Description : For plain chlorination of water, the quantity of chlorine used, is (A) 0.1 mg/litre (B) 0.2 mg/litre (C) 0.3 mg/litre (D) 0.5 mg/litre
Last Answer : (D) 0.5 mg/litre
Description : Standard process of chlorination of water, is done by (A) Plain chlorination (B) Pre-chlorination (C) Post-chlorination (D) Double chlorination
Last Answer : (C) Post-chlorination
Description : De-chlorination is followed by (A) Post-chlorination (B) Pre-chlorination (C) Double-chlorination (D) Super-chlorination
Last Answer : (D) Super-chlorination
Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available
Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available
Description : Which of the following reasons are responsible for adoption of post-chlorination of water? 1. Chlorine demand is reduced. 2. Possibility of taste and odour formation is reduced. 3. Possibility of carcinogenic compounds is reduced. 4. Chloramines ... b) 1, 2 & 3 only (c) 1, & 4 only (d) 2, 3 & 4 only
Last Answer : (c) 1, & 4 only
Description : Plain chlorination is used for water (A) Obtained from clear lakes (B) Consumed during emergencies (C) Supplies to armies during war (D) All the above
Last Answer : (D) All the above
Description : At break point of chlorination, (A) Chlorine is used to oxidise (B) Residual chloride is zero (C) Residual chloride is maximum (D) Residual chlorine reappears
Last Answer : (D) Residual chlorine reappears
Description : The most commonly used chemical for de-chlorination of water, is (A) Sodium thiosulphate (B) Sodium bisulphate (C) Sodium sulphite (D) Sulphur-dioxide
Last Answer : (C) Sodium sulphite
Description : 'Chlorination' is 1. A process of converting chlorides into chlorine 2. Adding small amounts of chlorine to impure water 3. A chemical reaction in which chlorine is formed 4. An addition reaction of ethylene and chlorine The correct statements are: (a) 1 and 4 (b) 2 and 4 (c) 3 and 4 (d) 1 and 2
Last Answer : Ans:(b)
Description : In the chlorination of alkanes, the first step in which chlorine free radicals are produced is called : (a) initiation (b) activation (c) propagation (d) deactivation
Last Answer : initiation
Description : Chlorination of treated waste water is required for
Last Answer : Chlorination of treated waste water is required for A. Killing all microbes B. Removing suspended ... breakdown of organic matter D. All the above
Description : Which of the following has high tensile strength? (A) Plain hot rolled wires (B) Cold drawn wires (C) Heat treated rolled wires (D) All have same tensile strength
Last Answer : Answer: Option B
Description : Chlorination of water does not remove (A) Ammonia content (B) B.O.D. (C) Organic matter content (D) Dissolved oxygen
Last Answer : (D) Dissolved oxygen
Description : During treatment of water, sedimentation is done (A) Before filtration (B) After filtration (C) Simultaneously with filtration (D) Along with chlorination
Last Answer : (A) Before filtration
Description : The best process of disinfection of public water supply, is by (A) Boiling (B) Chlorination (C) Adding lime (D) Adding ozone
Last Answer : (B) Chlorination
Description : If Organic sources of carcinogenic compounds in water persist even after chlorination, then what is the correct sequence among treatment processes listed below if all these are considered compulsory ? 1. Coagulation 2. Sedimentation 3. Filtration in ... c) 4- 2- 3- 1- 5 and 6 d) 1-5-2-3-4 and 6
Last Answer : d) 1-5-2-3-4 and 6
Description : Dissolved carbon dioxide, can be removed from the supply main by (A) Sedimentation (B) Aeration (C) Chlorination (D) Coagulation
Last Answer : (B) Aeration
Description : Ammonium chloride solution is stored/ treated in __________ vessels/pipes. (A) Plain carbon steel (B) Stainless steel (C) Rubber or durmet-20 lined (D) Lead
Last Answer : (C) Rubber or durmet-20 lined
Description : Presence of H2S in raw water (to be chlorinated) results in the (A) Reduced softening capacity of zeolite (B) Increased dosage of chlorine to provide a disinfecting residual in the water (C) Easy removal of its hardness (D) None of these
Last Answer : (B) Increased dosage of chlorine to provide a disinfecting residual in the water
Description : How long does it take chlorine to dissipate from treated water?
Last Answer : 24 hours should do it.
Description : Water of often treated with chlorine to
Last Answer : Water of often treated with chlorine to A. Increased oxygen content B. Kill germs C. Remove hardness D. Remove suspended particles.
Description : Municipal water in India is generally treated with (a) Chlorine (b) Potassium permanganate (c) Sodium Chloride (d) Sodium Carbonate
Last Answer : Ans:(a)
Description : Maximum permissible residual chlorine in treated water should be __________ mg/litre. (A) 0.001 to 0.01 (B) 0.2 to 0.3 (C) 2 to 3 (D) 5 to 10
Last Answer : (B) 0.2 to 0.3
Description : Iron & manganese present in the polluted water is removed by (A) Simple filtration (B) Oxidation followed by settling & filtration (C) Chemical coagulation (D) Chlorination only
Last Answer : (B) Oxidation followed by settling & filtration
Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material
Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine
Description : How was Samuel de Champlain get treated like when he got back to France?
Last Answer : Need answer
Description : Items that are purchased routinely, do not become part of the final physical product, and are treated like expense items rather than capital goods are called 1. raw materials 2. major equipment 3. accessory equipment 4. component part 5. process materials
Last Answer : accessory equipment
Description : Items that are purchased routinely, do not become part of the final physical product, and are treated like expense items rather than capital goods are called A)raw materials. B)major equipment. C)accessory equipment. D)component parts. E)process materials.
Last Answer : C)accessory equipment.
Description : Which of the following is the process of the pre-processing stage? a.Remove support b.Checking 3D CAD data c.De-powdering loose material d.Dip in a binder to strengthen the part
Last Answer : b.Checking 3D CAD data
Description : Nucleotides required for the synthesis of nucleic acids can be obtained from (A) Dietary nucleic acids and nucleotides (B) De novo synthesis (C) Salvage of pre-existing bases and nucleosides (D) De novo synthesis and salvage
Last Answer : Answer : D
Description : Explain pre-emphasis and de-emphasis concept in FM.
Last Answer : Pre-emphasis:- In an FM system the higher frequencies contribute more to the noise than the lower frequencies. Because of this all FM systems adopt a system of pre-emphasis where the higher frequencies are ... at receiver to improve the noise immunity Pre-emphasis/ De-emphasis graph:
Description : Bauxide ore is made up of `Al_(2)O_(3) + SiO_(2) + TiO_(2) + Fe_(2) O_(3)`. This ore is treated with conc. `NaOH` solution at `500 K` and `35` bar pre
Last Answer : Bauxide ore is made up of `Al_(2)O_(3) + SiO_(2) + TiO_(2) + Fe_(2) O_(3)`. This ore is treated with ... `Na_(2)SiO_(3)` both D. `Na_(2)SiO_(3)` Only
Description : Iron and manganese present as pollutants in water cannot be re-moved by - (1) oxidation followed by settling and filtration (2) chlorination (3) ion exchange process (4) lime soda process or manganese zeolite process
Last Answer : (2) chlorination Explanation: Water chlorination is the process of adding chlorine or hypochlorite to water. This method is used to kill certain bacteria and other microbes in tap water as chlorine is ... is used to prevent the spread of waterborne diseases such as cholera, dysentery, typhoid etc.
Description : Chlorination of water is done for the removal of A. Bacterias B. Suspended solids C. Sediments D. Hardness
Last Answer : ANS: A
Description : Phenolic water generated in coke ovens & by-product plant attached to an integrated steel plant containing phenol in concentration of less than 100 mg/litre can be removed by (A) Chlorination (B) Treating in biological oxygen pond (C) Chemical coagulation (D) None of these
Last Answer : (B) Treating in biological oxygen pond
Description : Which is the most practical and economical method for removal of suspended solid matter from polluted water? (A) Sedimentation (B) Skimming off (C) Chlorination (D) Biological oxidation
Last Answer : (A) Sedimentation
Description : Iron & manganese present as pollutant in water cannot be removed by (A) Ion exchange process (B) Oxidation followed by settling & filtration (C) Lime soda process or manganese zeolite process (D) Chlorination
Last Answer : (D) Chlorination
Description : Iron and manganese present as pollutants in water cannot be removed by_____ (1) oxidation followed by settling and filtration (2) chlorination (3) ion exchange process (4) lime soda process or manganese zeolite process
Last Answer : chlorination
Description : Consider the following pre-conditions for correct use of a theodolite: 1. The vertical axis need not be perpendicular to the plane of the plate level bubble. 2. The line of sight must be perpendicular to the horizontal axis. 3. The axis of ... ? (a) 1, 2, 3 & 4 (b) 2 only (c) 3 only (d) 1 & 4 only
Last Answer : (b) 2 only
Description : The preparation of surface of stone to obtain plain edges or to obtain stones of required size and shape is known as (A) Quarrying of stones (B) Blasting of stones (C) Seasoning of stones (D) Dressing of stones
Last Answer : Answer: Option D
Description : How many positional isomers of pentachlorobenzene can be formed during the chlorination of benzene. Please help, I don't know how. Thank you
Last Answer : Need Answer
Description : Chlorination of benzene is done to produce benzene hexachloride (a pesticide) in a photochemical reactor lined with (A) Karbate (B) Lead or glass (C) Fireclay bricks (D) PVC
Last Answer : (B) Lead or glass
Description : Mixing vessel used for the chlorination of methane to produce methyl chloride is made of (A) Copper (B) Cast iron (C) Aluminium (D) High carbon steel
Last Answer : (B) Cast iron
Description : Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral ... through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide
Last Answer : (D) Benzene hexachloride is not a contact insecticide
Description : Chlorination of an alkane as compared to bromination proceeds (a) at a slower rate (b) at a faster rate (c) with equal rates (d) with equal or different rate depending upon the source of alkane
Last Answer : at a faster rate
Description : The chlorination of methane to give CCl4 is an example of (a) an electrophilic addition (b) a free-radical substitution (c) a nucleophilic addition (d) an electrophilic substitution
Last Answer : a free-radical substitution
Description : BHC (Benzene hexachloride) is made by the chlorination of benzene (A) Which is an addition reaction (B) Which is a substitution reaction (C) In absolute dark (D) In presence of sunlight
Last Answer : (A) Which is an addition reaction
Description : Salmonellae can also be killed by A- Pasteurization B- Chlorination C- .boiling D- all of these
Last Answer : all of these