The first reading from a level station is (A) Foresight (B) Intermediate sight (C) Back-sight (D) Any sight

The first reading from a level station is 

(A) Foresight 

(B) Intermediate sight 

(C) Back-sight 

(D) Any sight 

by

1 Answer

Answer :

(C) Back-sight 

by

Related questions

Define the terms - Foresight, back sight, intermediate sight and change point.

Description : Define the terms - Foresight, back sight, intermediate sight and change point.

Last Answer : 1. Fore sight: It is the last staff reading from any set up of the leveling instrument and indicates the shifting of the instrument or end of leveling work. 2. Back sight: It is the first staff reading ... point fore sight is taken from one set up and a back sight is taken from the nest set up. 

During levelling if back sight is more than foresight (A) The forward staff is at lower point (B) The back staff is at lower point (C) The difference in level, cannot be ascertained (D) None of these

Description : During levelling if back sight is more than foresight (A) The forward staff is at lower point (B) The back staff is at lower point (C) The difference in level, cannot be ascertained (D) None of these

Last Answer : (B) The back staff is at lower point

In levelling operation, (A) The first sight on any change point is a back sight (B) The second sight on any change point is a fore sight (C) The line commences with a fore sight and closes with a back sight (D) The line commences with a back sight and closes with a foresight

Description : In levelling operation, (A) The first sight on any change point is a back sight (B) The second sight on any change point is a fore sight (C) The line commences with a fore sight and closes with a back sight (D) The line commences with a back sight and closes with a foresight

Last Answer : (D) The line commences with a back sight and closes with a foresight

The back staff reading on a B.M. of R.L. 500.000 m is 2.685 m. If foresight reading on a point is 1.345 m, the reduced level of the point, is (A) 502.685 m (B) 501.345 m (C) 501.340 m (D) 504.030 m

Description : The back staff reading on a B.M. of R.L. 500.000 m is 2.685 m. If foresight reading on a point is 1.345 m, the reduced level of the point, is (A) 502.685 m (B) 501.345 m (C) 501.340 m (D) 504.030 m

Last Answer : (C) 501.340 m

Which of the following statements is incorrect? (A) Error due to refraction may not be completely eliminated by reciprocal levelling (B) Tilting levels are commonly used for precision work (C) The last reading of levelling is always a foresight (D) All of the above statements are incorrect

Description : Which of the following statements is incorrect? (A) Error due to refraction may not be completely eliminated by reciprocal levelling (B) Tilting levels are commonly used for precision work (C) The last reading of levelling is always a foresight (D) All of the above statements are incorrect

Last Answer : (D) All of the above statements are incorrect

Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up the instrument in any position (C) The first sight on each change point is a fore sight (D) All the above

Description : Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up ... position (C) The first sight on each change point is a fore sight (D) All the above

Last Answer : (D) All the above

A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier A reads (A) Azimuth of the forward line (B) Bearing of the forward line (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Description : A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier ... (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Last Answer : (A) Azimuth of the forward line

A back sight (A) Is always taken on a point of known elevation or can be computed (B) Is added to the known level to obtain the instrument height (C) Taken on an inverted staff is treated as negative (D) All the above

Description : A back sight  (A) Is always taken on a point of known elevation or can be computed  (B) Is added to the known level to obtain the instrument height  (C) Taken on an inverted staff is treated as negative  (D) All the above 

Last Answer : (D) All the above 

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

Define i) Back Sight Reading ii) Height of instrument

Description : Define i) Back Sight Reading ii) Height of instrument 

Last Answer : i) Back Sight Reading: This is the first staff reading taken in any set up of the instrument after leveling has been perfectly done. This reading is always taken on a point of known RL i.e on bench mark ... by adding the BS reading to the RL of the BM or CP on which the staff reading was taken.

In a precision traverse, included angles are measured by setting the vernier (A) To read zero exactly on back station (B) To read 5° exactly on back station (C) Somewhere near zero and reading both verniers on back station (D) All the above

Description : In a precision traverse, included angles are measured by setting the vernier  (A) To read zero exactly on back station  (B) To read 5° exactly on back station  (C) Somewhere near zero and reading both verniers on back station  (D) All the above

Last Answer : (C) Somewhere near zero and reading both verniers on back station 

State the important points kept in mind while recording the staff readings in level pages with respect first reading, intermediate reading, last reading, change point, carry forward from one page to next page-Remark

Description : State the important points kept in mind while recording the staff readings in level pages with respect first reading, intermediate reading, last reading, change point, carry forward from one page to next page-Remark

Last Answer : 1) First reading is on bench mark point and should be noted in back sight(BS) column 2) Intermediate reading (IS) should be taken on the points between first and last station. 3) Last reading ... column of next page 6) Remark column should have denote First and Last RL along with change points.

State the important points kept in mind while recording the readings in level pages with respect first reading, intermediate readings, last reading, and change point, carry forward from one page to next page - Remarks.

Description : State the important points kept in mind while recording the readings in level pages with respect first reading, intermediate readings, last reading, and change point, carry forward from one page to next page - Remarks. 

Last Answer : The following points should be kept in mind while recording the reading in level pages. 1. The first reading should be always noted as back sight (B.S.) 2. All the intermediate readings should ... horizontal line represents only one station. 8. Readings of each station should be in one line only.

Where does Theo Jansen get his foresight from?

Description : Where does Theo Jansen get his foresight from?

Last Answer : answer:I'm sure he reads a lot. He knows about genetics and evolution and mechanical engineering and computers and probably a lot more. He's a tinkerer who probably grew up tinkering with ... same thing happens with his beach creatures. This is how science meets engineering and gee whiz results.

What is the meaning of foresight ?

Description : What is the meaning of foresight ?

Last Answer : farsightedness means far sightedness.

A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff readings at and were 1.22 and 1.06. With the level set up at , the readings at and were 1.55 and 1.37. The collimation error per 100 m length of sight is (A) 0.02 m inclined upwards (B) 0.04 m inclined downwards (C) 0.04 m inclined upward (D) None of these

Description : A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff  readings at and were 1.22 and 1.06. With the level set up at , the readings at  and were 1.55 and ... upwards  (B) 0.04 m inclined downwards  (C) 0.04 m inclined upward  (D) None of these

Last Answer : (B) 0.04 m inclined downwards 

A sewer is laid from a manhole to a manhole , 250 m away along a gradient of 1 in 125. If the reduced level of the invert at is 205.75 m and the height of the boning rod is 3 m, the reduced level of the sight rail at , is (A) 208.75 m (B) 202.75 m (C) 206.75 m (D) 211.75 m

Description : A sewer is laid from a manhole to a manhole , 250 m away along a gradient of 1 in 125. If the  reduced level of the invert at is 205.75 m and the height of the boning rod is 3 m, the reduced  level of the sight rail at , is  (A) 208.75 m  (B) 202.75 m  (C) 206.75 m  (D) 211.75 m

Last Answer : (C) 206.75 m 

The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of gradient and the foot of the staff (B) Twice the distance between the zero of graduation and the foot of the staff (C) Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Description : The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of ... Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Last Answer : (B) Twice the distance between the zero of graduation and the foot of the staff

In an adjusted level, when the bubble is central, the axis of the bubble tube becomes parallel to (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Description : In an adjusted level, when the bubble is central, the axis of the bubble tube becomes parallel to (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Last Answer : (A) Line of sight

When the bubble of the level tube of a level, remains central (A) Line of sight is horizontal (B) Axis of the telescope is horizontal (C) Line of collimation is horizontal (D) Geometrical axis of the telescope is horizontal

Description : When the bubble of the level tube of a level, remains central (A) Line of sight is horizontal (B) Axis of the telescope is horizontal (C) Line of collimation is horizontal (D) Geometrical axis of the telescope is horizontal

Last Answer : (A) Line of sight is horizontal

1. What is the intermediate tier of the Panchayati Raj System called? 2. What is Green Gold? 3. What was the mascot for the 2012 Olympic Games held in London? 4. The hill station of Coonoor is located in which state? 5. Who were the first to start a joint stock company trade with India?

Description : 1. What is the intermediate tier of the Panchayati Raj System called? 2. What is Green Gold? 3. What was the mascot for the 2012 Olympic Games held in London? 4. The hill station of Coonoor ... is the major item of export from Paradeep Port ? 20. Where did Moplah rebellion of 1921 take place?

Last Answer : Answer : 1. Panchayat Samiti 2. Tea 3. Wenlock 4. Kerala 5. Portuguese 6. Iron, chromium and nickel 7. Thyroid 8. Kolkata 9. Delhi 10. English 11. Dr. Venugopal 12. 24th December 13. Offset printing 14. ... 1930 16. Islets of langerhans 17. President 18. S. H. F. J. Manekshaw 19. Iron Ore 20. Kerala

An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Description : An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Last Answer : D. 99.7 MHz

The rise and fall method of reduction of levels, provides a check on (A) Back sights (B) Fore sights (C) Intermediate sights (D) All of these

Description : The rise and fall method of reduction of levels, provides a check on (A) Back sights (B) Fore sights (C) Intermediate sights (D) All of these

Last Answer : (D) All of these

The line of collimation method of reduction of levels, does not provide a check on (A) Intermediate sights (B) Fore sights (C) Back sights (D) Reduced levels

Description : The line of collimation method of reduction of levels, does not provide a check on (A) Intermediate sights (B) Fore sights (C) Back sights (D) Reduced levels

Last Answer : (A) Intermediate sights

Centering error of a theodolite produces an error (A) In all angles equally (B) Which does not vary with the direction or pointing (C) Which varies with the direction of pointing and inversely with the length of sight (D) None of these

Description : Centering error of a theodolite produces an error (A) In all angles equally (B) Which does not vary with the direction or pointing (C) Which varies with the direction of pointing and inversely with the length of sight (D) None of these 

Last Answer : (C) Which varies with the direction of pointing and inversely with the length of sight 

Keeping the instrument height as 1½ m, length of staff 4 m, the up gradient of the ground 1 in 10, the sight on the up slope must be less than (A) 25 cm (B) 20 m (C) 45 m (D) 10 m

Description : Keeping the instrument height as 1½ m, length of staff 4 m, the up gradient of the ground 1 in 10,  the sight on the up slope must be less than  (A) 25 cm  (B) 20 m  (C) 45 m  (D) 10 m

Last Answer : (C) 45 m 

Keeping the instrument height as 1.5 m, length of staff 4 m, the slope of the ground as 1 in 10, the sight on the down-slope, must be less than (A) 30 m (B) 25 m (C) 20 m (D) 15 m

Description : Keeping the instrument height as 1.5 m, length of staff 4 m, the slope of the ground as 1 in 10, the  sight on the down-slope, must be less than  (A) 30 m  (B) 25 m  (C) 20 m  (D) 15 m 

Last Answer : (B) 25 m 

The intercept of a staff (A) Is maximum if the staff is held truly normal to the line of sight (B) Is minimum if the staff is held truly normal to the line of sight (C) Decreases if the staff is tilted away from normal (D) Increases if the staff is tilted towards normal

Description : The intercept of a staff (A) Is maximum if the staff is held truly normal to the line of sight (B) Is minimum if the staff is held truly normal to the line of sight (C) Decreases if the staff is tilted away from normal (D) Increases if the staff is tilted towards normal

Last Answer : (B) Is minimum if the staff is held truly normal to the line of sight

Two hill tops and 20 km apart are intervened by a third top . If the top most contour of the three hill tops are of the same value, state whether the line of sight AB (A) Passes clear of hill top C (B) Passes below the hill top C(C) Grazes the hill top C(D) None of these

Description : Two hill tops and 20 km apart are intervened by a third top . If the top most contour of the three hill tops are of the same value, state whether the line of sight AB (A) Passes clear of hill top C (B) Passes below the hill top C (C) Grazes the hill top C (D) None of these

Last Answer : (B) Passes below the hill top C

Pick up the correct statement from the following: (A) The eyepiece plays no part in defining the line of sight (B) The diaphragm plays no part in defining the line of sight (C) The optical centre of the objective plays no part in defining the line of sight (D) None of these

Description : Pick up the correct statement from the following: (A) The eyepiece plays no part in defining the line of sight (B) The diaphragm plays no part in defining the line of sight (C) The optical centre of the objective plays no part in defining the line of sight (D) None of these

Last Answer : (A) The eyepiece plays no part in defining the line of sight

The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Description : The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Last Answer : (B) Line of collimation

If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Description : If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Last Answer : (A) Horizontal sights

The line of sight is kept as high above ground surface as possible to minimise the error in the observed angles due to (A) Shimmering (B) Horizontal refraction (C) Vertical refraction (D) Both shimmering and horizontal refraction

Description : The line of sight is kept as high above ground surface as possible to minimise the error in the observed angles due to (A) Shimmering (B) Horizontal refraction (C) Vertical refraction (D) Both shimmering and horizontal refraction

Last Answer : (D) Both shimmering and horizontal refraction

If N is deviation angle the length L of a parabolic vertical curve for overtaking sight distance S, is (A) NS²/9.6 if L > S (B) NS²/9.6 if L < S (C) 2S - 9.6/N if L < S (D) Both (A) and (C)

Description : If N is deviation angle the length L of a parabolic vertical curve for overtaking sight distance S, is (A) NS²/9.6 if L > S (B) NS²/9.6 if L < S (C) 2S - 9.6/N if L < S (D) Both (A) and (C)

Last Answer : Answer: Option D

The absolute minimum sight distance required for stopping a vehicle moving with a speed of 80 kmph, is (A) 120 m (B) 200 m (C) 640 m (D) None of these

Description : The absolute minimum sight distance required for stopping a vehicle moving with a speed of 80 kmph, is (A) 120 m (B) 200 m (C) 640 m (D) None of these

Last Answer : Answer: Option A

Non-passing sight distance along a road is the longest distance at which the driver of a moving vehicle, may see an obstacle on the pavement (A) 10 cm high (B) 25 cm high (C) 50 cm high (D) 100 cm high

Description : Non-passing sight distance along a road is the longest distance at which the driver of a moving vehicle, may see an obstacle on the pavement (A) 10 cm high (B) 25 cm high (C) 50 cm high (D) 100 cm high

Last Answer : Answer: Option A

If N is the algebraic difference of grades, S is the minimum sight distance in metres, the length (L) of a summit curve is (A) NS/4 (B) NS²/4 (C) N²S/4(D) (NS)²/4

Description : If N is the algebraic difference of grades, S is the minimum sight distance in metres, the length (L) of a summit curve is (A) NS/4 (B) NS²/4 (C) N²S/4 (D) (NS)²/4

Last Answer : Answer: Option B

If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C) (B) N = (L + C) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Description : If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C ... ) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Last Answer : Answer: Option A

The maximum safe speed on roads, depends on the (A) Type of road surface (B) Type of curves (C) Sight distance (D) All the above

Description : The maximum safe speed on roads, depends on the (A) Type of road surface (B) Type of curves (C) Sight distance (D) All the above

Last Answer : Answer: Option D

The safe stopping sight distance D, may be computed from the equation (A) D = 0.278 Vt + V²/254f (B) D = 0.254 Vt + V²/278f (C) D = 0.254 Vt + V²/225f (D) D = 0.225 Vt + V²/254f

Description : The safe stopping sight distance D, may be computed from the equation (A) D = 0.278 Vt + V²/254f (B) D = 0.254 Vt + V²/278f (C) D = 0.254 Vt + V²/225f (D) D = 0.225 Vt + V²/254f

Last Answer : Answer: Option A

While calculating the sight distances, the driver's eye above road surface, is assumed (A) 90 cm (B) 100 cm (C) 110 cm (D) 120 cm

Description : While calculating the sight distances, the driver's eye above road surface, is assumed (A) 90 cm (B) 100 cm (C) 110 cm (D) 120 cm

Last Answer : Answer: Option D

While calculating the overtaking sight distance, the height of the object above road surface, is assumed (A) 50 cm (B) 75 cm (C) 100 cm (D) 120 cm

Description : While calculating the overtaking sight distance, the height of the object above road surface, is assumed (A) 50 cm (B) 75 cm (C) 100 cm (D) 120 cm

Last Answer : Answer: Option D

Design of horizontal and vertical alignments, super-elevation, sight distance and grades, is worst affected by (A) Width of the vehicle (B) Length of the vehicle (C) Height of the vehicle (D) Speed of the vehicle

Description : Design of horizontal and vertical alignments, super-elevation, sight distance and grades, is worst affected by (A) Width of the vehicle (B) Length of the vehicle (C) Height of the vehicle (D) Speed of the vehicle

Last Answer : Answer: Option D

If N is the net difference of grades, S is the minimum overtaken sight distance in metres, the length (L) of a summit curve, is (A) NS/4 (B) NS²/4 (C) NS²/4.8 (D) NS²/9.6

Description : If N is the net difference of grades, S is the minimum overtaken sight distance in metres, the length (L) of a summit curve, is (A) NS/4 (B) NS²/4 (C) NS²/4.8 (D) NS²/9.6

Last Answer : Answer: Option D

The distance travelled by a moving vehicle during perception and brake reaction times, is known as (A) Sight distance (B) Stopping distance (C) Lag distance (D) None of these

Description : The distance travelled by a moving vehicle during perception and brake reaction times, is known as (A) Sight distance (B) Stopping distance (C) Lag distance (D) None of these

Last Answer : Answer: Option C

For night travel, the length of a valley curve should be such that the head light beam distance is the same as (A) Stopping sight distance (B) Overtaking sight distance (C) Sum of (a) and (b) (D) Difference of (a) and (b)

Description : For night travel, the length of a valley curve should be such that the head light beam distance is the same as (A) Stopping sight distance (B) Overtaking sight distance (C) Sum of (a) and (b) (D) Difference of (a) and (b)

Last Answer : Answer: Option A

Length of vehicles does not affect (A) Extra widening (B) Minimum radius of turning (C) Passing sight distance (D) Width of shoulders

Description : Length of vehicles does not affect (A) Extra widening (B) Minimum radius of turning (C) Passing sight distance (D) Width of shoulders

Last Answer : Answer: Option D

Which one of the following statements is not correct ? (a) A surveyor’s compass has two sight vanes (b) A prismatic compass has an object vane and an eye vane (c) A trough compass is an accessory to a plane table (d) In a prismatic compass the graduations on the aluminimum disc rotate and the index remains stationary

Description : Which one of the following statements is not correct ? (a) A surveyor's compass has two sight vanes (b) A prismatic compass has an object vane and an eye vane (c) A trough compass ... table (d) In a prismatic compass the graduations on the aluminimum disc rotate and the index remains stationary

Last Answer : (a) A surveyor’s compass has two sight vanes