Pump used for the transportation of molten sodium in a fast breader reactor is a/an __________ pump. (A) Reciprocating (B) Plunger (C) Electromagnetic (D) Gear

Pump used for the transportation of molten sodium in a fast breader
reactor is a/an __________ pump.
(A) Reciprocating
(B) Plunger
(C) Electromagnetic
(D) Gear
by

1 Answer

Answer :

(C) Electromagnetic
by

Related questions

The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Description : The type of pump used for the recirculation of molten sodium coolant in liquid metal cooled reactor is a/an __________ pump. (A) Electromagnetic (B) Reciprocating (C) Centrifugal (D) Volute

Last Answer : (A) Electromagnetic

The type of pump used for lifting large quantity of sewage is a __________ pump. (A) Gear (B) Centrifugal (C) Reciprocating (D) Plunger

Description : The type of pump used for lifting large quantity of sewage is a __________ pump. (A) Gear (B) Centrifugal (C) Reciprocating (D) Plunger

Last Answer : (B) Centrifugal

Molten soap mass is transported by a __________ pump. (A) Diaphragm (B) Reciprocating (C) Gear (D) Centrifugal

Description : Molten soap mass is transported by a __________ pump. (A) Diaphragm (B) Reciprocating (C) Gear (D) Centrifugal

Last Answer : (D) Centrifugal

Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Description : Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Last Answer : (C) Thick molten soap at 80°C

Which of the following is the most common pump for pumping either raw sewage or sludge? (A) Electromagnetic pump (B) Centrifugal pump (C) Reciprocating pump(D) Gear pump

Description : Which of the following is the most common pump for pumping either raw sewage or sludge? (A) Electromagnetic pump (B) Centrifugal pump (C) Reciprocating pump (D) Gear pump

Last Answer : (C) Reciprocating pump

Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Description : Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an __________ reactor. (A) Homogeneous (B) Graphite moderated (C) Fast breeder (D) Enriched uranium (3% U-235) fuelled

Last Answer : (C) Fast breeder

Boiler feed water pump is usually a __________ pump.(A) Reciprocating (B) Gear (C) Multistage centrifugal (D) Diaphragm

Description : Boiler feed water pump is usually a __________ pump. (A) Reciprocating (B) Gear (C) Multistage centrifugal (D) Diaphragm

Last Answer : (C) Multistage centrifugal

Maintenance cost of a __________ pump for a particular duty is the least. (A) Centrifugal (B) Reciprocating (C) Volute (D) Gear

Description : Maintenance cost of a __________ pump for a particular duty is the least. (A) Centrifugal (B) Reciprocating (C) Volute (D) Gear

Last Answer : (A) Centrifugal

For the transfer of solution of thick slurry, the pump used is a __________ pump(A) Reciprocating(B) Gear(C) Diaphragm(D) Centrifugal.

Description : For the transfer of solution of thick slurry, the pump used is a __________ pump. (A) Reciprocating (B) Gear (C) Diaphragm (D) Centrifugal

Last Answer : (C) Diaphragm

Priming is needed in a __________ pump. (A) Reciprocating (B) Gear (C) Centrifugal (D) Diaphragm

Description : Priming is needed in a __________ pump. (A) Reciprocating (B) Gear (C) Centrifugal (D) Diaphragm

Last Answer : (C) Centrifugal

Slurries can be most conveniently pumped by a __________ pump. (A) Screw (B) Reciprocating (C) Gear (D) Centrifuga

Description : Slurries can be most conveniently pumped by a __________ pump. (A) Screw (B) Reciprocating (C) Gear (D) Centrifuga

Last Answer : (D) Centrifuga

Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Description : Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Last Answer : (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water

A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Description : A fast breeder reactor (A) Utilises fast neutrons for causing fission (B) Converts fertile material (e.g., U-238) into fissile material (Pu-239) (C) Normally employs molten sodium as coolant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Description : Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Last Answer : (C) Faster heat removal capability from the core

Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core(C) Lowering the coolant circulation pressure(D) Avoiding the mixing of water with radioactive sodium, as it may causeexplosion

Description : Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core (C) ... circulation pressure (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Last Answer : (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

A fast breeder reactor employs (A) Graphite as moderator (B) Water as coolant (C) Molten sodium as coolant as well as moderator (D) U-235 as fuel

Description : A fast breeder reactor employs (A) Graphite as moderator (B) Water as coolant (C) Molten sodium as coolant as well as moderator (D) U-235 as fuel

Last Answer : (D) U-235 as fuel

Coolant used in a fast breeder reactor is (A) Molten sodium (B) Heavy water (C) Ordinary water (D) Helium

Description : Coolant used in a fast breeder reactor is (A) Molten sodium (B) Heavy water (C) Ordinary water (D) Helium

Last Answer : (A) Molten sodium

Which of the following has the lowest Prandtl number? (A) Molten sodium (a coolant used in fast breeder reactor) (B) Water (C) Transformer oil (D) Dilute H2SO4

Description : Which of the following has the lowest Prandtl number? (A) Molten sodium (a coolant used in fast breeder reactor) (B) Water (C) Transformer oil (D) Dilute H2SO4

Last Answer : (A) Molten sodium (a coolant used in fast breeder reactor)

Continuous injection system usually has a) plunger pump b) rotary pump c) gear pump d) vane pump

Description : Continuous injection system usually has a) plunger pump b) rotary pump c) gear pump d) vane pump

Last Answer : Answer: b Explanation: In common use continuous injection system usually has rotary pump.

The pump used in airplane sprayers: A. Dentrifugal and gear pump B. Gear and Diaphragm pump C. Diaphragm and centrifugal pump D. Plunger and centrifugal pump

Description : The pump used in airplane sprayers: A. Dentrifugal and gear pump B. Gear and Diaphragm pump C. Diaphragm and centrifugal pump D. Plunger and centrifugal pump

Last Answer : Dentrifugal and gear pump

he pump is used in power-operated sprayer is: A. Plunger type B. Diaphragm type C. Gear type D. Piston type

Description : The pump is used in power-operated sprayer is: A. Plunger type B. Diaphragm type C. Gear type D. Piston type

Last Answer : Gear type

Which of the following is used for pumping crude oil from oil well? (A) Single stage centrifugal pump (B) Gear pump (C) Screw pump (D) Duplex/triplex reciprocating pump

Description : Which of the following is used for pumping crude oil from oil well? (A) Single stage centrifugal pump (B) Gear pump (C) Screw pump (D) Duplex/triplex reciprocating pump

Last Answer : (D) Duplex/triplex reciprocating pump

Which of the following is most prone to pulsating discharge flow? (A) Centrifugal pump(B) Reciprocating pump(C) Gear pump(D) Axial flow pump

Description : Which of the following is most prone to pulsating discharge flow? (A) Centrifugal pump (B) Reciprocating pump (C) Gear pump (D) Axial flow pump

Last Answer : (C) Gear pump

Draining of shallow pits or sump is done by a sump pump, which is a __________ pump. (A) Single stage vertical (B) Centrifugal (C) Plunger (D) Diffuser

Description : Draining of shallow pits or sump is done by a sump pump, which is a __________ pump. (A) Single stage vertical (B) Centrifugal (C) Plunger (D) Diffuser

Last Answer : (A) Single stage vertical

Medium viscosity lubricating oil can be most ideally pumped by a __________ pump. (A) Vane (B) Piston (C) Centrifugal (D) Plunger

Description : Medium viscosity lubricating oil can be most ideally pumped by a __________ pump. (A) Vane (B) Piston (C) Centrifugal (D) Plunger

Last Answer : (A) Vane

__________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Description : __________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Last Answer : (C) Plunger

Use of molten metal as a coolant in fast breeder reactor helps in (A) Rapid heat transfer from the core (B) Accelerating the reaction rate in the core (C) Breeding neutrons (D) Accelerating the neutrons

Description : Use of molten metal as a coolant in fast breeder reactor helps in (A) Rapid heat transfer from the core (B) Accelerating the reaction rate in the core (C) Breeding neutrons (D) Accelerating the neutrons

Last Answer : (A) Rapid heat transfer from the core

Which of the following reactors is operated at high neutron flux and low power level? (A) Breeder reactor (B) Research reactor (C) Heterogeneous reactor (D) Liquid metal (e.g., molten sodium) cooled reactor

Description : Which of the following reactors is operated at high neutron flux and low power level? (A) Breeder reactor (B) Research reactor (C) Heterogeneous reactor (D) Liquid metal (e.g., molten sodium) cooled reactor

Last Answer : (B) Research reactor

Which of the following is not used as a moderator in nuclear reactor? (A) Molten sodium (B) Light water (C) Beryllium (D) Boron hydride

Description : Which of the following is not used as a moderator in nuclear reactor? (A) Molten sodium (B) Light water (C) Beryllium (D) Boron hydride

Last Answer : (A) Molten sodium

_________ nuclear reactor does not require a heat exchanger tosupply steam to power turbine.(A) Molten sodium cooled(B) Helium cooled(C) Boiling water(D) Pressurised water

Description : _________ nuclear reactor does not require a heat exchanger tosupply steam to power turbine. (A) Molten sodium cooled (B) Helium cooled (C) Boiling water (D) Pressurised water

Last Answer : (C) Boiling water

Heavy water is used as a moderator in a (A) Pressurised water reactor (PWR) (B) Boiling water reactor (BWR) (C) Candu reactor (D) Molten sodium cooled reactor

Description : Heavy water is used as a moderator in a (A) Pressurised water reactor (PWR) (B) Boiling water reactor (BWR) (C) Candu reactor (D) Molten sodium cooled reactor

Last Answer : (C) Candu reactor

Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Description : Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Last Answer : (D) Boiling water reactor

Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Description : Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Last Answer : (D) Boiling water

Fast breeder reactors do not (A) Use Th-232 as fissile fuel (B) Convert fertile material to fissile material (C) Use fast neutrons for fission (D) Use molten sodium as coolant

Description : Fast breeder reactors do not (A) Use Th-232 as fissile fuel (B) Convert fertile material to fissile material (C) Use fast neutrons for fission (D) Use molten sodium as coolant

Last Answer : (A) Use Th-232 as fissile fuel

For pumping slurry, one can use a __________ pump. (A) Reciprocating (B) Diaphragm (C) Centrifugal (D) Pneumatic

Description : For pumping slurry, one can use a __________ pump. (A) Reciprocating (B) Diaphragm (C) Centrifugal (D) Pneumatic

Last Answer : (B) Diaphragm

To handle smaller quantity of fluid at higher discharge pressure, use a __________ pump. (A) Reciprocating (B) Centrifugal (C) Volute (D) Rotary vacuum

Description : To handle smaller quantity of fluid at higher discharge pressure, use a __________ pump. (A) Reciprocating (B) Centrifugal (C) Volute (D) Rotary vacuum

Last Answer : (A) Reciprocating

The __________ of a double acting reciprocating pump as compared to the single acting pump will be almost double. (A) Flow output (B) Head developed (C) Overall efficiency (D) Weight

Description : The __________ of a double acting reciprocating pump as compared to the single acting pump will be almost double. (A) Flow output (B) Head developed (C) Overall efficiency (D) Weight

Last Answer : Option A

A hydraulic accumulator comprises of (A) A storage device and a control valve (B) A cylinder and a plunger (C) Two pistons and two cylinders (D) A storage tank and a ram pump

Description : A hydraulic accumulator comprises of (A) A storage device and a control valve (B) A cylinder and a plunger (C) Two pistons and two cylinders (D) A storage tank and a ram pump

Last Answer : (B) A cylinder and a plunger

Bucket type sprayer consist of: i) Single and double acting pump c) Plunger type pump j) Centrifugal pump d) All are correct

Description : Bucket type sprayer consist of: i) Single and double acting pump c) Plunger type pump j) Centrifugal pump d) All are correct

Last Answer : Single and double acting pump

Bucket type sprayer consist of: A. Single and double acting pump B. Centrifugal pump C. Plunger type pump D. All are correct

Description : Bucket type sprayer consist of: A. Single and double acting pump B. Centrifugal pump C. Plunger type pump D. All are correct

Last Answer : Single and double acting pump

Crude oil is pumped by a __________ pump. (A) Gear (B) Centrifugal

Description : Crude oil is pumped by a __________ pump. (A) Gear (B) Centrifugal

Last Answer : (B) Centrifugal

Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Description : Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Last Answer : (B) Gear

Air vessel provided in a reciprocating pump is for (A) Increasing the acceleration head (B) Making the friction in pipe uniform (C) Decreasing the acceleration head (D) None of these

Description : Air vessel provided in a reciprocating pump is for (A) Increasing the acceleration head (B) Making the friction in pipe uniform (C) Decreasing the acceleration head (D) None of these

Last Answer : (B) Making the friction in pipe uniform

Air vessel provided in a reciprocating pump (A) Smoothens the flow by avoiding pulsations (B) Increases the volumetric efficiency of the pump (C) Saves the pump from the danger of cavitation (D) None of these

Description : Air vessel provided in a reciprocating pump (A) Smoothens the flow by avoiding pulsations (B) Increases the volumetric efficiency of the pump (C) Saves the pump from the danger of cavitation (D) None of these

Last Answer : (D) None of these

For a reciprocating pump, the indicator diagram is the graph between the (A) Discharge and overall efficiency (B) Volume swept by piston for one complete revolution and the pressure in the cylinder (C) Angle swept by the crank pin at any instant and the discharge (D) None of these

Description : For a reciprocating pump, the indicator diagram is the graph between the (A) Discharge and overall efficiency (B) Volume swept by piston for one complete revolution and the pressure in the cylinder (C) Angle swept by the crank pin at any instant and the discharge (D) None of these

Last Answer : (B) Volume swept by piston for one complete revolution and the pressure in the cylinder

A double acting reciprocating pump compared to a single acting pump (of almost same size working under same pressure levels) would give almost double (A) Head (B) Discharge (C) Efficiency (D) None of these

Description : A double acting reciprocating pump compared to a single acting pump (of almost same size working under same pressure levels) would give almost double (A) Head (B) Discharge (C) Efficiency (D) None of these

Last Answer : (B) Discharge

Reciprocating pumps are not able to compete with the centrifugal pump for industrial use, mainly because these pumps have (A) Very low speeds (B) Smaller discharge (C) Higher capital &maintenance cost (D) High vibrations

Description : Reciprocating pumps are not able to compete with the centrifugal pump for industrial use, mainly because these pumps have (A) Very low speeds (B) Smaller discharge (C) Higher capital &maintenance cost (D) High vibrations

Last Answer : (C) Higher capital &maintenance cost

Acceleration head in a reciprocating pump (A) Increases the work done during delivery stroke (B) Decreases the work done during suction stroke (C) Does not change the work requirement of the pump (D) Increases the work done during suction stroke

Description : Acceleration head in a reciprocating pump (A) Increases the work done during delivery stroke (B) Decreases the work done during suction stroke (C) Does not change the work requirement of the pump (D) Increases the work done during suction stroke

Last Answer : (C) Does not change the work requirement of the pump

At what value of crank angle (roughly), no flow of water from or into the air vessel takes place in case of a double acting reciprocating pump? (A) 40° and 140° (B) 45° and 60° (C) 90° and 80° (D) 20° and 120°

Description : At what value of crank angle (roughly), no flow of water from or into the air vessel takes place in case of a double acting reciprocating pump? (A) 40° and 140° (B) 45° and 60° (C) 90° and 80° (D) 20° and 120°

Last Answer : (A) 40° and 140