Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Pick out the wrong statement.
(A) Cold SBR is superior as compared to hot SBR
(B) Polymerisation temperature can modify the properties of SBR
(C) Production of cold SBR employs lower pressure as compared to that of
hot SBR
(D) None of these
by

1 Answer

Answer :

(D) None of these
by

Related questions

Pick out the wrong statement(A) Cold rubber (SBR) is superior as compared to hot rubber (SBR)(B) Polymerisation temperature can modify the properties of SBR(C) Production of cold SBR employs lower pressure as compared to that ofhot SBR(D) None of these

Description : Pick out the wrong statement (A) Cold rubber (SBR) is superior as compared to hot rubber (SBR) (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Description : Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Last Answer : (B) Stainless steel or glass lined vessel

Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel

Commercial production of polypropylene employs __________ polymerisation. (A) Emulsion (B) Suspension (C) Solution (D) Bulk

Description : Commercial production of polypropylene employs __________ polymerisation. (A) Emulsion (B) Suspension (C) Solution (D) Bulk

Last Answer : (C) Solution

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

Pick out the wrong statement. (A) Polystyrene is a thermoplastic polymer (B) Protein is a natural polymer (C) Neoprene is a natural rubber (D) Polythene is a copolymer, while SBR is a homopolymer

Description : Pick out the wrong statement. (A) Polystyrene is a thermoplastic polymer (B) Protein is a natural polymer (C) Neoprene is a natural rubber (D) Polythene is a copolymer, while SBR is a homopolymer

Last Answer : (C) Neoprene is a natural rubber

Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Description : Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Last Answer : (B) Achieves an yield of 95-98% based on ethylene

__________ of SBR is adversely affected, if more quantity of styrene is added to butadiene during its co-polymerisation to produce SBR. (A) Percent elongation (B) Resilience (C) Freezing point (D) Strength

Description : __________ of SBR is adversely affected, if more quantity of styrene is added to butadiene during its co-polymerisation to produce SBR. (A) Percent elongation (B) Resilience (C) Freezing point (D) Strength

Last Answer : (B) Resilience

SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1

Description : SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1

Last Answer : (A) 1: 3

Pick out the wrong statement. (A) Biological oxygen demand (B.O.D.) value of a sewerage sample is always lower than its chemical oxygen demand (C.O.D.) value (B) Environmental pollution by NOx emission is much higher by four stroke petrol engines as compared to the two stroke engines (C) Temperature in stratosphere rises with increasing altitude (D) The characteristic of a green house body is that it allows the long wavelength incoming solar radiation to come in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

Description : Pick out the wrong statement. (A) Biological oxygen demand (B.O.D.) value of a sewerage sample is always lower than its chemical oxygen demand (C.O.D.) value (B) Environmental pollution by ... in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

Last Answer : (D) The characteristic of a green house body is that it allows the long wavelength incoming solar radiation to come in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Last Answer : (A) 50°C and 3 - 4 kg/cm

Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Last Answer : (A) 5°C and 1 kgf/cm

Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation

Description : Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation

Last Answer : C) Teflon is formed by step growth polymerisation

Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Description : Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Last Answer : (A) Polymeric fibres are never produced by addition polymerisation

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both temperature and pressure in the digestor is less in case of the sulphite method as compared to that in the sulphate method (D) None of these

Description : Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both ... in case of the sulphite method as compared to that in the sulphate method (D) None of these

Last Answer : (D) None of these

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Last Answer : (B) Employs condensation polymerisation

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Last Answer : (B) Employs condensation polymerisation

Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more as compared to that emitted by a four stroke engine (C) Carbon monoxide present in the two stroke petrol engine exhaust is much less as compared to that emitted from a four stroke engine (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Description : Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more ... can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Last Answer : (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE are engineering stress and engineering strain respectively (C) Phosphorous can be easily recovered in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material

Last Answer : Option C

Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation (B) Film co-efficient for vaporisation decreases as a result of vapor binding (C) In industrial practice, sub-cooling of condensate is required, when thecondensate is a volatile liquid and is to be transferred for storage(D) Overall heat transfer co-efficient in a heat exchanger is controlled by thevalue of the film co-efficient, which is higher

Description : Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation ( ... in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Last Answer : (D) Overall heat transfer co-efficient in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Pick out the wrong statement. (A) Heat transfer from a hot body to cold body by the emission of heat waves is called radiation (B) Filmwise condensation takes place on non-wettable surfaces (C) The boiling point of a solution is affected by liquid head as well as boiling point elevation (D) None of these

Description : Pick out the wrong statement. (A) Heat transfer from a hot body to cold body by the emission of heat waves is called radiation (B) Filmwise condensation takes place on non-wettable surfaces (C) The ... of a solution is affected by liquid head as well as boiling point elevation (D) None of these

Last Answer : (B) Filmwise condensation takes place on non-wettable surfaces

Pick out the wrong statement pertaining to the soap manufacture. (A) Transparent soaps are made by cold process (B) Organic pigments are used as colouring materials in the soap manufacture (C) Both laundry as well as toilet soaps are manufactured by hot process (D) Colourless rosin is used in the manufacture of laundry soaps

Description : Pick out the wrong statement pertaining to the soap manufacture. (A) Transparent soaps are made by cold process (B) Organic pigments are used as colouring materials in the soap manufacture (C) ... soaps are manufactured by hot process (D) Colourless rosin is used in the manufacture of laundry soaps

Last Answer : (A) Transparent soaps are made by cold process

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile matter coals are more suitable for making pulverised fuel (C) Regulation of furnace temperature and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) Weldability of high carbon steel is poorer compared to low carbon steel (B) Invar is a magnetic alloy (C) Magnetic permeability of the diamagnetic material is less than one (D) Martenistic transformation never goes to completion (i.e., 100%) at room temperature

Description : Pick out the wrong statement. (A) Weldability of high carbon steel is poorer compared to low carbon steel (B) Invar is a magnetic alloy (C) Magnetic permeability of the diamagnetic material is less than one (D) Martenistic transformation never goes to completion (i.e., 100%) at room temperature

Last Answer : Option B

Pick out the wrong statement. (A) Catalytic activity of enzyme catalysed reactions which is affected by temperature, pH value & chemical agents, is maximum at a temperature of about 45°C(B) Most of the enzyme catalysed reactions involve at least two substrates (C) Enzymes help in increasing the activation energy of the reaction (D) Equilibrium concentrations in enzyme catalysed reactions can be calculated by using the thermodynamic properties of substrates & prod

Description : Pick out the wrong statement. (A) Catalytic activity of enzyme catalysed reactions which is affected by temperature, pH value & chemical agents, is maximum at a temperature of about 45°C ... in enzyme catalysed reactions can be calculated by using the thermodynamic properties of substrates & prod

Last Answer : (C) Enzymes help in increasing the activation energy of the reaction

Styrene butadiene rubber (SBR) as compared to natural rubber has (A) Poor tensile strength (B) Poorer resistance (C) Greater amount of heat build up heavy loading (D) All (A), (B) and (C)

Description : Styrene butadiene rubber (SBR) as compared to natural rubber has (A) Poor tensile strength (B) Poorer resistance (C) Greater amount of heat build up heavy loading (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Styrene-butadiene-rubber (SBR) as compared to natural rubber has (A) Poorer tensile strength (B) Poorer resistance to oxidation (C) Greater amount of heat build-up under heavy loading (D) All (A), (B) and (C)

Description : Styrene-butadiene-rubber (SBR) as compared to natural rubber has (A) Poorer tensile strength (B) Poorer resistance to oxidation (C) Greater amount of heat build-up under heavy loading (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to Nusselt number in heat transfer and Schmidt number to Prandtl number (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger (D) Hot gases at moderate pressure are usually in the shell side of shell and tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Description : Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to ... tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Last Answer : (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger

Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of forced draft cooling tower is reduced by the recirculation of the humid and hot discharged air (C) A natural draft cooling tower is recommended to be used, when the air humidity is low and air temperature is also low (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Description : Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of ... Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Last Answer : (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Pick out the wrong statement. (A) Tin can be readily and very easily drawn into very fine wire (B) Tin can be severely cold worked without the necessity of annealing due to its low recrystallisation temperature (C) Tin exists in two allotropic forms

Description : Pick out the wrong statement. (A) Tin can be readily and very easily drawn into very fine wire (B) Tin can be severely cold worked without the necessity of annealing due to its low recrystallisation temperature (C) Tin exists in two allotropic forms

Last Answer : (A) Tin can be readily and very easily drawn into very fine wire

Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its fatigue strength (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature

Description : Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its ... (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature

Last Answer : (C) Cold working of a metal decreases its fatigue strength

Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to the decrease in electron movement (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Description : Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to ... metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Last Answer : (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

Due to its excellent permeability to air/gas and oxidation resistance, the tubes of automobile tyres is made of(A) Cold SBR(B) Butyl rubber(C) Bunai N(D) Buna S

Description : Due to its excellent permeability to air/gas and oxidation resistance, the tubes of automobile tyres is made of (A) Cold SBR (B) Butyl rubber (C) Bunai N (D) Buna S

Last Answer : (B) Butyl rubber

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive

Starting material for the production of SBR is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Starting material for the production of SBR is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Starting material for the production of styrene butadiene rubber (SBR) is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Starting material for the production of styrene butadiene rubber (SBR) is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ions and forms amino acids(B) Calcium present in the fertiliser helps in correcting the soil acidity(C) Particle size range of a good granular fertiliser is 10-15 mesh and itcontains less moisture as compared to finely divided powder form of fertiliser(D) Ammonium nitrate fertiliser is obtained as a by-product in an integratedsteel plant having by-product coke ovens

Description : Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ... nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Last Answer : (D) Ammonium nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the metals except noble metals (C) Yellow color of impure nitric acid is because of dissolved oxides of nitrogen (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Description : Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the ... (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Last Answer : (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Pick out the wrong statement. (A) Strongly caking coal should not be used in the Lurgi gasifier (B) Acetylene gas cannot be used for illumination purpose (C) Water gas is called blue gas because of the color of the flame, when it is burnt (D) Gaseous fuels require less percentage of excess air for combustion as compared to liquid fuels

Description : Pick out the wrong statement. (A) Strongly caking coal should not be used in the Lurgi gasifier (B) Acetylene gas cannot be used for illumination purpose (C) Water gas is called blue gas ... is burnt (D) Gaseous fuels require less percentage of excess air for combustion as compared to liquid fuels

Last Answer : (B) Acetylene gas cannot be used for illumination purpose

Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year showing the cost at that time relative to a certain base year (C) Turnover ratio of a chemical plant is the ratio of gross annual sales to the fixed capital investment (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Description : Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year ... butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Last Answer : (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct process of by-product recovery (C) A high swelling index number of coking coal indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Description : Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct ... indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Last Answer : (C) A high swelling index number of coking coal indicates poor caking properties of coal

Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Description : Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Last Answer : (B) Sharp melting points

Pick out the wrong statement (A) Phase rule variables are intensive properties (B) Heat and work are both state function (C) The work done by expansion of a gas in vacuum is zero (D) CPand CVare state function

Description : Pick out the wrong statement (A) Phase rule variables are intensive properties (B) Heat and work are both state function (C) The work done by expansion of a gas in vacuum is zero (D) CPand CVare state function

Last Answer : (B) Heat and work are both state function