Shaving soaps are
(A) Soft potassium soaps (potassium salt of fatty acid) with free Stearic acid
to give lather a lasting property
(B) Metallic soaps compounded with frothing agents
(C) High free alkali soaps having excess of cane sugar and alcohol
(D) None of these

1 Answer

Answer :

(A) Soft potassium soaps (potassium salt of fatty acid) with free Stearic acid
to give lather a lasting property

Related questions

Description : Transparent soaps (e.g. Pears) are (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency (B) ... (C) Metallic soaps with frothing agent from which glycerine has not been recovered (D) None of these

Last Answer : (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency

Description : (3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic a big drawback of washing with soap is that the minerals in water ... ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Last Answer : What is the objective of the 'Kyoto Protocol'? (1) To abolish child labour (2) To eliminate nuclear weapons (3) To increase ground water levels (4) To reduce greenhouse gases

Description : (3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic. a big drawback of washing with soap is that the minerals in water ... ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Last Answer : Cement is usually a mixture of – (1) Calcium silicate and calcium alurninate (2) Calcium silicate and calcium ferrate (3) Calcium aluminate and calcium ferrate (4) Lime stone and silicon dioxide

Description : The advantage of detergents over soaps is (1) Detergents are soluble in water (2) Detergents could not give much lather (3) Detergents give lather even with hard water (4) Soaps give lather with only soft water

Last Answer : Detergents give lather even with hard water

Description : What are soaps? (1) Salts of silicates (2) Ester of heavy fatty acids (3) Sodium or potassium salts of heavier fatty acids (4) Mixture of glycerol and alcohol

Last Answer : (3) Sodium or potassium salts of heavier fatty acids

Description : Sodium salt of higher molecular weight fatty acid is termed as the __________ soap. (A) Hard (B) Soft (C) Metallic (D) Lubricating

Last Answer : (B) Soft

Description : Metallic soap is __________ salt of fatty acids. (A) Sodium (B) Potassium (C) Both sodium & potassium (D) Aluminium or calcium

Last Answer : (D) Aluminium or calcium

Description : Pick out the wrong statement. (A) Eosin requirement in tallow soap is about 40-50% which fastens the lather formation, softens the hard soaps and increases its cleansing action (B) Soap powder is ... ., Benzotriazole) is added in soap to facilitate the removal of stains due to tea, blood etc

Last Answer : (D) Tarnish inhibitor (e.g., Benzotriazole) is added in soap to facilitate the removal of stains due to tea, blood etc

Description : The substance whose aqueous solution would be a better conductor of electricity than water is (a) cane sugar (b) glucose (c) common salt (d) ethyl alcohol

Last Answer : Ans:(c)

Description : Soaps come in different colours. But why is soap's lather always white in colour?

Last Answer : Lather or foam is nothing but a large collection of small soap bubbles. A soap bubble is , in turn, a very thin film of soap solution enclosing some air. Because of the low surface tension of ... collection of bubbles gets scattered. That is the reason why all kinds of lather or foam appear white.

Description : An alkali metal salt of Palmitic acid is known as (A) Soap (B) Metallic soap (C) Detergent (D) Alkaloid

Last Answer : (B) Metallic soap

Description : . Sodium or potassium salts of fatty acids are called (a) Proteins (b) Terpenes (c) Carbohydrates (d) Soaps

Last Answer : Soaps

Description : Which of the following additives/water proofing agents is added to lower the hydrophilic (moisture loving) characteristic of cement? (A) Xanthates (B) Stearic acid (C) Calcium & aluminium stearate (D) Formic acid

Last Answer : (C) Calcium & aluminium stearate

Description : Which of the following is an unsaturated fatty acid? (A) Lauric acid (B) Palmitic acid (C) Stearic acid (D) Oleic acid

Last Answer : (D) Oleic acid

Description : __________ acid is an unsaturated fatty acid. (A) Palmitic (B) Oleic (C) Stearic (D) Oxalic

Last Answer : (B) Oleic

Description : Which of the following is a metallic salt of a fatty acid? Is it: w) soap x) plastic y) rubber z) petroleum

Last Answer : ANSWER: A -- SOAP

Description : A fatty acid which is not synthesized in human body and has to be supplied in the diet is (A) Palmitic acid (B) Oleic acid (C) Linoleic acid (D) Stearic acid

Last Answer : Answer : C

Description : A fatty acid not synthesized in man is (A) Oleic (B) Palmitic (C) Linoleic (D) Stearic

Last Answer : Answer : C

Description : A fatty acid which is not synthesized in human body and has to be supplied in the diet: (A) Palmitic acid (B) Oleic acid (C) Linoleic acid (D) Stearic acid

Last Answer : Answer : C

Description : Which of the following is a hydroxy fatty acid? (A) Oleic acid (B) Ricinoleic acid (C) Caproic acid (D) Stearic acid

Last Answer : Answer : B

Description : Which of the following is not an unsaturated fatty acid? (A) Oleic acid (B) Stearic acid (C) Linaoleic acid (D) Palmitic acid

Last Answer : Answer : B

Description : Palmitic, oleic or stearic acid ester of cholesterol used in manufacture of cosmetic creams is (A) Elaidic oil (B) Lanoline (C) Spermaceti (D) Chaulmoogric oil FATS AND FATTY ACID METABOLISM 75

Last Answer : Answer : B

Description : In humans, a dietary essential fatty acid is (A) Palmitic acid (B) Stearic acid (C) Oleic acid (D) Linoleic acid

Last Answer : Answer : D

Description : Why is Stearic acid a saturated fatty acid?

Last Answer : Stearic acid does not contain double bonds in its carbon atom hence it is a saturated fatty acid.

Description : Which is the saturated fatty acid of the following – a) Stearic acid b) Arachidonic acid c) Oleic acid d) Linoleic acid

Last Answer : a) Stearic acid

Description : Candle is a mixture of (1) Paraffin was and stearic acid (2) Bees wax and stearic acid (3) Higher fatty acids and stearic acid (4) Bees wax and paraffin wax

Last Answer :  Paraffin was and stearic acid

Description : The following statement(s) is/are true concerning initial microbiologic diagnostic techniques. a. Appropriate expeditious transport of specimens to the microbiology laboratory is essential for obtaining accurate ... a 4-to 8-fold increase over the MIC to be considered clinically efficacious.

Last Answer : Answer: a, c, d Because most surgical infections are polymicrobial, specimens should be cultured for aerobic and anaerobic bacteria, as well as fungi. Although aerobic and aerotolerant ... fold increase over MIC during the peak serum level have been demonstrated to be clinically efficacious

Description : Sugar cane canbe fermented to make ______. a. Methane gas. b. Alcohol. c. Electricity. d. All of the above.

Last Answer : b. Alcohol.

Description : Hardness of water is caused by  (A) Presence of soap lather  (B) Presence of chlorides and sulphates of sodium and potassium  (C) Presence of bicarbonates, sulphates or chlorides of calcium and magnesium  (D) Turbidity 

Last Answer : (C) Presence of bicarbonates, sulphates or chlorides of calcium and magnesium 

Description : Tall oil obtained as a by-product from the black liquor recovery is (A) A black, sticky & viscous liquid (B) Used in the manufacture of greases, emulsions & soaps (C) Composed mainly of rosin & fatty acids (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : Phenolic antiseptics are added in the __________ soap. (A) Shaving (B) Medicated (C) Metallic (D) Transparent

Last Answer : (B) Medicated

Description : A cane sugar factory having sugar production rate of 10 tons/day will produce about __________ tons/day of bagasse (after consumption by the factory for heating etc.). (A) 1 (B) 10 (C) 25 (D) 40

Last Answer : (B) 10

Description : Buffer solutions have constant acidity and alkalinity because: (1) they have fixed value of pH (2) these give unionised acid or base on reaction with added acid or alkali (3) acids and alkalies in these solutions are shielded from attack by other ions (4) they have large excess of H+ or OH– ions

Last Answer : these give unionised acid or base on reaction with added acid or alkali

Description : Soft fats in milk fat are:- a. Lauric & Stearic b. Capric & Lauric c. Oleic & Butyric d. Oleic & Lauric

Last Answer : c. Oleic & Butyric

Description : A certain thickness of the coal, if stored unscientifically on soft (katcha) ground having no metallic/concrete flooring gets sunked into the ground, which is termed as the 'carpet loss'. The carpet loss may be of the order of __________ cms. (A) 1 to 2 (B) 3 to 4 (C) 5 to 15 (D) 20 to 40

Last Answer : (C) 5 to 15

Description : High magnesia lime is added to hot sugar cane juice (during the manufacture of sugar) to (A) Flocculate the impurities (B) Facilitate fast filtration (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Description : Vinegar made by fermentation from cane sugar contains – (1) palmitic acid (2) lactic acid (3) citric acid (4) acetic acid

Last Answer : (4) acetic acid Explanation: Vinegar is a liquid substance consisting mainly of acetic acid (CH3CO2H) and water, the acetic acid being produced through the fermentation of ethanol by acetic ... are still promoted today. Commercial vinegar is produced either by fast or slow fermentation processes.

Description : Vinegar made by fermentation from cane sugar contains (1) palmitic acid (2) lactic acid (3) citric acid (4) acetic acid

Last Answer : acetic acid

Description : 0.257g of organic substance was heated with conc. sulphuric acid and then distilled with excess of strong alkali .the ammonia gas evolved was absorbed in 50ml of .1M HCl which required 23.2ml of c for neutralization at the end of the process. Determine the % of nitrogen in the compound ?

Last Answer : A. Vol of 0 .1M HCl taken = 50ml Vol of .1MNaOH used for neutralization of unused acid=23.2ml Now, 23.2 ml of .1MNaOH =23.2ml of .1MHCl Vol of .1MHCl unused=23.2ml Vol of .1MHCl required ... NH3 solution contain nitrogen = 14*26.8/10*1000 Percentage of Nitrogen=14*26.8*100/10*1000*.257 =14.6%

Description : : Which of the following is a common bisphenol in widespread use in antibacterial soaps? a. Chlorhexidine b. Betadine c. Triclosan d. Alcohol

Last Answer : c. Triclosan

Description : What are the benefits of using dead sea salt soaps?

Last Answer : Benefits of using dead sea salt is in increasing circulation and drawing the toxins out of you pores. Dead sea salt also helps with exfoliation of your skin.

Description : Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Last Answer : (A) Ethylene glycol

Description : Which of the following compounds will react with Tollens' reagent to give metallic silver? (a) Formic acid (b) Ethyl alcohol (c) Acetic acid (d) Acetone

Last Answer : Formic acid

Description : Soft Shave is a shaving cream aimed particularly at women. The activities and decisions involved an developing and maintaining the product concept in buyers minds is called: A)the promotion mix B)the product mix C)product positioning D)product promotion E)product development

Last Answer : C)product positioning

Description : Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Last Answer : (B) Copper

Description : The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Last Answer : (B) Cast iron

Description : Inversion of cane sugar is an example of (A) Unimolecular reaction with first order (B) Bimolecular reaction with second order (C) Bimolecular reaction with first order (D) Unimolecular reaction with second order

Last Answer : (C) Bimolecular reaction with first order

Description : Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95 (D) 80

Last Answer : (C) 95

Description : . Sucrose content in the raw juice extracted from sugar cane is about __________ percent (B) 15 - 20 (A) 1 - 2285 (C) 50 - 60 (D) 80 - 85

Last Answer : (B) 15 - 20

Description : Sugar content in sugarcane on cane basis is about __________ percent by weight. (A) 1 to 5 (B) 5 to 10 (C) 15 to 20 (D) 20 to 30

Last Answer : (B) 5 to 10