The process of determining the locations of the instrument station by drawing re sectors from the locations of the known stations is (A) Radiation (B) Intersection (C) Resection (D) Traversing

The process of determining the locations of the instrument station by drawing re sectors from the
locations of the known stations is
(A) Radiation
(B) Intersection
(C) Resection
(D) Traversing
by

1 Answer

Answer :

(C) Resection
by

Related questions

In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Description : In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Last Answer : (b) Resection

The method of plane tabling commonly used for establishing the instrument station is a method of (a) Radiation (b) Intersection* (c) Resection (d) Traversing

Description : The method of plane tabling commonly used for establishing the instrument station is a method of (a) Radiation (b) Intersection* (c) Resection (d) Traversing

Last Answer : (b) Intersection*

The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Description : The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Last Answer : (C) (ii) and (iv)

Which one of the following procedures for getting accurate orientation is the most distinctive feature of the art of plane tabling? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Description : Which one of the following procedures for getting accurate orientation is the most distinctive feature of the art of plane tabling? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Last Answer : (D) Resection

Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Description : Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Last Answer : (B) Intersection

For locating an inaccessible point with the help of only a plane table, one should use (a) traversing (b) resection (c) radiation (e) Intersection*

Description : For locating an inaccessible point with the help of only a plane table, one should use (a) traversing (b) resection (c) radiation (e) Intersection*

Last Answer : (e) Intersection*

While working on a plane table, the correct rule is: (A) Draw continuous lines from all instrument stations (B) Draw short rays sufficient to contain the points sought (C) Intersection should be obtained by actually drawing second rays (D) Take maximum number of sights as possible from each station to distant objects

Description : While working on a plane table, the correct rule is: (A) Draw continuous lines from all instrument stations (B) Draw short rays sufficient to contain the points sought (C) Intersection ... drawing second rays (D) Take maximum number of sights as possible from each station to distant objects

Last Answer : (B) Draw short rays sufficient to contain the points sought

Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Description : Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Last Answer : (D) Three point problem

Detailed plotting is generally done by (A) Radiation (B) Traversing (C) Resection (D) All of the above

Description : Detailed plotting is generally done by (A) Radiation (B) Traversing (C) Resection (D) All of the above

Last Answer : (A) Radiation

The plotting of inaccessible points in a plane-table survey can be done by the method of (a) Interpolation (b) Radiation (c) Intersection (d) Traversing

Description : The plotting of inaccessible points in a plane-table survey can be done by the method of (a) Interpolation (b) Radiation (c) Intersection (d) Traversing

Last Answer : (c) Intersection

To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Description : To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Last Answer : (D) Two point problem

Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations? (A) Measuring angle and distance from one transit station (B) Measuring angles to the point from at least two stations (C) Measuring angle at one station and distance from other (D) Measuring distance from two points on traverse line

Description : Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations? (A) Measuring angle and distance from one transit station (B) ... at one station and distance from other (D) Measuring distance from two points on traverse line

Last Answer : (B) Measuring angles to the point from at least two stations

The two point problem and three point problem are methods of (A) Resection (B) Orientation (C) Traversing (D) Resection and orientation

Description : The two point problem and three point problem are methods of (A) Resection (B) Orientation (C) Traversing (D) Resection and orientation

Last Answer : (D) Resection and orientation

The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error such that each ray is equally rotated either clockwise or anti clockwise 5. The points obtained by three rays are the correct location. The correct sequence is (A) 1, 3, 2, 4, 5 (B) 1, 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Description : The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error ... 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Last Answer : (A) 1, 3, 2, 4, 5

The difference of levels between two stations A and B is to be determined. For best results, the instrument station should be (A) Equidistant from A and B (B) Closer to the higher station (C) Closer to the lower station (D) As far as possible from the line AB

Description : The difference of levels between two stations A and B is to be determined. For best results, the instrument station should be (A) Equidistant from A and B (B) Closer to the higher station (C) Closer to the lower station (D) As far as possible from the line AB

Last Answer : (A) Equidistant from A and B

State the procedure of traversing by using total station.

Description : State the procedure of traversing by using total station.

Last Answer : The procedure is as follows. A) CENTERING THE TOTAL STATION: The instrument must be vertically above the survey station to ensure that horizontal angle observations are correct. The steps are as ... are plumbed over peg 1 and 3. Horizontal distances and angles are measured and recorded similarly.

Which of the following options is used for unobstructed locations (such as an unseen intersection)?

Description : Shifts to a lower gear to create a reserve of power that is used either on the engine brake or to get out of a critical situation quickly. Increase your speed to get out of a critical situation as soon as possible. It is enough to be careful to follow the rules.

Last Answer : 3. It is enough to be careful to follow the rules.

Which of the following are not among the eight components of revenue and volume for the service firm? a. quality quality of the management management b. shipment cost of finished goods c. purchasing purchasing power of the customer-drawing customer-drawing area d. uniqueness uniqueness of the firm's and the competitor's competitor's locations locations e. competition competition in the area

Description : Which of the following are not among the eight components of revenue and volume for the service firm? a. quality quality of the management management b. shipment cost of finished goods c. ... the firm's and the competitor's competitor's locations locations e. competition competition in the area

Last Answer : b. shipment cost of finished goods

One of the Lehmann's rules of plane tabling, is (A) Location of the instrument station is always distant from each of the three rays from the known points in proportion to their distances (B) When looking in the direction of each of the given points, the instrument station will be on the right side of one and left side of the other ray (C) When the instrument station is outside the circumscribing circle its location is always on the opposite side of the ray to the most distant point as the inter-section of the other two rays (D) None of these

Description : One of the Lehmann's rules of plane tabling, is  (A) Location of the instrument station is always distant from each of the three rays from the  known points in proportion to their distances  ( ... to the most distant point as the inter-section of the other two rays  (D) None of these 

Last Answer : (A) Location of the instrument station is always distant from each of the three rays from the  known points in proportion to their distances 

For locating a distant object visible from two transit stations, the method usually preferred to, is (A) Angles and distances from transit stations (B) Angles from two transit stations (C) Distance from two transit stations (D) Angle from one transit station and distance from the other

Description : For locating a distant object visible from two transit stations, the method usually preferred to, is  (A) Angles and distances from transit stations  (B) Angles from two transit stations  ... from two transit stations  (D) Angle from one transit station and distance from the other 

Last Answer : (B) Angles from two transit stations 

Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and not the linear measurements (B) Linear measurements are correct and not the angular measurements (C) Angular and linear measurements are correct and not the plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Description : Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and ... plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Last Answer : (D) Angular and linear measurements and also plotting of the traverse are correct

The horizontal angles from the boat between A and B and B and C, the stations on the shore are 1 2. The distances AB = L1 and BC = L2 2 at C between the boat and station B between A and C at B). (A) 1 2) = (L2 1/L1 2) = K (B) t 2 = 360° - 1 2 (C) 2 = sin /(K + ) (D) All the above

Description : The horizontal angles from the boat between A and B and B and C, the stations on the shore are 1 2. The distances AB = L1 and BC = L2 2 at C between the boat and station B between A and C at B). (A) 1 2) = (L2 1/L1 2) = K (B) t 2 = 360° - 1 2 (C) 2 = sin /(K + ) (D) All the above

Last Answer : (D) All the above

The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Description : The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Last Answer : (C) Requires more labour

Compare radiation and intersection methods of plane table surveying on any two parameters.

Description : Compare radiation and intersection methods of plane table surveying on any two parameters. 

Last Answer : Radiation method Intersection method 1. It requires the plane table to occupy a single station.  1. This method requires setting the table up at minimum of two stations.  ... for locating inaccessible points by the intersection of the rays drawn from two instruments stations. 

Write any four advantages of intersection method of plane tabling over radiation method of plane tabling.

Description : Write any four advantages of intersection method of plane tabling over radiation method of plane tabling.

Last Answer : Advantages of intersection method: 1. Interection method requires less ground distance measurement than radiation method. 2. By this method we can locate inaccessible points which cannot be ... to radiation method, intersection method eliminates undulation error, bisection error and plotting errors.

Which of the following stations was formerly known as Victoria Terminus? A. Churchgate Railway Station B. Mumbai Central C. Lokmanya Tilak Terminus D. Chhatrapathi Shivaji Terminus

Description : Which of the following stations was formerly known as Victoria Terminus? A. Churchgate Railway Station B. Mumbai Central C. Lokmanya Tilak Terminus D. Chhatrapathi Shivaji Terminus

Last Answer : D [Chhatrapathi Shivaji Terminus] Explanation: Chhatrapati Shivaji Maharaj Terminus, formerly known as Victoria Terminus, is a historic railway station and a UNESCO World Heritage Site in Mumbai, Maharashtra, India which serves as the headquarters of the Central Railways.

Which of the following stations was formerly known as Victoria Terminus? A. Churchgate Railway Station B. Mumbai Central C. Lokmanya Tilak Terminus D. Chhatrapathi Shivaji Terminus

Description : Which of the following stations was formerly known as Victoria Terminus? A. Churchgate Railway Station B. Mumbai Central C. Lokmanya Tilak Terminus D. Chhatrapathi Shivaji Terminus

Last Answer : D [Chhatrapathi Shivaji Terminus] Explanation: Chhatrapati Shivaji Maharaj Terminus, formerly known as Victoria Terminus, is a historic railway station and a UNESCO World Heritage Site in Mumbai, Maharashtra, India which serves as the headquarters of the Central Railways

In IEEE 802.11, a___ is made of stationary or mobile wireless stations and anoptional central base station, known as the access point (AP). A) ESS B) BSS C) CSS D) none of the above

Description : In IEEE 802.11, a___ is made of stationary or mobile wireless stations and anoptional central base station, known as the access point (AP). A) ESS B) BSS C) CSS D) none of the above

Last Answer : BSS

A satellite launch station should be a.107 dynes b.near the equatorial region c.all the locations are equally good d.one the polar axis e.near the polar region

Description : A satellite launch station should be a.107 dynes b.near the equatorial region c.all the locations are equally good d.one the polar axis e.near the polar region

Last Answer : b. near the equatorial region

Accurate measurement of deflection angles with a transit not properly adjusted may be made by (A) Setting the Vernier A at zero at back station and then plunging the telescope (B) Setting the Vernier A at zero at back station and turning the instrument to the forward station (C) Taking two back sights one with the telescope normal and the other with telescope inverted (D) None of these

Description : Accurate measurement of deflection angles with a transit not properly adjusted may be made by (A) Setting the Vernier A at zero at back station and then plunging the telescope (B) Setting the ... back sights one with the telescope normal and the other with telescope inverted (D) None of these

Last Answer : (C) Taking two back sights one with the telescope normal and the other with telescope inverted

An angle of deflection right, may be directly obtained by setting the instrument to read (A) Zero on back station (B) 180° on back station (C) 90° (D) 270° on back station

Description : An angle of deflection right, may be directly obtained by setting the instrument to read (A) Zero on back station (B) 180° on back station (C) 90° (D) 270° on back station

Last Answer : (A) Zero on back station

The purpose of a ‘satellite station’ in triangulation can be served by : (a) A ‘Church spire’ in order to secure a well- shaped triangle (b) A ‘Flag pole’ in order to secure a well- shaped triangle (c) A ‘Steeple’ in order to secure a well- shaped triangle (d) An ‘Eccentric station’ near the true station whereon the instrument cannot be setup

Description : The purpose of a satellite station' in triangulation can be served by : (a) A Church spire' in order to secure a well- shaped triangle (b) A Flag pole' in order to secure a well- ... a well- shaped triangle (d) An Eccentric station' near the true station whereon the instrument cannot be setup

Last Answer : (d) An ‘Eccentric station’ near the true station whereon the instrument cannot be setup

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Description : The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Last Answer : (B) Line of collimation

The line of intersection of two surfaces of a sloping roof forming an internal angle less than 180°, is known as (A) Ridge (B) Hip (C) Valley (D) None of these

Description : The line of intersection of two surfaces of a sloping roof forming an internal angle less than 180°, is known as (A) Ridge (B) Hip (C) Valley (D) None of these

Last Answer : Answer: Option C

I'm an object; good at drawing. I draws without using any drawing instrument, yet I can draw even better and faster than the world's best artist. But what I will draw won't stay permanent and what I draws may see me or not. What am I? -Riddles

Description : I'm an object; good at drawing. I draws without using any drawing instrument, yet I can draw even better and faster than the world's best artist. But what I will draw won't stay permanent and what I draws may see me or not. What am I? -Riddles

Last Answer : A mirror. Humans can see it but objects cannot.

What arrangements exit for the disposal of surplus collection at SO? a) By drawing to the treasury in the case of SO situated at treasury station b) By remittances to another SOc) By remittances to the HOd) All the above

Description : What arrangements exit for the disposal of surplus collection at SO? a) By drawing to the treasury in the case of SO situated at treasury station b) By remittances to another SO c) By remittances to the HO d) All the above

Last Answer : d) All the above

How are sub post offices kept in funds? a) By drawing from the treasury in the case of SO situated at treasury station b) By remittances from another SO c) By remittances from the HO d) All the above

Description : How are sub post offices kept in funds? a) By drawing from the treasury in the case of SO situated at treasury station b) By remittances from another SO c) By remittances from the HO d) All the above

Last Answer : d) All the above

What is the instrument for determining the nature of charge of an object ?

Last Answer : : An instrument for determining the nature of charge of an object is an ' electromechanical instrument ' .

Resistance measuring instrument particularly used in determining the insulation resistance

Description : Resistance measuring instrument particularly used in determining the insulation resistance

Last Answer : Megger/Megaohmmeter

In determining reasonable time for the purpose of payment of a negotiable instrument A. Public holidays are included B. Public holidays are excluded C. Only the holidays observed by the banks are excluded D. None of the above.

Description : In determining reasonable time for the purpose of payment of a negotiable instrument A. Public holidays are included B. Public holidays are excluded C. Only the holidays observed by the banks are excluded D. None of the above.

Last Answer : B. Public holidays are excluded

Mark incorrect correct option a) Trial card used for the purpose of determining the relative advantage of alternative mail routes or the cause of detention to articles b) Trial cards are red colour c) Trial card should not be included in any station bundle d) All of these

Description : Mark incorrect correct option a) Trial card used for the purpose of determining the relative advantage of alternative mail routes or the cause of detention to articles b) Trial cards are red colour c) Trial card should not be included in any station bundle d) All of these

Last Answer : d) All of these

The traveling salesman problem involves n cities with paths connecting the cities. The time taken for traversing through all the cities, without knowing in advance the length of a minimum tour, is ___________ a) O(n) b) O(n2) c) O(n!) d) O(n/2)

Description : The traveling salesman problem involves n cities with paths connecting the cities. The time taken for traversing through all the cities, without knowing in advance the length of a minimum tour, is ___________ a) O(n) b) O(n2) c) O(n!) d) O(n/2)

Last Answer : c) O(n!)

Draw sketch and explain method of traversing of plane table surveying.

Description : Draw sketch and explain method of traversing of plane table surveying. 

Last Answer : Procedure: 1.Set plane table over station A use plumbing fork for transferring station point from ground on sheet. Draw the direction of magnetic meridian with the help of compass. 2. With the ... scale Similarly, the table can be set at other successive station and traverse is completed.

Define : i) Traversing ii) Magnetic Meridian

Description : Define : i) Traversing ii) Magnetic Meridian

Last Answer : i) Traversing : Traversing is the series of survey lines connecting successive established traverse stations along the route of survey  ii) Magnetic Meridian : The direction indicated by ... and properly balanced Magnetic needle unaffected by local attractive force is called magnetic meridian.

Explain Procedure for chain and compass traversing.

Description : Explain Procedure for chain and compass traversing.

Last Answer : Chain and compass traversing : 1) Reconnaissance of the area to be surveyed is done. 2) Traverse stations are fixed. 3) The F.B and B.B of the traverse are measured by prismatic compass and ... occur when the traverse is plotted. 6) This error is adjusted graphically by using Bowditch Rule'. 

Compare theodolite traversing by included angle method with deflection angle method. Which one is suitable?

Description : Compare theodolite traversing by included angle method with deflection angle method. Which one is suitable?

Last Answer : Sr.No. Included angle method of traversing  Deflection angle method of traversing 1 This method is most suitable for closed traverse. This method is most suitable for open traverse. ... is suitable for long narrow strip like survey of roads, rivers, canals, railways, etc.

The runtime for traversing all the nodes of a binary search tree with n nodes and printing them in an order is (A) O(lg n) (B) O(n lg n) (C) O(n) (D) O(n2 )

Description : The runtime for traversing all the nodes of a binary search tree with n nodes and printing them in an order is (A) O(lg n) (B) O(n lg n) (C) O(n) (D) O(n2 ) 

Last Answer : (C) O(n) 

______ involves traversing the entire file system, marking everything that can be accessed. (1) Index pointer (2) Garbage collection (3) File system (4) Stack pointer

Description : ______ involves traversing the entire file system, marking everything that can be accessed. (1) Index pointer (2) Garbage collection (3) File system (4) Stack pointer

Last Answer : Garbage collection