Explain in brief the working principle of strain gauge. Define gauge factor and list out types of strain gauges.

Explain in brief the working principle of strain gauge. Define gauge factor and list out types of strain gauges.
by

1 Answer

Answer :

If a metal conductor is stretched or compressed, the resistance changes as both length and diameter change. There is a change in the value of resistivity of the conductor also when it is strained and this property is called Piezoresistive effect. Strain gauges work on the principle of “Piezoresistive effect”. When a strain gauge is subjected to positive strain, its length increases and area of cross section decreases. As resistance R is directly proportional to its length L and inversely proportional to the area of cross section A, the resistance of the conductor increases with positive strain. But this change is greater than that due to change in dimensions. As R =( ρ L)÷A, where ρ = resistivity of the conductor, the extra change in dimensions is due to change in resistivity of the conductor when strained. This property is piezoresistive effect. 


Gauge Factor: It is the defined as the ratio of per unit change in resistance to per unit change in length. 


Types of strain gauges 

1. Unbonded metal strain gauges 2. Bonded metal wire strain gauges 3. Bonded metal foil strain gauges 4. Bonded semiconductor strain gauges 5.Vacuum deposited metal film strain gauges 6. Diffused metal strain gauges 7. Sputter deposited thin metal strain gauge

by

Related questions

The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain

Description : The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain gauges, primarily due to : (A) higher temperature sensitivity (B) higher Poisson’s ratio (C) higher piezoresitive coefficient (D) higher magnetostrictive coefficient

Last Answer : The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain gauges, primarily due to : higher piezoresitive coefficient

Draw and explain the operation of pressure transducer having diaphragm as a primary sensor and four strain gauges as secondary sensors.

Description : Draw and explain the operation of pressure transducer having diaphragm as a primary sensor and four strain gauges as secondary sensors.

Last Answer : Pressure measurement with strain gauges on diaphragm: Description: This method uses the principle of converting pressure into a displacement by elastic elements which act as primary ... unbalance in the bridge circuit, producing an output voltage proportional to the applied pressure.

Un-bonded strain gauges are _____.

Last Answer : Un-bonded strain gauges are exclusively used for transducer applications.

State function of strain gauge. Give its types and explain working of any one type of it.

Description : State function of strain gauge. Give its types and explain working of any one type of it.

Last Answer : Function of strain gauge: - ➢ The strain gauge is a passive, resistive transducer which converts the mechanical elongation and compression into a resistance change. ➢ This change in ... change in resistivity. 3. Silicon and germanium are used as resistive material for semiconductor gauges

Explain working of resistance strain gauge

Description : Explain working of resistance strain gauge

Last Answer : Principle working: Strain gauge is a passive, versatile transducer and it is often used for measuring weight, pressure, force and displacement .They sense the strain produced in a wire due to applied ... , allowing the strain measured to be related to the applied stress and hence the force applied.

Define : i) Strain gauge ii) Gauge factor

Description : Define : i) Strain gauge ii) Gauge factor

Last Answer : i) Strain gauge is a resistance transducer whose resistance varies with applied force; It converts force, pressure, tension, weight, etc., into a change in electrical resistance which can then be measured ... is defined as the ratio of per unit change in resistance to per unit change in length 

Gauge factor of strain gauge is defined as the ratio of per unit change in the ______.

Description :  Gauge factor of strain gauge is defined as the ratio of per unit change in the ______.

Last Answer :  Gauge factor of strain gauge is defined as the ratio of per unit change in the resistance to the per unit change in the length of the element.

Which of the gauges is used in the hilly areas? A. Narrow Gauge B. Meter Gauge C. Broad Gauge D. Special Gauge

Description : Which of the gauges is used in the hilly areas? A. Narrow Gauge B. Meter Gauge C. Broad Gauge D. Special Gauge

Last Answer : A [Narrow Gauge] Explanation: Narrow gauge is used in the hilly areas.

How strain gauge is used for pressure measurement, explain?

Description : How strain gauge is used for pressure measurement, explain?

Last Answer : strain gauge: - strain gauge is used for pressure measurement as one of the arm of a wheatstones' bridge, the pressure is applied to the strain gauge through diaphragm elastic pressure sensor.

Describe in brief working of Symons rain gauge with neat labelled sketch.

Description : Describe in brief working of Symons rain gauge with neat labelled sketch.

Last Answer : The most common type of non- recording rain gauges used in our country is the Symon's raingauge'.  Working: A Symons Rain gauge consists of a cylindrical vessel of 127 mm internal diameter with an enlarged ... rim which is then measured by the measuring glass in mm' and tenth of mm'

Dummy strain gauge is used in conjunction with the main strain gauge to _____.

Description : Dummy strain gauge is used in conjunction with the main strain gauge to _____.

Last Answer : Dummy strain gauge is used in conjunction with the main strain gauge to compensate temperature effects.

If Poisson's ratio of a resistance wire strain gauge is 1.8, then neglecting piezo-resistive effects, its Gauge

Description : If Poisson's ratio of a resistance wire strain gauge is 1.8, then neglecting piezo-resistive effects, its Gauge factor is :  (A) 2.8 (B) 2.6 (C) 4.6 (D) 3.6

Last Answer : If Poisson's ratio of a resistance wire strain gauge is 1.8, then neglecting piezo-resistive effects, its Gauge factor is : 4.6

A strain gauge is a passive transducer and is employed for converting

Description : A strain gauge is a passive transducer and is employed for converting   (a) Pressure into change in resistance (b) Force into displacement (c) Mechanical displacement into a change of resistance (d) None of the above 

Last Answer : A

List the types of ADCs. Explain working principle of any one type of ADC.

Description : List the types of ADCs. Explain working principle of any one type of ADC.

Last Answer : Types : 1. Successive approximation type A/D converter or Potentiometric type 2.Voltage to time or ramp type A/D converter 3.Voltage to frequency or integrating type A/D converter 4.Dual ... analog voltage and reference voltage are converted to ramp signals of different slopes by the integrator.

Working principle of dead weight pressure gauge tester is based on (A) Pascal's law (B) Dalton's law of partial pressure (C) Newton's law of viscosity (D) Avogadro's hypothesis

Description : Working principle of dead weight pressure gauge tester is based on (A) Pascal's law (B) Dalton's law of partial pressure (C) Newton's law of viscosity (D) Avogadro's hypothesis

Last Answer : Answer: Option A

State the working principle of Bellows pressure gauge with neat sketch.

Description : State the working principle of Bellows pressure gauge with neat sketch.

Last Answer : Bellows pressure gauge: Diagram: Principle: Bellows element is the elastic element which gets deflected at the free end when pressure is applied through fixed end. This free end deflection can be taken as the measure of pressure inside it.

Measuring force without a strain gauge?

Description : Measuring force without a strain gauge?

Last Answer : answer:Do you want to know the force or the pressure at the tip? Will this be changing rapidly? Let's assume you want the force first and you will calculate the pressure from the force and ... device and work out the force from the assembly's resonant freq. Lots of possibilities. Not enough detail.

Which of the listed devices may be used as a digital device? A. variable resistor B. diode C. strain gauge D. thermistor

Description : Which of the listed devices may be used as a digital device? A. variable resistor B. diode C. strain gauge D. thermistor

Last Answer : Answer: B

__________ circuit is most commonly used to measure strain with the help of a strain gauge. (A) Ballast (B) Voltage balancing potentiometric (C) Simple current sensitive (D) None of these

Description : __________ circuit is most commonly used to measure strain with the help of a strain gauge. (A) Ballast (B) Voltage balancing potentiometric (C) Simple current sensitive (D) None of these

Last Answer : Option B

How to Measure a Strain Gauge

Description : How to Measure a Strain Gauge

Last Answer : How to Measure a Strain Gauge There are several ways to measure strain. The most common is to use a strain gauge. In laymen's terms, a strain gauge is a device whose electrical ... who supply all the necessary strain gauges and materials from connection tags, to binding adhesives and training.

Sketch DC signal conditioning circuit for pressure measurement using strain gauge. Justify it.

Description : Sketch DC signal conditioning circuit for pressure measurement using strain gauge. Justify it.

Last Answer : Diagram: Figure: DC signal conditioning circuit for pressure measurement using strain gauge Where, Rg= strain gauge resistance. Explanation: In order to measure strain with ... millivolts output per volt input. The Wheatstone circuit is also well suited for temperature compensation.

Describe strain gauge with labelled diagram.

Description : Describe strain gauge with labelled diagram.

Last Answer : A Strain gauge is a sensor whose resistance varies with applied force. It converts force, pressure, tension, weight, etc., into a change in electrical resistance which can then be measured. When external ... to the applied strain. So, the voltmeter can be calibrated in terms of strain or force. 

The advantage of a semiconductor strain gauge cover the wire round strain gauge is that

Description : The advantage of a semiconductor strain gauge cover the wire round strain gauge is that

Last Answer : The advantage of a semiconductor strain gauge cover the wire round strain gauge is that it is more sensitive

In a strain measuring device, using a strain gauge, the output quantity is ....

Description : In a strain measuring device, using a strain gauge, the output quantity is  A) Voltage B) resistance C) Impedance D) either A) or B)

Last Answer : In a strain measuring device, using a strain gauge, the output quantity is Voltage

The main drawback of the railway network in India is (a) lack of rolling stock (b) existence of single track in many areas (c) lack of coal (d) the presence of three types of gauges

Description : The main drawback of the railway network in India is (a) lack of rolling stock (b) existence of single track in many areas (c) lack of coal (d) the presence of three types of gauges

Last Answer : Ans: (d)

With the help of necessary sketch, explain in brief the working of brushless DC motor.

Description : With the help of necessary sketch, explain in brief the working of brushless DC motor. 

Last Answer : Constructional Diagram of Brushless DC Motor: Working of brushless DC motor: The brushless DC motor is the combination of a permanent excited synchronous motor and a frequency ... Suitable PWM techniques allow regenerative breaking, which increases dynamic and efficiency of the drive. 

Draw and explain construction of Faiveley type pantograph collector. Also explain its working in brief.

Description : Draw and explain construction of Faiveley type pantograph collector. Also explain its working in brief. 

Last Answer : Faiveley type pantograph collector:  Construction of Faiveley type pantograph collector :  It consists of i) sub frame or base, ii) Articulated system, iii) Pneumatic control system including ... move freely in the slot of slotted rod & pantograph is operated purely by the up springs.

Explain in brief cam. State the types of cam. List two applications.

Description : Explain in brief cam. State the types of cam. List two applications.

Last Answer : Working principle of cam: A cam is mechanical rotating machine element which is used for converting one motion in to another. A cam is a curved or grooved surface which mates with a ... . Printing control mechanisms. Spinning and weaving machineries. Textile machineries. Paper cutting machines.

List types of memory. Explain any one type of memory in brief.

Description : List types of memory. Explain any one type of memory in brief.

Last Answer : Types of Memories in PLC:  i) Executive Memory  ii) Scratch Pad Memory  iii) Data Table a) Input image memory b) Output image Memory c) Internal bits/ registers/ words  ... storage for programmed instructions entered by the user. The user program area also stores the control program.

List the different techniques used for signal conditioning in DAS. Explain in brief Any one signal conditioning technique.

Description : List the different techniques used for signal conditioning in DAS. Explain in brief Any one signal conditioning technique.

Last Answer : Types of Signal Conditioning techniques in DAS: 1) Attenuation 2) Amplification 3) Linearization 4) Filtering 5) Ratiometric conversion 6) Logarithmic conversion  Attenuation: An ... in medical investigatory circuits, photo detectors, ionizing radiation detectors and ultrasound receivers etc.

State working principle of photo diode. List out its three applications.

Description : State working principle of photo diode. List out its three applications.

Last Answer : Diagram of photo diode :  Working principle of photo diode :  When photons of energy greater than 1.1 eV hit the diode, electron-hole pairs are created. The ... Smoke detector, Optical communication devices, Position sensors, Bar code scanners, Automotive devices, Surveying instruments

Explain in brief the principle of operation of successive Approximation ADC.

Description : Explain in brief the principle of operation of successive Approximation ADC.

Last Answer : The circuit of successive approximation ADC consists of a successive approximation register (SAR), to find the required value of each bit by trial & error.With the arrival of START command, SAR sets the MSB ... /P signal. This O/P is low or High. This process continues until all bits are checked.

State the working principle of Cam. List its types. Give any four applications of Cam.

Description : State the working principle of Cam. List its types. Give any four applications of Cam.

Last Answer : Working principle of CAM: A cam is mechanical rotating machine element which is used for converting one motion in to another. It is rotating machine element that gives reciprocating or ... control mechanisms. Spinning and weaving machineries. Textile machineries. Paper cutting machines.

List the types of rail gauge.

Description : List the types of rail gauge.

Last Answer : 1. Broad gauge = 1676 mm 2. Meter gauge 1000 mm 3. Narrow gauge = 762 mm 4. Light gauge =610 mm 

I can't get my gauges out of my ears. Does anyone have experience and can help?

Description : I can't get my gauges out of my ears. Does anyone have experience and can help?

Last Answer : you need to see a doctor, an ENT if you have one nearby. the skin may have adhered to the gauges, and if they have, they might have to be removed surgically.

Define gauge pressure and differential pressure

Description : Define gauge pressure and differential pressure

Last Answer : (i) Gauge pressure: Gauge pressure is defined as the difference between actual pressure and atmospheric pressure.  Gauge pressure= Pabsolute - Patmospheric  (ii) Atmospheric pressure: Atmospheric pressure ... atmosphere around it. It shows the difference between two pressures of the same unit. 

Define absolute pressure and gauge pressure. State the different units for pressure measurement.

Description : Define absolute pressure and gauge pressure. State the different units for pressure measurement.

Last Answer : Definition: Absolute pressure: Absolute pressure is defined as actual total pressure including atmospheric pressure actin On a surface. PAbsolute= PAtmospheric + PGauge Gauge pressure: Gauge pressure is defined ... mm of mercury column (blood pressure) inches of water Barmillibar (weather) Torr

Why get gauges if you don't want to stretch your ears?

Description : Why get gauges if you don't want to stretch your ears?

Last Answer : Dont let her do it, theres no going back without surgery.

Which are the three Gauges in the Indian Railways? -SST 10th

Description : Which are the three Gauges in the Indian Railways? -SST 10th

Last Answer : Broad, Metre and Narrow Gauge.

What is a Panel in a car with gauges an instruments to help the driver?

Description : What is a Panel in a car with gauges an instruments to help the driver?

Last Answer : I call it the instrument panel but it's also called thedashboard or dash panel

How do ultrasonic thickness gauges work?

Description : How do ultrasonic thickness gauges work?

Last Answer : I found a few sites on the web that can help you this and finding out about this. Here are the sites you can look at www.olympus-ims.com/...ultrasonics/introduction-thickness-g

Which of the following stations has all the three gauges i.e Broad, Metre and Narrow? A. Lucknow B. Chandigarh C. Simla D. Siliguri

Description : Which of the following stations has all the three gauges i.e Broad, Metre and Narrow? A. Lucknow B. Chandigarh C. Simla D. Siliguri

Last Answer : D [Siliguri] Explanation: Siliguri Junction is one of the three railway stations that serve Siliguri in Darjeeling district in the Indian state of West Bengal. The other two stations are: Siliguri Town and New Jalpaiguri.

_________ are normally subjected to sub-zero treatment. (A) Highly stressed parts (B) Gauges or precision parts (C) Cold rolled sheets (D) Non machinable materials

Description : _________ are normally subjected to sub-zero treatment. (A) Highly stressed parts (B) Gauges or precision parts (C) Cold rolled sheets (D) Non machinable materials

Last Answer : (B) Gauges or precision parts

Indian Meteorological department uses the standard gauges whose collectors have apertures of (A) 50 or 100 sq. cm area (B) 100 or 150 sq. cm area (C) 100 or 200 sq. cm area (D) 250 or 500 sq. cm area

Description : Indian Meteorological department uses the standard gauges whose collectors have apertures of (A) 50 or 100 sq. cm area (B) 100 or 150 sq. cm area (C) 100 or 200 sq. cm area (D) 250 or 500 sq. cm area

Last Answer : Answer: Option C

Non-recording rain gauges (A) Collect the rain whose volume is measured by means of graduated cylinders (B) Collect the rain which is directly measured by means of graduated cylinders in centimetres of water depth (C) Are generally used in hilly terrain (D) Are cylindrical in shape

Description : Non-recording rain gauges (A) Collect the rain whose volume is measured by means of graduated cylinders (B) Collect the rain which is directly measured by means of graduated cylinders in centimetres of water depth (C) Are generally used in hilly terrain (D) Are cylindrical in shape

Last Answer : Answer: Option B

The specifications of most commonly used standard gauges in India, are (A) 200 sq. cm collector and 4 litres bottle (B) 100 sq. cm collector and 2 litres bottle (C) 200 sq. cm collector and 10 litres bottle (D) 100 sq. cm collector and 4 litres bottle

Description : The specifications of most commonly used standard gauges in India, are (A) 200 sq. cm collector and 4 litres bottle (B) 100 sq. cm collector and 2 litres bottle (C) 200 sq. cm collector and 10 litres bottle (D) 100 sq. cm collector and 4 litres bottle

Last Answer : Answer: Option A

Height gauges should be located at a minimum distance of….. from gate post. (a) 5 m (b) 7.5m (c) 8m* (d)10m

Description : Height gauges should be located at a minimum distance of….. from gate post. (a) 5 m (b) 7.5m (c) 8m* (d)10m

Last Answer : (c) 8m*

.In Indian Railway how many Gauges of Track has been adopted a. 1 b. 3* c. 2 d. 4

Description : .In Indian Railway how many Gauges of Track has been adopted a. 1 b. 3* c. 2 d. 4

Last Answer : b. 3*

Give the names of any four pressure gauges used for pressure measurement.

Description : Give the names of any four pressure gauges used for pressure measurement.

Last Answer : Pressure gauges used for pressure measurement : Bellows pressure gauge, diaphragm pressure gauge, strain gauge, Force balance pressure gauge (Dead weight pressure gauge) and Bourdon tube pressure gauge.