Continuous injection system usually has a) plunger pump b) rotary pump c) gear pump d) vane pump

Continuous injection system usually has a) plunger pump b) rotary pump c) gear pump d) vane pump
by

1 Answer

Answer :

Answer: b Explanation: In common use continuous injection system usually has rotary pump.
by
selected by

Related questions

Medium viscosity lubricating oil can be most ideally pumped by a __________ pump. (A) Vane (B) Piston (C) Centrifugal (D) Plunger

Description : Medium viscosity lubricating oil can be most ideally pumped by a __________ pump. (A) Vane (B) Piston (C) Centrifugal (D) Plunger

Last Answer : (A) Vane

__________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Description : __________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Last Answer : (C) Plunger

In _____________ injection system only one pump is sufficient for multi-cylinder engine. a) air b) mechanical c) compression fuel d) common rail

Description : In _____________ injection system only one pump is sufficient for multi-cylinder engine. a) air b) mechanical c) compression fuel d) common rail

Last Answer : Answer: d Explanation: None.

Mixing of air and fuel in the diesel engine occurs in a. injection pump b. carburetor c. engine cylinder d. inlet manifold

Description : Mixing of air and fuel in the diesel engine occurs in a. injection pump b. carburetor c. engine cylinder d. inlet manifold

Last Answer : ANSWER c. engine cylinder

Pump used for the transportation of molten sodium in a fast breader reactor is a/an __________ pump. (A) Reciprocating (B) Plunger (C) Electromagnetic (D) Gear

Description : Pump used for the transportation of molten sodium in a fast breader reactor is a/an __________ pump. (A) Reciprocating (B) Plunger (C) Electromagnetic (D) Gear

Last Answer : (C) Electromagnetic

The type of pump used for lifting large quantity of sewage is a __________ pump. (A) Gear (B) Centrifugal (C) Reciprocating (D) Plunger

Description : The type of pump used for lifting large quantity of sewage is a __________ pump. (A) Gear (B) Centrifugal (C) Reciprocating (D) Plunger

Last Answer : (B) Centrifugal

The pump used in airplane sprayers: A. Dentrifugal and gear pump B. Gear and Diaphragm pump C. Diaphragm and centrifugal pump D. Plunger and centrifugal pump

Description : The pump used in airplane sprayers: A. Dentrifugal and gear pump B. Gear and Diaphragm pump C. Diaphragm and centrifugal pump D. Plunger and centrifugal pump

Last Answer : Dentrifugal and gear pump

he pump is used in power-operated sprayer is: A. Plunger type B. Diaphragm type C. Gear type D. Piston type

Description : The pump is used in power-operated sprayer is: A. Plunger type B. Diaphragm type C. Gear type D. Piston type

Last Answer : Gear type

If the steering stand selector switch is allowed to remain in the 'Non-Followup' mode after testing of the steering gear, the rudder will _____________. EL-0097 A. not respond to commands from the helm B. move in one direction only regardless of the movement of the helm C. not respond to output from the rotary actuator D. stop moving only when the helm is counter-rotated to put the pump at neutral stroke

Description : If the steering stand selector switch is allowed to remain in the 'Non-Followup' mode after testing of the steering gear, the rudder will _____________. EL-0097 A. not respond to commands from the ... actuator D. stop moving only when the helm is counter-rotated to put the pump at neutral stroke

Last Answer : Answer: A

Capacity of a rotary gear pump can be varied by (A) Changing the speed of rotation (B) Bleeding air into suction (C) Bypassing liquid from the suction or discharge line (D) All (A), (B) and (C)

Description : Capacity of a rotary gear pump can be varied by (A) Changing the speed of rotation (B) Bleeding air into suction (C) Bypassing liquid from the suction or discharge line (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Removal of air from the pipeline is termed as ____________ in injection system. a) bleeding b) wound c) sweating d) none of the mentioned

Description : Removal of air from the pipeline is termed as ____________ in injection system. a) bleeding b) wound c) sweating d) none of the mentioned

Last Answer : Answer: a Explanation: Generally, the removal of air from the pipeline is termed as bleeding in injection system.

Common rail injection system uses injection pressures of the order a) 100-200 bar b) 200-400 bar c) 400-600 bar d) 1500 bar

Description : Common rail injection system uses injection pressures of the order a) 100-200 bar b) 200-400 bar c) 400-600 bar d) 1500 bar

Last Answer : Answer: d Explanation: Generally, common rail injection system uses injection pressures of the order 1500 bar.

D-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Description : D-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Last Answer : Answer: b Explanation: D-MPFI system uses direct injection and L-MPFI system uses port injection while multipoint fuel injection system uses port injection and throttle body injection.

L-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Description : L-MPFI system uses a) port injection b) direct injection c) manifold injection d) throttle body injection

Last Answer : Answer: a Explanation: L-MPFI system uses port injection while multi-point fuel injection system uses port injection and throttle body injection while D-MPFI system uses direct injection.

Solid injection in CI engine means injection of A. solid fuel only B. liquid fuel only C. liquid fuel and air D. solid fuel and air

Description : Solid injection in CI engine means injection of A. solid fuel only B. liquid fuel only C. liquid fuel and air D. solid fuel and air

Last Answer : ANSWER : B

Solid injection is also called ________________ a) air injection b) mechanical injection c) compression fuel injection d) none of the mentioned

Description : Solid injection is also called ________________ a) air injection b) mechanical injection c) compression fuel injection d) none of the mentioned

Last Answer : Answer: b Explanation: Generally, solid injection is also called mechanical injection.

The methods used on fuel injection are : a) air injection b) mechanical injection c) solid fuel injection d) all of the mentioned

Description : The methods used on fuel injection are : a) air injection b) mechanical injection c) solid fuel injection d) all of the mentioned

Last Answer : Answer: d Explanation: The methods used on fuel injection are air injection, mechanical injection and solid fuel injection.

In electronic fuel injection, there is improvement in the _____________ efficiency due to comparatively less resistance in the intake manifolds which will cause less pressure losses. a) mechanical b) volumetric c) overall d) none of the mentioned

Description : In electronic fuel injection, there is improvement in the _____________ efficiency due to comparatively less resistance in the intake manifolds which will cause less pressure losses. a) mechanical b) volumetric c) overall d) none of the mentioned

Last Answer : Answer: b Explanation: In electronic fuel injection, there is improvement only in the volumetric efficiency due to comparatively less resistance in the intake manifolds which will cause less pressure losses and no other efficiencies are hindered.

The _____________ sensor, senses rotation of engine camshaft for speed and timing of injection. a) throttle position b) manifold pressure c) camshaft position d) knock

Description : The _____________ sensor, senses rotation of engine camshaft for speed and timing of injection. a) throttle position b) manifold pressure c) camshaft position d) knock

Last Answer : Answer: c Explanation: The camshaft position sensor, senses rotation of engine camshaft for speed and timing of injection whereas the throttle position sensor, senses the movement of the throttle ... engine intake manifold so that the mixture strength can be adjusted with changes in engine load.

With EFI of diesel engines a) sharp start and stop is not possible b) very high injection pressure can be obtained c) sudden cylinder cut-off is impossible d) diagnostic properties are poor

Description : With EFI of diesel engines a) sharp start and stop is not possible b) very high injection pressure can be obtained c) sudden cylinder cut-off is impossible d) diagnostic properties are poor

Last Answer : Answer: b Explanation: Generally, with EFI of diesel engines very high injection pressure can be obtained.

A 4S diesel engine, when running at 2000 rpm has an injection duration of 1.5 ms.What is the corresponding of the crank angle in degrees? (a) 18° (b) 9° (c)36° (d) 15°

Description : A 4S diesel engine, when running at 2000 rpm has an injection duration of 1.5 ms.What is the corresponding of the crank angle in degrees? (a) 18° (b) 9° (c)36° (d) 15°

Last Answer : Ans :a

Which of the following factors increases the tendency of knocking in the CI engines? (a) Increasing both the r and coolant temperatures (b) Increasing both the speed and the injection advance (c) Increasing the speed, injection advance and coolant temperature (d) Increasing the compression ratio

Description : Which of the following factors increases the tendency of knocking in the CI engines? (a) Increasing both the r and coolant temperatures (b) Increasing both the speed and the injection advance (c) Increasing the speed, injection advance and coolant temperature (d) Increasing the compression ratio

Last Answer : Ans :c

The tendency of knocking in CI engine reduces by (a) High self ignition temperature of fuel (b) Decrease in jacket water temperature (c) Injection of fuel just before TDC (d) Decrease in injection pressure

Description : The tendency of knocking in CI engine reduces by (a) High self ignition temperature of fuel (b) Decrease in jacket water temperature (c) Injection of fuel just before TDC (d) Decrease in injection pressure

Last Answer : Ans :c

In a 4 S diesel engine, the term ‘squish’ refers to the (a) Injection of fuel in the precombustion chamber (b) Discharge of gases from the precombustion chamber (c) Entry of air into the combustion chamber (d) Stripping of fuel from the core

Description : In a 4 S diesel engine, the term ‘squish’ refers to the (a) Injection of fuel in the precombustion chamber (b) Discharge of gases from the precombustion chamber (c) Entry of air into the combustion chamber (d) Stripping of fuel from the core

Last Answer : Ans :c

The process of breaking up a liquid into fine droplets by spraying is called a. vaporization b. carburetion c. injection d. atomization

Description : The process of breaking up a liquid into fine droplets by spraying is called a. vaporization b. carburetion c. injection d. atomization

Last Answer : ANSWER d. atomization

Rate of burning in the compression ignition engine can be controlled by a. rate of injection of fuel b. rate of air taken into carburetor c. both a. and b. d. none of the above

Description : Rate of burning in the compression ignition engine can be controlled by a. rate of injection of fuel b. rate of air taken into carburetor c. both a. and b. d. none of the above

Last Answer : ANSWER a. rate of injection of fuel

Rotary compressors are used for delivering A. Small quantities of air at high pressure B. Large quantities of air at high pressure C. Small quantities of air at low pressure D. Large quantities of air at low pressure

Description : Rotary compressors are used for delivering A. Small quantities of air at high pressure B. Large quantities of air at high pressure C. Small quantities of air at low pressure D. Large quantities of air at low pressure

Last Answer : ANSWER : D

The maximum delivery pressure in a rotary air compressor is A. 10 bar B. 20 bar C. 30 bar D. 50 bar

Description : The maximum delivery pressure in a rotary air compressor is A. 10 bar B. 20 bar C. 30 bar D. 50 bar

Last Answer : ANSWER : A

In compression ignition engines, swirl denotes a. Haphazard motion of the gases in the cylinder b. Rotary motion of the gases in the cylinder. c. Radial motion of the gases in the cylinder. d. None of the above

Description : In compression ignition engines, swirl denotes a. Haphazard motion of the gases in the cylinder b. Rotary motion of the gases in the cylinder. c. Radial motion of the gases in the cylinder. d. None of the above

Last Answer : ANSWER a. Haphazard motion of the gases in the chamber

If a heat pump cycle operates between the condenser temperature of +27°C and evaporator temperature of - 23°C,then the Carnot COP will be (a) 0.2 (b) 1.2 (c) 5 (d) 6

Description : If a heat pump cycle operates between the condenser temperature of +27°C and evaporator temperature of - 23°C,then the Carnot COP will be (a) 0.2 (b) 1.2 (c) 5 (d) 6

Last Answer : Ans: d

In a naturally aspirated diesel engine, the air is supplied by a A. supercharger B. centrifugal pump C. movement of engine piston D. reciprocating pump

Description : In a naturally aspirated diesel engine, the air is supplied by a A. supercharger B. centrifugal pump C. movement of engine piston D. reciprocating pump

Last Answer : ANSWER : C

Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Description : Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Last Answer : ANSWER : C

The air-fuel ratio of the petrol engine is governed by A. fuel pump B. governor C. carburetor D. injector

Description : The air-fuel ratio of the petrol engine is governed by A. fuel pump B. governor C. carburetor D. injector

Last Answer : ANSWER : C

Boiler feed water pump is usually a __________ pump.(A) Reciprocating (B) Gear (C) Multistage centrifugal (D) Diaphragm

Description : Boiler feed water pump is usually a __________ pump. (A) Reciprocating (B) Gear (C) Multistage centrifugal (D) Diaphragm

Last Answer : (C) Multistage centrifugal

A hand pump is usually fitted: a. For ground servicing purposes b. Lowering the landing gear in an emergency c. Pressurising the oleo struts in the air d. Retracting the gear after take-off

Description : A hand pump is usually fitted: a. For ground servicing purposes b. Lowering the landing gear in an emergency c. Pressurising the oleo struts in the air d. Retracting the gear after take-off

Last Answer : a. For ground servicing purposes

A hand pump is usually fitted: a. For ground servicing purposes b. Lowering the landing gear in an emergency c. Pressurising the oleo struts in the air d. Retracting the gear after take-off

Description : A hand pump is usually fitted: a. For ground servicing purposes b. Lowering the landing gear in an emergency c. Pressurising the oleo struts in the air d. Retracting the gear after take-off

Last Answer : a. For ground servicing purposes

Draining of shallow pits or sump is done by a sump pump, which is a __________ pump. (A) Single stage vertical (B) Centrifugal (C) Plunger (D) Diffuser

Description : Draining of shallow pits or sump is done by a sump pump, which is a __________ pump. (A) Single stage vertical (B) Centrifugal (C) Plunger (D) Diffuser

Last Answer : (A) Single stage vertical

A hydraulic accumulator comprises of (A) A storage device and a control valve (B) A cylinder and a plunger (C) Two pistons and two cylinders (D) A storage tank and a ram pump

Description : A hydraulic accumulator comprises of (A) A storage device and a control valve (B) A cylinder and a plunger (C) Two pistons and two cylinders (D) A storage tank and a ram pump

Last Answer : (B) A cylinder and a plunger

Bucket type sprayer consist of: i) Single and double acting pump c) Plunger type pump j) Centrifugal pump d) All are correct

Description : Bucket type sprayer consist of: i) Single and double acting pump c) Plunger type pump j) Centrifugal pump d) All are correct

Last Answer : Single and double acting pump

Bucket type sprayer consist of: A. Single and double acting pump B. Centrifugal pump C. Plunger type pump D. All are correct

Description : Bucket type sprayer consist of: A. Single and double acting pump B. Centrifugal pump C. Plunger type pump D. All are correct

Last Answer : Single and double acting pump

The value of COP in vapour compression cycle is usually (a) always less than unity (b) always more than unity (c) equal to unity (d) any one of the above

Description : The value of COP in vapour compression cycle is usually (a) always less than unity (b) always more than unity (c) equal to unity (d) any one of the above

Last Answer : Ans: b

Refrigeration in aeroplanes usually employs the following refrigerant (a) Co2 (b) Freon-11 (c) Freon-22 (d) Air

Description : Refrigeration in aeroplanes usually employs the following refrigerant (a) Co2 (b) Freon-11 (c) Freon-22 (d) Air

Last Answer : Ans: d

Engine pistons are usually made of aluminium alloy because it A. is lighter B. wears less C. Stronger D. absorbs shocks

Description : Engine pistons are usually made of aluminium alloy because it A. is lighter B. wears less C. Stronger D. absorbs shocks

Last Answer : ANSWER : A

Engine pistons are usually made of aluminium alloy as it a. is lighter b. wears less c. absorbs shocks d. is stronger

Description : Engine pistons are usually made of aluminium alloy as it a. is lighter b. wears less c. absorbs shocks d. is stronger

Last Answer : ANSWER a. is lighter

The back pressure of petrol engine is usually a. 1 ata b. 1.2 ata c. 0.8 ata d. 2 ata.

Description : The back pressure of petrol engine is usually a. 1 ata b. 1.2 ata c. 0.8 ata d. 2 ata.

Last Answer : ANSWER b. 1.2 ata

Scavenging is usually done to increase the a. thermal efficiency b. speed c. power output d. fuel consumption

Description : Scavenging is usually done to increase the a. thermal efficiency b. speed c. power output d. fuel consumption

Last Answer : ANSWER c. power output

A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel cycle is higher than the Otto cycle, at a fixed compression ratio c. The compression ratio of a diesel engine is higher than that of an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Description : A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel ... an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Last Answer : ANSWER c. The compression ratio of a diesel engine is higher than that of an S.I engine

Compare sequential, continuous grouped and simultaneous methods of fuel injection.

Description : Compare sequential, continuous grouped and simultaneous methods of fuel injection.

Last Answer : Sequential fuel injection (SFI):-Injection of fuel occurs at the same time for all cylinders every revolution of the crankshaft. Therefore, fuel is injected twice within each four-stroke cycle. ... refers to the first three methods of injection, for continuous injection diagram is not needed)

A device mounted on the injection pump which is use to lift fuel from the tank to the injection system?

Description : A device mounted on the injection pump which is use to lift fuel from the tank to the injection system?

Last Answer : Electric fuel pumps

Poisons like cyanide inhibit Na+ efflux and K+ influx during cellular transport. This inhibitory effect is reversed by an injection of ATP. This demonstrates that (a) ATP is the carrier protein in the transport system (b) energy for Na+-K+ exchange pump comes from ATP (c) ATP is hydrolysed by ATPase to release energy (d) Na+-K+ exchange pump operates in the cell.

Description : Poisons like cyanide inhibit Na+ efflux and K+ influx during cellular transport. This inhibitory effect is reversed by an injection of ATP. This demonstrates that (a) ATP is the carrier protein in the ... is hydrolysed by ATPase to release energy (d) Na+-K+ exchange pump operates in the cell.

Last Answer : (b) energy for Na+-K+ exchange pump comes from ATP