Probable systematic error in precise levelling as recommended by International Geodetic Association should not exceed (where is in kilometers.) (A) ± 0.1 k mm (B) ± 0.2 k mm (C) ± 0.1 k (D) 0.2 k mm

Probable systematic error in precise levelling as recommended by International Geodetic
Association should not exceed (where is in kilometers.)
(A) ± 0.1 k mm
(B) ± 0.2 k mm
(C) ± 0.1 k
(D) 0.2 k mm
by

1 Answer

Answer :

(D) 0.2 k mm
by

Related questions

Probable accidental error in precise levelling as recommended by International Geodetic Association should not exceed (where k is in kilometers.) (A) ± 0.1 k mm (B) ± 0.5 k mm (C) ± 1 k mm (D) ± 5 k mm

Description : Probable accidental error in precise levelling as recommended by International Geodetic Association should not exceed (where k is in kilometers.) (A) ± 0.1 k mm (B) ± 0.5 k mm (C) ± 1 k mm (D) ± 5 k mm

Last Answer : (C) ± 1 k mm

The method of finding out the difference in elevation between two points for eliminating the effect of curvature and refraction, is (A) Reciprocal levelling (B) Precise levelling (C) Differential levelling (D) Flying levelling

Description : The method of finding out the difference in elevation between two points for eliminating the  effect of curvature and refraction, is  (A) Reciprocal levelling  (B) Precise levelling  (C) Differential levelling  (D) Flying levelling 

Last Answer : (A) Reciprocal levelling 

In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs) (A) 50" n(B) 30" n(C) 60" n (D) None of these

Description : In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per ... legs) (A) 50" n (B) 30" n (C) 60" n (D) None of these

Last Answer : (A) 50" n

The 10 mm markings on a levelling staff placed at 20 m are separated by (A) 1/1000 radian (B) 1/1500 radian (C) 1/2000 radian (D) 1/2500 radian

Description : The 10 mm markings on a levelling staff placed at 20 m are separated by (A) 1/1000 radian (B) 1/1500 radian (C) 1/2000 radian (D) 1/2500 radian

Last Answer : (C) 1/2000 radian

In reciprocal levelling, the error which is not completely eliminated, is due to (A) Earth's curvature (B) Non-adjustment of line of collimation (C) Refraction (D) Non-adjustment of the bubble tube

Description : In reciprocal levelling, the error which is not completely eliminated, is due to  (A) Earth's curvature  (B) Non-adjustment of line of collimation  (C) Refraction  (D) Non-adjustment of the bubble tube 

Last Answer : (C) Refraction 

In horizontal angles, the error due to imperfect levelling of the plate bubble is (A) Large when sights are nearly level (B) Large for long sights (C) Less for steeply inclined sights (D) Large for steeply inclined sights

Description : In horizontal angles, the error due to imperfect levelling of the plate bubble is (A) Large when sights are nearly level (B) Large for long sights (C) Less for steeply inclined sights (D) Large for steeply inclined sights

Last Answer : (D) Large for steeply inclined sights

Which of the following statements is incorrect? (A) Error due to refraction may not be completely eliminated by reciprocal levelling (B) Tilting levels are commonly used for precision work (C) The last reading of levelling is always a foresight (D) All of the above statements are incorrect

Description : Which of the following statements is incorrect? (A) Error due to refraction may not be completely eliminated by reciprocal levelling (B) Tilting levels are commonly used for precision work (C) The last reading of levelling is always a foresight (D) All of the above statements are incorrect

Last Answer : (D) All of the above statements are incorrect

A load of 1960 N is raised at the end of a steel wire. The minimum diameter of the wire so that stress in the wire does not exceed 100 N/mm2 is: (A) 4.0 mm (B) 4.5 mm (C) 5.0 mm (D) 5.5 mm

Description : A load of 1960 N is raised at the end of a steel wire. The minimum diameter of the wire so that  stress in the wire does not exceed 100 N/mm2  is:  (A) 4.0 mm  (B) 4.5 mm  (C) 5.0 mm  (D) 5.5 mm

Last Answer : (C) 5.0 mm 

Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of column should not exceed 300 mm (C) Reinforcing bars in a column should not be less than 12 mm in diameter (D) The number of longitudinal bars provided in a circular column should not be less than four

Description : Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of ... (D) The number of longitudinal bars provided in a circular column should not be less than four

Last Answer : Answer: Option D

Select the incorrect statement from the following [ A ] Reinforcing bars in a column should not be less than 12 mm in diameter [ B ] The number of longitudinal bars in a circular column should not exceed four [ C ] The minimum percentage of longitudinal steel in columns should be 0.8% [ D ] None of the above

Description : Select the incorrect statement from the following [ A ] Reinforcing bars in a column should not be less than 12 mm in diameter [ B ] The number of longitudinal bars in a circular column should not ... The minimum percentage of longitudinal steel in columns should be 0.8% [ D ] None of the above

Last Answer : [ B ] The number of longitudinal bars in a circular column should not exceed four

In “Severe exposure” the allowable crack width at the surface of concrete should not exceed [ A ] 0.1 mm [ B ] 0.2 mm [ C ] 0.3 mm [ D ] 0.4 mm

Description : In “Severe exposure” the allowable crack width at the surface of concrete should not exceed [ A ] 0.1 mm [ B ] 0.2 mm [ C ] 0.3 mm [ D ] 0.4 mm

Last Answer : [ A ] 0.1 mm

Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of offset should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Description : Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of ... should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Last Answer : (B) 28.28 m

Geodetic surveying is undertaken (A) For production of accurate maps of wide areas (B) For developing the science of geodesy (C) Making use of most accurate instruments and methods of observation (D) All the above

Description : Geodetic surveying is undertaken  (A) For production of accurate maps of wide areas  (B) For developing the science of geodesy  (C) Making use of most accurate instruments and methods of observation  (D) All the above 

Last Answer : (D) All the above 

Surveys which are carried out to provide a national grid of control for preparation of accurate maps of large areas are known (A) Plane surveys (B) Geodetic surveys (C) Geographical surveys (D) Topographical surveys

Description : Surveys which are carried out to provide a national grid of control for preparation of accurate  maps of large areas are known  (A) Plane surveys  (B) Geodetic surveys  (C) Geographical surveys  (D) Topographical surveys

Last Answer : (B) Geodetic surveys 

In geodetic surveys higher accuracy is achieved, if (A) Curvature of the earth surface is ignored (B) Curvature of the earth surface is taken into account (C) Angles between the curved lines are treated as plane angles (D) None of these

Description : In geodetic surveys higher accuracy is achieved, if (A) Curvature of the earth surface is ignored (B) Curvature of the earth surface is taken into account (C) Angles between the curved lines are treated as plane angles (D) None of these

Last Answer : (B) Curvature of the earth surface is taken into account

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net ... load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Last Answer : Answer: Option D

For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Description : For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Last Answer : (C) Initial setting time is not less than 30 minutes

The size of fine aggregates does not exceed (A) 2.75 mm (B) 3.00 mm (C) 3.75 mm (D) 4.75 mm

Description : The size of fine aggregates does not exceed (A) 2.75 mm (B) 3.00 mm (C) 3.75 mm (D) 4.75 mm

Last Answer : Answer: Option D

The type of ashlar masonry in which stones are finely chisel dressed and thickness of joints does not exceed 3 mm, is (A) Chamfered ashlar masonry (B) Ashlar facing masonry (C) Random coursed ashlar masonry (D) Coursed ashlar masonry

Description : The type of ashlar masonry in which stones are finely chisel dressed and thickness of joints does not exceed 3 mm, is (A) Chamfered ashlar masonry (B) Ashlar facing masonry (C) Random coursed ashlar masonry (D) Coursed ashlar masonry

Last Answer : Answer: Option D

The differential settlement in case of foundations on sandy soils should not exceed (A) 25 mm (B) 40 mm (C) 65 mm (D) 100 m

Description : The differential settlement in case of foundations on sandy soils should not exceed (A) 25 mm (B) 40 mm (C) 65 mm (D) 100 mm

Last Answer : Answer: Option A

The Pitch of helixes in circular columns shall not exceed [ A ] 25 mm [ B ] 50 mm [ C ] 60 mm [ D ] 75 mm

Description : The Pitch of helixes in circular columns shall not exceed [ A ] 25 mm [ B ] 50 mm [ C ] 60 mm [ D ] 75 mm

Last Answer : [ D ] 75 mm

In slabs the Maximum horizontal distance between parallel main reinforcement should not exceed i.Three times effective depth ii Five times effective depth iii 300mm iv 450 mm [ A ] i and iii [ B ] i and iv [ C ] ii and iii [ D ] ii and iv

Description : In slabs the Maximum horizontal distance between parallel main reinforcement should not exceed i.Three times effective depth ii Five times effective depth iii 300mm iv 450 mm [ A ] i and iii [ B ] i and iv [ C ] ii and iii [ D ] ii and iv

Last Answer : [ A ] i and iii

According to IS: 456-2000 Maximum spacing of shear reinforcement in no case shall not exceed [ A ] 250 mm [ B ] 300 mm [ C ] 350 mm [ D ] 450 mm

Description : According to IS: 456-2000 Maximum spacing of shear reinforcement in no case shall not exceed [ A ] 250 mm [ B ] 300 mm [ C ] 350 mm [ D ] 450 mm

Last Answer : [ B ] 300 mm

The maximum of spacing of side face reinforcement shall not exceed [ A ] 300 mm [ B ] Web thickness [ C ] Lesser of (a) and (b) [ D ] Greater of (a) and (b)

Description : The maximum of spacing of side face reinforcement shall not exceed [ A ] 300 mm [ B ] Web thickness [ C ] Lesser of (a) and (b) [ D ] Greater of (a) and (b)

Last Answer : [ C ] Lesser of (a) and (b)

The size of fine aggregates does not exceed [ A ] 2.75 mm [ B ] 3.75 mm [ C ] 4.75 mm [ D ] 5.75 mm

Description : The size of fine aggregates does not exceed [ A ] 2.75 mm [ B ] 3.75 mm [ C ] 4.75 mm [ D ] 5.75 mm

Last Answer : [ C ] 4.75 mm

Which of the following is NOT associated with learning organizations or knowledge management? (a) COIN ; (b) A recommended response to a rapidly changing world (c) Systematic gathering and sharing of useful information. (d) PSTN

Description : Which of the following is NOT associated with learning organizations or knowledge management? (a) COIN ; (b) A recommended response to a rapidly changing world (c) Systematic gathering and sharing of useful information. (d) PSTN

Last Answer : (d) PSTN

Of the following statements, which best distinguishes ordinary negligence from gross negligence? a. The more material the undetected error the greater the likelihood of ordinary negligence. b. Gross negligence is most probable when the auditor fails to detect errors that occurred under conditions of strong internal control. c. Failure to detect material errors, whether internal control is strong or weak, suggests gross negligence. d. Failure to exercise reasonable care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence

Description : Of the following statements, which best distinguishes ordinary negligence from gross negligence? a. The more material the undetected error the greater the likelihood of ordinary negligence. ... care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence

Last Answer : Failure to exercise reasonable care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence

The multi-track tape recorder in your computer system has a fixed skew error. What does this mean and what is the probable cause?

Description : The multi-track tape recorder in your computer system has a fixed skew error. What does this mean and what is the probable cause?

Last Answer : Skew means there are time differences between the individual tracks of a multi-track recorder’s magnetic head. It happens when the tape isn’t properly aligned with the head. Fixed skew happens when the tape passes over an improperly aligned magnetic head.

Which of the following introduces an error of about 1 in 1000 if 20 m chain is used? (A) Length of chain 20 mm wrong (B) One end of the chain 0.9 m off the line (C) One end of chain 0.9 m higher than the other (D) All the above

Description : Which of the following introduces an error of about 1 in 1000 if 20 m chain is used? (A) Length of chain 20 mm wrong (B) One end of the chain 0.9 m off the line (C) One end of chain 0.9 m higher than the other (D) All the above

Last Answer : (D) All the above

For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Description : For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Last Answer : Answer: Option D

The diameter of a domestic sewer pipe laid at gradient 1 in 100 is recommended (A) 100 mm (B) 150 mm (C) 200 mm (D) 175 mm

Description : The diameter of a domestic sewer pipe laid at gradient 1 in 100 is recommended (A) 100 mm (B) 150 mm (C) 200 mm (D) 175 mm

Last Answer : (B) 150 mm

The slump recommended for mass concrete is about (A) 25 mm to 50 mm (B) 50 mm to 100 mm (C) 100 mm to 125 mm (D) 125 mm to 150 mm

Description : The slump recommended for mass concrete is about (A) 25 mm to 50 mm (B) 50 mm to 100 mm (C) 100 mm to 125 mm (D) 125 mm to 150 mm

Last Answer : Answer: Option A

The concrete slump recommended for beams and slabs; is (A) 25 to 50 mm (B) 25 to 75 mm (C) 30 to 125 mm (D) 50 to 100 mm

Description : The concrete slump recommended for beams and slabs; is (A) 25 to 50 mm (B) 25 to 75 mm (C) 30 to 125 mm (D) 50 to 100 mm

Last Answer : Answer: Option C

The concrete slump recommended for columns, is (A) 25 to 50 mm (B) 25 to 75 mm (C) 75 to 125 mm (D) 50 to 100

Description : The concrete slump recommended for columns, is (A) 25 to 50 mm (B) 25 to 75 mm (C) 75 to 125 mm (D) 50 to 100 mm

Last Answer : Answer: Option C

The concrete slump recommended for foundations, is (A) 25 to 50 mm (B) 30 to 125 mm (C) 50 to 100 mm (D) 75 to 125 mm

Description : The concrete slump recommended for foundations, is (A) 25 to 50 mm (B) 30 to 125 mm (C) 50 to 100 mm (D) 75 to 125 mm

Last Answer : Answer: Option C

Explain why a systematic error can’t be corrected for by taking the mean of many readings.?

Description : Explain why a systematic error can’t be corrected for by taking the mean of many readings.?

Last Answer : I don't understand the relevance of the image to the question. However, your basic idea seems to be close to the correct idea. A systematic error is in contrast to random ... actual value should be. This is why scientists must account for their estimated error using various statistical tools

What is systematic error? Classify errors into different categories.

Description : What is systematic error? Classify errors into different categories.

Last Answer : What is systematic error? Classify errors into different categories.

Explain gross error, systematic error and random error.

Description : Explain gross error, systematic error and random error.

Last Answer : 1) Gross Errors -These errors occur due to human mistakes while taking reading, handling instrument, incorrect setting or adjustment and improper used of instrument. The complete elimination of gross ... remain since the systematic and gross error are removed. Generally these errors are very small.

Which of the following phrases is not relevant to describe the meaning of research as a process? (A) Systematic Activity (B) Objective Observation (C) Trial and Error (D) Problem Solving

Description : Which of the following phrases is not relevant to describe the meaning of research as a process? (A) Systematic Activity (B) Objective Observation (C) Trial and Error (D) Problem Solving 

Last Answer : (B) Objective Observation

Define plane survey and geodetic survey.

Description : Define plane survey and geodetic survey.

Last Answer : Plane survey: The survey in which curvature of the earth is not taken in to consideration is called as plane survey.  Geodetic survey: The survey in which curvature of the earth is taken in to consideration is called as geodetic survey.

State the two uses of survey based on geodetic surveying

Description : State the two uses of survey based on geodetic surveying

Last Answer : Two uses of survey based on geodetic surveying:- i) To determine the precise position s on the surface of the earth. ii) Preparation of maps of large area like map of a country, state ... ) Establishment of GTS bench Marks across the country. iv) Preparation of military maps for defense purposes.

Differentiate between plane and geodetic survey on any four points.

Description : Differentiate between plane and geodetic survey on any four points. 

Last Answer : Difference between Plane Surveying and Geodetic Surveying Points Plane Surveying Geodetic Surveying Definition Plane surveying is that type of surveying in which mean surface of ... Traditional survey equipment is used Precise and modern survey equipment are required

Determining the sample interval (represented by k), randomly selecting a number between 1 and k, and including each kth element in your sample are the steps for which form of sampling? a. Simple Random Sampling b. Stratified Random Sampling c. Systematic Sampling d. Cluster sampling

Description : Determining the sample interval (represented by k), randomly selecting a number between 1 and k, and including each kth element in your sample are the steps for which form of sampling? a. Simple Random Sampling b. Stratified Random Sampling c. Systematic Sampling d. Cluster sampling

Last Answer : c. Systematic Sampling

Which of the following statements is incorrect regarding a normal project? A. If the NPV of a project is greater than 0, then its PI will exceed 1. B. If the IRR of a project is 8%, its NPV, using a discount rate, k, greater than 8%, will be less than 0.C. If the PI of a project equals 0, then the project's initial cash outflow equals the PV of its cash flows. D. If the IRR of a project is greater than the discount rate, k, then its PI will be greater than 1.

Description : Which of the following statements is incorrect regarding a normal project? A. If the NPV of a project is greater than 0, then its PI will exceed 1. B. If the IRR of a project is 8%, its NPV, using ... the IRR of a project is greater than the discount rate, k, then its PI will be greater than 1.

Last Answer : D. If the IRR of a project is greater than the discount rate, k, then its PI will be greater than 1.

A beam 3m long simply supported at its ends ,is carrying a point load W at the centre.If the slope at the ends of the beam should not exceed 10,find the deflection at the centre of beam? a.18.41 mm b.13.45 mm c.17.45 mm d.21.67 mm.

Description : A beam 3m long simply supported at its ends ,is carrying a point load W at the centre.If the slope at the ends of the beam should not exceed 10,find the deflection at the centre of beam? a.18.41 mm b.13.45 mm c.17.45 mm d.21.67 mm.

Last Answer : c.17.45 mm

Clear distance between consecutive sleepers not to exceed on bridges in BG is a) 450 mm* b) 600 mm c) 510 mm d) 500 mm

Description : Clear distance between consecutive sleepers not to exceed on bridges in BG is a) 450 mm* b) 600 mm c) 510 mm d) 500 mm

Last Answer : a) 450 mm*

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Description : The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Last Answer : ANS: D

Number of subdivisions per metre length of a levelling staff is (A) 100 (B) 200 (C) 500 (D) 1000

Description : Number of subdivisions per metre length of a levelling staff is  (A) 100  (B) 200  (C) 500  (D) 1000 

Last Answer : (B) 200 

Profile levelling is usually done for determining (A) Contours of an area (B) Capacity of a reservoir (C) Elevations along a straight line (D) Boundaries of property

Description : Profile levelling is usually done for determining  (A) Contours of an area  (B) Capacity of a reservoir  (C) Elevations along a straight line  (D) Boundaries of property 

Last Answer : (C) Elevations along a straight line