The calorific value of 'LPG' (50% propane + 50% butane) is about
__________ kcal/Nm3
.
(A) 5000
(B) 25,000
(C) 10,000
(D) 15,000

1 Answer

Answer :

(B) 25,000

Related questions

Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3 ), while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F. gas and coke oven gas

Last Answer : (A) Propane and acetylene

Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3) while the C.V. is same on weight basis (i.e., kcal/kg)? (A ... and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F gas and coke oven gas

Last Answer : D) B.F gas and coke oven gas

Description : Pick out the wrong statement. (A) Main constituents of LPG are propane and butane (B) C.V. of natural gas is about 10000 KCal/Nm3 (C) C.V. of LPG is about 26000 kcal/Nm3 (11500 kcal/kg) (D) L.P.G. is lighter than air

Last Answer : (D) L.P.G. is lighter than air

Description : The calorific value of natural gas is about __________ kcal/Nm3 . (A) 10,000 (B) 2,500 (C) 25,000 (D) 35,000

Last Answer : (A) 10,000

Description : Which of the following has the highest calorific value (kcal/Nm3 )? (A) Carburetted water gas (B) Gobar gas (C) Natural gas (D) LPG

Last Answer : (D) LPG

Description : Calorific value of gobar gas (containing CH4 = 60% , H2 = 10% ; CO2 = 30%) may be about __________ Kcal/Nm3 . (A) 1,800 (B) 3,200 (C) 5,400 (D) 10,200

Last Answer : (C) 5,400

Description : Calorific value of wood gas is about __________ kcal/Nm3 . (A) 1500 (B) 3300 (C) 5400 (D) 8500

Last Answer : (B) 3300

Description : The calorific value of L.D. converter gas is about __________ Kcal/Nm3 . (A) 1800 (B) 800 (C) 4500 (D) 10000

Last Answer : (A) 1800

Description : The calorific value of producer gas is around __________ kcal/Nm3 . (A) 1300 (B) 500 (C) 4500 (D) 9000

Last Answer : (A) 1300

Description : Calorific value of coke even gas produced by low temperature carbonisation of coal is about __________ Kcal/Nm3 . (A) 4000 (B) 2500 (C) 6500 (D) 10000

Last Answer : (C) 6500

Description : Calorific value of coke oven gas is around __________ Kcal/Nm3 . (A) 900 (B) 4200 (C) 7500 (D) 2000

Last Answer : (B) 4200

Description : Calorific value of blast furnace gas is around __________ KCal/Nm3 . (A) 850 (B) 1800 (C) 4200 (D) 6500

Last Answer : (A) 850

Description : Calorific value of furnace oil is about __________ Kcal/kg. (A) 10,000 (B) 15,000 (C) 5,000 (D) 20,000

Last Answer : (A) 10,000

Description : Natural gas recovered along with crude oil from oil wells is called wet natural gas which has a higher __________ compared to the dry natural gas. (A) Unsaturated hydrocarbon content (B) Calorific value (C) Quantity of propane (D) Quantity of butane

Last Answer : (B) Calorific value

Description : Which of the following has the least calorific value (kcal/Nm3 )? (A) Blast furnace gas (B) Coke oven gas (C) Sewage gas (D) Natural gas

Last Answer : (A) Blast furnace gas

Description : Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on ... plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification

Last Answer : (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification

Description : Which of the following gaseous fuels has the highest net calorific value (kcal/Nm3 )? (A) Producer gas (B) Carburetted water gas (C) Natural gas (D) Liquefied petroleum gas

Last Answer : (D) Liquefied petroleum gas

Description : Calorific value of dry wood may be around __________ Kcal/kg. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (A) 5

Description : Liquefied petroleum Gas (LPG) used for the household cooking comprises mainly of (A) Propane & butane (B) Butane & ethane (C) Methane & ethane (D) Methane & carbon monoxide

Last Answer : (A) Propane & butane

Description : Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Last Answer : (A) Propane & butane

Description : 'GASOHOL' widely used in Brazil as a motor fuel is a mixture of alcohol and (A) Petrol (B) LPG (C) Light hydrocarbon gases (e.g. butane or propane) (D) None of these

Last Answer : (A) Petrol

Description : What is the proportion of Propane and Butane gas in LPG Cylinder?

Last Answer : In Australia, England, and the United States, it's 100% propane. In New Zealand and Belgium, it's 60% propane and 40% butane. In India, Spain, and Hungary, it's 35% propane and 65% butane. In ... on climate. Some even change the ration based on the season. But it is never less than 20% propane.

Description : LPG is a mixture of (a) carbon monoxide and carbon dioxide (b) butane and propane (c) methane and ethylene (d) carbon dioxide and oxygen

Last Answer : Ans:(b)

Description : Which of the following is the major constituent of LPG? (1) Methane (2) Ethane (3) Propane (4) Butane

Last Answer : (4) Butane Explanation: Butanes are highly flammable, colourless, easily liquefied gases. When blended with propane and other hydrocarbons, it is referred to commercially as LPG, for liquefied petroleum gas.

Description : The major component in the LPG is - (1) methane (2) butane (3) ethane (4) propane

Last Answer : (2) butane Explanation: Butanes are highly flammable, colourless, easily liquefied gases. When blended with propane and other hydrocarbons, it is referred to commercially as LPG, for liquified petroleum gas. It is used as a petrol component.

Description : Which hydrocarbons are the major constituents of 'LPG'? (1) Methane and Ethane (2) Propane and Butane (3) Pentane and Benzene (4) Only Methane

Last Answer : (2) Propane and Butane Explanation: Cooking gas, also known as Liquefied Petroleum Gas (LPG) is primarily propane (C3Hg) and butane (C4H10).

Description : Which of the following is the major constituent of LPG? (1) Methane (2) Ethane (3) Propane (4) Butane

Last Answer : Butane

Description : The major component in the LPG is (1) methane (2) butane (3) ethane (4) propane

Last Answer : butane

Description : Which of the following is chiefly present in LPG (Liquefied Petroleum Gas) ? (1) Methane (2) Ethane (3) Propane (4) Butane

Last Answer : Butane

Description : C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Last Answer : (D) May increase or decrease, depends on combustibles

Description : Pick out the wrong statement. (A) Aromatics have higher specific gravity than paraffins (B) Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ρ 2 ) where, ρ is the specific gravity ... volume basis (i.e., Kcal/litre) (D) Higher specific gravity of petrofuels means higher C/H ratio

Last Answer : (C) Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre)

Description : Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000

Last Answer : (B) 2000

Description : Gas yield in the Kopper-Totzek coal gasifier is about __________ Nm3 /ton coal (ash = 35%). (A) 150 (B) 1500 (C) 3500 (D) 5000

Last Answer : (C) 3500

Description : Calorific value of bituminous coal may be around __________ Kcal/kg. (A) 500 (B) 1500 (C) 6500 (D) 20000

Last Answer : (C) 6500

Description : Calorific value of tar is about __________ Kcal/kg. (A) 8800 (B) 12000 (C) 14000 (D) 16000

Last Answer : (A) 8800

Description : Calorific value of a typical dry anthracite coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 8000 (D) 15000

Last Answer : (C) 8000

Description : A 3 L gas mixture of propane `(C_(3)H_(8))` and butane `(C_(4)H_(10))` on complete combustion at 25 C produced 10 L `CO_(2.)` Assuming constant P and

Last Answer : A 3 L gas mixture of propane `(C_(3)H_(8))` and butane `(C_(4)H_(10))` on complete combustion at 25 C ... .5L` D. `C_(3)H_(8),0LandC_(4)H_(10),3L`

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Description : The calorific value of lipid is (A) 4.0 Kcal/gm (B) 6.0 Kcal/gm (C) 9.0 Kcal/gm (D) 15 Kcal/gm

Last Answer : Answer : C

Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Last Answer : (D) 5000-15000

Description : Calorific value of coal middling generated in coal washeries during washing of coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 6000 (D) 8000

Last Answer : (B) 4000

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

Description : Calorific value of pitch creosote mixture (PCM) i.e., C.T.F.-200 is about (A) 8800 kcal/m3 (B) 8800 kcal/kg (C) Same as that of coal middling (D) 25000 kcal/kg

Last Answer : (B) 8800 kcal/kg

Description : Which of the following fuels has the highest calorific value per unit mass (kcal/kg)? (A) Coal (B) Kerosene (C) Natural gas (D) Furnace oil

Last Answer : (D) Furnace oil

Description : Ethyl mercaptan is added to the Doctor negative LPG for facilitating the detection of its leakage (by bad odour) to the extent of about __________ ppm. (A) 1 (B) 50 (C) 5000 (D) 10000

Last Answer : (B) 50

Description : Mercaptans are added to liquefied petroleum gas (LPG) to (A) Reduce its cost (B) Narrow down its explosion limit (C) Assist in checking its leakage from cylinder (D) Increase its calorific value

Last Answer : (C) Assist in checking its leakage from cylinder

Description : Which of the following fuel gases has the highest calorific value? (A) Natural gas (B) Coal bed methane (CBM) (C) Liquefied petroleum gas (LPG) (D) Sewage gas

Last Answer : (C) Liquefied petroleum gas (LPG)

Description : Pick out the wrong statement. (A) High concentration of oxygen in flue gas means high stack loss (B) Gaseous fuels require the least % excess air for complete combustion (C) The ratio of fixed carbon to ... coal is called its 'fuel ratio' (D) Calorific value of natural gas is more than that of LPG

Last Answer : (D) Calorific value of natural gas is more than that of LPG

Description : Which of the following gaseous fuels is likely to have the highest gross calorific value? (A) Sewage gas (B) LPG (C) Producer gas (D) Natural gas

Last Answer : (B) LPG

Description : The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2

Last Answer : (B) 1-1.5