The least count of a Vernier scale is (A) Sum of the smallest divisions of main and Vernier scales (B) Value of one division of the primary scale divided by total number of divisions of Vernier scale (C) Value of one division of Vernier scale divided by total number of divisions of primary scale (D) None of these

The least count of a Vernier scale is 

(A) Sum of the smallest divisions of main and Vernier scales 

(B) Value of one division of the primary scale divided by total number of divisions of Vernier 

scale 

(C) Value of one division of Vernier scale divided by total number of divisions of primary scale 

(D) None of these 

by

1 Answer

Answer :

(B) Value of one division of the primary scale divided by total number of divisions of Vernier 

scale 

by

Related questions

If the smallest division of a vernier is longer than the smallest division of its primary scale, the vernier is known as (A) Direct vernier (B) Double vernier (C) Retrograde vernier (D) Simple vernier

Description : If the smallest division of a vernier is longer than the smallest division of its primary scale, the vernier is known as (A) Direct vernier (B) Double vernier (C) Retrograde vernier (D) Simple vernier

Last Answer : (C) Retrograde vernier

In case of a direct vernier scale (A) Graduations increase in opposite direction in which graduations of the main scale increase (B) Smallest division is longer than smallest division of the main scale (C) Graduations increase in the same direction in which graduations of the main scale increase (D) None of these

Description : In case of a direct vernier scale (A) Graduations increase in opposite direction in which graduations of the main scale increase (B) Smallest division is longer than smallest division of the main scale ... in the same direction in which graduations of the main scale increase (D) None of these

Last Answer : C) Graduations increase in the same direction in which graduations of the main scale increase

The main plate of a transit is divided into 1080 equal divisions. 60 divisions of the Vernier coincide exactly with 59 divisions of the main plate. The transit can read angles accurate upto (A) 5" (B) 10" (C) 15" (D) 20"

Description : The main plate of a transit is divided into 1080 equal divisions. 60 divisions of the Vernier coincide exactly with 59 divisions of the main plate. The transit can read angles accurate upto (A) 5" (B) 10" (C) 15" (D) 20"

Last Answer : (D) 20"

The main scale of a vernier callipers has n divisions/cm. n divisions of the vernier scale coincide with (n – 1) divisions of main scale.

Description : The main scale of a vernier callipers has n divisions/cm. n divisions of the vernier scale coincide with (n – 1) divisions of main scale.

Last Answer : The main scale of a vernier callipers has n divisions/cm. n divisions of the vernier scale coincide with (n - 1) ... n}\) (D) \(\frac{1}{n^2}\)

If a vernier spot coincides with a spot on the main scale or is closest to the spot, what is that spot called ?

Description : If a vernier spot coincides with a spot on the main scale or is closest to the spot, what is that spot called ?

Last Answer : If a vernier spot coincides with a spot on the main scale or is closest to the spot, then that spot is called vernier alignment.

The scale of a galvanometer of resistance `100 ohms` contains 25 divisions. It gives a defelction of one division on passing a current of `4xx 10 ^(-4

Description : The scale of a galvanometer of resistance `100 ohms` contains 25 divisions. It gives a defelction of one division on passing a current of `4xx 10 ^(-4

Last Answer : The scale of a galvanometer of resistance `100 ohms` contains 25 divisions. It gives a defelction of one division ... is A. 150 B. 170 C. 110 D. 220

The staff reading at a distance of 80 m from a level with the bubble at its centre is 1.31 m. When the bubble is moved by 5 divisions out of the centre, the reading is 1.39 m. The angular value of the one division of the bubble, is (A) 28.8 sec (B) 41.25 sec (C) 14.52 sec (D) 25.05

Description : The staff reading at a distance of 80 m from a level with the bubble at its centre is 1.31 m. When the bubble is moved by 5 divisions out of the centre, the reading is 1.39 m. The angular value of the one division of the bubble, is (A) 28.8 sec (B) 41.25 sec (C) 14.52 sec (D) 25.05

Last Answer : (B) 41.25 sec

A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular

Description : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular

Last Answer : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale ... (C) 0.053 cm (D) 0.529 cm

The total power consumed in a parallel circuit is __________. A. the sum of the powers used in each load (resistor) divided by the number of loads B. always less than the power used in the smallest load C. the sum of the powers used in each individual load D. never more than the power used in the largest load

Description : The total power consumed in a parallel circuit is __________. A. the sum of the powers used in each load (resistor) divided by the number of loads B. always less than the power used in the smallest ... of the powers used in each individual load D. never more than the power used in the largest load

Last Answer : Answer: C

The total power used up in a series circuit is ___________. A. the sum of the powers used in each load (resistor) divided by the number of loads B. the sum of the powers used in each load C. always less than the power used in the smallest load D. never more than the power used in largest load

Description : The total power used up in a series circuit is ___________. A. the sum of the powers used in each load (resistor) divided by the number of loads B. the sum of the powers used in each load C. always less than the power used in the smallest load D. never more than the power used in largest load

Last Answer : Answer: B

Who Discovered the Vernier Scale ?

Description : Who Discovered the Vernier Scale ?

Last Answer : Pierre Vernier discovers the Vernier scale.

What is Vernier Scale ?

Description : What is Vernier Scale ?

Last Answer : The Vernier scale is another small scale that is used next to the main scale to accurately measure the fraction of the smallest part of the original scale. Fractions in millimeters can be accurately determined using the Vernier scale with the meter scale.

What is the function of Vernier scale ?

Description : What is the function of Vernier scale ?

Last Answer : Verniers are used to accurately measure the length or width of an object.

What is the name of instrument used for measuring earthquake intensity? a. Modified Mercalli Scale b. Metrological scale c. Vernier scale d. Barometer

Description : What is the name of instrument used for measuring earthquake intensity? a. Modified Mercalli Scale b. Metrological scale c. Vernier scale d. Barometer

Last Answer : a. Modified Mercalli Scale

The scale that measures the intensity of earthquakes is called as (1) Vernier scale (2) Richter scale (3) Beaufort scale (4) Diagonal scale

Description : The scale that measures the intensity of earthquakes is called as (1) Vernier scale (2) Richter scale (3) Beaufort scale (4) Diagonal scale

Last Answer : Richter scale

If there are 8 division between the 0 mark and 0.4 mark of an ammeter it's least count is what?

Description : If there are 8 division between the 0 mark and 0.4 mark of an ammeter it's least count is what?

Last Answer : Need answer

In a precision traverse, included angles are measured by setting the vernier (A) To read zero exactly on back station (B) To read 5° exactly on back station (C) Somewhere near zero and reading both verniers on back station (D) All the above

Description : In a precision traverse, included angles are measured by setting the vernier  (A) To read zero exactly on back station  (B) To read 5° exactly on back station  (C) Somewhere near zero and reading both verniers on back station  (D) All the above

Last Answer : (C) Somewhere near zero and reading both verniers on back station 

You have to observe an included angle with better accuracy than what is achievable by a vernier, you will prefer the method of (A) Repetition (B) Reiteration (C) Double observations (D) Exactness

Description : You have to observe an included angle with better accuracy than what is achievable by a vernier,  you will prefer the method of  (A) Repetition  (B) Reiteration  (C) Double observations  (D) Exactness

Last Answer : (A) Repetition 

A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier A reads (A) Azimuth of the forward line (B) Bearing of the forward line (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Description : A transit is oriented by setting its vernier A to read the back azimuth of the preceding line. A back sight on the preceding transit station taken and transit is rotated about its vertical axis. The vernier ... (C) Back bearing of the forward line (D) Equal to 360°-azimuth of the forward line

Last Answer : (A) Azimuth of the forward line

Accurate measurement of deflection angles with a transit not properly adjusted may be made by (A) Setting the Vernier A at zero at back station and then plunging the telescope (B) Setting the Vernier A at zero at back station and turning the instrument to the forward station (C) Taking two back sights one with the telescope normal and the other with telescope inverted (D) None of these

Description : Accurate measurement of deflection angles with a transit not properly adjusted may be made by (A) Setting the Vernier A at zero at back station and then plunging the telescope (B) Setting the ... back sights one with the telescope normal and the other with telescope inverted (D) None of these

Last Answer : (C) Taking two back sights one with the telescope normal and the other with telescope inverted

Which one of the following statements is correct? (A) When the axes of rotation of the graduated circle and the verniers are not coincident, the instrument possesses eccentricity (B) The mean of the readings of the two verniers gives correct reading free from the eccentricity (C) One Vernier may be used if the readings of two verniers differ by a constant (D) All the above

Description : Which one of the following statements is correct? (A) When the axes of rotation of the graduated circle and the verniers are not coincident, the instrument possesses eccentricity (B) The mean of the ... Vernier may be used if the readings of two verniers differ by a constant (D) All the above

Last Answer : (D) All the above

How many meiotic divisions are required during the formation of 500 zzygotes, if in males one meiotic division result in formation of four male gamete

Description : How many meiotic divisions are required during the formation of 500 zzygotes, if in males one meiotic division result in formation of four male gamete

Last Answer : How many meiotic divisions are required during the formation of 500 zzygotes, if in males one meiotic division ... A. 625 B. 500 C. 1000 D. 2500

Cleavage divisions differ from normal mitotic divisions in that: (a) There is no nuclear division during cleavage (b) There is no division of cytoplasm during cleavage (c) The division of cytoplasm follows nuclear division (d) There is no period of growth in between divisions

Description : Cleavage divisions differ from normal mitotic divisions in that: (a) There is no nuclear division during cleavage (b) There is no division of cytoplasm during cleavage (c) The division of cytoplasm follows nuclear division (d) There is no period of growth in between divisions

Last Answer : Ans:(d)

Mark the correct option a) The Inspector should maintain a register of lines and stages in respect of his sub division in form M-40 b) Entries should be made in the register in alphabetical order, and where a line traverses sub-divisions each Inspector should record it throughout its length c) It is of special importance that the register should be kept corrected up-todate in accordance with correction memos issued by the Superinendent from time to time. d) All the above

Description : Mark the correct option a) The Inspector should maintain a register of lines and stages in respect of his sub division in form M-40 b) Entries should be made in the register in alphabetical ... in accordance with correction memos issued by the Superinendent from time to time. d) All the above

Last Answer : d) All the above

In grasses what happens in microspore mother cell for the formation of mature pollen grains? (a) One meiotic and two mitotic divisions (b) One meiotic and one mitotic divisions (c) One meiotic division (d) One mitotic division

Description : In grasses what happens in microspore mother cell for the formation of mature pollen grains? (a) One meiotic and two mitotic divisions (b) One meiotic and one mitotic divisions (c) One meiotic division (d) One mitotic division

Last Answer : (b) One meiotic and one mitotic divisions

A CRO screen has ten divisions on the horizontal scale. If a voltage signal 5 sin 314t+45 deg)is examined with a line base settings of 5 msec/div, the number of cycles of signal displayed on the screen will be a) 0.5 cycles b) 2.5 cycles c) 5 cycles d) 10 cycles

Description : A CRO screen has ten divisions on the horizontal scale. If a voltage signal 5 sin 314t+45 deg)is examined with a line base settings of 5 msec/div, the number of cycles of signal displayed on the screen will be a) 0.5 cycles b) 2.5 cycles c) 5 cycles d) 10 cycles

Last Answer : Ans: 2.5 cycles

An item on the University Book Shop's survey asks respondents to tell the shop, in their own words, what they like least about textbook shopping. This item would be an example of ________ question. A)an open-ended B)a dichotomous C)a forced-sum choice D)a multiple choice E)a scale

Description : An item on the University Book Shop's survey asks respondents to tell the shop, in their own words, what they like least about textbook shopping. This item would be an example of ________ question. A)an open-ended B)a dichotomous C)a forced-sum choice D)a multiple choice E)a scale

Last Answer : A)an open-ended

In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs) (A) 50" n(B) 30" n(C) 60" n (D) None of these

Description : In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per ... legs) (A) 50" n (B) 30" n (C) 60" n (D) None of these

Last Answer : (A) 50" n

If a person is 280 pounds on one weight scale what would the scale say if you stood on two scales?

Description : If a person is 280 pounds on one weight scale what would the scale say if you stood on two scales?

Last Answer : 140 if the weight is distributed evenly. If one scale is on top of the other, one will read a little more.

On a scale of 1-10, how do you rate rating scales?

Description : On a scale of 1-10, how do you rate rating scales?

Last Answer : 0. Grr. ;)

How is the kelvin scale different from the fahrenheit and celsius scales?

Description : How is the kelvin scale different from the fahrenheit and celsius scales?

Last Answer : bru im asking yall

You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should _____________. A. replace the batteries in the instrument B. measure resistance by dividing the voltmeter indication by the ammeter indication C. set the pointer using a bridge D. change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Description : You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should ... change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Last Answer : Answer: A

Nestle develops a scale to measure young adults' attitudes toward snacking. There is concern that if the questions were given to the same person several times they would produce different answers, Nestle is concerned about the scale's A)validity B)capacity C)dependability D)reliability

Description : Nestle develops a scale to measure young adults' attitudes toward snacking. There is concern that if the questions were given to the same person several times they would produce different answers, Nestle is concerned about the scale's A)validity B)capacity C)dependability D)reliability

Last Answer : D)reliability

List four temperature scales and state its icepoint and boiling point of water on each scale.

Description : List four temperature scales and state its icepoint and boiling point of water on each scale.

Last Answer : Temperature scales with ice point and boiling point of water :

What Is Keyword Density?  A. The Number Of Times The Keyword Is Used / (divided By) The Total Word Count On The Page  B.The Number Of Times The Keyword Is Used In The Page DescriptionC.The Number Of Times The Keyword Is Used X (MULTIPLIED BY) The Total Word Count On Page D.None of the above

Description : What Is Keyword Density?  A. The Number Of Times The Keyword Is Used / (divided By) The Total Word Count On The Page  B.The Number Of Times The Keyword Is Used In The Page Description C.The ... Times The Keyword Is Used X (MULTIPLIED BY) The Total Word Count On Page  D.None of the above

Last Answer : A. The Number Of Times The Keyword Is Used / (divided By) The Total Word Count On The Page

What is the value of the smallest cell on a meter scale ?

Description : What is the value of the smallest cell on a meter scale ?

Last Answer : The value of the smallest cell on a meter scale is 1 mm

The spacing of transverse reinforcement of column is decided by the following consideration. (A) The least lateral dimension of the column (B) Sixteen times the diameter of the smallest longitudinal reinforcing rods in the column (C) Forty-eight times the diameter of transverse reinforcement (D) All the above

Description : The spacing of transverse reinforcement of column is decided by the following consideration. (A) The least lateral dimension of the column (B) Sixteen times the diameter of the smallest longitudinal ... column (C) Forty-eight times the diameter of transverse reinforcement (D) All the above

Last Answer : Answer: Option D

Minimum pitch of transverse reinforcement in a column is (A) The least lateral dimension of the member (B) Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied (C) Forty-eight times the diameter of transverse reinforcement (D) Lesser of the above three values

Description : Minimum pitch of transverse reinforcement in a column is (A) The least lateral dimension of the member (B) Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied (C) Forty-eight times the diameter of transverse reinforcement (D) Lesser of the above three values

Last Answer : Answer: Option D

Mark correct option relating to live mail survey a) The survey is to be conducted in one delivery PO in each Postal Division. b) The PO to be selected should have a reasonable quantity of mail for study. c) 25% of the Post Offices selected for the survey should be in rural areas d) At least 25% of the total mails received in the PO selected is to be studied. e) All the above

Description : Mark correct option relating to live mail survey a) The survey is to be conducted in one delivery PO in each Postal Division. b) The PO to be selected should have a reasonable quantity of mail for study. ... least 25% of the total mails received in the PO selected is to be studied. e) All the above

Last Answer : e) All the above

Name the physical divisions into which India can be divided. -SST 10th

Description : Name the physical divisions into which India can be divided. -SST 10th

Last Answer : India can be divided into five main physical divisions such as, Mountainous region of the north, Indo-Gangetic plain, Southern Plateau region, Coastal plains and Thar desert.

Into how many divisions the Home Trade is divided?

Description : Into how many divisions the Home Trade is divided?

Last Answer : Into two they are, Whole sale and retail

The trade is sub divided into two divisions, which are they?

Description : The trade is sub divided into two divisions, which are they?

Last Answer : Home trade and Foreign trade.

The total resistance of a parallel circuit is always ____________. A. larger than that of the branch with the greatest resistance B. smaller than that of the branch with the lowest resistance C. equal to the sum of the individual branch resistances D. equal to the sum of the individual branch resistances divided by the number of branches

Description : The total resistance of a parallel circuit is always ____________. A. larger than that of the branch with the greatest resistance B. smaller than that of the branch with the lowest resistance C ... resistances D. equal to the sum of the individual branch resistances divided by the number of branches

Last Answer : Answer: B

The total voltage of a series circuit is the _____________. A. sum of the individual voltage drops B. total resistance divided by the total current C. sum of the individual currents multiplied by the number of resistors D. total current divided by the total resistance

Description : The total voltage of a series circuit is the _____________. A. sum of the individual voltage drops B. total resistance divided by the total current C. sum of the individual currents multiplied by the number of resistors D. total current divided by the total resistance

Last Answer : Answer: A

In measurements, the sum of a set of number divided by the total number of pieces of data in the given set is called ______

Description : In measurements, the sum of a set of number divided by the total number of pieces of data in the given set is called ______

Last Answer : arithmetic mean

Total number of meiotic divisions required for forming 100 zygotes/100 grains of wheat is (a) 100 (b) 75 (c) 125 (d) 50

Description : Total number of meiotic divisions required for forming 100 zygotes/100 grains of wheat is (a) 100 (b) 75 (c) 125 (d) 50

Last Answer : (c) 125

What is Vernier Compatibility ?

Description : What is Vernier Compatibility ?

Last Answer : If a vernier spot coincides with a spot on the main scale or is closest to the spot, then that spot is called vernier alignment.

What is the symbol of vernier conciliation ?

Description : What is the symbol of vernier conciliation ?

Last Answer : : Symbol of vernier conciliation V.

Vernier What ?

Last Answer : Vernier Scale Yes Any Of the object Length General Meters Of scale The smallest Sharing Fractions Until Exactly Get out To do For A Simple Instrument Which Chief Of scale With Helper Scale As Used Is.

Vernier Constant What ?

Last Answer : slide Calipers ( one Of sorts Measurer Instrument ) of Chief Of scale The smallest One Sharing Than Vernier Of scale One Share That's right How much? Small His The amount Vernier Constant Says. Now Chief Of scale The smallest One ... .1 m . Mr. _ Or 0.01 sec . Mr. _ . Hope I do To understand Got it.