At break point of chlorination, (A) Chlorine is used to oxidise (B) Residual chloride is zero (C) Residual chloride is maximum (D) Residual chlorine reappears

At break point of chlorination,
(A) Chlorine is used to oxidise
(B) Residual chloride is zero
(C) Residual chloride is maximum
(D) Residual chlorine reappears
by

1 Answer

Answer :

(D) Residual chlorine reappears
by

Related questions

At break point of chlorination, (A) Chlorine is used to oxidise (B) Residual chloride is zero (C) Residual chloride is maximum (D) Residual chlorine reappears

Description : At break point of chlorination,  (A) Chlorine is used to oxidise  (B) Residual chloride is zero  (C) Residual chloride is maximum  (D) Residual chlorine reappears 

Last Answer : (D) Residual chlorine reappears 

Raw water treated with only chlorine, is known as (A) Plain chlorination (B) Pre-chlorination (C) First-chlorination (D) De-chlorination

Description : Raw water treated with only chlorine, is known as (A) Plain chlorination (B) Pre-chlorination (C) First-chlorination (D) De-chlorination

Last Answer : (A) Plain chlorination

For plain chlorination of water, the quantity of chlorine used, is (A) 0.1 mg/litre (B) 0.2 mg/litre (C) 0.3 mg/litre (D) 0.5 mg/litre

Description : For plain chlorination of water, the quantity of chlorine used, is (A) 0.1 mg/litre (B) 0.2 mg/litre (C) 0.3 mg/litre (D) 0.5 mg/litre

Last Answer : (D) 0.5 mg/litre

Which of the following reasons are responsible for adoption of post-chlorination of water? 1. Chlorine demand is reduced. 2. Possibility of taste and odour formation is reduced. 3. Possibility of carcinogenic compounds is reduced. 4. Chloramines are formed. (a) 1, 2, 3 & 4 (b) 1, 2 & 3 only (c) 1, & 4 only (d) 2, 3 & 4 only

Description : Which of the following reasons are responsible for adoption of post-chlorination of water? 1. Chlorine demand is reduced. 2. Possibility of taste and odour formation is reduced. 3. Possibility of carcinogenic compounds is reduced. 4. Chloramines ... b) 1, 2 & 3 only (c) 1, & 4 only (d) 2, 3 & 4 only

Last Answer : (c) 1, & 4 only

Maximum permissible residual chlorine in treated water should be __________ mg/litre. (A) 0.001 to 0.01 (B) 0.2 to 0.3 (C) 2 to 3 (D) 5 to 10

Description : Maximum permissible residual chlorine in treated water should be __________ mg/litre. (A) 0.001 to 0.01 (B) 0.2 to 0.3 (C) 2 to 3 (D) 5 to 10

Last Answer : (B) 0.2 to 0.3

By adding 1 ml of Orthotolidine solution to 100 ml chlorinated water taken after contact period, the residual chlorine makes the colour of solution (A) Yellowish (B) Greenish (C) Bluish (D) Reddish

Description : By adding 1 ml of Orthotolidine solution to 100 ml chlorinated water taken after contact period, the residual chlorine makes the colour of solution (A) Yellowish (B) Greenish (C) Bluish (D) Reddish

Last Answer : (A) Yellowish

Which one of the following tests employs Ethylene Diamine Tetra Acetic Acid as a titrating agent? (a) Chlorides (b) Dissolved oxygen (c) Hardness (d) Residual chlorine

Description : Which one of the following tests employs Ethylene Diamine Tetra Acetic Acid as a titrating agent? (a) Chlorides (b) Dissolved oxygen (c) Hardness (d) Residual chlorine

Last Answer : (c) Hardness

'Chlorination' is 1. A process of converting chlorides into chlorine 2. Adding small amounts of chlorine to impure water 3. A chemical reaction in which chlorine is formed 4. An addition reaction of ethylene and chlorine The correct statements are: (a) 1 and 4 (b) 2 and 4 (c) 3 and 4 (d) 1 and 2

Description : 'Chlorination' is 1. A process of converting chlorides into chlorine 2. Adding small amounts of chlorine to impure water 3. A chemical reaction in which chlorine is formed 4. An addition reaction of ethylene and chlorine The correct statements are: (a) 1 and 4 (b) 2 and 4 (c) 3 and 4 (d) 1 and 2

Last Answer : Ans:(b)

Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

In the chlorination of alkanes, the first step in which chlorine free radicals are produced is called (a) initiation(b) activation(c) propagation(d) deactivation:

Description : In the chlorination of alkanes, the first step in which chlorine free radicals are produced is called : (a) initiation (b) activation (c) propagation (d) deactivation

Last Answer : initiation

Mixing vessel used for the chlorination of methane to produce methyl chloride is made of (A) Copper (B) Cast iron (C) Aluminium (D) High carbon steel

Description : Mixing vessel used for the chlorination of methane to produce methyl chloride is made of (A) Copper (B) Cast iron (C) Aluminium (D) High carbon steel

Last Answer : (B) Cast iron

The amount of Chlorine available in water after disinfection is called as – (1) free chlorine (2) residual chlorine (3) free available chlorine (4) combined available chlorine

Description : The amount of Chlorine available in water after disinfection is called as – (1) free chlorine (2) residual chlorine (3) free available chlorine (4) combined available chlorine

Last Answer : (2) residual chlorine Explanation: The word "residual" means "remainder" or "that which is left", and as the name suggests the chlorine residual is measure of the amount of chlorine ... system. Tests for chlorine residual are probably the most frequently performed tests at water treatment plants.

Presence of H2S in raw water (to be chlorinated) results in the (A) Reduced softening capacity of zeolite (B) Increased dosage of chlorine to provide a disinfecting residual in the water (C) Easy removal of its hardness (D) None of these

Description : Presence of H2S in raw water (to be chlorinated) results in the (A) Reduced softening capacity of zeolite (B) Increased dosage of chlorine to provide a disinfecting residual in the water (C) Easy removal of its hardness (D) None of these

Last Answer : (B) Increased dosage of chlorine to provide a disinfecting residual in the water

The amount of chlorine available in water after disinfection is called as (1) free chlorine (2) residual chlorine (3) free available chlorine (4) combined available chlorine

Description : The amount of chlorine available in water after disinfection is called as (1) free chlorine (2) residual chlorine (3) free available chlorine (4) combined available chlorine

Last Answer : residual chlorine

Itching all over the body , what is the solution ? Which medicine should I use ? My mother has a lot of itching all over her body. I have used scabies cream , fexo tablets in the morning, ketoral tablets , jairil tablets at night for 1 month. Also Ibn Sina's Nimi tablet. No work. After taking the medicine, it gets a little better and reappears. I have also used Dermasol N Cream. Suggest the latest what I can do.

Description : Itching all over the body , what is the solution ? Which medicine should I use ? My mother has a lot of itching all over her body. I have used scabies cream , fexo tablets in the morning, ketoral ... a little better and reappears. I have also used Dermasol N Cream. Suggest the latest what I can do.

Last Answer : Anyway, brother, I will tell you the name of a syrup, it will tell you to massage it all over your mother's body, only this, you don't have to take any more medicine. Your mother will massage ... ask to massage the whole body, you will get good results in 4/5 days. Tetrasol syrup costs 6 rupees.

Nuclear envelope reappears at

Description : Nuclear envelope reappears at

Last Answer : Nuclear envelope reappears at A. Metaphase B. Prophase C. Anaphase D. Telophase

Above image shows an experiment where copper sulphate crystals are heated. When we heat the crystals, they turn white. If you moisten the crystals again with water you will find that colour of crystals reappears . (1) How many water molecules are present in one formula unit of copper sulphate (a)5 (b)2 (c)6 (d)7

Description : Above image shows an experiment where copper sulphate crystals are heated. When we heat the crystals, they turn white. If you moisten the crystals again with water you will find that colour of crystals reappears . (1 ... are present in one formula unit of copper sulphate (a)5 (b)2 (c)6 (d)7

Last Answer : (a)5

During the final stage of cell division, the mitotic apparatus disappears, the chromosomes become attenuated, the centrioles duplicate and split, the nuclear membrane becomes reconstituted and the nucleolus reappears. This phase of cell division is known as:

Description : During the final stage of cell division, the mitotic apparatus disappears, the chromosomes become attenuated, the centrioles duplicate and split, the nuclear membrane becomes reconstituted and the nucleolus reappears. This ... as: a) prophase (pron: prO-phase) b) metaphase c) anaphase d) telophase

Last Answer : ANSWER: D -- Telophase

At "Break-even point", (1) the industry is in equilibrium in the long run. (2) the producers suffers the minimum losses (3) the seller earns maximum profit (4) the firm is at zero-profit point

Description : At "Break-even point", (1) the industry is in equilibrium in the long run. (2) the producers suffers the minimum losses (3) the seller earns maximum profit (4) the firm is at zero-profit point

Last Answer : (4) the firm is at zero-profit point Explanation: The break-even point (BEP) is the point at which cost or expenses and revenue are equal: there is no net loss or gain, and one has "broken even." For businesses, reaching the break-even point is the first major step towards profitability.

At “Break-even point”, (1) the industry is in equilibrium in the long-run. (2) the producers suffers the minimum losses (3) the seller earns maximum profit (4) the firm is at zero-profit point

Description : At “Break-even point”, (1) the industry is in equilibrium in the long-run. (2) the producers suffers the minimum losses (3) the seller earns maximum profit (4) the firm is at zero-profit point 

Last Answer : the firm is at zero-profit point

Standard process of chlorination of water, is done by (A) Plain chlorination (B) Pre-chlorination (C) Post-chlorination (D) Double chlorination

Description : Standard process of chlorination of water, is done by (A) Plain chlorination (B) Pre-chlorination (C) Post-chlorination (D) Double chlorination

Last Answer : (C) Post-chlorination

Chlorination of water does not remove (A) Ammonia content (B) B.O.D. (C) Organic matter content (D) Dissolved oxygen

Description : Chlorination of water does not remove (A) Ammonia content (B) B.O.D. (C) Organic matter content (D) Dissolved oxygen

Last Answer : (D) Dissolved oxygen

De-chlorination is followed by (A) Post-chlorination (B) Pre-chlorination (C) Double-chlorination (D) Super-chlorination

Description : De-chlorination is followed by (A) Post-chlorination (B) Pre-chlorination (C) Double-chlorination (D) Super-chlorination

Last Answer : (D) Super-chlorination

Dissolved carbon dioxide, can be removed from the supply main by (A) Sedimentation (B) Aeration (C) Chlorination (D) Coagulation

Description : Dissolved carbon dioxide, can be removed from the supply main by (A) Sedimentation (B) Aeration (C) Chlorination (D) Coagulation

Last Answer : (B) Aeration

During treatment of water, sedimentation is done (A) Before filtration (B) After filtration (C) Simultaneously with filtration (D) Along with chlorination

Description : During treatment of water, sedimentation is done  (A) Before filtration  (B) After filtration  (C) Simultaneously with filtration  (D) Along with chlorination 

Last Answer : (A) Before filtration 

The best process of disinfection of public water supply, is by (A) Boiling (B) Chlorination (C) Adding lime (D) Adding ozone

Description : The best process of disinfection of public water supply, is by  (A) Boiling  (B) Chlorination  (C) Adding lime  (D) Adding ozone 

Last Answer : (B) Chlorination 

The most commonly used chemical for de-chlorination of water, is (A) Sodium thiosulphate (B) Sodium bisulphate (C) Sodium sulphite (D) Sulphur-dioxide

Description : The most commonly used chemical for de-chlorination of water, is  (A) Sodium thiosulphate  (B) Sodium bisulphate  (C) Sodium sulphite  (D) Sulphur-dioxide 

Last Answer : (C) Sodium sulphite 

Plain chlorination is used for water (A) Obtained from clear lakes (B) Consumed during emergencies (C) Supplies to armies during war (D) All the above

Description : Plain chlorination is used for water  (A) Obtained from clear lakes  (B) Consumed during emergencies  (C) Supplies to armies during war  (D) All the above 

Last Answer : (D) All the above 

If Organic sources of carcinogenic compounds in water persist even after chlorination, then what is the correct sequence among treatment processes listed below if all these are considered compulsory ? 1. Coagulation 2. Sedimentation 3. Filtration in general 4. Activated carbon bed filtration 5. Flocculation 6. Chlorination a) 4-5-3-2-6 and 1 b) 1-2-3-4-5 and 6 c) 4- 2- 3- 1- 5 and 6 d) 1-5-2-3-4 and 6

Description : If Organic sources of carcinogenic compounds in water persist even after chlorination, then what is the correct sequence among treatment processes listed below if all these are considered compulsory ? 1. Coagulation 2. Sedimentation 3. Filtration in ... c) 4- 2- 3- 1- 5 and 6 d) 1-5-2-3-4 and 6

Last Answer : d) 1-5-2-3-4 and 6

If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be?

Description : If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be?

Last Answer : If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be zero.

Number of moles of `MnO_(4)^(-)` required to oxidise one mole of ferrous oxalate completely in acidic medium will be

Description : Number of moles of `MnO_(4)^(-)` required to oxidise one mole of ferrous oxalate completely in acidic medium will be

Last Answer : Number of moles of `MnO_(4)^(-)` required to oxidise one mole of ferrous oxalate completely in acidic medium ... .2 moles C. 0.6 moles D. 0.4 moles

When `S_(2)O_(8)^(2-)` oxidise `Fe^(2+)` then product formed is :-

Description : When `S_(2)O_(8)^(2-)` oxidise `Fe^(2+)` then product formed is :-

Last Answer : When `S_(2)O_(8)^(2-)` oxidise `Fe^(2+)` then product formed is :- A. `s_(2)O_(6)^(2-)` B. `SO_(4)^(2-)` C. `S_(2)O_(8)^(2-)` D. `SO_(5)^(2-)`

All living organisms retain the enzymatic machinery to partially oxidise glucose without the help of oxygen. This breakdown of glucose to pyruvic acid

Description : All living organisms retain the enzymatic machinery to partially oxidise glucose without the help of oxygen. This breakdown of glucose to pyruvic acid

Last Answer : All living organisms retain the enzymatic machinery to partially oxidise glucose without the help of oxygen ... of glucose to pyruvic acid is called.

All living organisms retain the enzymatic machinery to partially oxidise glucose without the help of oxygen. This breakdown of glucose to pyruvic acid

Description : All living organisms retain the enzymatic machinery to partially oxidise glucose without the help of oxygen. This breakdown of glucose to pyruvic acid

Last Answer : All living organisms retain the enzymatic machinery to partially oxidise glucose without the help of oxygen ... of glucose to pyruvic acid is called.

`K_2S_2O_8` , acidic `K_2S_2O_8` and acidic `MnO_2` oxidise `I^(-), Br^(-) , Cl^(-)` to `I_2 , Br_2 and Cl_2` , respectively. From the given data the

Description : `K_2S_2O_8` , acidic `K_2S_2O_8` and acidic `MnO_2` oxidise `I^(-), Br^(-) , Cl^(-)` to `I_2 , Br_2 and Cl_2` , respectively. From the given data the

Last Answer : `K_2S_2O_8` , acidic `K_2S_2O_8` and acidic `MnO_2` oxidise `I^(-), Br^(-) , Cl^(-)` to `I_2 , ... gt I_2 gt Br_2` D. `Cl_2 gt K_2 S_2O_8 gt Br_2`

The ionisation energy of dioxygen (`O_2`) is very close to that of Xenon. Also F and O have the highest electronegativity and consequently can oxidise

Description : The ionisation energy of dioxygen (`O_2`) is very close to that of Xenon. Also F and O have the highest electronegativity and consequently can oxidise

Last Answer : The ionisation energy of dioxygen (`O_2`) is very close to that of Xenon. Also F and O have ... (D) clathrates with He and Ne are highly expolsive.

The ionisation energy of dioxygen (`O_2`) is very close to that of Xenon. Also F and O have the highest electronegativity and consequently can oxidise

Description : The ionisation energy of dioxygen (`O_2`) is very close to that of Xenon. Also F and O have the highest electronegativity and consequently can oxidise

Last Answer : The ionisation energy of dioxygen (`O_2`) is very close to that of Xenon. Also F and O have ... +6HF underset(Delta)overset("475 K")to XeF_6+3H_2O`

The ionisation energy of dioxygen (`O_2`) is very close to that of Xenon. Also F and O have the highest electronegativity and consequently can oxidise

Description : The ionisation energy of dioxygen (`O_2`) is very close to that of Xenon. Also F and O have the highest electronegativity and consequently can oxidise

Last Answer : The ionisation energy of dioxygen (`O_2`) is very close to that of Xenon. Also F and O have the highest ... Ill), (lV) D. (D) (I), (lV)

If equal volumes of `0.1 M KMnO_(4)` and `0.1 M K_(2)Cr_(2)O_(7)` solutions are allowed to oxidise `Fe^(2+)` to `Fe^(3+)` in acidic medium, then `Fe^(

Description : If equal volumes of `0.1 M KMnO_(4)` and `0.1 M K_(2)Cr_(2)O_(7)` solutions are allowed to oxidise `Fe^(2+)` to `Fe^(3+)` in acidic medium, then `Fe^(

Last Answer : If equal volumes of `0.1 M KMnO_(4)` and `0.1 M K_(2)Cr_(2)O_(7)` solutions are allowed to ... O_(7)` C. equal in both cases D. cannot be determined.

`underset("Brown")([(NH_(3))_(5)Co-O-O-Co(NH_(3))_(5)]^(4+)) underset("oxidise")overset([S_(2)O_(8)]^(2-))tounderset("Green")([(NH_(3))_(5)Co-O-O-Co(N

Description : `underset("Brown")([(NH_(3))_(5)Co-O-O-Co(NH_(3))_(5)]^(4+)) underset("oxidise")overset([S_(2)O_(8)]^(2-))tounderset("Green")([(NH_(3))_(5)Co-O-O-Co(N

Last Answer : `underset("Brown")([(NH_(3))_(5)Co-O-O-Co(NH_(3))_(5)]^(4+)) underset("oxidise")overset([S_(2)O_(8) ... III " "IV" & "III" "III),("brown "" green"):}`

Consider the following statements in the extraction of iron from haematite: (I) `CO`is the main reducing agent (II) `Fe_(2)O_(3)`is used to oxidise th

Description : Consider the following statements in the extraction of iron from haematite: (I) `CO`is the main reducing agent (II) `Fe_(2)O_(3)`is used to oxidise th

Last Answer : Consider the following statements in the extraction of iron from haematite: (I) `CO`is the main reducing agent (II) ... I, II and III D. I, II and IV

The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. Flourish in the presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Description : The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. ... presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Last Answer : ANS: D

Why pcc cannot oxidise methanol to methane and while KMnO4 can ?

Description : Why pcc cannot oxidise methanol to methane and while KMnO4 can ? 

Last Answer : Ans. This is because pcc is a mild oxidising agent and can oxide methanol to methanal only. While KMnO4 being strong oxidising agent oxidises it to methanoic acid.

Why pcc cannot oxidise methanol to methane and while KMnO4 can ?

Description : Why pcc cannot oxidise methanol to methane and while KMnO4 can ?

Last Answer : This is because pcc is a mild oxidising agent and can oxide methanol to methanal only. While KMnO4 being strong oxidising agent oxidises it to methanoic acid. 

Both silver and copper oxidise in air. Then why copper contacts are silver-plated?

Description : Both silver and copper oxidise in air. Then why copper contacts are silver-plated? 

Last Answer : The silver plating avoids the oxidation of copper, especially in outdoors. Silver oxidises very readily. But its oxide is a good electrical conductor but copper oxide produce a film of insulation. 

Nitrifying bacteria (a) oxidise ammonia to nitrates (b) convert free nitrogen to nitrogen compounds (c) convert proteins into ammonia (d) reduce nitrates to free nitrogen.

Description : Nitrifying bacteria (a) oxidise ammonia to nitrates (b) convert free nitrogen to nitrogen compounds (c) convert proteins into ammonia (d) reduce nitrates to free nitrogen.

Last Answer : (a) oxidise ammonia to nitrates

Biochemical Oxygen Demand (BOD) of sewage is the (a) Oxygen required to oxidise (b) Oxygen required to oxidise biologically inactive organic matter* (c) a and b both (d) none of these

Description : Biochemical Oxygen Demand (BOD) of sewage is the (a) Oxygen required to oxidise (b) Oxygen required to oxidise biologically inactive organic matter* (c) a and b both (d) none of these

Last Answer : (b) Oxygen required to oxidise biologically inactive organic matter*

Write the balanced equation for the following chemical reactions. (i) Hydrogen + Chlorine → Hydrogen chloride (ii) Barium chloride + Aluminium sulphate → Barium sulphate + Aluminium chloride (iii) Sodium + Water → Sodium hydroxide + Hydrogen -Chemistry-10

Description : Write the balanced equation for the following chemical reactions. (i) Hydrogen + Chlorine → Hydrogen chloride (ii) Barium chloride + Aluminium sulphate → Barium sulphate + Aluminium chloride (iii) Sodium + Water → Sodium hydroxide + Hydrogen -Chemistry-10

Last Answer : (i) H2 + Cl2 → 2HCl (ii) 3 BaCl2 + Al2(SO4)3 → BaSO4 + 2 AlCl3 (iii) 2Na + 2H2O → 2NaOH + H2↑

(a) Define a balanced chemical equation. Why should an equation be balanced? (b) Write the balanced chemical equation for the following reaction: (i) Phosphorus burns in presence of chlorine to form phosphorus penta chloride. (ii) Burning of natural gas. (iii) The process of respiration. -Chemistry

Description : (a) Define a balanced chemical equation. Why should an equation be balanced? (b) Write the balanced chemical equation for the following reaction: (i) Phosphorus burns in presence of chlorine to form phosphorus penta chloride. (ii) Burning of natural gas. (iii) The process of respiration. -Chemistry

Last Answer : Answer. (a) Balanced chemical equation has an equal number of atoms of different elements in the reactants and products. According to law of conservation of mass, matter can neither be created nor be destroyed in a chemical ... C6H12O6 (s) + 6O2 (g) + 6H2O ---> 6CO2 (aq) + 12H2O (l) + energy

(a) Write electron dot diagram for chlorine (At No. 17) and calcium (At No. 20). Show the formation of calcium chloride by transfer of electrons. (b) Identify the nature of above compound’and explain three physical properties of such compound. -Chemistry

Description : (a) Write electron dot diagram for chlorine (At No. 17) and calcium (At No. 20). Show the formation of calcium chloride by transfer of electrons. (b) Identify the nature of above compound’and explain three physical properties of such compound. -Chemistry

Last Answer : (b) It is ionic compound. Physical properties 1.It is hard and solid. 2.It has high melting and boiling point. 3.It soluble in water.