The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

The resection by two point problem as compared to three point problem
(A) Gives more accurate problem
(B) Takes less time
(C) Requires more labour
(D) None of the above
by

1 Answer

Answer :

(C) Requires more labour
by

Related questions

As compared to wall type breakwater, mound type breakwater (A) Requires skilled labour (B) Requires low maintenance cost (C) Requires less material (D) Results in less damage due to gradual failure

Description : As compared to wall type breakwater, mound type breakwater (A) Requires skilled labour (B) Requires low maintenance cost (C) Requires less material (D) Results in less damage due to gradual failure

Last Answer : (D) Results in less damage due to gradual failure

Which one of the following procedures for getting accurate orientation is the most distinctive feature of the art of plane tabling? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Description : Which one of the following procedures for getting accurate orientation is the most distinctive feature of the art of plane tabling? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Last Answer : (D) Resection

The two point problem and three point problem are methods of (A) Resection (B) Orientation (C) Traversing (D) Resection and orientation

Description : The two point problem and three point problem are methods of (A) Resection (B) Orientation (C) Traversing (D) Resection and orientation

Last Answer : (D) Resection and orientation

Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Description : Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Last Answer : (D) Three point problem

Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Description : Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Last Answer : (B) Takes 2-3 days for coking of coal but requires no external fuel for heating

Advantage of a clamp compared to a kiln for burning bricks is that (A) It takes less time for burning (B) It gives more output of first class bricks (C) It has less initial cost (D) It is suitable when bricks are required in large numbers

Description : Advantage of a clamp compared to a kiln for burning bricks is that (A) It takes less time for burning (B) It gives more output of first class bricks (C) It has less initial cost (D) It is suitable when bricks are required in large numbers

Last Answer : Answer: Option C

To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Description : To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Last Answer : (D) Two point problem

Wet grinding in a revolving mill __________ as compared to dry grinding. (A) Gives less wear on chamber walls (B) Requires more energy (C) Increases capacity (D) Complicates handling of the product

Description : Wet grinding in a revolving mill __________ as compared to dry grinding. (A) Gives less wear on chamber walls (B) Requires more energy (C) Increases capacity (D) Complicates handling of the product

Last Answer : (C) Increases capacity

A thermal nuclear reactor compared to a fast breeder reactor (A) Uses slower neutrons for fission (B) Uses faster neutrons for fission (C) Gives higher power density (D) Requires less fuel to run at the same power level

Description : A thermal nuclear reactor compared to a fast breeder reactor (A) Uses slower neutrons for fission (B) Uses faster neutrons for fission (C) Gives higher power density (D) Requires less fuel to run at the same power level

Last Answer : (A) Uses slower neutrons for fission

The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error such that each ray is equally rotated either clockwise or anti clockwise 5. The points obtained by three rays are the correct location. The correct sequence is (A) 1, 3, 2, 4, 5 (B) 1, 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Description : The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error ... 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Last Answer : (A) 1, 3, 2, 4, 5

As compared to gravity dams, earthen dams (A) Are costlier (B) Are less susceptible to failure (C) Require sound rock foundations (D) Require less skilled labour

Description : As compared to gravity dams, earthen dams (A) Are costlier (B) Are less susceptible to failure (C) Require sound rock foundations (D) Require less skilled labour

Last Answer : Answer: Option D

Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of vaporisation is constant (C) Volume in the liquid state is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Description : Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of ... is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Description : Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Last Answer : (B) Intersection

In High volume spray the dilute liquids are applied by machine requires b. b less time and labour c. c. Less time and more labour d. d. None of above

Description : In High volume spray the dilute liquids are applied by machine requires b. b less time and labour c. c. Less time and more labour d. d. None of above

Last Answer : Ans- a. more time and labour.  

Which of the following is NOT characteristic of a nursing research? a. Development of theories, principles, and generalizations b. Uses chaotic method of problem-solving c. Requires full skill of writing report d. Involves precise observation and accurate description

Description : Which of the following is NOT characteristic of a nursing research? a. Development of theories, principles, and generalizations b. Uses chaotic method of problem-solving c. Requires full skill of writing report d. Involves precise observation and accurate description

Last Answer : b. Uses chaotic method of problem-solving

Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate or larger amounts of data (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order (D) The ratio of volumes of plug flow reactor to that of mixed reactor is always less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Description : Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate ... less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Last Answer : (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order

Which one of the following statements about dextromethorphan is accurate? (a) Activates kappa receptors (b) Analgesia equivalent to pentazocine (c) Highly effective antiemetic (d) Less constipation than codeine (e) Use requires a prescription

Description : Which one of the following statements about dextromethorphan is accurate? (a) Activates kappa receptors (b) Analgesia equivalent to pentazocine (c) Highly effective antiemetic (d) Less constipation than codeine (e) Use requires a prescription

Last Answer : Ans: D

The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Description : The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Last Answer : (D) Yielding point

The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Description : The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Last Answer : (C) (ii) and (iv)

The process of determining the locations of the instrument station by drawing re sectors from the locations of the known stations is (A) Radiation (B) Intersection (C) Resection (D) Traversing

Description : The process of determining the locations of the instrument station by drawing re sectors from the locations of the known stations is (A) Radiation (B) Intersection (C) Resection (D) Traversing

Last Answer : (C) Resection

Detailed plotting is generally done by (A) Radiation (B) Traversing (C) Resection (D) All of the above

Description : Detailed plotting is generally done by (A) Radiation (B) Traversing (C) Resection (D) All of the above

Last Answer : (A) Radiation

In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Description : In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Last Answer : (b) Resection

For locating an inaccessible point with the help of only a plane table, one should use (a) traversing (b) resection (c) radiation (e) Intersection*

Description : For locating an inaccessible point with the help of only a plane table, one should use (a) traversing (b) resection (c) radiation (e) Intersection*

Last Answer : (e) Intersection*

In case of a revolving mill, wet grinding compared to dry grinding (A) Requires more energy (B) Has less capacity (C) Complicates handling & classification of the product (D) None of these

Description : In case of a revolving mill, wet grinding compared to dry grinding (A) Requires more energy (B) Has less capacity (C) Complicates handling & classification of the product (D) None of these

Last Answer : (D) None of these

A concentric double pipe heat exchanger as compared to the shell and tube heat exchanger for the same heat load requires (A) Less heating surface (B) More space (C) Lower maintenance cost (D) None of these

Description : A concentric double pipe heat exchanger as compared to the shell and tube heat exchanger for the same heat load requires (A) Less heating surface (B) More space (C) Lower maintenance cost (D) None of these

Last Answer : (B) More space

A coal having high ratio of volatile matter to fixed carbon as compared to a coal having low ratio of volatile matter to fixed carbon (A) Is less liable to spontaneous combustion on storage (B) Is more difficult to ignite and produces a shorter flame (C) Requires smaller combustion space and less secondary air (D) None of these

Description : A coal having high ratio of volatile matter to fixed carbon as compared to a coal having low ratio of volatile matter to fixed carbon (A) Is less liable to spontaneous combustion on storage (B) ... a shorter flame (C) Requires smaller combustion space and less secondary air (D) None of these

Last Answer : (D) None of these

Diaphragm electrolytic cell as compared to mercury electrolytic cell (A) Produces 70% NaOH solution (B) Requires less specific power consumption for the production of chlorine (C) Requires lesser investment for similar capacity (D) All (A), (B) and (C)

Description : Diaphragm electrolytic cell as compared to mercury electrolytic cell (A) Produces 70% NaOH solution (B) Requires less specific power consumption for the production of chlorine (C) Requires lesser investment for similar capacity (D) All (A), (B) and (C)

Last Answer : (C) Requires lesser investment for similar capacity

Is it more profitable for Company M to produce Q? I. Product R sells at a price four times that of Q II. One unit of Q requires 2 units of labour, while one unit of R requires 5 units of labour. There is a no other constraint on production. If the question can be answered with the help of statement I alone, If the question can be answered with the help of statement II alone, If both,statement I and statement II are needed to answer the question If the question cannot be answered even with the help of both the statements. If the data in either statement I or statement II alone is sufficient to answer the question

Description : Is it more profitable for Company M to produce Q? I. Product R sells at a price four times that of Q II. One unit of Q requires 2 units of labour, while one unit of R requires 5 ... both the statements. If the data in either statement I or statement II alone is sufficient to answer the question

Last Answer : from statement I : Let the price of product Q be P' Then the price of product R is 4P From Statement II: Cost of product Q =2 Cost of product R=5 Therefore, Profit percentage of product ... )=80P-100 Hence, product R is more profitable. Both statements are required to answer the question Answer :c

Is it more profitable for Company M to produce Q? I. Product R sells at a price four times that of Q II. One unit of Q requires 2 units of labour, while one unit of R requires 5 units of labour. There is a no other constraint on production. If the question can be answered with the help of statement I alone, If the question can be answered with the help of statement II alone, If both,statement I and statement II are needed to answer the question If the question cannot be answered even with the help of both the statements. If the data in either statement I or statement II alone is sufficient to answer the question

Description : Is it more profitable for Company M to produce Q? I. Product R sells at a price four times that of Q II. One unit of Q requires 2 units of labour, while one unit of R requires 5 ... both the statements. If the data in either statement I or statement II alone is sufficient to answer the question

Last Answer : from statement I : Let the price of product Q be P' Then the price of product R is 4P From Statement II: Cost of product Q =2 Cost of product R=5 Therefore, Profit percentage of product ... )=80P-100 Hence, product R is more profitable. Both statements are required to answer the question Answer :c

CG Co manufactures a single product T. Budgeted production output of product T during June is 200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per cent idle time. Labour is paid at a rate of Rs7 per hour. The direct labour cost budget for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Description : CG Co manufactures a single product T. Budgeted production output of product T during June is  200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per  cent idle time. Labour is paid at ... for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Last Answer : (d) 10,500

In the process of transcription in bacterial cells (A) Initiation requires rho protein (B) RNA polymerase incorporates methylated bases in correct sequence (C) Both the sigma unit and core enzymes of RNA polymerase are required for accurate promotor site binding (D) Primase is necessary for initiation

Description : In the process of transcription in bacterial cells (A) Initiation requires rho protein (B) RNA polymerase incorporates methylated bases in correct sequence (C) Both the sigma unit and core ... RNA polymerase are required for accurate promotor site binding (D) Primase is necessary for initiation

Last Answer : Answer : C

What type of ranging circuit is most often used with a radar that requires extremely accurate range data?

Description : What type of ranging circuit is most often used with a radar that requires extremely accurate range data?

Last Answer : Range gate or range step.

A pull system a) Requires Requires high levels of levels of finished goods finished goods inventory inventory b) Relies heavily on accurate Relies heavily on accurate sales forecasts sales forecasts c) Waits for customer orders d) Necessitates Necessitates standardized standardized products

Description : A pull system a) Requires Requires high levels of levels of finished goods finished goods inventory inventory b) Relies heavily on accurate Relies heavily on accurate sales forecasts sales forecasts c) Waits for customer orders d) Necessitates Necessitates standardized standardized products

Last Answer : c) Waits for customer orders

While determining the workability of concrete mix, the compaction factor test is ------than the slump cone test [ A ] Less accurate [ B ] More accurate [ C ] Approximate method [ D ] None of the above

Description : While determining the workability of concrete mix, the compaction factor test is ------than the slump cone test [ A ] Less accurate [ B ] More accurate [ C ] Approximate method [ D ] None of the above

Last Answer : [ B ] More accurate

Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ions and forms amino acids(B) Calcium present in the fertiliser helps in correcting the soil acidity(C) Particle size range of a good granular fertiliser is 10-15 mesh and itcontains less moisture as compared to finely divided powder form of fertiliser(D) Ammonium nitrate fertiliser is obtained as a by-product in an integratedsteel plant having by-product coke ovens

Description : Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ... nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Last Answer : (D) Ammonium nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

The stress at which extension of the material takes place more rapidly as compared to the increase in load is termed as the __________ point of the material. (A) Elastic (B) Ultimate (C) Yielding (D) Breaking

Description : The stress at which extension of the material takes place more rapidly as compared to the increase in load is termed as the __________ point of the material. (A) Elastic (B) Ultimate (C) Yielding (D) Breaking

Last Answer : (C) Yielding

The stress at which extension of a material takes place more quickly as compared to increase in load, is called (a) No elastic zone (b) Plastic point (c) Yield point (d) Breaking point

Description : The stress at which extension of a material takes place more quickly as compared to increase in load, is called (a) No elastic zone (b) Plastic point (c) Yield point (d) Breaking point

Last Answer : (c) Yield point

Which one of the following parameters is accurate for DGPS? (A) Positional accuracies ~ 1 - 2 m if rover is less than 1-2 km from the reference station (B) Positional accuracies ~ 2 - 5m if rover is less than 2-5 fm from the reference station (C) Positional accuracies ~ 5 - 10 m if rover is less than 5-10 km from reference station (D) Positional accuracies ~ 5 - 10 m if rover is less than 25 km

Description : Which one of the following parameters is accurate for DGPS? (A) Positional accuracies ~ 1 - 2 m if rover is less than 1-2 km from the reference station (B) Positional accuracies ~ 2 - 5m if rover is ... -10 km from reference station (D) Positional accuracies ~ 5 - 10 m if rover is less than 25 km

Last Answer : Answer: Option A

In general, chest drainage tubes are not used for the patient undergoing a) Pneumonectomy Usually, no drains are used for the pneumonectomy patient because the accumulation of fluid in the empty hemithorax prevents mediastinal shift. b) Lobectomy With lobectomy, two chest tubes are usually inserted for drainage, the upper for air and the lower for fluid c) Wedge resection With wedge resection, the pleural cavity usually is drained because of the possibility of an air or blood leak d) Segmentectomy With segmentectomy, drains are usually used because of the possibility of an air or blood leak.

Description : In general, chest drainage tubes are not used for the patient undergoing a) Pneumonectomy Usually, no drains are used for the pneumonectomy patient because the accumulation of fluid in the empty ... With segmentectomy, drains are usually used because of the possibility of an air or blood leak.

Last Answer : a) Pneumonectomy Usually, no drains are used for the pneumonectomy patient because the accumulation of fluid in the empty hemithorax prevents mediastinal shift.

What are your stats from this website? Are they accurate compared to real life?

Description : What are your stats from this website? Are they accurate compared to real life?

Last Answer : RedDeerGuy1 Having an Intelligence of 9 might explain why I don’t get high marks in high school chemistry and physics.

What is the CPT code for radical resection of a 2.7 cm sarcoma of the soft tissue of the upper back?

Description : What is the CPT code for radical resection of a 2.7 cm sarcoma of the soft tissue of the upper back?

Last Answer : Feel Free to Answer

Small bowel resection?

Description : Small bowel resection?

Last Answer : DefinitionSmall bowel resection is surgery to remove part or all of your small bowel. It is done when part of your small bowel is blocked or diseased.The small bowel is also called the small intestine. ... instruments through these cuts.You may also have a cut of about 2 to 3 inches if your surge

Large bowel resection?

Description : Large bowel resection?

Last Answer : DefinitionLarge bowel resection is surgery to remove all or part of your large bowel. This surgery is also called colectomy. Removal of the entire colon and rectum is called a ... - partial; Abdominal perineal resectionDescriptionYou will receive general anesthesia right before your surgery. This

What happens during a bowel resection?

Description : What happens during a bowel resection?

Last Answer : During this procedure one or more segments of the small intestine are removed. This procedure may be performed if you have Cancer, Crohn's disease or Ulcers.

Wounds are classified according to the likelihood of bacterial contamination. Which of the following statement(s) is/are true concerning wound classifications? a. A clean-contaminated wound would be that associated with an elective colon resection with adequate mechanical and antibiotic bowel preparation b. A contaminated wound would include a resection of obstructed bowel with gross spillage of intestinal contents c. In a clean wound, no viscus is entered d. Antibiotic prophylaxis should be administered for all clean-contaminated and contaminated wounds and selectively in patients involving a clean wound

Description : Wounds are classified according to the likelihood of bacterial contamination. Which of the following statement(s) is/are true concerning wound classifications? a. A clean-contaminated wound would ... all clean-contaminated and contaminated wounds and selectively in patients involving a clean wound

Last Answer : Answer: a, b, c, d Wounds are classified under three classes according to the likelihood of bacterial contamination: 1) clean (no viscus is entered; e.g., herniorrhaphy); 2) clean- ... tenet involves cases in which a prosthetic material may be used (artificial joint, heart valve, tissue patch)

If a necrotizing soft tissue infection is considered, therapy mandates: a. Empiric administration of antibiotics active against gram-positive, gram-negative, and anaerobic bacteria b. Due to usually resistant species, penicillin is not indicated c. Immediate operative intervention and aggressive resection of all involved tissues is mandatory d. The use of hyperbaric oxygen has been demonstrated to be clearly advantageous

Description : If a necrotizing soft tissue infection is considered, therapy mandates: a. Empiric administration of antibiotics active against gram-positive, gram-negative, and anaerobic bacteria b. Due to usually ... is mandatory d. The use of hyperbaric oxygen has been demonstrated to be clearly advantageous

Last Answer : Answer: a, c Identification of a necrotizing, soft tissue infection mandates immediate operative intervention with aggressive resection of all involved tissues and empiric ... remains without controlled trials demonstrating any additional benefits derived from hyperbaric oxygen therapy

A number of prospective clinical trials have addressed the role of total parenteral nutrition in the cancer patient. The results have been somewhat conflicting. Which of the following statement(s) have been proven correct by prospective trials? a. Preoperative TPN is beneficial in surgical patients with severe preoperative nutrition b. Postoperative TPN is of value following pancreatic resection c. Routine use of perioperative (including prior to the procedure) TPN is of benefit in patients undergoing hepatectomy for hepatoma d. TPN is of no benefit in patients undergoing bone marrow transplant

Description : A number of prospective clinical trials have addressed the role of total parenteral nutrition in the cancer patient. The results have been somewhat conflicting. Which of the following statement(s) ... hepatectomy for hepatoma d. TPN is of no benefit in patients undergoing bone marrow transplant

Last Answer : Answer: a, c Numerous clinical trials have failed to yield a consensus with regard to the efficacy of TPN in cancer patients. In 1991, a multicenter VA cooperative trial demonstrated ... patients receiving bone marrow transplantation has also been shown to be a valuable component of overall care

Rank the following laboratory tests and procedures in terms of their relative value to a 65-year-old woman who is to undergo elective resection of a sigmoid cancer. A. Carcinoembryonic antigen (CEA). B. Blood urea nitrogen (BUN). C. Electrocardiogram (ECG). D. Hemoglobin concentration (Hgb). E. Serum creatinine (Cr). F. Arterial blood oxygen tension (PaO 2) on room air. G. Serum sodium concentration (Na+).

Description : Rank the following laboratory tests and procedures in terms of their relative value to a 65-year-old woman who is to undergo elective resection of a sigmoid cancer. A. Carcinoembryonic antigen (CEA). B. ... Arterial blood oxygen tension (PaO 2) on room air. G. Serum sodium concentration (Na+).

Last Answer : Answer: CDFEBAG DISCUSSION: The most important test by far is the electrocardiogram, with its capacity to indicate signs of occult heart disease. The second most important evaluation is the hemoglobin ... for resection of the colon is always normal and would be of least value among these tests

77. Nurse Kristine is to inject Demerol 75 mg to a post-TURP (transurethral resection of the prostate) client who is in pain. When she checked the narcotic cabinet, she found out a vial that is almost empty. She was able to aspirate 60 mg only. Nurse Kristine decided to inject it instead of making the client wait until the next Demerol vial is available. The action of the nurse violates which of the following ethical principles?

Description : 77. Nurse Kristine is to inject Demerol 75 mg to a post-TURP (transurethral resection of the prostate) client who is in pain. When she checked the narcotic cabinet, she found out a ... next Demerol vial is available. The action of the nurse violates which of the following ethical principles?

Last Answer : A. Justice