Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Description : Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Last Answer : (D) Three point problem

To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Description : To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Last Answer : (D) Two point problem

Detailed plotting is generally done by (A) Radiation (B) Traversing (C) Resection (D) All of the above

Description : Detailed plotting is generally done by (A) Radiation (B) Traversing (C) Resection (D) All of the above

Last Answer : (A) Radiation

Write any four advantages of intersection method of plane tabling over radiation method of plane tabling.

Description : Write any four advantages of intersection method of plane tabling over radiation method of plane tabling.

Last Answer : Advantages of intersection method: 1. Interection method requires less ground distance measurement than radiation method. 2. By this method we can locate inaccessible points which cannot be ... to radiation method, intersection method eliminates undulation error, bisection error and plotting errors.

The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error such that each ray is equally rotated either clockwise or anti clockwise 5. The points obtained by three rays are the correct location. The correct sequence is (A) 1, 3, 2, 4, 5 (B) 1, 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Description : The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error ... 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Last Answer : (A) 1, 3, 2, 4, 5

Define orientation and principle of plane tabling.

Description : Define orientation and principle of plane tabling. 

Last Answer : Orientation: The orientation of plane table means keeping the plane table at all stations parallel to the position it occupied at first station. Principles of plane table survey: 1. The rays drawn from ... same as that of previous station i.e. orientation should be done at each changed station.  

Explain with neat sketch the procedure of radiation method of plane tabling.

Description : Explain with neat sketch the procedure of radiation method of plane tabling.

Last Answer : 1. The table is set at suitable station e.g. P from where all stations can be sighted and measured. 2. After centering and leveling, mark station P as P' on sheet. 3. Suppose stations A, B, C, and D are ... marked as pa. 5. Similarly station B, C and D are bisected and marked as b, c and d.

The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Description : The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Last Answer : (C) Requires more labour

One of the Lehmann's rules of plane tabling, is (A) Location of the instrument station is always distant from each of the three rays from the known points in proportion to their distances (B) When looking in the direction of each of the given points, the instrument station will be on the right side of one and left side of the other ray (C) When the instrument station is outside the circumscribing circle its location is always on the opposite side of the ray to the most distant point as the inter-section of the other two rays (D) None of these

Description : One of the Lehmann's rules of plane tabling, is  (A) Location of the instrument station is always distant from each of the three rays from the  known points in proportion to their distances  ( ... to the most distant point as the inter-section of the other two rays  (D) None of these 

Last Answer : (A) Location of the instrument station is always distant from each of the three rays from the  known points in proportion to their distances 

While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above

Description : While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above

Last Answer : (A) And plotting proceed simultaneously

The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as (A) Plane alidade (B) Telescopic alidade (C) Clinometer (D) Tacheometer

Description : The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as (A) Plane alidade (B) Telescopic alidade (C) Clinometer (D) Tacheometer

Last Answer : (B) Telescopic alidade

Compare radiation and intersection methods of plane table surveying on any two parameters.

Description : Compare radiation and intersection methods of plane table surveying on any two parameters. 

Last Answer : Radiation method Intersection method 1. It requires the plane table to occupy a single station.  1. This method requires setting the table up at minimum of two stations.  ... for locating inaccessible points by the intersection of the rays drawn from two instruments stations. 

Rank the following laboratory tests and procedures in terms of their relative value to a 65-year-old woman who is to undergo elective resection of a sigmoid cancer. A. Carcinoembryonic antigen (CEA). B. Blood urea nitrogen (BUN). C. Electrocardiogram (ECG). D. Hemoglobin concentration (Hgb). E. Serum creatinine (Cr). F. Arterial blood oxygen tension (PaO 2) on room air. G. Serum sodium concentration (Na+).

Description : Rank the following laboratory tests and procedures in terms of their relative value to a 65-year-old woman who is to undergo elective resection of a sigmoid cancer. A. Carcinoembryonic antigen (CEA). B. ... Arterial blood oxygen tension (PaO 2) on room air. G. Serum sodium concentration (Na+).

Last Answer : Answer: CDFEBAG DISCUSSION: The most important test by far is the electrocardiogram, with its capacity to indicate signs of occult heart disease. The second most important evaluation is the hemoglobin ... for resection of the colon is always normal and would be of least value among these tests

Explain errors occurred due to manipulation and sighting in plane tabling.

Description : Explain errors occurred due to manipulation and sighting in plane tabling.

Last Answer : i) The board not being horizontal- This error affects chiefly the measurement of vertical angles. ii) The table not being accurately centered. The plotted position of the occupied station not ... and correct any displacement. v) The defective sighting- The object not being correctly sighted.

Enlist the methods of plane tabling.

Description : Enlist the methods of plane tabling. 

Last Answer : Method of Surveying with the plane table are : 1) Radiation 2) Intersection 3) Traversing 4) Resection

What are the sources of errors in plane tabling?

Description : What are the sources of errors in plane tabling?

Last Answer : The following are the sources of errors in plane tabling 1) The board not being horizontal 2) The table not being accurately centered 3) The table not being Correctly oriented 4) The objects ... through the station point 7) Inaccuracy in plotting 8) The expansion and contraction of the paper 

Draw sketch and explain method of traversing of plane table surveying.

Description : Draw sketch and explain method of traversing of plane table surveying. 

Last Answer : Procedure: 1.Set plane table over station A use plumbing fork for transferring station point from ground on sheet. Draw the direction of magnetic meridian with the help of compass. 2. With the ... scale Similarly, the table can be set at other successive station and traverse is completed.

Describe in brief resection method of plane table surveying.

Description : Describe in brief resection method of plane table surveying.

Last Answer : This method is used for establishing the instrument stations only. After fixing the stations, details are located either by radiation or intersection. The characteristic feature of resection is that the point ... of resection are (1)The Two Point Problem, and (2)Three Point Problem.

While working on a plane table, the correct rule is: (A) Draw continuous lines from all instrument stations (B) Draw short rays sufficient to contain the points sought (C) Intersection should be obtained by actually drawing second rays (D) Take maximum number of sights as possible from each station to distant objects

Description : While working on a plane table, the correct rule is: (A) Draw continuous lines from all instrument stations (B) Draw short rays sufficient to contain the points sought (C) Intersection ... drawing second rays (D) Take maximum number of sights as possible from each station to distant objects

Last Answer : (B) Draw short rays sufficient to contain the points sought

In setting up a plane table at any station (A) Levelling is done first (B) Centering is done first (C) Both levelling and centering are done simultaneously (D) Orientation is done first

Description : In setting up a plane table at any station (A) Levelling is done first (B) Centering is done first (C) Both levelling and centering are done simultaneously (D) Orientation is done first

Last Answer : (C) Both levelling and centering are done simultaneously

Orientation of a plane table by solving two point problems is only adopted when (A) Saving of time is a main factor (B) Better accuracy is a main factor (C) Given points are inaccessible (D) None of these

Description : Orientation of a plane table by solving two point problems is only adopted when (A) Saving of time is a main factor (B) Better accuracy is a main factor (C) Given points are inaccessible (D) None of these

Last Answer : (C) Given points are inaccessible

To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab in line with AB. A ray is then drawn towards and at the table is oriented by back ray method. The orientation so obtained, is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Description : To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab ... , is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Last Answer : (C) Manifold and correct

The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Description : The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Last Answer : (C) Orientation

After fixing the plane table to the tripod, the main operations which are needed at each plane table station are (i) Levelling (ii) Orientation (iii) Centering The correct sequence of these operations is (A) (i), (ii), (iii) (B) (i), (iii), (ii) (C) (iii), (i), (ii) (D) (ii), (iii), (i)

Description : After fixing the plane table to the tripod, the main operations which are needed at each plane table station are (i) Levelling (ii) Orientation (iii) Centering The correct sequence of these operations is (A) (i), (ii), (iii) (B) (i), (iii), (ii) (C) (iii), (i), (ii) (D) (ii), (iii), (i)

Last Answer : (B) (i), (iii), (ii)

What would you say is the most distinctive feature of the AK-47 and its clones?

Description : What would you say is the most distinctive feature of the AK-47 and its clones?

Last Answer : answer:Loose tolerance reliability. Easy to manufacture; thus ubiquitous and compatible. The AK-47 is the Willys Jeep of guns. Just an instant hit. Cheap and easy to produce. Aesthetically it resonates. I'm ... became the same thing. It's like Japanese beholding a pair of Levi's or a custom 1911.

Most distinctive feature of democracy is that its examination never gets over.' -SST 10th

Description : Most distinctive feature of democracy is that its examination never gets over.' -SST 10th

Last Answer : Expectations from a democracy functions as the criteria for judging any democratic system of governance. 1. The level of scrutiny and analysis does not stop in a democracy. Passing from one situation to ... vote makes a difference to the way the government is run and to their own self-interest.

What is the most distinctive feature of a concrete poem?

Description : What is the most distinctive feature of a concrete poem?

Last Answer : It's shape imitates it's meaning

The distinctive feature of the isoenzyme cyclooxygenase-2 is (a) It is not inhibited by indomethacin (b) It is inducible (c) It generates cytoprotective prostagladins in gastric mucosa (d) It is found only in foetal tissues

Description : The distinctive feature of the isoenzyme cyclooxygenase-2 is (a) It is not inhibited by indomethacin (b) It is inducible (c) It generates cytoprotective prostagladins in gastric mucosa (d) It is found only in foetal tissues

Last Answer : Ans: B

Why vascular tissue is considered a distinctive feature responsible for survival of plants in terrestrial plants?

Description : Why vascular tissue is considered a distinctive feature responsible for survival of plants in terrestrial plants?

Last Answer : Fossils of plants show that vascular tissue appear 400 million years ago. It is believed that aquatic plants moved to terrestrial environment and adaptations like vascular tissue, protected seeds, true roots ... root, stem and leaves. It also enable plant to grow upright i.e. become taller.

The distinctive feature of secnidazole is: A. It is not absorbed after oral ingestion B. It is recommended for single dose treatment of intestinal amoebiasis C. It is effective in intestinal but not in hepatic amoebiasis D. It is effective in both trichomonas as well as monilial vaginitis

Description : The distinctive feature of secnidazole is: A. It is not absorbed after oral ingestion B. It is recommended for single dose treatment of intestinal amoebiasis C. It is effective in intestinal but not in hepatic amoebiasis D. It is effective in both trichomonas as well as monilial vaginitis

Last Answer : B. It is recommended for single dose treatment of intestinal amoebiasis

The distinctive feature of terbinafine is: A. It is highly effective in histoplasmosis B. It can be used topically as well as orally for dermatophytosis C. It inhibits Mucor and Aspergillus as well D. Applied intravaginally it cures both candida as well as trichomonas vaginitis

Description : The distinctive feature of terbinafine is: A. It is highly effective in histoplasmosis B. It can be used topically as well as orally for dermatophytosis C. It inhibits Mucor and Aspergillus as well D. Applied intravaginally it cures both candida as well as trichomonas vaginitis

Last Answer : B. It can be used topically as well as orally for dermatophytosis

The distinctive feature(s) of sparfloxacin compared to ciprofloxacin is/are: A. Enhanced activity against gram positive bacteria B. Lack of pharmacokinetic interaction with theophylline and warfarin C. Higher incidence of phototoxic reaction D. All of the above

Description : The distinctive feature(s) of sparfloxacin compared to ciprofloxacin is/are: A. Enhanced activity against gram positive bacteria B. Lack of pharmacokinetic interaction with theophylline and warfarin C. Higher incidence of phototoxic reaction D. All of the above

Last Answer : D. All of the above

The distinctive feature(s) of methadone compared to morphine is/are: A. High oral bioavailability B. High plasma protein and tissue binding C. Delayed and milder withdrawal symptoms in dependent subjects D. All of the above

Description : The distinctive feature(s) of methadone compared to morphine is/are: A. High oral bioavailability B. High plasma protein and tissue binding C. Delayed and milder withdrawal symptoms in dependent subjects D. All of the above

Last Answer : D. All of the above

Agonist induced autophosphorylation, internalization and down regulation is a distinctive feature of: A. G-protein coupled receptors B. Intrinsic ion channel containing receptors C. Tyrosine protein kinase receptors D. Receptors regulating gene expression

Description : Agonist induced autophosphorylation, internalization and down regulation is a distinctive feature of: A. G-protein coupled receptors B. Intrinsic ion channel containing receptors C. Tyrosine protein kinase receptors D. Receptors regulating gene expression

Last Answer : C. Tyrosine protein kinase receptors

The distinctive feature of nimesulide is: A. It does not inhibit prostaglandin synthesis B. It does not cause gastric irritation C. It is usually well tolerated by aspirin intolerant asthma patients D. It is not bound to plasma proteins

Description : The distinctive feature of nimesulide is: A. It does not inhibit prostaglandin synthesis B. It does not cause gastric irritation C. It is usually well tolerated by aspirin intolerant asthma patients D. It is not bound to plasma proteins

Last Answer : C. It is usually well tolerated by aspirin intolerant asthma patients

The distinctive feature of the isoenzyme cyclooxygenase-2 is: A. It is not inhibited by indomethacin B. It is inducible C. It generates cytoprotective prostagladins in gastric mucosa D. It is found only in foetal tissues

Description : The distinctive feature of the isoenzyme cyclooxygenase-2 is: A. It is not inhibited by indomethacin B. It is inducible C. It generates cytoprotective prostagladins in gastric mucosa D. It is found only in foetal tissues

Last Answer : B. It is inducible

Blockade of both dopamine D2 and serotonin 5-HT2A/2C receptors is a distinctive feature of: A. Pimozide B. Haloperidol C. Ketanserin D. Clozapine

Description : Blockade of both dopamine D2 and serotonin 5-HT2A/2C receptors is a distinctive feature of: A. Pimozide B. Haloperidol C. Ketanserin D. Clozapine

Last Answer : D. Clozapine

Agonist induced autophosphorylation, internalization and down regulation is a distinctive feature of: A. G-protein coupled receptors B. Intrinsic ion channel containing receptors C. Tyrosine protein kinase receptors D. Receptors regulating gene expression

Description : Agonist induced autophosphorylation, internalization and down regulation is a distinctive feature of: A. G-protein coupled receptors B. Intrinsic ion channel containing receptors C. Tyrosine protein kinase receptors D. Receptors regulating gene expression

Last Answer : C. Tyrosine protein kinase receptors

Which among the following is a distinctive feature by which a CD ROM drive is classified in a personal computer ? (1) Software bundle (2) Data transfer rate (3) Memory capacity (4) Storage period

Description : Which among the following is a distinctive feature by which a CD ROM drive is classified in a personal computer ? (1) Software bundle (2) Data transfer rate (3) Memory capacity (4) Storage period

Last Answer : Data transfer rate

Define orientation. State two methods of orientation. Which method is most accurate and why?

Description : Define orientation. State two methods of orientation. Which method is most accurate and why? 

Last Answer : Orientation is the process of keeping plane table in same position as that is occupied in previous station. Methods of orientation: i) Magnetic meridian method using trough compass ii) Back ... and not by using trough compass. Therefore there is no error occurring due to local attraction.