Crushing efficiency of a machine ranges between __________ percent. (A) 0.1 to 2 (B) 5 to 10 (C) 20 to 25

Crushing efficiency of a machine ranges between __________ percent.
(A) 0.1 to 2
(B) 5 to 10
(C) 20 to 25
by

1 Answer

Answer :

(A) 0.1 to 2
by

Related questions

'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost. (A) 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Description : 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product ... 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Last Answer : (B) 10 to 20

Energy consumed for crushing one ton of material ranges from __________ kWh. (A) 0.01 to 0.1 (B) 0.5 to 1.5 (C) 2 to 3.5 (D) 4 to 5

Description : Energy consumed for crushing one ton of material ranges from __________ kWh. (A) 0.01 to 0.1 (B) 0.5 to 1.5 (C) 2 to 3.5 (D) 4 to 5

Last Answer : (B) 0.5 to 1.5

Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Description : Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Last Answer : (B) 20 to 30

The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Description : The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Last Answer : (A) 3 to 4

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Description : Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Last Answer : (B) 20 to 40

Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Description : Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Last Answer : (B) 35 to 45

Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a particle of a particular size is proportional to the square root of the surface to volume ratio of the product (C) Work required in crushing is proportional to the new surface created (D) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Description : Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a ... ) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Last Answer : (C) Work required in crushing is proportional to the new surface created

Crushing efficiency is the ratio of the (A) Surface energy created by crushing to the energy absorbed by the solid (B) Energy absorbed by the solid to that fed to the machine (C) Energy fed to the machine to the surface energy created by crushing (D) Energy absorbed by the solid to the surface energy created by crushing

Description : Crushing efficiency is the ratio of the (A) Surface energy created by crushing to the energy absorbed by the solid (B) Energy absorbed by the solid to that fed to the machine (C) Energy ... surface energy created by crushing (D) Energy absorbed by the solid to the surface energy created by crushing

Last Answer : (A) Surface energy created by crushing to the energy absorbed by the solid

Maximum thermal efficiency of boiler may be about __________ percent. (A) 10 (B) 25 (C) 65 (D) 90

Description : Maximum thermal efficiency of boiler may be about __________ percent. (A) 10 (B) 25 (C) 65 (D) 90

Last Answer : (D) 90

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

Austenitic manganese steel used for making jaws of crushing machines contains about __________ percent manganese. (A) 1.5-2 (B) 3.5-4.5 (C) 7-9 (D) 12-14

Description : Austenitic manganese steel used for making jaws of crushing machines contains about __________ percent manganese. (A) 1.5-2 (B) 3.5-4.5 (C) 7-9 (D) 12-14

Last Answer : (D) 12-14

The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2

Description : The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2

Last Answer : (B) 1-1.5

Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration. b) 10-15 mm Hg water pressure. A measure of 10–15 mm Hg water pressure would indicate that the cuff is underinflated. c) 30-35 mm Hg water pressure. A measure of 30–35 mm Hg water pressure would indicate that the cuff is overinflated. d) 0-5 mm Hg water pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Description : Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the ... pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Last Answer : a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration.

Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20

Description : Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20

Last Answer : (B) 3 to 6

Thermal efficiency of an open hearth furnace may be about __________ percent. (A) 5 (B) 20 (C) 50 (D) 80

Description : Thermal efficiency of an open hearth furnace may be about __________ percent. (A) 5 (B) 20 (C) 50 (D) 80

Last Answer : (B) 20

Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Description : Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Last Answer : (B) 40

Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Description : Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Last Answer : (D) 80

In sewage treatment, the detention period allowed for oxidation ponds ranges from __________ weeks. (A) 1 to 2 (B) 4 to 5 (C) 9 to 10 (D) 15 to 20

Description : In sewage treatment, the detention period allowed for oxidation ponds ranges from __________ weeks. (A) 1 to 2 (B) 4 to 5 (C) 9 to 10 (D) 15 to 20

Last Answer : (B) 4 to 5

Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will just take hold of a particle and draw it in the crushing zone (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing (D) Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Description : Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will ... Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Last Answer : (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing

Length of cut for silage ranges from E. 2-4 cm F. 5-10 cm G. 15-20 cm H. 20-25 cm

Description : Length of cut for silage ranges from E. 2-4 cm F. 5-10 cm G. 15-20 cm H. 20-25 cm

Last Answer : E. 2-4 cm

Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500(D) 4000 to 5000

Description : Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500 (D) 4000 to 5000

Last Answer : (B) 100 to 200

Protein content in pulses ranges from(a) 10-15% (b) 20-25% (c) 25-30% (d) 40-45%

Description : Protein content in pulses ranges from(a) 10-15% (b) 20-25% (c) 25-30% (d) 40-45%

Last Answer : (b) 20-25%

Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Last Answer : (B) 60-65

In a size reduction crushing operation, the feed size is 10 to 50 mm, while the product size is 2 to 10 mm. This is a case of __________ crushing. (A) Primary (B) Secondary (C) Fine

Description : In a size reduction crushing operation, the feed size is 10 to 50 mm, while the product size is 2 to 10 mm. This is a case of __________ crushing. (A) Primary (B) Secondary (C) Fine

Last Answer : (C) Fine

In a size reduction crushing operation, feed size is 100 to 300 mm. while the product size is 10 to 50 mm. This is a case of the __________ crushing. (A) Primary (B) Secondary (C) Fine (D) Ultrafine

Description : In a size reduction crushing operation, feed size is 100 to 300 mm. while the product size is 10 to 50 mm. This is a case of the __________ crushing. (A) Primary (B) Secondary (C) Fine (D) Ultrafine

Last Answer : (B) Secondary

In a sedimentation tank, the detention period for water ranges from __________ hours. (A) 2 to 4 (B) 8 to 12 (C) 16 to 20 (D) 24 to 32

Description : In a sedimentation tank, the detention period for water ranges from __________ hours. (A) 2 to 4 (B) 8 to 12 (C) 16 to 20 (D) 24 to 32

Last Answer : (A) 2 to 4

The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Energy consumption in a crusher decreases with increase in the (A) Size of the product (at constant feed size) (B) Capacity of the crushing machine (C) Size of feed (at constant reduction ratio) (D) All (A), (B) & (C)

Description : Energy consumption in a crusher decreases with increase in the (A) Size of the product (at constant feed size) (B) Capacity of the crushing machine (C) Size of feed (at constant reduction ratio) (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

. Which of the following equations is Rittinger's crushing law? (Where P = power required by the machine, m = feed rate, k = a constant, Ds̅a & D̅sb = volume surface mean diameter of feed & product respectively.) (A) P/m = K/ √Dp (B) P/m = K . ln D̅sa /D̅sb (C) P/m = K . (1/ D̅sb - 1/Ds̅a ) (D) None of these

Description : . Which of the following equations is Rittinger's crushing law? (Where P = power required by the machine, m = feed rate, k = a constant, Ds̅a & D̅sb = volume surface mean diameter of feed & product respectively.) (A) P/m = K/ ... K . ln D̅sa /D̅sb (C) P/m = K . (1/ D̅sb - 1/Ds̅a ) (D) None of these

Last Answer : (C) P/m = K . (1/ D̅sb - 1/Ds̅a )

The difference in the reservoir level and the lowest point of the water mains is 180 m. The expected pressure due to water hammer is 7.5 kg/cm2 in a pressure conduit of diameter 1 m. Assuming the efficiency of the riveted joints of the pipe as 0.6 and minimum cover 3 mm for corrosion, the thickness of the pipe materials, is (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : The difference in the reservoir level and the lowest point of the water mains is 180 m. The  expected pressure due to water hammer is 7.5 kg/cm2  in a pressure conduit of diameter 1 m.  Assuming the efficiency of the ... , is  (A) 10 mm  (B) 15 mm  (C) 20 mm  (D) 25 mm 

Last Answer : (C) 20 mm

In practice, the compression ratio of compression-ignition (CI) engine ranges from (A) 15 to 25 (B) 5 to 10 (C) 40 to 55 (D) 60 to 70

Description : In practice, the compression ratio of compression-ignition (CI) engine ranges from (A) 15 to 25 (B) 5 to 10 (C) 40 to 55 (D) 60 to 70

Last Answer : Option A

Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Description : Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Last Answer : (A) 1-5

The value of ‘L/mG’ ratio for economical absorption operation ranges from (A) 0.5 to 0.8 (B) 0.8 to 1.2 (C) 1.25 to 2.0 (D) 2.5 to 3.5

Description : The value of ‘L/mG’ ratio for economical absorption operation ranges from (A) 0.5 to 0.8 (B) 0.8 to 1.2 (C) 1.25 to 2.0 (D) 2.5 to 3.5

Last Answer : (C) 1.25 to 2.0

The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Description : The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Last Answer : [a] 40-45 degree

The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Description : The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Last Answer : 15-25 and 25-30

The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. Flourish in the presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Description : The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. ... presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Last Answer : ANS: D

The ratio of working capital to total capital investment for most chemical plants (except for non-seasonal based products) is in the range of __________ percent. (A) 0.1 to 1 (B) 1 to 2 (C) 10 to 20 (D) 50 to 60

Description : The ratio of working capital to total capital investment for most chemical plants (except for non-seasonal based products) is in the range of __________ percent. (A) 0.1 to 1 (B) 1 to 2 (C) 10 to 20 (D) 50 to 60

Last Answer : (C) 10 to 20

Net efficiency of ordinary light water cooled nuclear reactor is about __________ percent. (A) 32 (B) 52 (C) 72 (D) 88

Description : Net efficiency of ordinary light water cooled nuclear reactor is about __________ percent. (A) 32 (B) 52 (C) 72 (D) 88

Last Answer : (A) 32

If the path of liquid across the plate is very long as in case of large diameter tower, Murphree efficiency can be __________ percent(A) 100(B) > 100(C) < 100(D) None of these

Description : If the path of liquid across the plate is very long as in case of large diameter tower, Murphree efficiency can be __________ percent (A) 100 (B) > 100 (C) < 100 (D) None of these

Last Answer : (B) > 100

The thermal efficiency of a steel slab reheating furnace (walking beam type) may be about __________ percent. (A) 15 (B) 40 (C) 70 (D) 85

Description : The thermal efficiency of a steel slab reheating furnace (walking beam type) may be about __________ percent. (A) 15 (B) 40 (C) 70 (D) 85

Last Answer : (B) 40

The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Description : The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Last Answer : (C) 85

Efficiency of power transmission (η) through a circular pipe is given by (ht - hf )/ht , which has a maximum value of __________ percent. (A) 33:3 (B) 50 (C) 66.6 (D) 88.8

Description : Efficiency of power transmission (η) through a circular pipe is given by (ht - hf )/ht , which has a maximum value of __________ percent. (A) 33:3 (B) 50 (C) 66.6 (D) 88.8

Last Answer : (C) 66.6

. Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65 (D) 80

Description : . Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65 (D) 80

Last Answer : Option B

Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65

Description : Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65

Last Answer : Option B

For a self locking lifting machine, the efficiency must be a.50 percent b.100 percent c.more than 50 percent d.107 dynes e.less than 50 percent

Description : For a self locking lifting machine, the efficiency must be a.50 percent b.100 percent c.more than 50 percent d.107 dynes e.less than 50 percent

Last Answer : e. less than 50 percent

Water content in the crude oil as it comes out of oil well may be upto __________ percent. (A) 2 (B) 5 (C) 10 (D) 25

Description : Water content in the crude oil as it comes out of oil well may be upto __________ percent. (A) 2 (B) 5 (C) 10 (D) 25

Last Answer : (D) 25

High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ percent. (A) 5 to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Description : High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ ... to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Last Answer : (C) 45 to 50

Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97

Description : Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97

Last Answer : (A) 80 and 97

In an isothermal process on an ideal gas, the pressure increases by 0.5 percent. The volume decreases by about __________ percent. (A) 0.25 (B) 0.5 (C) 0.75 (D) 1

Description : In an isothermal process on an ideal gas, the pressure increases by 0.5 percent. The volume decreases by about __________ percent. (A) 0.25 (B) 0.5 (C) 0.75 (D) 1

Last Answer : (B) 0.5