Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, one reactant is charged batch wise, while the other reactant is fed continuously (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Pick out the wrong statement.
(A) In a batch reactor, which is exclusively used for liquid phase reactions;
temperature pressure and composition may vary with time
(B) In a semi-batch reactor, one reactant is charged batch wise, while the
other reactant is fed continuously
(C) In a continuous flow reactor, uniform concentration cannot be
maintained throughout the vessel even in a well agitated system
(D) In a continuous flow reactor, both the reactants and the products flow out
continuously
by

1 Answer

Answer :

(C) In a continuous flow reactor, uniform concentration cannot be
maintained throughout the vessel even in a well agitated system
by

Related questions

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions(D) Obtaining uniform polymerisation products in highly exothermicreactions

Description : A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions (D) Obtaining uniform polymerisation products in highly exothermic reactions

Last Answer : (C) Liquid phase reactions

Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Description : In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Last Answer : (A) Velocity of reaction can be controlled

Velocity of a chemical reaction (A) Decreases with increase in temperature (B) Increases with increase of pressure of reactants for all reactions (C) Decreases with increase of reactant concentration (D) None of these

Description : Velocity of a chemical reaction (A) Decreases with increase in temperature (B) Increases with increase of pressure of reactants for all reactions (C) Decreases with increase of reactant concentration (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same (D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Description : Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence ... D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Last Answer : (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same

In an ideal P.F.R. at steady state conditions (A) The composition of reactants remains constant along a flow path (B) The conversion of the reactant varies from point to point along a flow path (C) There is no lateral mixing of fluid (D) There may be diffusion along the flow path

Description : In an ideal P.F.R. at steady state conditions (A) The composition of reactants remains constant along a flow path (B) The conversion of the reactant varies from point to point along a flow path (C) There is no lateral mixing of fluid (D) There may be diffusion along the flow path

Last Answer : (B) The conversion of the reactant varies from point to point along a flow path

The most unsuitable reactor for carrying out reactions in which high reactant concentration favours high yields is (A) Backmix reactor (B) Plug flow reactor (C) Series of CSTR (D) PFR in series

Description : The most unsuitable reactor for carrying out reactions in which high reactant concentration favours high yields is (A) Backmix reactor (B) Plug flow reactor (C) Series of CSTR (D) PFR in series

Last Answer : A) Backmix reactor

Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of feed at specified conditions are being fed into the reactor every hour (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Description : Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of ... one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Last Answer : (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor

Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate or larger amounts of data (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order (D) The ratio of volumes of plug flow reactor to that of mixed reactor is always less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Description : Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate ... less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Last Answer : (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order

. In case of a __________ reactor, the composition in the reactor and at the exit of the reactor is the same. (A) Semi-batch(B) Tubular(C) Batch(D) Back-mix

Description : . In case of a __________ reactor, the composition in the reactor and at the exit of the reactor is the same. (A) Semi-batch (B) Tubular (C) Batch (D) Back-mix

Last Answer : (D) Back-mix

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

Which of the following is an independent variable for a batch tank reactor with uniform concentration and temperature? (A) Time (B) Useful volume of the tank (C) Diameter of the reactor (D) None of these

Description : Which of the following is an independent variable for a batch tank reactor with uniform concentration and temperature? (A) Time (B) Useful volume of the tank (C) Diameter of the reactor (D) None of these

Last Answer : (A) Time

A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Description : A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Last Answer : (B) Suitable for liquid phase reactions involving small production rate

Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a measure of its capacity and is equal to the residence time when the density of reaction mixture is constant (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty (D) In an ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Description : Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a ... ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Last Answer : (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty

Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time requiredto reduce the concentration of reactant from 100 gm moles/litre to 50 gmmoles/litre is same as that required to reduce it from 2 gm moles/litre to 1gm mole/litre in the same volume. Then the order of this reaction is:(A) 0(B) 1(C) 2(D) 3

Description : Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time required to ... Then the order of this reaction is: (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (B) 1

A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) Decreases (B) Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Description : A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) ... Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Last Answer : (C) Is at the highest allowable temperature throughout

In batch distillation with constant reflux, overhead product composition __________ with time. (A) Increases (B) Decreases (C) Does not vary (D) May increase on decrease, depends on the system

Description : In batch distillation with constant reflux, overhead product composition __________ with time. (A) Increases (B) Decreases (C) Does not vary (D) May increase on decrease, depends on the system

Last Answer : (B) Decreases

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Description : For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Last Answer : (A) Stirred tank

A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are being withdrawn and feed to the column is stopped). At the new steady state, (A) Composition of vapors and that of liquid do not vary throughout the column (B) Reboiler load and condenser load are minimum (C) The top and bottom compositions are unchanged with and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Description : A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are ... and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Last Answer : (D) The top and bottom compositions correspond to the maximum enrichment available

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Description : In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Last Answer : (B) Velocity of reaction can be controlled

Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of the reacting molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction

Description : Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of ... molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction

Last Answer : (C) A catalyst lowers the activation energy of the reacting molecules

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

Pick out the correct statement about the condensation. (A) Filmwise condensation gives a lower heat transfer rate than the dropwise condensation (B) Suitable coating or vapour additive is used to promote film wise condensation (C) If a condensing liquid does not wet the surface dropwise, even then condensation will take place on it (D) Reynolds number of condensing liquid is based on its mass flow rate

Description : Pick out the correct statement about the condensation. (A) Filmwise condensation gives a lower heat transfer rate than the dropwise condensation (B) Suitable coating or vapour additive is used to promote film ... place on it (D) Reynolds number of condensing liquid is based on its mass flow rate

Last Answer : (B) Suitable coating or vapour additive is used to promote film wise condensation

Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the determination of catalyst surface area and pore size distribution (C) A higher temperature favours the reaction of higher activation energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Description : Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the ... energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Last Answer : (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature (C) The relative volatility of a binary mixture at Azeotropic composition is unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Description : Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in ... unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Last Answer : (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature

Semibatch reactor is preferred, when a/an (A) A highly exothermic reaction is to be controlled (B) Undesirable side reaction (at high concentration of one of the reactants) is to be avoided (C) A gas is to be reacted with liquid (e.g. hydrogenation of fat) (D) All (A), (B), and (C

Description : Semibatch reactor is preferred, when a/an (A) A highly exothermic reaction is to be controlled (B) Undesirable side reaction (at high concentration of one of the reactants) is to be avoided (C) A gas is to be reacted with liquid (e.g. hydrogenation of fat) (D) All (A), (B), and (C

Last Answer : (D) All (A), (B), and (C

For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst can cause the conversion of large amount of reactants which does not mean that catalyst concentration is important (C) The catalyst does not form an intermediate complex with the reactant (D) The surface of the catalyst does not play an important role during reaction

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction

The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Description : The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Last Answer : (B) Continuously decreases

Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Description : Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Last Answer : (B) Tubular flow reactor

Pick out the wrong statement. (A) ****, *** & Vodka are prepared by the formulation of fruit juice, sugar beet & rye respectively (B) Protein catalysts are called enzymes (C) The rate of chemical reaction is independent of the concentration of reactants at high concentration of enzymes (D) Total sugar content in molasses is about 10%

Description : Pick out the wrong statement. (A) Wine, rum & Vodka are prepared by the formulation of fruit juice, sugar beet & rye respectively (B) Protein catalysts are called enzymes (C) The rate ... concentration of reactants at high concentration of enzymes (D) Total sugar content in molasses is about 10%

Last Answer : (D) Total sugar content in molasses is about 10%

In a continuous flow stirred tank reactor, the composition of the exit stream (A) Is same as that in the reactor (B) Is different than that in the reactor (C) Depends upon the flow rate of inlet stream (D) None of these

Description : In a continuous flow stirred tank reactor, the composition of the exit stream (A) Is same as that in the reactor (B) Is different than that in the reactor (C) Depends upon the flow rate of inlet stream (D) None of these

Last Answer : (A) Is same as that in the reactor

For a tubular flow reactor with uniform concentration and temperature, the independent variable is (A) Time (B) Length (C) Diameter (D) None of these

Description : For a tubular flow reactor with uniform concentration and temperature, the independent variable is (A) Time (B) Length (C) Diameter (D) None of these

Last Answer : (B) Length

(4) Water drops in a dispersion medium of air Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed phase (or internal phase) and a continuous phase (or dispersion medium) in which the colloid is dispersed. A colloidal system may be solid, liquid, or gas. Cloud is a colloidal dispersion of Water drops in a dispersion medium of air.

Description : (4) Water drops in a dispersion medium of air Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... or gas. Cloud is a colloidal dispersion of Water drops in a dispersion medium of air.

Last Answer : Conduction band electrons have more mobility than holes because they – (1) are lighter (2) experience collision less frequently (3) have negative charge (4) need less energy to move them

(2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed phase (or internal phase) and a continuous phase (or dispersion medium) in which the colloid is dispersed. A colloidal system may be solid, liquid, or gas. Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Description : (2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Last Answer : The presence of ozone in the stratosphere is responsible for – (1) increasing the average global temperature in recent years (2) higher rate of photosynthesis (3) checking the penetration of ultra-violet rays to the earth (4) supplying oxygen for people travelling in jets

(2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed phase (or internal phase) and a continuous phase (or dispersion medium) in which the colloid is dispersed. A colloidal system may be solid, liquid, or gas. Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Description : (2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Last Answer : The presence of ozone in the stratosphere is responsible for – (1) increasing the average global temperature in recent years (2) higher rate of photosynthesis (3) checking the penetration of ultra-violet rays to the earth (4) supplying oxygen for people travelling in jets

A space velocity of 5 hr -1 means that (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour (B) After every 5 hours, reactor is being filled with the feed (C) Cent per cent conversion can be achieved in at least 5 hours (D) A fixed conversion of a given batch of feed takes 5 hours

Description : A space velocity of 5 hr -1 means that (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour (B) After every 5 hours, reactor is being filled with the feed ... be achieved in at least 5 hours (D) A fixed conversion of a given batch of feed takes 5 hours

Last Answer : (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour

A trickle bed reactor is the one, which (A) Has altogether three streams either entering or leaving (B) Processes three reactants at different flow rates (C) Processes three reactants with same flow rate (D) Employs all the three phases (i.e. solid, liquid and gas)

Description : A trickle bed reactor is the one, which (A) Has altogether three streams either entering or leaving (B) Processes three reactants at different flow rates (C) Processes three reactants with same flow rate (D) Employs all the three phases (i.e. solid, liquid and gas)

Last Answer : (D) Employs all the three phases (i.e. solid, liquid and gas)

Pick out the wrong statement. (A) Visible radiation provides the necessary activation energy in photochemical reactions (B) The order and molecularity of a complex reaction may not be the same (C) For a second order reaction, the slope of the graph/plot between rate and (concentration) is equal to the rate constant (k) (D) Molecularity of the reaction is always a whole number greater than zero

Description : Pick out the wrong statement. (A) Visible radiation provides the necessary activation energy in photochemical reactions (B) The order and molecularity of a complex reaction may not be the same (C) For ... rate constant (k) (D) Molecularity of the reaction is always a whole number greater than zero

Last Answer : (B) The order and molecularity of a complex reaction may not be the same

In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) Discharge of water by a centrifugal pump being run at a constant rpm (B) Water flow in the suction and discharge pipe of a reciprocating pump (C) Water discharge from a vertical vessel in which constant level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Description : In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) ... level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Last Answer : (B) Water flow in the suction and discharge pipe of a reciprocating pump

According to Bernoulli's equation for steady ideal fluid flow (A) Principle of conservation of mass holds (B) Velocity and pressure are inversely proportional (C) Total energy is constant throughout (D) The energy is constant along a streamline but may vary across streamlines

Description : According to Bernoulli's equation for steady ideal fluid flow (A) Principle of conservation of mass holds (B) Velocity and pressure are inversely proportional (C) Total energy is constant throughout (D) The energy is constant along a streamline but may vary across streamlines

Last Answer : Answer: Option D

Burning of Gasoline initially requires heat before it burns spontaneously. Which of the following does not give a good explanation of this phenomenon?  a. the initial heat rises the enthalpy of the reactant  b. the initial heat lowers the activation of energy of the reactants  c. the enthalpy of reactants is lower than the enthalpy of products.  d. The enthalpy of the product is lower than the enthalpy of the reactant

Description : Burning of Gasoline initially requires heat before it burns spontaneously. Which of the following does not give a good explanation of this phenomenon?  a. the initial heat rises the enthalpy of the reactant ... of products.  d. The enthalpy of the product is lower than the enthalpy of the reactant

Last Answer : the enthalpy of reactants is lower than the enthalpy of products.

Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in a reaction involving many steps is the fastest step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Description : Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in ... step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Last Answer : (A) A lower temperature favours the reaction of lower activation energy

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A process is irreversible as long as Δ S for the system is greater than zero (C) The mechanical work done by a system is always equal to∫P.dV (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants