Comparing sulphate process with sulphite process, we find that __________ in the later. (A) Both temperature & pressure in the former is less than that (B) Both temperature & pressure in the former is more than that (C) Temperature is more in the former whereas pressure is more(D) Pressure is more in the former whereas temperature is less

Comparing sulphate process with sulphite process, we find that
__________ in the later.
(A) Both temperature & pressure in the former is less than that
(B) Both temperature & pressure in the former is more than that
(C) Temperature is more in the former whereas pressure is more
(D) Pressure is more in the former whereas temperature is less
by

1 Answer

Answer :

(B) Both temperature & pressure in the former is more than that
by

Related questions

Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both temperature and pressure in the digestor is less in case of the sulphite method as compared to that in the sulphate method (D) None of these

Description : Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both ... in case of the sulphite method as compared to that in the sulphate method (D) None of these

Last Answer : (D) None of these

Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process. (A) Mechanical (B) Sulphate/Kraft (C) Sulphite (D) Neutral sulphite semi-chemical

Description : Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process. (A) Mechanical (B) Sulphate/Kraft (C) Sulphite (D) Neutral sulphite semi-chemical

Last Answer : (D) Neutral sulphite semi-chemical

The most economical pulp for the production of newsprint would be the __________ pulp. (A) Ground-wood (B) Sulphate (C) Sulphite (D) Semi-chemical

Description : The most economical pulp for the production of newsprint would be the __________ pulp. (A) Ground-wood (B) Sulphate (C) Sulphite (D) Semi-chemical

Last Answer : (A) Ground-wood

Cooking liquor in case of sulphite process is (A) Sodium sulphite and sodium bisulphite (B) Magnesium sulphite and free SO2 in acid medium (C) Magnesium sulphate and magnesium bicarbonate (D) None of these

Description : Cooking liquor in case of sulphite process is (A) Sodium sulphite and sodium bisulphite (B) Magnesium sulphite and free SO2 in acid medium (C) Magnesium sulphate and magnesium bicarbonate (D) None of these

Last Answer : (A) Sodium sulphite and sodium bisulphite

Doctor's solution used for sweetening of petroleum products is (A) Sodium plumbite (B) Sodium sulphite (C) Sodium thiosulphate (D) Lead sulphate

Description : Doctor's solution used for sweetening of petroleum products is (A) Sodium plumbite (B) Sodium sulphite (C) Sodium thiosulphate (D) Lead sulphate

Last Answer : (A) Sodium plumbite

Which is a high grade pulp? (A) Rag pulp(B) Mechanical pulp(C) Sulphate pulp(D) Sulphite pulp

Description : Which is a high grade pulp? (A) Rag pulp (B) Mechanical pulp (C) Sulphate pulp (D) Sulphite pulp

Last Answer : (C) Sulphate pulp

Activity of cytochrome oxidase is inhibited by (A) Sulphite (B) Sulphate (C) Arsenite (D) Cyanide

Description : Activity of cytochrome oxidase is inhibited by (A) Sulphite (B) Sulphate (C) Arsenite (D) Cyanide

Last Answer : Answer : D

In Kraft process of paper manufacture, white cooking liquor consists of caustic soda (A) Sodium sulphide & sodium carbonate (B) Sodium sulphite & sodium carbonate (C) Sodium sulphite & sodium sulphide (D) None of these

Description : In Kraft process of paper manufacture, white cooking liquor consists of caustic soda (A) Sodium sulphide & sodium carbonate (B) Sodium sulphite & sodium carbonate (C) Sodium sulphite & sodium sulphide (D) None of these

Last Answer : (A) Sodium sulphide & sodium carbonate

The average weight of a group of 75 women was calculated as 47 kg. It was later discovered that the weight of one of the women was read as 45 kg, whereas her actual weight was 25kg. What is the actual average weight of the group of 75 women? (rounded off to two digits after decimal) (a) 46.73 kg (b) 46.64 kg (c) 45.96 kg (d) Cannot be determined (e) None of these

Description : The average weight of a group of 75 women was calculated as 47 kg. It was later discovered that the weight of one of the women was read as 45 kg, whereas her actual weight was 25kg. What is the actual average weight ... kg (b) 46.64 kg (c) 45.96 kg (d) Cannot be determined (e) None of these

Last Answer : (a) 46.73 kg

The product (s) of roasting of a sulphide ore is (are) (A) Oxide only (B) Sulphate only (C) Oxide and sulphate (D) Dependent on temperature and partial pressure of oxygen & sulphur dioxide

Description : The product (s) of roasting of a sulphide ore is (are) (A) Oxide only (B) Sulphate only (C) Oxide and sulphate (D) Dependent on temperature and partial pressure of oxygen & sulphur dioxide

Last Answer : (A) Oxide only

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Corrosion in boilers can be prevented by (A) Deaeration of feed water (B) Enhancing pH of feed water by adding alkali (C) Feeding sodium sulphite or hydrazine phosphate to the boilers, which combines with oxygen and prevents corrosion (D) All (A), (B) and (C)

Description : Corrosion in boilers can be prevented by (A) Deaeration of feed water (B) Enhancing pH of feed water by adding alkali (C) Feeding sodium sulphite or hydrazine phosphate to the boilers, which combines with oxygen and prevents corrosion (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Chemical name of Grignard reagent is (A) Sodium thiosulphate (B) Ethyl magnesium chloride (C) Sodium sulphite (D) Sodium bicarbonate

Description : Chemical name of Grignard reagent is (A) Sodium thiosulphate (B) Ethyl magnesium chloride (C) Sodium sulphite (D) Sodium bicarbonate

Last Answer : (B) Ethyl magnesium chloride

Viscose rayon (A) Cannot be made from sulphite pulp (B) Utilises H2SO4 , NaOH and CS2 during its manufacture (C) Cannot yield textile grade fibre (D) None of these

Description : Viscose rayon (A) Cannot be made from sulphite pulp (B) Utilises H2SO4 , NaOH and CS2 during its manufacture (C) Cannot yield textile grade fibre (D) None of these

Last Answer : (B) Utilises H2SO4 , NaOH and CS2 during its manufacture

Bleaching of paper pulp is done with (A) Activated clay (B) Bromine (C) Chlorine or chlorine dioxide (D) Magnesium sulphite

Description : Bleaching of paper pulp is done with (A) Activated clay (B) Bromine (C) Chlorine or chlorine dioxide (D) Magnesium sulphite

Last Answer : (C) Chlorine or chlorine dioxide

Ethyl alcohol cannot be produced (A) From waste sulphite substrate of paper mills (B) By Esterification and hydrolysis of ethylene (C) From molasses (D) None of these

Description : Ethyl alcohol cannot be produced (A) From waste sulphite substrate of paper mills (B) By Esterification and hydrolysis of ethylene (C) From molasses (D) None of these

Last Answer : (D) None of these

A retired zookeeper owned a huge house with a very large and beautifully landscaped yard. The neighbors of the man drove past his home daily, and admired his arrangement of all the large trees and numerous healthy bushes which adorned the front yard. One day, a neighbor drove by the former zookeeper's house, and was astonished to see a living, fully-grown ostrich standing in the yard. A week later, neighbors reported seeing a live, fully-grown bear standing near the ostrich. As the next few weeks passed, the neighbors saw a tiger, a lion, a hippopotamus, and finally an elephant appear in the yard of the retired zookeeper --- all fully- grown and alive, but without any cages or bars to protect the neighborhood from them. Amazingly, not one person who lived in that area ever expressed any fe

Description : A retired zookeeper owned a huge house with a very large and beautifully landscaped yard. The neighbors of the man drove past his home daily, and admired his arrangement of all the large trees and ... from them. Amazingly, not one person who lived in that area ever expressed any fe -Riddles

Last Answer : The retired zookeeper was also a professional topiary expert. Mixing together the best of his two worlds, he sculpted zoo animals from his fully-grown, healthy, living bushes in his front yard, much to the delight of his neighbors.

Pick up the correct statement from the following: (A) The diaphragm is placed between eyepiece and the objective but nearer to the former (B) The diaphragm is placed between the eyepiece and objective but nearer to the later (C) The outer component of the objective is a double-convex lens of crown glass (D) All the above

Description : Pick up the correct statement from the following: (A) The diaphragm is placed between eyepiece and the objective but nearer to the former (B) The diaphragm is placed between the eyepiece and objective ... outer component of the objective is a double-convex lens of crown glass (D) All the above

Last Answer : (D) All the above

Pick out the false statement pertaining to water treatment(A) Aeration of water is effective in CO2removal(B) The zeolite water softening process reduces the hardness of water by notmore than 50%(C) Sodium sulphate or sodium carbonate do not cause hardness in water(D) Water with pH value less than 7, is acidic.

Description : Pick out the false statement pertaining to water treatment. (A) Aeration of water is effective in CO2 removal (B) The zeolite water softening process reduces the hardness of water by not more than 50% (C ... carbonate do not cause hardness in water (D) Water with pH value less than 7, is acidic

Last Answer : (B) The zeolite water softening process reduces the hardness of water by not more than 50%

For a spontaneous process, free energy (A) Is zero (B) Increases (C) Decreases whereas the entropy increases (D) And entropy both decrease

Description : For a spontaneous process, free energy (A) Is zero (B) Increases (C) Decreases whereas the entropy increases (D) And entropy both decrease

Last Answer : C) Decreases whereas the entropy increases

In sulphate pulp manufacture, the pressure and temperature in the digestor is (A) 10 atm., 800 °C (B) 10 atm., 170-180°C (C) 1 atm., 170 - 180°C (D) 1 atm., 800°C

Description : In sulphate pulp manufacture, the pressure and temperature in the digestor is (A) 10 atm., 800 °C (B) 10 atm., 170-180°C (C) 1 atm., 170 - 180°C (D) 1 atm., 800°C

Last Answer : (B) 10 atm., 170-180°C

Air can oxidize sodium sulphite in eq. solution but cannot do so in the case of sodium arsenite. If however, air is passed through a solution containi

Description : Air can oxidize sodium sulphite in eq. solution but cannot do so in the case of sodium arsenite. If however, air is passed through a solution containi

Last Answer : Air can oxidize sodium sulphite in eq. solution but cannot do so in the case of sodium ... Negative catalysis C. Induced catalysis D. Auto catalysis

Acetaldehyde on reaction with sodium hydrogen sulphite produces

Description : Acetaldehyde on reaction with sodium hydrogen sulphite produces

Last Answer : Acetaldehyde on reaction with sodium hydrogen sulphite produces A. B. C. D.

Acetaldehyde on reaction with sodium hydrogen sulphite produces

Description : Acetaldehyde on reaction with sodium hydrogen sulphite produces

Last Answer : Acetaldehyde on reaction with sodium hydrogen sulphite produces A. B. C. D.

`50 mL` of `0.1 M` solution of a salt reacted with `25 mL` of `0.1 M` solution of sodium sulphite. The half reaction for the oxidation of sulphite ion

Description : `50 mL` of `0.1 M` solution of a salt reacted with `25 mL` of `0.1 M` solution of sodium sulphite. The half reaction for the oxidation of sulphite ion

Last Answer : `50 mL` of `0.1 M` solution of a salt reacted with `25 mL` of `0.1 M` solution of sodium ... was `3`, what would be the new oxidation number of metal:

Molybdenum is a cofactor for (A) Xanthine oxidase (B) Aldehyde oxidase (C) Sulphite oxidase (D) All of these

Description : Molybdenum is a cofactor for (A) Xanthine oxidase (B) Aldehyde oxidase (C) Sulphite oxidase (D) All of these

Last Answer : Answer : D

Washing soda is - (1) sodium sulphite (2) sodium bicarbonate (3) sodiun carbonate (4) sodium biosulphite

Description : Washing soda is - (1) sodium sulphite (2) sodium bicarbonate (3) sodiun carbonate (4) sodium biosulphite

Last Answer : (3) sodiun carbonate Explanation: Sodium carbonate (also known as washing soda, soda ash and soda crystals, and in the monohydrate form as crystal carbonate), Na2CO3, is the water-soluble sodium salt of carbonic acid.

The most commonly used chemical for de-chlorination of water, is (A) Sodium thiosulphate (B) Sodium bisulphate (C) Sodium sulphite (D) Sulphur-dioxide

Description : The most commonly used chemical for de-chlorination of water, is  (A) Sodium thiosulphate  (B) Sodium bisulphate  (C) Sodium sulphite  (D) Sulphur-dioxide 

Last Answer : (C) Sodium sulphite 

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

One finds it more difficult to walk on ice than on a concrete road because (a) ice is soft and spongy whereas concrete is hard (b) the friction between the ice and the feet is less than that between the concrete and the feet (c) there is more friction on ice than on concrete (d) it is not true

Description : One finds it more difficult to walk on ice than on a concrete road because (a) ice is soft and spongy whereas concrete is hard (b) the friction between the ice and the feet is less than that between the concrete and the feet (c) there is more friction on ice than on concrete (d) it is not true

Last Answer : Ans:(b)

During dehumidification of unsaturated air wet bulb temperature & partial pressure of vapor are not constant. However, during evaporative cooling process with recirculated water supply, the __________ remains constant. (A) Wet bulb temperature (B) Partial pressure of water vapor (C) Relative humidity (D) None of these

Description : During dehumidification of unsaturated air wet bulb temperature & partial pressure of vapor are not constant. However, during evaporative cooling process with recirculated water supply, the __________ remains ... pressure of water vapor (C) Relative humidity (D) None of these

Last Answer : (A) Wet bulb temperature

Thiols are alcohol analogs in which the oxygen has been replaced by sulfur (e.g., CH3SH). Given the fact that the S–H bond is less polar than the O–H bond, which of the following statements comparing thiols and alcohols is correct? (a) Hydrogen bonding forces are weaker in thiols. (b) Hydrogen bonding forces are stronger in thiols. (c) Hydrogen bonding forces would be the same. (d) No comparison can be made without additional information

Description : Thiols are alcohol analogs in which the oxygen has been replaced by sulfur (e.g., CH3SH). Given the fact that the S-H bond is less polar than the O-H bond, which of the following ... (c) Hydrogen bonding forces would be the same. (d) No comparison can be made without additional information

Last Answer : Hydrogen bonding forces are weaker in thiols.

Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft magnetic materials (C) Soft magnetic materials (e.g., pure iron) have higher permeability and low hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Description : Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft ... hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Last Answer : Option D

C and Si both have same lattice structure, having 4 bonding electrons in each. However, C is insulator where as Si is intrinsic semiconductor. This is because (1) The four bonding electrons in the case of C lie in the third orbit, whereas for Si they lie in the fourth orbit (2) In case of C the valance band is not completely filled at absolute zero temperature (3) In case of C the conduction band is partly filled even at absolute zero temperature (4) The four bonding electrons in the case of C lie in the second orbit, whereas in the case of Si they lie in the third

Description : C and Si both have same lattice structure, having 4 bonding electrons in each. However, C is insulator where as Si is intrinsic semiconductor. This is because (1) The four bonding electrons in the case of C ... the case of C lie in the second orbit, whereas in the case of Si they lie in the third

Last Answer : (4) The four bonding electrons in the case of C lie in the second orbit, whereas in the case of Si they lie in the third

, B, C and D are four digits. Average of A and B are equal to average of C and D. Average of B and D is greater than average of A and B whereas average of A and D is less than average of A and B.Which digit has maximum value?

Description : , B, C and D are four digits. Average of A and B are equal to average of C and D. Average of B and D is greater than average of A and B whereas average of A and D is less than average of A and B.Which digit has maximum value?

Last Answer : D has the maximum value

Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Description : Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C

People living at sea level have around 5 million RBC per cubic millimeter of their blood whereas those living at an altitude to 5400 metres have around 8 million. This is because at high altitude (a) people eat more nutritive food, therefore more RBCs are formed (b) people get pollution-free air to breath and more oxygen is available (c) atmospheric O2 level is less and hence more RBCs are needed to absorb the required amount of O2 to survive (d) there is more UV radiation which enhances RBC production.

Description : People living at sea level have around 5 million RBC per cubic millimeter of their blood whereas those living at an altitude to 5400 metres have around 8 million. This is because at high altitude ... required amount of O2 to survive (d) there is more UV radiation which enhances RBC production.

Last Answer : (c) atmospheric O2 level is less and hence more RBCs are needed to absorb the required amount of O2 to survive

Chromatin has two different regions, euchromatin and heterochromatin. One of these regions is highly condensed and considered an inactive region whereas the other is less condensed so it is more accessible for transcription. Which of these regions would contain genes that are being transcribed often?

Description : Chromatin has two different regions, euchromatin and heterochromatin. One of these regions is highly condensed and considered an inactive region whereas the other is less condensed so it is more ... for transcription. Which of these regions would contain genes that are being transcribed often?

Last Answer : Euchromatin. Euchromatin is less condensly packaged allowing for easier access by transcription factors and polymerases. Heterochromatin is a region of condensed packaging and considered an inactive region.

Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms of permanganate number (C) Bagasse fibre contains both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Description : Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms ... both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Last Answer : (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

In the illustration, the signal from the device connected to terminals 18 and 19 is __________. EL-0046 A. prime mover speed feedback B. loss of control alarm when comparing with the input signal from the resistor at the top of the speed sensing circuit card C. hall effect current to detect slip between the prime mover and the alternator D. to shut down the prime mover if overspeeding

Description : In the illustration, the signal from the device connected to terminals 18 and 19 is __________. EL-0046 A. prime mover speed feedback B. loss of control alarm when comparing with the input signal ... slip between the prime mover and the alternator D. to shut down the prime mover if overspeeding

Last Answer : Answer: A

The electric power generation cost in nuclear power plant is less than that in a coal based thermal power plant, mainly because the (A) Fuel cost per unit power generated is less (B) Thermal efficiency of the former is higher (C) Maintenance cost of the former is less (D) None of these

Description : The electric power generation cost in nuclear power plant is less than that in a coal based thermal power plant, mainly because the (A) Fuel cost per unit power generated is less (B) Thermal efficiency of the former is higher (C) Maintenance cost of the former is less (D) None of these

Last Answer : (A) Fuel cost per unit power generated is less

Absolute viscosity of a fluid is a function of the __________ of the fluid. (A) Motion (B) Pressure & temperature (C) Shearing stress (D) Both (B) & (C)

Description : Absolute viscosity of a fluid is a function of the __________ of the fluid. (A) Motion (B) Pressure & temperature (C) Shearing stress (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

The expression for entropy change, ΔS = n Cp. ln (T2/T1), is valid for the __________ of a substance. (A) Simultaneous pressure & temperature change (B) Heating (C) Cooling (D) Both (B) and (C)

Description : The expression for entropy change, ΔS = n Cp. ln (T2/T1), is valid for the __________ of a substance. (A) Simultaneous pressure & temperature change (B) Heating (C) Cooling (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

For an incompressible fluid, the __________ is a function of both pressure as well as temperature. (A) Internal energy (B) Enthalpy (C) Entropy (D) All (A), (B) & (C)

Description : For an incompressible fluid, the __________ is a function of both pressure as well as temperature. (A) Internal energy (B) Enthalpy (C) Entropy (D) All (A), (B) & (C)

Last Answer : (B) Enthalpy

Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Description : Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Last Answer : (A) Less than

A gas can be liquefied by pressure alone only, when its temperature is __________ its critical temperature. (A) Less than (B) More than (C) Equal to or higher than (D) Less than or equal to

Description : A gas can be liquefied by pressure alone only, when its temperature is __________ its critical temperature. (A) Less than (B) More than (C) Equal to or higher than (D) Less than or equal to

Last Answer : (D) Less than or equal to

One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) comparing the energy consumption C)Controlling the energy consumption d) Reducing the production

Description : One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) comparing the energy consumption C)Controlling the energy consumption d) Reducing the production

Last Answer :  Reducing the production

68. One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) Comparing the energy consumption c) Controlling the energy consumption d) Reducing the production

Description : 68. One of the following is not the element of energy monitoring & targeting system a) Recording the energy consumption b) Comparing the energy consumption c) Controlling the energy consumption d) Reducing the production

Last Answer : Reducing the production

Gibbs free energy (G) is represented by, G = H - TS, whereas Helmholtz free energy, (A) is given by, A = E - TS. Which of the following is the Gibbs Helmholtz equation? (A) [∂(G/T)/∂T] = - (H/T2) (B) [∂(A/T)/∂T]V = - E/T2 (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Gibbs free energy (G) is represented by, G = H - TS, whereas Helmholtz free energy, (A) is given by, A = E - TS. Which of the following is the Gibbs Helmholtz equation? (A) [∂(G/T)/∂T] = - (H/T2) (B) [∂(A/T)/∂T]V = - E/T2 (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)