Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Which of the following is the most suitable for very high pressure gas
phase reaction?
(A) Batch reactor
(B) Tubular flow reactor
(C) Stirred tank reactor
(D) Fluidised bed reactor
by

1 Answer

Answer :

(B) Tubular flow reactor
by

Related questions

For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Description : For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Last Answer : (A) Stirred tank

A back mix reactor is (A) Suitable for gas phase reactions (B) Ideal at very low conversion (C) Same as plug flow reactor (PFR) (D) Same as ideal stirred tank reactor

Description : A back mix reactor is (A) Suitable for gas phase reactions (B) Ideal at very low conversion (C) Same as plug flow reactor (PFR) (D) Same as ideal stirred tank reactor

Last Answer : (D) Same as ideal stirred tank reactor

A backmix reactor (A) Is same as plug-flow reactor (B) Is same as ideal stirred tank reactor (C) Employs mixing in axial direction only (D) Is most suitable for gas phase reaction

Description : A backmix reactor (A) Is same as plug-flow reactor (B) Is same as ideal stirred tank reactor (C) Employs mixing in axial direction only (D) Is most suitable for gas phase reaction

Last Answer : (B) Is same as ideal stirred tank reactor

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Description : A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

For the same residence time, which one will give the maximum conversion? (A) Single stirred tank (v = 5 litres) (B) Two stirred tank (each of 2.5 litres) in series (C) Stirred tank followed by tubular flow reactor (each of 2.5 litres) (D) Single tubular flow reactor (v = 5 litres)

Description : For the same residence time, which one will give the maximum conversion? (A) Single stirred tank (v = 5 litres) (B) Two stirred tank (each of 2.5 litres) in series (C) Stirred tank followed by tubular flow reactor (each of 2.5 litres) (D) Single tubular flow reactor (v = 5 litres)

Last Answer : (D) Single tubular flow reactor (v = 5 litres)

For a fluidised bed reactor, the most suitable/relevant model is a __________ model. (A) Tank in series (B) Bubbling bed (C) Plug flow (D) None of these

Description : For a fluidised bed reactor, the most suitable/relevant model is a __________ model. (A) Tank in series (B) Bubbling bed (C) Plug flow (D) None of these

Last Answer : (B) Bubbling bed

A reactor is generally termed as an autoclave, when it is a (A) High pressure batch reactor (B) Atmospheric pressure tank reactor (C) High pressure tubular reactor (D) Atmospheric pressure CSTR(

Description : A reactor is generally termed as an autoclave, when it is a (A) High pressure batch reactor (B) Atmospheric pressure tank reactor (C) High pressure tubular reactor (D) Atmospheric pressure CSTR

Last Answer : A) High pressure batch reactor

For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a single CSTR for high yield (B) Tubular reactor is preferred over a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Description : For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a ... a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Last Answer : (C) Both (A) and (B)

The conversion XA and residence time data are collected for zero order liquid phase reaction in a stirred tank reactor. Which of the following will be a straight line? (A) XA Vs . τ (B) XA Vs ln τ (C) XA /(1 - XA )Vs τ (D) XA (1 - XA )Vs τ

Description : The conversion XA and residence time data are collected for zero order liquid phase reaction in a stirred tank reactor. Which of the following will be a straight line? (A) XA Vs . τ (B) XA Vs ln τ (C) XA /(1 - XA )Vs τ (D) XA (1 - XA )Vs τ

Last Answer : (A) XA Vs . τ

Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Description : Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Last Answer : (B) Slurry

Backmixing is most predominant in (A) A well stirred batch reactor (B) A plug-flow reactor (C) A single CSTR (D) CSTR's connected in series

Description : Backmixing is most predominant in (A) A well stirred batch reactor (B) A plug-flow reactor (C) A single CSTR (D) CSTR's connected in series

Last Answer : (C) A single CSTR

A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Description : A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Last Answer : (B) Suitable for liquid phase reactions involving small production rate

In a continuous flow stirred tank reactor, the composition of the exit stream (A) Is same as that in the reactor (B) Is different than that in the reactor (C) Depends upon the flow rate of inlet stream (D) None of these

Description : In a continuous flow stirred tank reactor, the composition of the exit stream (A) Is same as that in the reactor (B) Is different than that in the reactor (C) Depends upon the flow rate of inlet stream (D) None of these

Last Answer : (A) Is same as that in the reactor

Which of the following will give maximum gas conversion? (A) Fixed bed reactor (B) Fluidised bed reactor (C) Semi-fluidised bed reactor (D) Plug-flow catalytic reactor

Description : Which of the following will give maximum gas conversion? (A) Fixed bed reactor (B) Fluidised bed reactor (C) Semi-fluidised bed reactor (D) Plug-flow catalytic reactor

Last Answer : (C) Semi-fluidised bed reactor

Which of the following is the most suitable for isothermal operation? (A) Batch reactor (B) Back-mix reactor (C) Plug-flow reactor (D) Fixed bed reactor

Description : Which of the following is the most suitable for isothermal operation? (A) Batch reactor (B) Back-mix reactor (C) Plug-flow reactor (D) Fixed bed reactor

Last Answer : (B) Back-mix reactor

Fluidised bed reactor is characterised by (A) Uniformity of temperature (B) Comparatively smaller equipment (C) Very small pressure drop (D) Absence of continuous catalyst regeneration facility

Description : Fluidised bed reactor is characterised by (A) Uniformity of temperature (B) Comparatively smaller equipment (C) Very small pressure drop (D) Absence of continuous catalyst regeneration facility

Last Answer : (A) Uniformity of temperature

The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Description : The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Last Answer : (B) Ideal tubular-flow reactor

In a fluidised bed reactor (A) Temperature gradients are very high (B) Temperature is more or less uniform (C) Hot spots are formed (D) Segregation of the solids occurs

Description : In a fluidised bed reactor (A) Temperature gradients are very high (B) Temperature is more or less uniform (C) Hot spots are formed (D) Segregation of the solids occurs

Last Answer : (B) Temperature is more or less uniform

For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor. (A) Fixed (B) Fluidised bed reactor followed by a fixed (C) Fixed bed reactor followed by a fluidised (D) Fluidised

Description : For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor. (A) Fixed (B) Fluidised bed reactor followed by a fixed (C) Fixed bed reactor followed by a fluidised (D) Fluidised

Last Answer : (B) Fluidised bed reactor followed by a fixed

Pressure drop in a fluidised bed reactor is __________ that in a similar packed bed reactor. (A) Less than (B) Greater than (C) Same as (D) None of these

Description : Pressure drop in a fluidised bed reactor is __________ that in a similar packed bed reactor. (A) Less than (B) Greater than (C) Same as (D) None of these

Last Answer : (B) Greater than

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

Which of the following is not a batch drier? (A) Truck drier (B) Agitated pan drier (C) Fluidised bed drier (D) Vacuum shelf drier

Description : Which of the following is not a batch drier? (A) Truck drier (B) Agitated pan drier (C) Fluidised bed drier (D) Vacuum shelf drier

Last Answer : (C) Fluidised bed drier

Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, one reactant is charged batch wise, while the other reactant is fed continuously (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Description : Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, ... system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Last Answer : (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system

. In case of a __________ reactor, the composition in the reactor and at the exit of the reactor is the same. (A) Semi-batch(B) Tubular(C) Batch(D) Back-mix

Description : . In case of a __________ reactor, the composition in the reactor and at the exit of the reactor is the same. (A) Semi-batch (B) Tubular (C) Batch (D) Back-mix

Last Answer : (D) Back-mix

A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions(D) Obtaining uniform polymerisation products in highly exothermicreactions

Description : A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions (D) Obtaining uniform polymerisation products in highly exothermic reactions

Last Answer : (C) Liquid phase reactions

Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Description : Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Last Answer : (A) Moving

Which of the following is used for calcination of limestone and dolomite in industrial practice? (A) Fluidised bed reactor (B) Moving bed reactor (C) Fixed bed reactor (D) None of these

Description : Which of the following is used for calcination of limestone and dolomite in industrial practice? (A) Fluidised bed reactor (B) Moving bed reactor (C) Fixed bed reactor (D) None of these

Last Answer : (B) Moving bed reactor

. Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Description : . Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Last Answer : (A) Moving

__________ centrifuge is the most suitable for separation of non-friable crystals. (A) Tubular bowl (B) Disc-bowl (C) Perforated horizontal basket continuous (D) Suspended batch baske

Description : __________ centrifuge is the most suitable for separation of non-friable crystals. (A) Tubular bowl (B) Disc-bowl (C) Perforated horizontal basket continuous (D) Suspended batch baske

Last Answer : (C) Perforated horizontal basket continuous

An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Description : An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Last Answer : (C) Decrease

Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a measure of its capacity and is equal to the residence time when the density of reaction mixture is constant (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty (D) In an ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Description : Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a ... ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Last Answer : (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty

Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Description : Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Description : In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Last Answer : (B) Velocity of reaction can be controlled

In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Description : In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Last Answer : (A) Velocity of reaction can be controlled

Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Description : Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Last Answer : (C) Mixed

Commercial scale production of hydrogen from iron-steam reaction represented by, 3Fe + 3H2O = Fe3O4 + 4H2 , is not practised, as it is (A) A slow reaction (B) A discontinuous reaction (requiring regeneration of iron by water gas intermittently) (C) Still in development stage (by employing fluidised bed technique) (D) All (A), (B) and (C)

Description : Commercial scale production of hydrogen from iron-steam reaction represented by, 3Fe + 3H2O = Fe3O4 + 4H2 , is not practised, as it is (A) A slow reaction (B) A discontinuous reaction (requiring regeneration of ... in development stage (by employing fluidised bed technique) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is an independent variable for a batch tank reactor with uniform concentration and temperature? (A) Time (B) Useful volume of the tank (C) Diameter of the reactor (D) None of these

Description : Which of the following is an independent variable for a batch tank reactor with uniform concentration and temperature? (A) Time (B) Useful volume of the tank (C) Diameter of the reactor (D) None of these

Last Answer : (A) Time

. A batch reactor is characterised by (A) Constant residence time(B) Variation in extent of reaction and properties of the reaction mixture withtime(C) Variation in reactor volume(D) Very low conversion

Description : . A batch reactor is characterised by (A) Constant residence time (B) Variation in extent of reaction and properties of the reaction mixture with time (C) Variation in reactor volume (D) Very low conversion

Last Answer : (B) Variation in extent of reaction and properties of the reaction mixture with time

Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Description : Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Last Answer : (A) Can give ammonia synthesis gas (H2 + N2 )

Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor(C) Cannot use coking coal(D) Operate at very high pressure

Description : Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Last Answer : (A) Can give ammonia synthesis gas (H2 + N2 )

Where the density difference of the two liquid phase to be separated is very small (as in milk cream separator), the most suitable separator is a (A) Disc bowl centrifuge (B) Sharpies super-centrifuge (C) Batch basket centrifuge

Description : Where the density difference of the two liquid phase to be separated is very small (as in milk cream separator), the most suitable separator is a (A) Disc bowl centrifuge (B) Sharpies super-centrifuge (C) Batch basket centrifuge

Last Answer : (A) Disc bowl centrifuge

The power number for a stirred tank becomes constant at high Reynolds number. In this limit, the variation of power input with impeller rotational speed (N) is proportional to (A) N° (B) N 1 (C) N 2 (D) N 3

Description : The power number for a stirred tank becomes constant at high Reynolds number. In this limit, the variation of power input with impeller rotational speed (N) is proportional to (A) N° (B) N 1 (C) N 2 (D) N 3

Last Answer : (C) N

. A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these

Description : . A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these

Last Answer : (A) 4.4 KPa

Advantages of fluidised bed combustion are (A) Reduced NOx formation in flue gas (B) Lower furnace operating temperature (C) High heat transfer rate (D) All (A), (B) & (C)

Description : Advantages of fluidised bed combustion are (A) Reduced NOx formation in flue gas (B) Lower furnace operating temperature (C) High heat transfer rate (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

In an ideal tubular-flow reactor (A) There is no mixing in longitudinal direction (B) Mixing takes place in radial direction (C) There is a uniform velocity across the radius (D) All (A), (B) and (C)

Description : In an ideal tubular-flow reactor (A) There is no mixing in longitudinal direction (B) Mixing takes place in radial direction (C) There is a uniform velocity across the radius (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For a tubular flow reactor with uniform concentration and temperature, the independent variable is (A) Time (B) Length (C) Diameter (D) None of these

Description : For a tubular flow reactor with uniform concentration and temperature, the independent variable is (A) Time (B) Length (C) Diameter (D) None of these

Last Answer : (B) Length

Slugging in a fluidised bed can be avoided by using (A) Tall narrow vessel (B) Deep bed of solids (C) Shallow beds of solids and proper choice of particle size (D) Very large particles

Description : Slugging in a fluidised bed can be avoided by using (A) Tall narrow vessel (B) Deep bed of solids (C) Shallow beds of solids and proper choice of particle size (D) Very large particles

Last Answer : (C) Shallow beds of solids and proper choice of particle size

The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Description : The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Last Answer : (B) 5/8